Special investigation report on emergency medical services operations /

"Notation 4402E."

A probabilistic analysis of Clostridium perfringens growth during food service operations

The purpose of this study was threefold: first, the study was designed to illustrate the use of data and information collected in food safety surveys in a quantitative risk assessment. In this case, the focus was on the food service industry; however, similar data from other parts of the food chain could be similarly incorporated. The second objective was to quantitatively describe and better understand the role that the food service industry plays in the safety of food. The third objective was to illustrate the additional decision-making information that is available when uncertainty and variability are incorporated into the modelling of systems. (C) 2002 Elsevier Science B.V. All rights reserved.

Mutilations Due to Medical Disorders in Children

Soft-tissue and bone necrosis, although rare in childhood, occasionally occur in the course of infectious diseases, either viral or bacterial, and seem to be the result of hypoperfusion on a background of disseminated intravascular coagulation. Treatment consists in correction of septic shock and control of necrosis. Necrosis, once started, shows extraordinarily rapid evolution, leading to soft-tissue and bone destruction and resulting in anatomic, functional, psychological, and social handicaps. Ten mutilated children were treated from January 1986 to January 1999 in Hospital de Dona Estefaˆ nia, Lisbon, Portugal. One was recovering from hemolytic-uremic syndrome with a severe combined immunodeficiency, another malnourished, anemic child had malaria, and three had chicken pox (in one case complicated by meningococcal septicemia). There were three cases of meningococcal and two of pyocyanic septicemia (one in a burned child and one in a patient with infectious mononucleosis). The lower limbs (knee,leg, foot) were involved in five cases, the face (ear, nose, lip) in four, the perineum in three, the pelvis (inguinal region, iliac crest) in two, the axilla in one, and the upper limb (radius, hand) in two. Primary prevention is based on early recognition of risk factors and timely correction. Secondary prevention consists of immediate etiologic and thrombolytic treatment to restrict the area of necrosis. Tertiary prevention relies on adequate rehabilitation with physiotherapy and secondary operations to obtain the best possible functional and esthetic result.

Medical aspects of helicopter rescue missions involving winching of a physician

Introduction: Whereas the use of helicopters as a rapid means toreach victims and to bring them to a secure place is well-recognized,very few data are available about the value of winching physicians toprovide medical care for the victims directly on-site. We sought to studythe medical aspects of alpine helicopter rescue operations involving thewinching of an emergency physician to the victim.Methods: We retrospectively reviewed the medical reports of a singlehelicopter-based emergency medical service. Data from 1 January 2003to 31 December 2008 were analyzed. Cases with emergency callindicating that the victim was deceased were excluded. Data includedthe category (trauma or illnesses), and severity (NACA score) of theinjuries, along with the main medical procedures performed on site.Results: 9879 rescue missions were conducted between 1 January2003 and 31 December 2008. The 921 (9.3%) missions involvingwinching of the emergency physician were analysed. 840 (91%)patients suffered from trauma-related injuries. The cases of the 81 (9%)people presenting with medical emergencies were, when compared tothe trauma victims, significantly more severe according to the NACAindex (p <0.001). Overall, 246 (27%) patients had a severe injury orillness, namely, a potential or overt vital threat (NACA score between4-6, table 1). A total of 478 (52%) patients required administration ofmajor analgesics: fentanyl (443 patients; 48%), ketamine (42 patients;5%) or morphine (7 patients; 1%). The mean dose of fentanyl was 188micrograms (range 25-750, SD 127). Major medical interventions wereperformed 72 times on 39 (4%) patients (table 2).Conclusions: The severity of the patients' injuries or illnesses alongwith the high proportion of medical procedures performed directlyon-site validate emergency physician winching for advanced life supportprocedures and analgesia.

