Insignificant impact of prescribed fire on surface soil in a Pinus pinaster plantation, northern Portugal

Following a prescribed fire in a Pinus pinaster forest site located in the north-west Portugal, monitoring of any changes in selected soil characteristics and soil hydrology was undertaken to assess the effects of burning on the following: pH, electrical conductivity, water content, organic carbon and porosity. Thirty plots were established on a regular grid. At each sample plot before and after the fire, samples were collected (disturbed samples from depths of 0-1cm and 1-5cm; undisturbed core samples from 0-5cm). The results indicate that there was no measurable impact on the properties of the soil following this carefully conducted prescribed fire. The fire only affected the litter layer, as intended. Confirmation of this minimal impact on the soil was provided by regrowth of grasses and herbs already occurring two months after the fire. The implication is, therefore, that provided this wildfire-risk reduction strategy is carried out under existing strict guidelines, any impact on soil quality will be minimal.

Effects of prescribed fire on surface soil in a Pinus pinaster plantation, northern Portugal

In order to decrease the risk of severe wildfire, prescribed fire has recently been adopted in Portugal and elsewhere in the Mediterranean as a major tool for reducing the fuel load instead of manual or mechanical removal of vegetation. There has been some research into its impact on soils in shrublands and grasslands, but to date little research has been conducted in forested areas in the region. As a result, the impact of prescribed fire on the physico-chemical soil characteristics of forest soils has been assumed to be minimal, but this has not been demonstrated. In this study, we present the results of a monitoring campaign of a detailed pre- and post-prescribed fire assessment of soil properties in a long-unburnt P. pinaster plantation, NW Portugal. The soil characteristics examined were pH, total porosity, bulk density, moisture content, organic matter content and litter/ash quantity. The results show that there was no significant impact on the measured soil properties, the only effect being confined to minor changes in the upper 1 cm of soil. We conclude that provided the fire is carried out according to strict guidelines in P. pinaster forest, a minimal impact on soil properties can be expected.

Effects of prescribed fire on surface soil in a Pinus pinaster plantation, northern Portugal

In order to decrease the risk of severe wildfire, prescribed fire has recently been adopted in Portugal and elsewhere in the Mediterranean as a major tool for reducing the fuel load instead of manual or mechanical removal of vegetation. There has been some research into its impact on soils in shrublands and grasslands, but to date little research has been conducted in forested areas in the region. As a result, the impact of prescribed fire on the physico-chemical soil characteristics of forest soils has been assumed to be minimal, but this has not been demonstrated. In this study, we present the results of a monitoring campaign of a detailed pre- and post-prescribed fire assessment of soil properties in a long-unburnt P. pinaster plantation, NW Portugal. The soil characteristics examined were pH, total porosity, bulk density, moisture content, organic matter content and litter/ash quantity. The results show that there was no significant impact on the measured soil properties, the only effect being confined to minor changes in the upper 1 cm of soil. We conclude that provided the fire is carried out according to strict guidelines in P. pinaster forest, a minimal impact on soil properties can be expected.

Modeling height-diameter relationship in pinus pinaster ait. in the forest intervention zone of Lomba, NE-Portugal

In this work, the relationship between diameter at breast height (d) and total height (h) of individual-tree was modeled with the aim to establish provisory height-diameter (h-d) equations for maritime pine (Pinus pinaster Ait.) stands in the Lomba ZIF, Northeast Portugal. Using data collected locally, several local and generalized h-d equations from the literature were tested and adaptations were also considered. Model fitting was conducted by using usual nonlinear least squares (nls) methods. The best local and generalized models selected, were also tested as mixed models applying a first-order conditional expectation (FOCE) approximation procedure and maximum likelihood methods to estimate fixed and random effects. For the calibration of the mixed models and in order to be consistent with the fitting procedure, the FOCE method was also used to test different sampling designs. The results showed that the local h-d equations with two parameters performed better than the analogous models with three parameters. However a unique set of parameter values for the local model can not be used to all maritime pine stands in Lomba ZIF and thus, a generalized model including covariates from the stand, in addition to d, was necessary to obtain an adequate predictive performance. No evident superiority of the generalized mixed model in comparison to the generalized model with nonlinear least squares parameters estimates was observed. On the other hand, in the case of the local model, the predictive performance greatly improved when random effects were included. The results showed that the mixed model based in the local h-d equation selected is a viable alternative for estimating h if variables from the stand are not available. Moreover, it was observed that it is possible to obtain an adequate calibrated response using only 2 to 5 additional h-d measurements in quantile (or random) trees from the distribution of d in the plot (stand). Balancing sampling effort, accuracy and straightforwardness in practical applications, the generalized model from nls fit is recommended. Examples of applications of the selected generalized equation to the forest management are presented, namely how to use it to complete missing information from forest inventory and also showing how such an equation can be incorporated in a stand-level decision support system that aims to optimize the forest management for the maximization of wood volume production in Lomba ZIF maritime pine stands.

