Tumeurs de l'appareil locomoteur: de la simple "bosse" a la prise en charge multidisciplinaire [Tumors of the musculoskeletal system: from the "lumps" to multidisciplinary care].

Management of musculoskeletal tumours usually begins with the appearance of a lump or bump, or the onset of unspecific symptoms. A poor initial work-up, a faulty biopsy or an inadequate resection may have a severe impact on the prognosis, including re-interventions, amputation, local recurrence or systemic spread of the disease. The patient with a suspicious lesion should be referred to a "sarcoma centers" where a planned and well-performed diagnostic work-up will allow a precise diagnosis in terms of histology and staging. After a multidisciplinary discussion of the case, an accurate treatment plan is established. Such an approach allows an adequate patient management, often with a positive impact on the survival and functional outcome.

Computed tomography findings of paracoccidiodomycosis in musculoskeletal system

Objective: To evaluate musculoskeletal involvement in paracoccidioidomycosis at computed tomography. Materials and Methods: Development of a retrospective study based on a review of radiologic and pathologic reports in the institution database. Patients with histopathologically confirmed musculoskeletal paracoccidioidomycosis and submitted to computed tomography were included in the present study. The imaging findings were consensually described by two radiologists. In order to avoid bias in the analysis, one patient with uncountable bone lesions was excluded from the study. Results: A total of seven patients were included in the present study. A total of 18 bone lesions were counted. The study group consisted of 7 patients. A total number of 18 bone lesions were counted. Osteoarticular lesions were the first manifestation of the disease in four patients (57.14%). Bone lesions were multiple in 42.85% of patients. Appendicular and axial skeleton were affected in 85.71% and 42.85% of cases, respectively. Bone involvement was characterized by well-demarcated osteolytic lesions. Marginal osteosclerosis was identified in 72.22% of the lesions, while lamellar periosteal reaction and soft tissue component were present in 5.55% of them. One patient showed multiple small lesions with bone sequestra. Conclusion: Paracoccidioidomycosis can be included in the differential diagnosis of either single or multiple osteolytic lesions in young patients even in the absence of a previous diagnosis of pulmonary or visceral paracoccidioidomycosis

Sweet's syndrome involoving the musculoskeletal system during treatment of promyelocytic leukemia with all-trans retinoic acid

Induction therapy of promyelocytic leukemia with all-trans retinoic acid is a standard therapy despite significant side-effects. The most important, the "retinoic acid syndrome", consists of a hyperinflammatory reaction with capillary leakage (edema, pleural, and pericardial effusion), infiltration of myeloid cells into internal organs and systemic signs of inflammation. We describe here two cases of another hyperinflammatory reaction during all-trans retinoic acid therapy, the Sweet's syndrome, consisting of infiltrates of the skin and internal organs by neutrophilic granulocytes. Fever, painful erythematous cutaneous plaques, prominent musculoskeletal involvement (myositis, fasciitis), a sterile pulmonary infiltration and intercurrent proteinuria characterized the clinical course of all-trans retinoic acid-associated Sweet's syndrome. Treatment with glucocorticoids led to resolution of the syndrome within 48 h. Three other cases of all-trans retinoic acid-associated Sweet's syndrome without involvement of internal organs, prominent on our cases, were published previously. Recognition of ATRA-associated Sweet's syndrome is of practical importance.

Prevalence of work-related musculoskeletal disorders in Brazilian hairdressers

Background There are occupational risks inherent to the activities of professional hairdressers, which are not frequently studied, and therefore not considered in the formulation of health policies for this group. Aims To verify the prevalence of work-related musculoskeletal disorders (WRMDs) in hairdressers through symptom reports, to characterize the most frequently affected anatomical parts and to identify and analyse risk factors of WRMDs in hairdressing. Methods A cross-sectional epidemiological study of 220 hairdressers from beauty parlours in Sao Paulo (Brazil) was carried out. Each hairdresser completed a self-administered questionnaire which included information on socio-demographic characteristics, working conditions and health-related musculoskeletal system complaints. Ergonomic analyses were also performed in six parlours. Results The prevalence of WRMDs was 71%. Risk factors were associated with psychosocial factors and factors related to discomfort and work fatigue such as lack of acknowledgement of work and uncomfortable posture at work [odds ratio (OR) = 3.54; 95% confidence interval (CI) 1.51-8.30], not feeling comfortable with body/neck/shoulders while working (OR = 2.78; 95% CI 1.40-5.54) and having > 15 years of professional activity (OR = 3.04; 95% CI 1.17-7.91). Conclusion Occupational risk factors associated with the development of WRMDs in hairdressers are related to biomechanical, organizational and psychosocial work factors. The high prevalence of WRMDs found highlights the importance of disseminating recommendations for prevention of symptoms with regards to the provision of suitable furniture, equipment and work tools, environmental conditions, size of workplace, work organization and psychosocial work factors.