Analyse de la prise en charge médicale et de l'impact économique des patients ayant présentés des coûts extrêmes dans un hôpital universitaire [Analysis of the medical management and the economic impact of patients who have represented extreme costs at a university hospital]

Les coûts de traitement de certains patients s'avèrent extrêmement élevés, et peuvent faire soupçonner une prise en charge médicale inadéquate. Comme I'évolution du remboursement des prestations hospitalières passe à des forfaits par pathologie, il est essentiel de vérifier ce point, d'essayer de déterminer si ce type de patients peut être identifié à leur admission, et de s'assurer que leur devenir soit acceptable. Pour les années 1995 et 1997. les coûts de traitement dépassant de 6 déviations standard le coût moyen de la catégorie diagnostique APDRG ont été identifiés, et les dossiers des 50 patients dont les coûts variables étaient les plus élevés ont été analysés. Le nombre total de patients dont I'hospitalisation a entraîné des coûts extrêmes a passé de 391 en 1995 à 328 patients en 1997 (-16%). En ce qui concerne les 50 patients ayant entraîné les prises en charge les plus chères de manière absolue, les longs séjours dans de multiples services sont fréquents, mais 90% des patients sont sortis de l'hôpital en vie, et près de la moitié directement à domicile. Ils présentaient une variabilité importante de diagnostics et d'interventions, mais pas d'évidence de prise en charge inadéquate. En conclusion, les patients qualifiés de cas extrêmes sur un plan économique, ne le sont pas sur un plan strictement médical, et leur devenir est bon. Face à la pression qu'exercera le passage à un mode de financement par pathologie, les hôpitaux doivent mettre au point un système de revue interne de I'adéquation des prestations fournies basées sur des caractéristiques cliniques, s'ils veulent garantir des soins de qualité. et identifier les éventuelles prestations sous-optimales qu'ils pourraient être amenés à délivrer. [Auteurs] Treatment costs for some patients are extremely high and might let think that medical care could have been inadequate. As hospital financing systems move towards reimbursement by diagnostic groups, it is essential to assess whether inadequate care is provided, to try to identify these patients upon admission, and make sure that their outcome is good. For the years 1995 and 1997, treatment costs exceeding by 6 standard deviations the average cost of their APDRG category were identified, and the charts of the 50 patients with the highest variable costs were analyzed. The total number of patients with such extreme costs diminished from 391 in 1995 to 328 in 1997 (-16%). For the 50 most expensive patients, long stays in several services were frequent, but 90% of these patients left the hospital alive, and about half directly to their home. They presented an important variation in diagnoses and operations, but no evidence for inadequate care. Thus, patients qualified as extreme from an economic perspective cannot be qualified as such from a medical perspective, and their outcome is good. To face the pressure linked with the change in financing system, hospitals must develop an internal review system for assessing the adequacy of care, based on clinical characteristics, if they want to guarantee good quality of care and identify potentially inadequate practice.

Helicopter rescue operations involving winching of an emergency physician.

OBJECTIVE: We sought to study the epidemiologic and medical aspects of alpine helicopter rescue operations involving the winching of an emergency physician to the victim. METHODS: We retrospectively reviewed the medical and operational reports of a single helicopter-based emergency medical service. Data from 1 January 2003 to 31 December 2008 were analysed. RESULTS: A total of 921 patients were identified, with a male:female ratio of 2:1. There were 56 (6%) patients aged 15 or under. The median time from emergency call to helicopter take-off was 7 min (IQR = 5-10 min). 840 (91%) patients suffered from trauma-related injuries, with falls from heights during sports activities the most frequent event. The most common injuries involved the legs (246 or 27%), head (175 or 19%), upper limbs (117 or 13%), spine (108 or 12%), and femur (66 or 7%). Only 81 (9%) victims suffered from a medical emergency, but these cases were, when compared to the trauma victims, significantly more severe according to the NACA index (p<0.001). Overall, 246 (27%) patients had a severe injury or illness, namely, a potential or overt vital threat (NACA score between 4 and 6). A total of 478 (52%) patients required administration of major analgesics: fentanyl (443 patients or 48%), ketamine (42 patients or 5%) or morphine (7 patients or 1%). The mean dose of fentanyl was 188 micrograms (range 25-750, SD 127). Major medical interventions such as administration of vasoactive drugs, intravenous perfusions of more than 1000 ml of fluids, ventilation or intubation were performed on 39 (4%) patients. CONCLUSIONS: The severity of the patients' injuries or illnesses along with the high proportion of medical procedures performed directly on-site validates emergency physician winching for advanced life support procedures and analgesia.