Morphobiometric and molecular characterization of Bursaphelenchus Fuchs, 1937 (Nematoda: Aphelenchoididae) species associated with Pinus pinaster Ainton in Portugal

Abstract - The genus Bursaphelenchus comprises almost 100 species mainly from the northern hemisphere, with conifers as the most important hosts. Among the various nematode species, the pine wood nematode (PWN), Bursaphelenchus xylophilus, is the casual agent of pine wilt disease (PWD), and the most important forest pest for pines worldwide, classified as an A1 quarantine organism within the European Union. In 1999 this nematode was detected for the first time in Portugal and Europa associated with maritime pine, Pinus pinaster. Following detection, a national program denominated "Programa Nacional de Luta contra o Nemátodo da Madeira do Pinheiro" (PROLUNP) was created to, among other objectives, determine the distribution of the PWN and its associated vector(s) and host(s), and therefore intensive surveys covering the entire country were conducted with thousands of wood samples and suspected insects being analyzed. This thesis presents the listing, distribution, frequency and the insects associated with Bursaphelenchus species found associated with maritime pine in Portugal, identifying and characterizing the various species by morphological, biometrical and molecular biology (ITS-RFLP and rDNA sequencing analysis) techniques. To achieve the objectives, a total of 4813 maritime pine wood samples and 3294 insects from 22 species and six families were individually analyzed. A total of nine Bursaphelenchus species were found, namely: B. antoniae, B. hellenicus, B. leoni, B. mucronatus, B. pinasteri, B. sexdentati, B. teratospicularis, B. tusciae and B. xylophilus, all of them (with the exception of B. xylophilus) being new records for Portugal. Some of the species appear to have a widespread distribution, such as B. leoni, B. teratospicularis and B. tusciae while others were very rarely found and apparently have a localized distribution range within the country, namely B. antoniae and B. mucronatus. The majority of the species is characteristic of the Mediterranean region and can also be found in countries such as Spain, Italy and Greece, reflecting the affinity of our fauna with those locations. The association of B. hellenicus and B. tusciae with maritime pine is here reported for the first time. Six of the Bursaphelenchus species were also found associated with insects, mainly from the family Scolytidae (Coleoptera). Some of these interactions were described for the first time, namely: B. hellenicus with both Ips sexdentatus and Hylurgus ligniperda, B. sexdentati with both H. ligniperda and Orthotomicus erosus and B. tusciae with H. ligniperda. The exclusive association of B. xylophilus with the cerambycid Monochamus galloprovincialis was also confirmed. The nematode's dauer juveniles were usually found in low numbers in the insect vectors (ca 10-100 per insect), although for B. xylophilus a few thousand specimens per insect were sometimes found. The location of the dauer juveniles differed according to the species, although they were more common under the elytra and wings of the adult insects. A species new to science was detected and formally described as B. antoniae, associated with Hylobius sp. (Coleoptera; Curculionidae) beetles. Morphologically, this new species is very similar to B. hylobianum, although it's distinct ITS-RFLP molecular pattern (with only the enzyme Haelll producing comparable restriction bands) and the failure of hybridization supported the two species as distinct entities. Additional phylogenetic analysis of the 18S rDNA sequence further supported the taxonomical proximity of B. antoniae with B. hylobianum. Concerning the PWN, detailed studies on the development and morphology of B. xylophilus were conducted, and comparative measurements of field-collected and laboratory-maintained populations demonstrated that nematodes from the second group displayed larger size in all morphometric parameters, which could derive from more adequate conditions of nourishment and/or temperature. Taxonomical studies on the development stages of B. xylophilus confirmed the existence of four propagative juvenile stages (J1,J2,J3 and J4), an adult stage with both sexes and two dispersal stages (jIII e jIV), with the measurements of the gonad length allowing the separation of the propagative stages. It is hoped that the acquired knowledge will be useful on future surveys of nematodes of the Bursaphelenchus genus collected from either wood material or insect vectors, and facilitate the correct distinction and identification of the various species which are now known to occur. ### Resumo - 0 género Bursaphelenchus compreende quase 100 espécies, distribuídas sobretudo nos países do hemisfério norte do globo terrestre. Embora algumas espécies já tenham sido detectadas em plantas herbáceas, os hospedeiros vegetais mais comuns deste género são as coníferas, particularmente pinheiros. 