Quand référer aux urgences un patient présentant un trauma de l'appareil locomoteur [When should a patient with musculoskeletal trauma be referred to emergency ward?].

Standardized clinical examination can obviate the need for osteoarticular radiographs for trauma. This paper summarizes a number of decision rules that allow clinical exclusion of significant fracture of the cervical spine, elbow, knee or ankle, making radiographs unnecessary. These criteria were all derived from large cohort studies (Nexus, Ottawa, CCS, etc..., and have been prospectively validated. The rigorous use of these criteria in daily practice improves treatment times and costs with no adverse effect on treatment quality.

Impaired musculoskeletal response to age and exercise in PPARβ(-/-) diabetic mice.

Fragility fractures are recognized complication of diabetes, but yet the underlying mechanisms remain poorly understood. This is particularly pronounced in type 2 diabetes in which the propensity to fall is increased but bone mass is not necessarily low. Thus, whether factors implicated in the development of insulin resistance and diabetes directly impact on the musculoskeletal system remains to be investigated. PPARβ(-/-) mice have reduced metabolic activity and are glucose intolerant. We examined changes in bone and muscle in PPARβ(-/-) mice and investigated both the mechanism behind those changes with age as well as their response to exercise. Compared with their wild type, PPARβ(-/-) mice had an accelerated and parallel decline in both muscle and bone strength with age. These changes were accompanied by increased myostatin expression, low bone formation, and increased resorption. In addition, mesenchymal cells from PPARβ(-/-) had a reduced proliferation capacity and appeared to differentiate into more of an adipogenic phenotype. Concomitantly we observed an increased expression of PPARγ, characteristic of adipocytes. The anabolic responses of muscle and bone to exercise were also diminished in PPARβ(-/-) mice. The periosteal bone formation response to direct bone compression was, however, maintained, indicating that PPARβ controls periosteal bone formation through muscle contraction and/or metabolism. Taken together, these data indicate that PPARβ deficiency leads to glucose intolerance, decreased muscle function, and reduced bone strength. On a molecular level, PPARβ appears to regulate myostatin and PPARγ expression in muscle and bone, thereby providing potential new targets to reverse bone fragility in patients with metabolic disturbances.

Musculoskeletal manifestations in polymyalgia rheumatica and temporal arteritis.

To evaluate the incidence and characteristics of musculoskeletal manifestations in polymyalgia rheumatica (PMR) and temporal arteritis (TA). METHODS The records of 163 cases of PMR or TA diagnosed over a 15 year period in one area of Spain were reviewed for the presence and type of musculoskeletal manifestations. RESULTS Of 163 patients, 90 had isolated PMR and 73 had TA. Eighteen of the 90 patients (20%) with isolated PMR developed distal peripheral arthritis either at diagnosis or during the course of the disease. When it occurred, synovitis was mild, monoarticular or pauci-articular, asymmetrical, transient, and not destructive. Other distal manifestations observed in these patients were carpal tunnel syndrome and distal extremity swelling with pitting oedema. In all cases these manifestations occurred in conjunction with active PMR. As expected, PMR was the most frequent musculoskeletal manifestation in patients with TA, occurring in 56% of cases. On the contrary, only 11% of patients with TA developed peripheral arthritis. An important finding was that peripheral arthritis in these patients appears to be linked only temporally to the presence of simultaneous PMR and is not observed in its absence. Distal extremity swelling or defined polyarthritis were not observed. CONCLUSION The spectrum of distal musculoskeletal manifestations of PMR in our series is similar to that reported in other populations. By contrast, distal musculoskeletal symptoms are uncommon in TA. The almost complete absence of distal musculoskeletal manifestations in patients with pure TA suggests different mechanisms of disease in PMR and TA, supporting the view of two separate conditions or one common disease in which host susceptibility influences the clinical expression.