Social Networking Sites as a part of Medical Device Manufacturer's Marketing Communications

The purpose of the thesis is to examine how a medical device manufacturer can exploit social networking sites as a part of its everyday marketing communications. The ultimate goal is to create an ideal process of developing marketing communications in social networking sites as a medical device manufacturer with the help of theoretical knowledge and hands-on experience. Theoretical part examines the traditional process of developing marketing communications, defines social networking sites and presents marketing activities carried out on these sites as well as introduces the characteristics of healthcare technology industry. Empirical part is collected through participation in medical device manufacturer’s marketing operations and by observing effects of different factors and actions on social media marketing. In addition, completed interviews and a meeting with company’s personnel have been utilized for data collection. This part offers comprehensive information on the examined company’s current marketing operations, industry, and activities carried out on social networking sites. As a result of the thesis a comprehensive process description of integrating and using social networking sites as a part of company’s marketing communications was formed. With the help of the process description factors and actions which have an effect on marketing operations in social networking sites are presented and methods for further developing these activities are introduced.

Development of hybrid UV VCSEL with organic active material and dielectric DBR mirrors for medical, sensoric and data storage applications

Lasers play an important role for medical, sensoric and data storage devices. This thesis is focused on design, technology development, fabrication and characterization of hybrid ultraviolet Vertical-Cavity Surface-Emitting Lasers (UV VCSEL) with organic laser-active material and inorganic distributed Bragg reflectors (DBR). Multilayer structures with different layer thicknesses, refractive indices and absorption coefficients of the inorganic materials were studied using theoretical model calculations. During the simulations the structure parameters such as materials and thicknesses have been varied. This procedure was repeated several times during the design optimization process including also the feedback from technology and characterization. Two types of VCSEL devices were investigated. The first is an index coupled structure consisting of bottom and top DBR dielectric mirrors. In the space in between them is the cavity, which includes active region and defines the spectral gain profile. In this configuration the maximum electrical field is concentrated in the cavity and can destroy the chemical structure of the active material. The second type of laser is a so called complex coupled VCSEL. In this structure the active material is placed not only in the cavity but also in parts of the DBR structure. The simulations show that such a distribution of the active material reduces the required pumping power for reaching lasing threshold. High efficiency is achieved by substituting the dielectric material with high refractive index for the periods closer to the cavity. The inorganic materials for the DBR mirrors have been deposited by Plasma- Enhanced Chemical Vapor Deposition (PECVD) and Dual Ion Beam Sputtering (DIBS) machines. Extended optimizations of the technological processes have been performed. All the processes are carried out in a clean room Class 1 and Class 10000. The optical properties and the thicknesses of the layers are measured in-situ by spectroscopic ellipsometry and spectroscopic reflectometry. The surface roughness is analyzed by atomic force microscopy (AFM) and images of the devices are taken with scanning electron microscope (SEM). The silicon dioxide (SiO2) and silicon nitride (Si3N4) layers deposited by the PECVD machine show defects of the material structure and have higher absorption in the ultra violet range compared to ion beam deposition (IBD). This results in low reflectivity of the DBR mirrors and also reduces the optical properties of the VCSEL devices. However PECVD has the advantage that the stress in the layers can be tuned and compensated, in contrast to IBD at the moment. A sputtering machine Ionsys 1000 produced by Roth&Rau company, is used for the deposition of silicon dioxide (SiO2), silicon nitride (Si3N4), aluminum oxide (Al2O3) and zirconium dioxide (ZrO2). The chamber is equipped with main (sputter) and assisted ion sources. The dielectric materials were optimized by introducing additional oxygen and nitrogen into the chamber. DBR mirrors with different material combinations were deposited. The measured optical properties of the fabricated multilayer structures show an excellent agreement with the results of theoretical model calculations. The layers deposited by puttering show high compressive stress. As an active region a novel organic material with spiro-linked molecules is used. Two different materials have been evaporated by utilizing a dye evaporation machine in the clean room of the department Makromolekulare Chemie und Molekulare Materialien (mmCmm). The Spiro-Octopus-1 organic material has a maximum emission at the wavelength λemission = 395 nm and the Spiro-Pphenal has a maximum emission at the wavelength λemission = 418 nm. Both of them have high refractive index and can be combined with low refractive index materials like silicon dioxide (SiO2). The sputtering method shows excellent optical quality of the deposited materials and high reflection of the multilayer structures. The bottom DBR mirrors for all VCSEL devices were deposited by the DIBS machine, whereas the top DBR mirror deposited either by PECVD or by combination of PECVD and DIBS. The fabricated VCSEL structures were optically pumped by nitrogen laser at wavelength λpumping = 337 nm. The emission was measured by spectrometer. A radiation of the VCSEL structure at wavelength 392 nm and 420 nm is observed.