0 nemátode da madeira do pinheiro (NMP), Bursaphelenchus xylophilus, é considerado a espécie mais importante deste género uma vez que é o agente causal da doença da murchidão dos pinheiros ("pine wilt disease"). Originário dos Estados Unidos, onde não causa grande impacte, o NMP foi introduzido em alguns países da Ásia (China, Japão, Coreia e Taiwan) e mais recentemente na Europa (Portugal). Nestas regiões é responsável pela destruição de milhares de hectares de coníferas, assumindo uma elevada importância económica. Em Portugal, depois da sua detecção em 1999, associado a Pinus pinaster, foi implementado um programa nacional "Programa Nacional de Luta contra o Nemátodo da Madeira do Pinheiro" (PROLUNP) que permitiu determinar a área afectada pela praga (a sul do rio Tejo, península de Setúbal) bem como definir e implementar estratégias de controlo e prevenção da disseminação do NMP a outras zonas de Portugal. Recentemente, em Junho de 2008, foi confirmada a presença de B. xylophilus em outras regiões de Portugal levando as autoridades oficiais a definir todo o território continental como zona afectada e de restrição. As prospecções intensivas realizadas nos últimos anos incluíram a recolha e análise de milhares de amostras de madeira de pinheiro bem como de insectos associados ao pinheiro bravo conduzindo à identificação de várias espécies de Bursaphelenchus. Assim, os estudos conduzidos neste trabalho tiveram como objectivos efectuar uma caracterização morfológica, biométrica e molecular das espécies associadas a P. pinaster em Portugal bem como a sua distribuição geográfica e abundância. Os estudos biométricos foram realizados com populações extraídas directamente do meio natural. Foi ainda realizada uma pesquisa que permitiu identificar os insectos a que estão associadas essas espécies, os seus possíveis vectores. Foram analisadas no total 4813 amostras de P. pinaster e 3294 insectos (22 espécies pertencentes a seis famílias diferentes). Foram identificadas um total de nove espécies: B. antoniae n. sp., B. hellenicus, B. leoni, B. mucronatus, B. pinasteri, B. sexdentati, B. teratospicularis, B. tusciae e B. xylophilus. Foram realizados estudos morfológicos e biométricos de todas as espécies com excepção de B. mucronatus; o reduzido número de exemplares encontrados em apenas uma amostra foram utilizados para efectuar o diagnóstico molecular desta espécie (ITS-RFLP). Apesar de ter havido, sempre que possível, a confirmação molecular, na maioria dos casos a caracterização morfológica e biométrica permitiu a correcta identificação das espécies. Contudo, foi imprescindível a análise molecular em algumas amostras, nomeadamente para a identificação de B. xylophilus e B. sexdentati; dada a grande semelhança entre B. xylophilus e B. mucronatus e tendo sido encontradas algumas populações de B. xylophilus que possuíam fêmeas com cauda mucronada, foi necessária a realização da confirmação molecular. Com excepção de B. xylophilus, todas as outras espécies foram reportadas pela primeira vez em Portugal. Juntamente com B. xylophilus, B. pinasteri foi a espécie encontrada nas amostras de madeira de pinheiro com maior frequência. Algumas destas espécies como B. leoni, B. teratospicularis e B. tusciae foram reportadas em diferentes localidades do norte, centro e sul de Portugal, apresentando uma vasta distribuição geográfica; este resultado está em consonância com a forte associação destas espécies a climas mediterrânicos tal como acontece em Espanha, França, Itália e Grécia. Em oposição, espécies como B. antoniae e B. mucronatus foram encontradas apenas numa ocasião na região centro (Leiria) e norte (Figueira da Foz) do país, respectivamente. Bursaphelenchus mucronatus é igualmente pouco frequente em Espanha onde ocorre sobretudo na região norte, na Galiza. Esta espécie preferirá climas mais frios, ocorrendo com uma maior frequência nas regiões de latitude norte; esta análise é corroborada pela presença constante em países como Alemanha, Finlândia, França, Noruega, Rússia e Suécia. A nível mundial são descritas neste trabalho pela primeira vez as associações das espécies B. hellenicus e B. tusciae ao hospedeiro vegetal P. pinaster.

