Power for operating machinery in printing houses, a treatise on the methods of applying power to printing presses and allied machinery, with particular reference to electric drive./

Mode of access: Internet.

Platen printing presses, a primer of information regarding the history & mechanical construction of platen printing presses, from the original hand press to the modern job press, to which is added a chapter on automatic presses of small size,

"Supplementary reading": p. 34.

A little gossip about printing /

Mode of access: Internet.

Operator, organizational, direct support, and general support maintenance manual : printing press, offset, web-fed, motor driven, 208V, 60 hertz, Hess and Barker model 3CX, FSN 3610-617-7566.

Includes index.

Measurement and Improvement of Wet Paper Web Strength

Various strength properties of paper are measured to tell how well it resists breaks in a paper machine or in printing presses. The most often measured properties are dry tensile strength and dry tear strength. However, in many situations where paper breaks, it is not dry. For example, in web breaks after the wet pressing the dry matter content can be around 45%. Thus, wet-web strength is often a more critical paper property than dry strength. Both wet and dry strength properties of the samples were measured with a L&W tensile tester. Originally this device was not designed for the measurement of the wet web tensile strength, thus a new procedure to handle the wet samples was developed. The method was tested with Pine Kraft (never dried). The effect of different strength additives on the wet-web and dry paper tensile strength was studied. The polymers used in this experiment were aqueous solution of a cationic polyamidoamine-epichlorohydrin resin (PAE), cationic hydrophilised polyisocyanate and cationic polyvinylamine (PVAm). From all three used chemicals only Cationic PAE considerably increased the wet web strength. However it was noticed that at constant solids content all chemicals decreased the wet web tensile strength. So, since all chemicals enhanced solid content it can be concluded that they work as drainage aids, not as wet web strength additives. From all chemicals only PVAm increased the dry strength and two other chemicals even decreased the strength. As chemicals were used in strong diluted forms and were injected into the pulp slurry, not on the surface of the papersheets, changes in samples densities did not happen. Also it has to be noted that all these chemicals are mainly used to improve the wet strength after the drying of the web.

Studies in offset ink setting

The offset printing process is complex and involves the meeting of two essentially complex materials, printing ink and paper, upon which the final product is formed. It can therefore be expected that a multitude of chemical and physical interactions and mechanisms take place at the ink-paper interface. Interactions between ink and paper are of interest to both the papermakers and ink producers, as they wish to achieve better quality in the final product. The objective of this work is to clarify the combined influence of paper coating structure, printing ink and fountain solution on ink setting and the problems related to ink setting. A further aim is to identify the mechanisms that influence ink setting problems, and to be able to counteract them by changing properties of the coating layer or by changing the properties of the ink. The work carried out for this thesis included use of many techniques ranging from standard paper and printability tests to advanced optical techniques for detection of ink filaments during ink levelling. Modern imaging methods were applied for assessment of ink filament remain sizes and distribution of ink components inside pigment coating layers. Gravimetric filtration method and assessment of print rub using Ink-Surface-Interaction-Tester (ISIT) were utilized to study the influence of ink properties on ink setting. The chemical interactions were observed with the help of modified thin layer chromatography and contact angle measurements using both conventional and high speed imaging. The results of the papers in this thesis link the press operational parameters to filament sizes and show the influence of these parameters to filament size distribution. The relative importance between the press operation parameters was shown to vary. The size distribution of filaments is important in predicting the ink setting behaviour, which was highlighted by the dynamic gloss and ink setting studies. Prediction of ink setting behaviour was also further improved by use of separate permeability factors for different ink types in connection to filtration equations. The roles of ink components were studied in connection to ink absorption and mechanism of print rub. Total solids content and ratio of linseed oil to mineral oil were found to determine the degree of print rub on coated papers. Wax addition improved print rub resistance, but would not decrease print rub as much as lowering the total solids content in the ink. Linseed oil was shown to absorb into pigment coating pores by mechanism of adsorption to pore walls, which highlights the need for sufficient pore surface area for improved chromatographic separation of ink components. These results should help press operators, suppliers of printing presses, papermakers and suppliers to papermakers, to better understand the material and operating conditions of the press as it relates to various print quality issues. Even though paper is in competition with electronic media, high quality printed products are still in demand. The results should provide useful information for this segment of the industry.

