TORP: The Open Robot Project A Framework for Module-Based Robots

The development of robots has shown itself as a very complex interdisciplinary research field. The predominant procedure for these developments in the last decades is based on the assumption that each robot is a fully personalized project, with the direct embedding of hardware and software technologies in robot parts with no level of abstraction. Although this methodology has brought countless benefits to the robotics research, on the other hand, it has imposed major drawbacks: (i) the difficulty to reuse hardware and software parts in new robots or new versions; (ii) the difficulty to compare performance of different robots parts; and (iii) the difficulty to adapt development needs-in hardware and software levels-to local groups expertise. Large advances might be reached, for example, if physical parts of a robot could be reused in a different robot constructed with other technologies by other researcher or group. This paper proposes a framework for robots, TORP (The Open Robot Project), that aims to put forward a standardization in all dimensions (electrical, mechanical and computational) of a robot shared development model. This architecture is based on the dissociation between the robot and its parts, and between the robot parts and their technologies. In this paper, the first specification for a TORP family and the first humanoid robot constructed following the TORP specification set are presented, as well as the advances proposed for their improvement.

TORP: The Open Robot Project A Framework for Module-Based Robots

The development of robots has shown itself as a very complex interdisciplinary research field. The predominant procedure for these developments in the last decades is based on the assumption that each robot is a fully personalized project, with the direct embedding of hardware and software technologies in robot parts with no level of abstraction. Although this methodology has brought countless benefits to the robotics research, on the other hand, it has imposed major drawbacks: (i) the difficulty to reuse hardware and software parts in new robots or new versions; (ii) the difficulty to compare performance of different robots parts; and (iii) the difficulty to adapt development needs-in hardware and software levels-to local groups expertise. Large advances might be reached, for example, if physical parts of a robot could be reused in a different robot constructed with other technologies by other researcher or group. This paper proposes a framework for robots, TORP (The Open Robot Project), that aims to put forward a standardization in all dimensions (electrical, mechanical and computational) of a robot shared development model. This architecture is based on the dissociation between the robot and its parts, and between the robot parts and their technologies. In this paper, the first specification for a TORP family and the first humanoid robot constructed following the TORP specification set are presented, as well as the advances proposed for their improvement.

Contribution to Asterisk Open Source Project

With this final master thesis we are going to contribute to the Asterisk open source project. Asterisk is an open source project that started with the main objective of develop an IP telephony platform, completely based on Software (so not hardware dependent) and under an open license like GPL. This project was started on 1999 by the software engineer Mark Spencer at Digium. The main motivation of that open source project was that the telecommunications sector is lack of open solutions, and most of the available solutions are based on proprietary standards, which are close and not compatible between them. Behind the Asterisk project there is a company, Digum, which is the project leading since the project was originated in its laboratories. This company has some of its employees fully dedicated to contribute to the Asterisk project, and also provide the whole infrastructure required by the open source project. But the business of Digium isn't based on licensing of products due to the open source nature of Asterisk, but it's based on offering services around Asteriskand designing and selling some hardware components to be used with Asterisk. The Asterisk project has grown up a lot since its birth, offering in its latest versions advanced functionalities for managing calls and compatibility with some hardware that previously was exclusive of proprietary solutions. Due to that, Asterisk is becoming a serious alternative to all these proprietaries solutions because it has reached a level of maturity that makes it very stable. In addition, as it is open source, it can be fully customized to a givenrequirement, which could be impossible with the proprietaries solutions. Due to the bigness that is reaching the project, every day there are more companies which develop value added software for telephony platforms, that are seriously evaluating the option of make their software fully compatible withAsterisk platforms. All these factors make Asterisk being a consolidated project but in constant evolution, trying to offer all those functionalities offered by proprietaries solutions. This final master thesis will be divided mainly in two blocks totally complementaries. In the first block we will analyze Asterisk as an open source project and Asterisk as a telephony platform (PBX). As a result of this analysis we will generate a document, written in English because it is Asterisk project's official language, which could be used by future contributors as an starting point on joining Asterisk. On the second block we will proceed with a development contribution to the Asterisk project. We will have several options in the form that we do the contribution, such as solving bugs, developing new functionalities or start an Asterisk satellite project. The type of contribution will depend on the needs of the project on that moment.