Analysis of adaptive responses of Pinus pinaster to changing environmental conditions in the Mediterranean region

Recent climate evolution studies highlight the progressive temperature increase and prevalence of seasonal drought, with specially incidence in the Mediterranean region. Although conifers are very important species regarding forest conservation, sustainability and productivity, given the large forest surface they cover in Spain and their active role in preventing soil erosion and desertification, we know little about the molecular mechanisms which control adaptation in this ancient taxonomic group

Can seed production and restricted dispersal limit recruitment in Pinus pinaster Aiton from the Spanish Northern Plateau?

Natural regeneration faces increasing difficulties in dry forests from the Mediterranean basin, including for normally well-regenerating species such as maritime pine (Pinus pinaster Aiton). In this paper, we studied female fertility, seed dispersal and spread rates in P. pinaster from the Spanish Northern Plateau, where natural regeneration failure is a main concern for forest managers. For this purpose we periodically collected data from seed traps and trees located at two core locations across several years. We found significant variation in interannual cone production, with the best seed trees being the same across years. In addition, we found highly skewed distributions of female reproductive effort and large fertility differences across stands located few kilometres away. Annual seed dispersal kernels fitted lognormal or 2Dt models depending on the stand analysed, with median dispersal distances between 14 and 25 m. Kernels fitted for maximum dispersal periods showed an outstanding intraseasonal variation of median dispersal distances, from 10 to 54 m, in association to variable patterns of rainfall and maximum wind speed. The amount of seed produced appeared to be enough to guarantee the natural regeneration of the stands during the typical 20-year regeneration period. Colonisation simulations concluded that Mediterranean maritime pine has a notable dispersion capacity, which is strongly influenced by levels of fecundity and, especially, by the number and frequency of long-distance dispersal events. The latter play a key role in tree dispersion processes through enlarging the occupied area and fostering the invasion of abandoned crop land.

Resin tapping in Pinus pinaster: effects on growth and response function to climate

Dendrocronología sobre Pinus pinaster, como la recolección de resina y los factores climáticos han afectado a su crecimiento.

Factores anatómicos, dendrométricos y climáticos implicados en la producción de resina de Pinus pinaster AIT. : aplicación a la mejora de los métodos de resinación