Optimization of Radiation Dose and Image Quality in Musculoskeletal CT: Emphasis on Iterative Reconstruction Techniques (Part 1).

Computed tomography (CT) is a modality of choice for the study of the musculoskeletal system for various indications including the study of bone, calcifications, internal derangements of joints (with CT arthrography), as well as periprosthetic complications. However, CT remains intrinsically limited by the fact that it exposes patients to ionizing radiation. Scanning protocols need to be optimized to achieve diagnostic image quality at the lowest radiation dose possible. In this optimization process, the radiologist needs to be familiar with the parameters used to quantify radiation dose and image quality. CT imaging of the musculoskeletal system has certain specificities including the focus on high-contrast objects (i.e., in CT of bone or CT arthrography). These characteristics need to be taken into account when defining a strategy to optimize dose and when choosing the best combination of scanning parameters. In the first part of this review, we present the parameters used for the evaluation and quantification of radiation dose and image quality. In the second part, we discuss different strategies to optimize radiation dose and image quality at CT, with a focus on the musculoskeletal system and the use of novel iterative reconstruction techniques.

Optimization of Radiation Dose and Image Quality in Musculoskeletal CT: Emphasis on Iterative Reconstruction Techniques (Part 2).

Computed tomography (CT) is a modality of choice for the study of the musculoskeletal system for various indications including the study of bone, calcifications, internal derangements of joints (with CT arthrography), as well as periprosthetic complications. However, CT remains intrinsically limited by the fact that it exposes patients to ionizing radiation. Scanning protocols need to be optimized to achieve diagnostic image quality at the lowest radiation dose possible. In this optimization process, the radiologist needs to be familiar with the parameters used to quantify radiation dose and image quality. CT imaging of the musculoskeletal system has certain specificities including the focus on high-contrast objects (i.e., in CT of bone or CT arthrography). These characteristics need to be taken into account when defining a strategy to optimize dose and when choosing the best combination of scanning parameters. In the first part of this review, we present the parameters used for the evaluation and quantification of radiation dose and image quality. In the second part, we discuss different strategies to optimize radiation dose and image quality of CT, with a focus on the musculoskeletal system and the use of novel iterative reconstruction techniques.

Dental Practice and Musculoskeletal Disorders Association: A Look at the Evidence

Disorders localized to the musculoskeletal system are a common problem among dental personnel. This study has the aim of surveying epidemiological studies reporting positive associations between dental practice and musculoskeletal disorders (MSKDs). The focus was to evaluate the size of reported risk increase and the extent to what alternative causal explanations were considered. Reports with significant links (p value .05) were systematically selected from 2 electronic databases. Twenty-five studies were identified. Risk measures were reported in 8 studies, and all of them presented weak associations. The impact of at least 1 competing explanations was analyzed in 32% of studies, but adjustment was considered not adequate in half of them. The evidence on dentistry as a profession with potential risk for development of MSKDs remains questionable. Further research is needed to more carefully elucidate the risk and the impact of MSKDs in this particular occupational group.

Development of musculoskeletal models for the design and the pre-clinical validation of hip resurfacing prosthesis