Sustaining your Open Source project through training: a Hydra case study

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

TORP: An open standard framework for humanoid robots

Humanoid robots are an extremely complex interdisciplinary research field. Particularly, the development of high size humanoid robots usually requires joint efforts and skills from groups that are in many different research centers around the world. However, there are serious constraints in this kind of collaborative development. Some efforts have been made in order to propose new software frameworks that can allow distributed development with also some degree of hardware abstraction, allowing software reuse in successive projects. However, computation represents only one of the dimensions in robotics tasks, and the need for reuse and exchange of full robot modules between groups are growing. Large advances could be reached if physical parts of a robot could be reused in a different robot constructed with other technologies by other researcher or group. This paper proposes a new robot framework, from now on called TORP (The Open Robot Project), that aims to provide a standard architecture in all dimensions (electrical, mechanical and computational) for this collaborative development. This methodology also represents an open project that is fully shared. In this paper, the first robot constructed following the TORP specification set is presented as well as the advances proposed for its improvement. © 2010 IEEE.

Linking electronic journals - Lessons from the Open Journal project

The Open Journal project has completed its three year period of funding by the UK Electronic Libraries (eLib) programme (Rusbridge 1998). During that time, the number of journals that are available electronically leapt from a few tens to a few thousand. Some of these journals are now developing the sort of features the project has been advocating, in particular the use of links within journals, between different primary journals, with secondary journals data, and to non-journal sources. Assessing the achievements of the project and considering some of the difficulties it faced, we report on the different approaches to linking that the project developed, and summarise the important user responses that indicate what works and what does not. Looking ahead, there are signs of change, not just to simple linking within journals but to schemes in which links are the basis of "distributed" journals, where information may be shared and documents built from different sources. The significance has yet to be appreciated, but this would be a major change from printed journals. If projects such as this and others have provided the initial impetus, the motivation for distributed journals comes, perhaps surprisingly, from within certain parts of the industry, as the paper shows.

Safety and accuracy of robot-assisted versus fluoroscopy-guided pedicle screw insertion for degenerative diseases of the lumbar spine: a matched cohort comparison.

Object Recent years have been marked by efforts to improve the quality and safety of pedicle screw placement in spinal instrumentation. The aim of the present study is to compare the accuracy of the SpineAssist robot system with conventional fluoroscopy-guided pedicle screw placement. Methods Ninety-five patients suffering from degenerative disease and requiring elective lumbar instrumentation were included in the study. The robot cohort (Group I; 55 patients, 244 screws) consisted of an initial open robot-assisted subgroup (Subgroup IA; 17 patients, 83 screws) and a percutaneous cohort (Subgroup IB, 38 patients, 161 screws). In these groups, pedicle screws were placed under robotic guidance and lateral fluoroscopic control. In the fluoroscopy-guided cohort (Group II; 40 patients, 163 screws) screws were inserted using anatomical landmarks and lateral fluoroscopic guidance. The primary outcome measure was accuracy of screw placement on the Gertzbein-Robbins scale (Grade A to E and R [revised]). Secondary parameters were duration of surgery, blood loss, cumulative morphine, and length of stay. Results In the robot group (Group I), a perfect trajectory (A) was observed in 204 screws (83.6%). The remaining screws were graded B (n = 19 [7.8%]), C (n = 9 [3.7%]), D (n = 4 [1.6%]), E (n = 2 [0.8%]), and R (n = 6 [2.5%]). In the fluoroscopy-guided group (Group II), a completely intrapedicular course graded A was found in 79.8% (n = 130). The remaining screws were graded B (n = 12 [7.4%]), C (n = 10 [6.1%]), D (n = 6 [3.7%]), and E (n = 5 [3.1%]). The comparison of "clinically acceptable" (that is, A and B screws) was neither different between groups (I vs II [p = 0.19]) nor subgroups (Subgroup IA vs IB [p = 0.81]; Subgroup IA vs Group II [p = 0.53]; Subgroup IB vs Group II [p = 0.20]). Blood loss was lower in the robot-assisted group than in the fluoroscopy-guided group, while duration of surgery, length of stay, and cumulative morphine dose were not statistically different. Conclusions Robot-guided pedicle screw placement is a safe and useful tool for assisting spine surgeons in degenerative spine cases. Nonetheless, technical difficulties remain and fluoroscopy backup is advocated.