Pinus pinaster Ait. es la conífera con mayor área de distribución en la Península Ibérica y es, a día de hoy, la única especie resinada en nuestro país. La inducción del flujo de resina al exterior para su recolección a través de distintos tipos de heridas ha sido practicada desde hace miles de años por distintas culturas. En todos los casos, las técnicas desarrolladas se basan en la estimulación del característico sistema de defensa de las pináceas. En los últimos siete años se viene observando una tendencia de incremento sustancial de la superficie resinada en España, acompañada por avances tecnológicos dirigidos a la mecanización y mejora de estimulantes. El aprovechamiento resinero se perfila como un sector estratégico en la generación de empleo rural y la conservación de ecosistemas. La industria resinera demanda métodos de extracción más eficaces, una selvicultura adecuada y actualizada, y condiciones laborales de los resineros más dignas con objeto de llegar a ser competitiva en el mercado internacional. Este trabajo se centra en ampliar el conocimiento sobre el sistema de defensa de P. pinaster, concretamente sobre las estructuras y procesos que pueden afectar a la producción de resina. Se analizan las relaciones entre las características anatómicas del xilema, destacando las relacionadas con los canales resiníferos, las variables dendrométricas y dasométricas de la masa y el flujo de resina (objetivo 1). Se estudia cómo estas relaciones son moduladas por las heridas de resinación dependiendo de la técnica de resinación aplicada (objetivo 2), el clima y el balance hídrico del suelo (objetivo 3). El material vegetal, las muestras de suelo y los datos de producción de resina y climáticos usados en esta tesis han sido recogidos en tres montes de utilidad pública; MUP 101 en Armuña, MUP 108 en Melque de Cercos y MUP 117 en Nieva (en esta última solo se recogieron los datos de producciones), todos ellos pinares monoespecíficos de P. pinaster localizados en la denominada Tierra de Pinares Segoviana. En los árboles de nuestro estudio se han aplicado cuatro métodos de resinación: método de pica de corteza con estimulante y método mecanizado con estimulante, ambos en sentido ascendente y descendente. En los trabajos realizados para el análisis de la influencia de la anatomía constitutiva en la producción de resina (objetivo 1) y el efecto del clima (objetivo 3), se obtuvieron muestras del xilema de 26 árboles resinados en Melque de Cercos y Armuña y 12 árboles control sin resinar. Para caracterizar los pies estudiados, se midió la altura, diámetro normal y porcentaje de copa viva. Las muestras de tejido fueron recogidas en una zona del tronco a una distancia del límite de la herida considerada en la bibliografía como no afectada (anatomía constitutiva). Para el análisis de las alteraciones anatómicas inducidas por la herida (objetivo 2), se recogieron muestras en ocho de los individuos en los que se habían realizado los distintos métodos de resinación descritos y en cinco árboles control. Se obtuvieron ocho muestras de tejido distribuidas en la parte superior, inferior, lateral y centro de la herida de cada uno de los árboles resinados. Para establecer las diferencias en la producción de resina según el método de resinación, se analizaron las producciones de 561 árboles resinados en 2012 con estos cuatro métodos en Nieva. Los principales resultados de estos trabajos muestran que la producción de resina está ligada al volumen de canales (axiales y radiales) y a la frecuencia de canales radiales existentes en el árbol antes de efectuar ninguna herida (sistema constitutivo). De esta manera, los árboles grandes productores de resina mostraron una red de canales más densa que aquellos con producciones medias. Una vez realizada la herida de resinación, observamos una disminución del ancho del anillo de crecimiento y del tamaño medio de los canales axiales a la vez que se incrementaba la frecuencia y área ocupada por mm2 de anillo de estos canales. Estos cambios perduraron en el árbol durante al menos tres años y fueron distintos dependiendo de la localización en el entorno de la herida y del método de resinación. Las respuestas más intensas a la herida se observaron el año siguiente a la realización de la misma, en dirección axial, para las distancias más próximas al límite de la herida y para los métodos de resinación en sentido ascendente. Además, se ha constatado que como consecuencia de las heridas de resinación se produjeron cambios en la anatomía del xilema en zonas alejadas de la herida, tanto en el año de la herida como años posteriores. Es decir, se observó una respuesta sistémica del árbol. Respecto al papel del clima como regulador de la respuesta del árbol, se ha evidenciado que la temperatura, la radiación y la ETP influyeron en la producción de resina, no solo durante la campaña de resinación, sino también durante los meses anteriores. El déficit hídrico favoreció la producción y la formación de canales axiales pero, a partir de un determinado umbral, esa relación se invirtió y las lluvias estivales incrementaron la producción. Algunas de estas variables climáticas se asociaron a cambios en el tamaño y frecuencia de las estructuras secretoras, las cuales posiblemente modulan la respuesta defensiva de la planta. La dendrometría del árbol (evaluada a través del diámetro normal, altura y porcentaje de copa viva), la densidad de la masa y el tipo de suelo influyeron en el potencial de producción de resina de P. pinaster. Árboles más vigorosos, parcelas con menores densidades y suelos con más capacidad para la retención de agua y nutrientes presentaron producciones mayores. Estos trabajos se complementan en anexos con una caracterización del sistema socio-ecológico del pinar en resinación. En ese trabajo se identifican sus potenciales servicios ecosistémicos y se evalúa su grado de vinculación con el aprovechamiento resinero con objeto de valorar su funcionalidad y aproximar una valoración económica de modo que sea posible apreciar la importancia económica de los mismos. Para concluir, podemos resaltar que son necesarios más trabajos de carácter científico para avanzar en