Background. The surgical treatment of dysfunctional hips is a severe condition for the patient and a costly therapy for the public health. Hip resurfacing techniques seem to hold the promise of various advantages over traditional THR, with particular attention to young and active patients. Although the lesson provided in the past by many branches of engineering is that success in designing competitive products can be achieved only by predicting the possible scenario of failure, to date the understanding of the implant quality is poorly pre-clinically addressed. Thus revision is the only delayed and reliable end point for assessment. The aim of the present work was to model the musculoskeletal system so as to develop a protocol for predicting failure of hip resurfacing prosthesis. Methods. Preliminary studies validated the technique for the generation of subject specific finite element (FE) models of long bones from Computed Thomography data. The proposed protocol consisted in the numerical analysis of the prosthesis biomechanics by deterministic and statistic studies so as to assess the risk of biomechanical failure on the different operative conditions the implant might face in a population of interest during various activities of daily living. Physiological conditions were defined including the variability of the anatomy, bone densitometry, surgery uncertainties and published boundary conditions at the hip. The protocol was tested by analysing a successful design on the market and a new prototype of a resurfacing prosthesis. Results. The intrinsic accuracy of models on bone stress predictions (RMSE < 10%) was aligned to the current state of the art in this field. The accuracy of prediction on the bone-prosthesis contact mechanics was also excellent (< 0.001 mm). The sensitivity of models prediction to uncertainties on modelling parameter was found below 8.4%. The analysis of the successful design resulted in a very good agreement with published retrospective studies. The geometry optimisation of the new prototype lead to a final design with a low risk of failure. The statistical analysis confirmed the minimal risk of the optimised design over the entire population of interest. The performances of the optimised design showed a significant improvement with respect to the first prototype (+35%). Limitations. On the authors opinion the major limitation of this study is on boundary conditions. The muscular forces and the hip joint reaction were derived from the few data available in the literature, which can be considered significant but hardly representative of the entire variability of boundary conditions the implant might face over the patients population. This moved the focus of the research on modelling the musculoskeletal system; the ongoing activity is to develop subject-specific musculoskeletal models of the lower limb from medical images. Conclusions. The developed protocol was able to accurately predict known clinical outcomes when applied to a well-established device and, to support the design optimisation phase providing important information on critical characteristics of the patients when applied to a new prosthesis. The presented approach does have a relevant generality that would allow the extension of the protocol to a large set of orthopaedic scenarios with minor changes. Hence, a failure mode analysis criterion can be considered a suitable tool in developing new orthopaedic devices.

Subject-specific musculoskeletal models of the lower limbs for the prediction of skeletal loads during motion

The determination of skeletal loading conditions in vivo and their relationship to the health of bone tissues, remain an open question. Computational modeling of the musculoskeletal system is the only practicable method providing a valuable approach to muscle and joint loading analyses, although crucial shortcomings limit the translation process of computational methods into the orthopedic and neurological practice. A growing attention focused on subject-specific modeling, particularly when pathological musculoskeletal conditions need to be studied. Nevertheless, subject-specific data cannot be always collected in the research and clinical practice, and there is a lack of efficient methods and frameworks for building models and incorporating them in simulations of motion. The overall aim of the present PhD thesis was to introduce improvements to the state-of-the-art musculoskeletal modeling for the prediction of physiological muscle and joint loads during motion. A threefold goal was articulated as follows: (i) develop state-of-the art subject-specific models and analyze skeletal load predictions; (ii) analyze the sensitivity of model predictions to relevant musculotendon model parameters and kinematic uncertainties; (iii) design an efficient software framework simplifying the effort-intensive phases of subject-specific modeling pre-processing. The first goal underlined the relevance of subject-specific musculoskeletal modeling to determine physiological skeletal loads during gait, corroborating the choice of full subject-specific modeling for the analyses of pathological conditions. The second goal characterized the sensitivity of skeletal load predictions to major musculotendon parameters and kinematic uncertainties, and robust probabilistic methods were applied for methodological and clinical purposes. The last goal created an efficient software framework for subject-specific modeling and simulation, which is practical, user friendly and effort effective. Future research development aims at the implementation of more accurate models describing lower-limb joint mechanics and musculotendon paths, and the assessment of an overall scenario of the crucial model parameters affecting the skeletal load predictions through probabilistic modeling.

Diffusion-weighted imaging in musculoskeletal radiology-clinical applications and future directions

Diffusion-weighted imaging (DWI) is an established diagnostic tool with regards to the central nervous system (CNS) and research into its application in the musculoskeletal system has been growing. It has been shown that DWI has utility in differentiating vertebral compression fractures from malignant ones, assessing partial and complete tears of the anterior cruciate ligament (ACL), monitoring tumor response to therapy, and characterization of soft-tissue and bone tumors. DWI is however less useful in differentiating malignant vs. infectious processes. As of yet, no definitive qualitative or quantitative properties have been established due to reasons ranging from variability in acquisition protocols to overlapping imaging characteristics. Even with these limitations, DWI can still provide clinically useful information, increasing diagnostic accuracy and improving patient management when magnetic resonance imaging (MRI) findings are inconclusive. The purpose of this article is to summarize recent research into DWI applications in the musculoskeletal system.

Evaluation of the Musculoskeletal Diseases Program.

Mode of access: Internet.

National training course, emergency medical technician - paramedic. Instructor's lesson plans. Module IX: musculoskeletal.

Mode of access: Internet.