Promoting good practices for handling nanomaterials : an international wiki project

As production and use of nanomaterials in commercial products grow it is imperative to ensure these materials are used safely with minimal unwanted impacts on human health or the environment. Foremost among the populations of potential concern are workers who handle nanomaterials in a variety of occupational settings, including university laboratories, industrial manufacturing plants and other institutions. Knowledge about prudent practices for handling nanomaterials is being developed by many groups around the world but may be communicated in a way that is difficult for practitioners to access or use. The GoodNanoGuide is a collaborative, open-access project aimed at creating an international forum for the development and discussion of prudent practices that can be used by researchers, workers and their representatives, occupational safety professionals, governmental officials and even the public. The GoodNanoGuide is easily accessed by anyone with access to a web browser and aims to become a living repository of good practices for the nanotechnology enterprise. Interested individuals are invited to learn more about the GoodNanoGuide at http://goodnanoguide.org.

eLab, a Personal Learning Environment for the Green Open Innovation Platform

Open Innovation is a relatively new concept which involves a change of paradigm in the R+D+i processes of companies whose aim is to create new technologies or new processes. If to this change, we add the need for innovation in the new green and sustainability economy, and we set out to create a collaborative platform with a learning space where this can happen, we will be facing an overwhelming challenge which requires the application of intelligent programming technologies and languages at the service of education.The aim of the Green IDI (Green Open Innovation) ¿ Economic development and job creation vector in SMEs, based on the environment and sustainability project is to create a platform where companies and individual researchers can perform open innovation processes in the field of sustainability and the environment.The Green IDI (Green Open Innovation) project is funded under the program INNPACTO by the Ministry of Science and Innovation of Spain and is being developed through a consortium formed by the following institutions: GRUPO ICA; COMPARTIA; GRUPO INTERCOM; CETAQUA and the Instituto de Investigación en Inteligencia Artificial (IIIA) from Consejo Superior de Investigaciones Científicas (CSIC). Also the consortium include FUNDACIÓ PRIVADA BARCELONA DIGITAL; PIMEC and UNIVERSITAT OBERTA DE CATALUNYA (UOC).Sustainability and positive action for the environment are considered the principle vector of economic development for companies. As Nicolás Scoli says (2007) ¿in short, preventing unnecessary consumption and the efficient consumption of resources means producing greater wealth with less. Both effects lead to reduced pollution linked to production and consumption¿.The Spanish Sustainable Development Strategy (EEDS) plan defends consumption and sustainable production linked to social and economic development by adhering to the commitment not to endanger ecosystems and abolishing the idea that economic growth is directly proportional to the deterioration of the environment.Uniting the Open Innovation and New Green Economy concepts leads to the "Green Open Innovation¿ Platform creation project.This article analyses the concept of open innovation and defines the importance of the new green and sustainable economy. Lastly, it proposes the creation of eLab. The eLab is defined as an Open Green Innovation Platform personal and collaborative education space which is fed by the interactions of users and which enables innovation processes based on new green economy concepts to be carried out.The creation of a personal learning environment such as eLab on the Green Open Innovation Platform meets the need to offer a collaborative space where platform users can improve their skills regarding the environment and sustainability based on collaborative synergies through Information and Communication Technologies.

Building Successful, Open Repository Software Ecosystems: Technology and Community

Panel at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

ROP Gadgets hiding techniques in Open Source Projects

Today there are many techniques that allows to exploit vulnerabilities of an application; there are also many techniques that are designed to stop these exploit attacks. This thesis wants to highlight how a specific type of attack, based on a technique called Return Oriented Programming (ROP), can be easily applied to binaries with particular characteristics. A new method that allows the injection of "useful" code in an Open Source projects without arousing suspicions is presented; this is possible because of the harmless aspects of the injected code. This useful code facilitate a ROP attack against an executable that contains vulnerable bugs. The injection process can be visualized in environment where an user can contribute with own code to a particular Open Source project. This thesis also highlights how current software protections are not correctly applied to Open Source project, thus enabling the proposed approach.