la comprensión de los procesos anatómicos y fisiológicos que regulan la secreción de resina en P. pinaster y sus interacciones con el medio. Esto permitiría avances certeros hacia el desarrollo de métodos de extracción más eficaces, una selvicultura óptima, el reconocimiento de los beneficios socio-ecológicos y económicos del aprovechamiento y, de manera general, una bibliografía amplia y fiable para la consulta y desarrollo de futuras mejoras que posibiliten la reactivación y conservación de la resinación como aprovechamiento rentable. ABSTRACT Pinus pinaster Ait. is the most widespread conifer in Spain and is now the only species tapped for its oleoresin. External induction of resin secretion, based on the defense system of Pinus trees, has been performed by humans since Classical times through various methods. The socio-economic implication of this practice in Spain justifies a new approach to improve tapping methodology and understand the effects of this activity on the tree. In the last five years, sharp increases in the price of natural resins, accompanied by technological advances directed toward mechanization, have made resin tapping a strategic activity for rural development and forest conservation. The resin industry demands more efficient tapping methods and forest management plans as a way to increase competitiveness in a global market. In this way, this work focuses on the study of the defense system of P. pinaster, with the aim to understand the effects of anatomical and physiological characteristics and environmental conditions on resin yield. The relationships between anatomical variables -with special focus on resin canals-, dendrometric and dasometric variables, and resin yield will be evaluated (objective 1). The tapping wound effects (objective 2) and the intra- and inter-annual variability of climate conditions and soil water availability influence (objective 3) on resin yield will be also studied. The plant and soil material and the resin yield and climatic data used in this thesis have been collected in stands of three public forests of P. pinaster; Armuña, Melque de Cercos and Nieva, located in Segovia (Central Spain). Trees were tapped using two different methods: mechanized or traditional tool, in both upwards and downwards direction. Twenty-six tapped trees of contrasting resin yield classes and twelve non-tapped (control) trees, growing in two locations (Armuña y Melque de Cercos) with the same climate but different stand density and soil characteristics, were selected for studying the role of tree size, xylem anatomy at distal parts aside from the tapping wound (objective 1) and climate influence (objective 3) on resin yield. Concerning the tree defenses induced by the tapping wound (objective 2), the xylem of eight trees, tapped with the two described methods in both upwards and downwards direction, were analyzed. From each tapped tree, eight cores were collected at different locations and varying distances from the tapping wound. In each core, a histological analysis was made. Growth ring width, earlywood and latewood width, and axial canal frequency, area, mean size and location were measured. The effect of the tapping method on resin yield was assessed in 561 P. pinaster tapped trees in a stand in Nieva. In tissues not affected by the tapping wound, the frequency of radial resin canals and the total volume of resin canals were related to resin yield. The frequency of radial canals and the resin yield were strongly related to tree diameter and percentage of live crown. High area of axial resin canals per mm2 was related to high yielding trees, but only in the location with higher plant density and poorer soil quality. In tapped trees, an increase in axial canal frequency and area was found during the three years following the start of tapping activity, suggesting that canal formation is a systemic induced response to wounding. The highest mean annual resin yield was found using the traditional tool in upwards direction, which also induced the highest increase in axial canal frequency and area. The lowest yield was found for mechanized tapping, which showed no differences between the upwards and downwards directions. The strongest induction of systemic induced responses in terms of resin canal frequency and area was detected one year after tapping for upwards tapping. This suggests the involvement of signaling processes that spread mainly upwards, and the importance of adaptive processes as a defense against periodic insect attacks. Intra-annual variation in resin yield was strongly correlated with temperature, solar radiation, potential evapotranspiration and soil water deficit. Inter-annual variation in resin yield and resin canal abundance were correlated with temperature and water deficit in spring, but above a certain threshold of cumulated water deficit in summer rainfall favored resin yield. Under adverse climate scenarios where resource optimization is desirable, a reduced tapping season during the warmest months (June–September) would be advisable, assuming a very small production loss relative to traditional tapping season. Similarly, in years with a rainy summer and/or dry spring, a slightly longer tapping season could be suggested, as resin yield increases after these events. Tree diameter and percentage of live crown, and radial resin canal frequency could be useful criteria for estimating resin yields in P. pinaster. Vigorous trees in lower density stands and growing up in good quality soils will be the most productive. These conclusions could be applied to improve tapping management and breeding programs. These works are complemented with socio-ecological characterization, the identification of the main ecosystem services and an assessment of the possible economic impact derived from the tapping practice. To conclude, more scientific studies are necessary for understanding the anatomical and physiological processes behind resin synthesis and their interactions with the environment. This would afford further progresses towards an extensive and reliable bibliography and improved tapping methods and optimal selvicultural guide lines.