Troubleshooting med avseende på avsättningar på gummiduk, Bobergs tryckeri AB

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink. Deposits from image areas contain pigment and talc from the printingink. The dampening water has also been analyzed. The result shows some sort of problem with thehardness regulator for the clean water. The pH-level should be increased a few steps.

Kvalitetssäkring av Clas Ohlson AB´s grafiska produktionsflöde

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow. Wrong colorspaces andCMYK-profiles was used in big extent, the displays where uncalibrated or incorrectly calibrated, wrong PDF-presetswas used frequently and it also showed that six different suppliers for their printing materials were used. The solutionsthat were relevant for the problems and defects were later on presented as proposals on measures.

Variabeltryck med inkjet i dagspress : Möjligheten att införa anpassade upplagor

På uppdrag av Tidningsutgivarna har en studie utförts angående olika möjligheter att införa tryck av variabeldata med tryckmetoden inkjet i svensk dagspress. Målet var att undersöka tekniska möjligheter och begränsningar samt att utreda om det fanns något intresse på marknaden som skulle kunna ge någon avkastning. Studien utfördes med hjälp av noggranna källstudier och ett fortlöpande samarbete med olika företag med intresse för dagspress. Rapporten beskriver också företag som arbetar med den här typen av innovationer idag och diverse tidigare projekt med variabeltryckta tidningar. Nya teknologier som eventuellt kan vara av intresse för framtida utveckling har också beskrivits och hur tidningens framtid kommer att se ut ur ett kortare och ett längre perspektiv. Studien visar att inkjetpressar inte klarar av den hastighet som de moderna tidningspressarna håller idag. Men i takt med minskade upplagor och utvecklad teknologi, samt ett stort marknadsmässigt intresse så tyder det på att det kommer att finnas möjlighet att tillverka anpassade digitaltryckta tidningsupplagor inom en överskådlig framtid. Inkjet kan fungera som ett bra komplement till offset. Inlinepressar ger möjligheten att införa variabeltryck i stora tidningsupplagor medan separata inkjetpressar passar bra för tryck av mindre lokala upplagor.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

Fifty rare and important books ... Books from the first two centuries of printing, incunabula from famous presses, Americana ...

"Catalogue XXI."

The printer's complete guide : containing a sketch of the history and progress of printing, to its present state of improvement; details of its several departments; numerous schemes of imposition; modern improvements in stereotype, presses, and machinery, &c &c. /

"The following pages are from a larger work ... entitled The mechanics' gallery of science and art", of which only v. 1 was ever published.

The bibliographer's manual of English literature containing an account of rare, curious, and useful books, published in or relating to Great Britain and Ireland, from the invention of printing; with bibliographical and critical notices, collations of the rarer articles, and the prices at which they have been sold.

Vol. 6 has special title: Appendix to the Bibliographer's manual of English literature. Containing an account of books issued by literary and scientific societies and printing clubs; books printed at private presses; privately printed series; and the principal literary and scientific serials. Comp. by Henry G. Bohn ...

A complete catalogue of all the publications of the Elzevier Presses at Leyden, Amsterdam, The Hague, and Utrecht : with introduction, notes, and an appendix containing a list of all works, whether forgeries or anonymous publications, generally attributed to these presses /

"This edition is limited to 275 small-paper copies, and 75 large-paper copies"--T.p. verso.

Diffractive phase-shift lithography photomask operating in proximity printing mode

A phase shift proximity printing lithographic mask is designed, manufactured and tested. Its design is based on a Fresnel computer-generated hologram, employing the scalar diffraction theory. The obtained amplitude and phase distributions were mapped into discrete levels. In addition, a coding scheme using sub-cells structure was employed in order to increase the number of discrete levels, thus increasing the degree of freedom in the resulting mask. The mask is fabricated on a fused silica substrate and an amorphous hydrogenated carbon (a:C-H) thin film which act as amplitude modulation agent. The lithographic image is projected onto a resist coated silicon wafer, placed at a distance of 50 mu m behind the mask. The results show a improvement of the achieved resolution - linewidth as good as 1.5 mu m - what is impossible to obtain with traditional binary masks in proximity printing mode. Such achieved dimensions can be used in the fabrication of MEMS and MOEMS devices. These results are obtained with a UV laser but also with a small arc lamp light source exploring the partial coherence of this source. (C) 2010 Optical Society of America