Enabling knowledge creation through outsiders: towards a push model of open innovation

Open innovation is increasingly being adopted in business and describes a situation in which firms exchange ideas and knowledge with external participants, such as customers, suppliers, partner firms, and universities. This article extends the concept of open innovation with a push model of open innovation: knowledge is voluntarily created outside a firm by individuals and organisations who proceed to push knowledge into a firm’s open innovation project. For empirical analysis, we examine source code and newsgroup data on the Eclipse Development Platform. We find that outsiders invest as much in the firm’s project as the founding firm itself. Based on the insights from Eclipse, we develop four propositions: ‘preemptive generosity’ of a firm, ‘continuous commitment’, ‘adaptive governance structure’, and ‘low entry barrier’ are contexts that enable the push model of open innovation.

Decisions, decisions everywhere (in the open data era).

Abstract: Decision support systems have been widely used for years in companies to gain insights from internal data, thus making successful decisions. Lately, thanks to the increasing availability of open data, these systems are also integrating open data to enrich decision making process with external data. On the other hand, within an open-data scenario, decision support systems can be also useful to decide which data should be opened, not only by considering technical or legal constraints, but other requirements, such as "reusing potential" of data. In this talk, we focus on both issues: (i) open data for decision making, and (ii) decision making for opening data. We will first briefly comment some research problems regarding using open data for decision making. Then, we will give an outline of a novel decision-making approach (based on how open data is being actually used in open-source projects hosted in Github) for supporting open data publication. Bio of the speaker: Jose-Norberto Mazón holds a PhD from the University of Alicante (Spain). He is head of the "Cátedra Telefónica" on Big Data and coordinator of the Computing degree at the University of Alicante. He is also member of the WaKe research group at the University of Alicante. His research work focuses on open data management, data integration and business intelligence within "big data" scenarios, and their application to the tourism domain (smart tourism destinations). He has published his research in international journals, such as Decision Support Systems, Information Sciences, Data & Knowledge Engineering or ACM Transaction on the Web. Finally, he is involved in the open data project in the University of Alicante, including its open data portal at http://datos.ua.es

Indexação e pesquisa de informação com base em ontologias interligadas

Tecnologias da Web Semântica como RDF, OWL e SPARQL sofreram nos últimos anos um forte crescimento e aceitação. Projectos como a DBPedia e Open Street Map começam a evidenciar o verdadeiro potencial da Linked Open Data. No entanto os motores de pesquisa semânticos ainda estão atrasados neste crescendo de tecnologias semânticas. As soluções disponíveis baseiam-se mais em recursos de processamento de linguagem natural. Ferramentas poderosas da Web Semântica como ontologias, motores de inferência e linguagens de pesquisa semântica não são ainda comuns. Adicionalmente a esta realidade, existem certas dificuldades na implementação de um Motor de Pesquisa Semântico. Conforme demonstrado nesta dissertação, é necessária uma arquitectura federada de forma a aproveitar todo o potencial da Linked Open Data. No entanto um sistema federado nesse ambiente apresenta problemas de performance que devem ser resolvidos através de cooperação entre fontes de dados. O standard actual de linguagem de pesquisa na Web Semântica, o SPARQL, não oferece um mecanismo para cooperação entre fontes de dados. Esta dissertação propõe uma arquitectura federada que contém mecanismos que permitem cooperação entre fontes de dados. Aborda o problema da performance propondo um índice gerido de forma centralizada assim como mapeamentos entre os modelos de dados de cada fonte de dados. A arquitectura proposta é modular, permitindo um crescimento de repositórios e funcionalidades simples e de forma descentralizada, à semelhança da Linked Open Data e da própria World Wide Web. Esta arquitectura trabalha com pesquisas por termos em linguagem natural e também com inquéritos formais em linguagem SPARQL. No entanto os repositórios considerados contêm apenas dados em formato RDF. Esta dissertação baseia-se em múltiplas ontologias partilhadas e interligadas.

Evaluation of a volunteered geographical information trust measure in the case of OpenStreetMap

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.