FlorNExT®, a cloud computing application to estimate growth and yield of maritime pine (Pinus pinaster Ait.) stands in Northeastern Portugal

Aim of the study: To introduce and describe FlorNExT®, a free cloud computing application to estimate growth and yield of maritime pine (Pinus pinaster Ait.) even-aged stands in the Northeast of Portugal (NE Portugal). Area of study: NE Portugal. Material and methods: FlorNExT® implements a dynamic growth and yield modelling framework which integrates transition functions for dominant height (site index curves) and basal area, as well as output functions for tree and stand volume, biomass, and carbon content. Main results: FlorNExT® is freely available from any device with an Internet connection at: http://flornext.esa.ipb.pt/. Research highlights: This application has been designed to make it possible for any stakeholder to easily estimate standing volume, biomass, and carbon content in maritime pine stands from stand data, as well as to estimate growth and yield based on four stand variables: age, density, dominant height, and basal area. FlorNExT® allows planning thinning treatments. FlorNExT® is a fundamental tool to support forest mobilization at local and regional scales in NE Portugal. Material and methods: FlorNExT® implements a dynamic growth and yield modelling framework which integrates transition functions for dominant height (site index curves) and basal area, as well as output functions for tree and stand volume, biomass, and carbon content. Main results: FlorNExT® is freely available from any device with an Internet connection at: http://flornext.esa.ipb.pt/. Research highlights: This application has been designed to make it possible for any stakeholder to easily estimate standing volume, biomass, and carbon content in maritime pine stands from stand data, as well as to estimate growth and yield based on four stand variables: age, density, dominant height, and basal area. FlorNExT® allows planning thinning treatments. FlorNExT® is a fundamental tool to support forest mobilization at local and regional scales in NE Portugal.

First detection of Bursaphelenchus luxuriosae associated with Pinus pinaster in Portugal

During a field survey carried out on symptomatic maritime pine trees (Pinus pinaster) in Góis, central Portugal, Bursaphelenchus luxuriosae was isolated for the first time in Portugal, and in Europe. Identification of the nematodes was based on morphological characters and molecular analyses for this species. The general morphology of both females and males is in agreement with the original description for B. luxuriosae, namely the typical morphology of the male spicules and the conspicuous morphology of female tail. Species identification was confirmed through sequencing of the ITS rDNA region and the fragment spanning the D2/D3 domain of the 28S rDNA gene. This species belongs to the xylophilus-group and is the third species in this group known in Portugal. The nematodes were retrieved in small numbers (<100 nematodes/100 g dry wood), and no insect vector association could be established.

Bursaphelenchus antoniae sp. n. (Nematoda: Parasitaphelenchidae) associated with Hylobius sp. from Pinus pinaster in Portugal

Bursaphelenchus antoniae sp. n. is described and illustrated. Dauer juveniles were isolated from the body of the large pine weevil, Hylobius sp., collected from maritime pine (Pinus pinaster) stumps, in Portugal. Bursaphelenchus antoniae sp. n. was reared and maintained in P. pinaster wood segments and on Petri dish cultures of the fungi Botrytis cinerea and Monilinia fructicola. The new species is characterised by a relatively small body length of ca 583 μm (females) and 578 μm (males), a lateral field with two incisures, presence of a small vulval flap and a conoid female tail with a rounded or pointed terminus. Males have stout spicules with a disc-like cucullus and seven caudal papillae arranged as a single midventral precloacal papilla, one precloacal pair and two postcloacal pairs. In the character of the lateral field, B. antoniae sp. n. comes close to B. abietinus, B. rainulfi and B. hylobianum, whilst spicule characters place it within the piniperdae-group sensu Ryss et al. Morphologically, B. antoniae sp. n. is closest to B. hylobianum; the spicules of these two species having flattened, wing-like, alae on the distal third of the lamina. Bursaphelenchus antoniae sp. n. is distinguished from B. hylobianum on the arrangement of the caudal papillae (two vs three pairs). ITS-RFLP profiles and the failure to hybridise support the separation of the two species. Phylogenetic analysis of the new species, based on the 18S rDNA sequence, supports the inclusion of this new species in the B. hylobianum-group sensu Braasch. Sequence analysis of the 28S rDNA D2/D3 domain did not place the new species in a definite group.

Modelización de crecimiento de pinus pinaster l.

Tesis (Maestría en Ciencias Forestales) UANL, 2013.