Characterization of Novel Fabry Pérot Filter Arrays for Nanospectrometers in Medical Applications

Optische Spektroskopie ist eine sehr wichtige Messtechnik mit einem hohen Potential für zahlreiche Anwendungen in der Industrie und Wissenschaft. Kostengünstige und miniaturisierte Spektrometer z.B. werden besonders für moderne Sensorsysteme “smart personal environments” benötigt, die vor allem in der Energietechnik, Messtechnik, Sicherheitstechnik (safety and security), IT und Medizintechnik verwendet werden. Unter allen miniaturisierten Spektrometern ist eines der attraktivsten Miniaturisierungsverfahren das Fabry Pérot Filter. Bei diesem Verfahren kann die Kombination von einem Fabry Pérot (FP) Filterarray und einem Detektorarray als Mikrospektrometer funktionieren. Jeder Detektor entspricht einem einzelnen Filter, um ein sehr schmales Band von Wellenlängen, die durch das Filter durchgelassen werden, zu detektieren. Ein Array von FP-Filter wird eingesetzt, bei dem jeder Filter eine unterschiedliche spektrale Filterlinie auswählt. Die spektrale Position jedes Bandes der Wellenlänge wird durch die einzelnen Kavitätshöhe des Filters definiert. Die Arrays wurden mit Filtergrößen, die nur durch die Array-Dimension der einzelnen Detektoren begrenzt werden, entwickelt. Allerdings erfordern die bestehenden Fabry Pérot Filter-Mikrospektrometer komplizierte Fertigungsschritte für die Strukturierung der 3D-Filter-Kavitäten mit unterschiedlichen Höhen, die nicht kosteneffizient für eine industrielle Fertigung sind. Um die Kosten bei Aufrechterhaltung der herausragenden Vorteile der FP-Filter-Struktur zu reduzieren, wird eine neue Methode zur Herstellung der miniaturisierten FP-Filtern mittels NanoImprint Technologie entwickelt und präsentiert. In diesem Fall werden die mehreren Kavitäten-Herstellungsschritte durch einen einzigen Schritt ersetzt, die hohe vertikale Auflösung der 3D NanoImprint Technologie verwendet. Seit dem die NanoImprint Technologie verwendet wird, wird das auf FP Filters basierende miniaturisierte Spectrometer nanospectrometer genannt. Ein statischer Nano-Spektrometer besteht aus einem statischen FP-Filterarray auf einem Detektorarray (siehe Abb. 1). Jeder FP-Filter im Array besteht aus dem unteren Distributed Bragg Reflector (DBR), einer Resonanz-Kavität und einen oberen DBR. Der obere und untere DBR sind identisch und bestehen aus periodisch abwechselnden dünnen dielektrischen Schichten von Materialien mit hohem und niedrigem Brechungsindex. Die optischen Schichten jeder dielektrischen Dünnfilmschicht, die in dem DBR enthalten sind, entsprechen einen Viertel der Design-Wellenlänge. Jeder FP-Filter wird einer definierten Fläche des Detektorarrays zugeordnet. Dieser Bereich kann aus einzelnen Detektorelementen oder deren Gruppen enthalten. Daher werden die Seitenkanal-Geometrien der Kavität aufgebaut, die dem Detektor entsprechen. Die seitlichen und vertikalen Dimensionen der Kavität werden genau durch 3D NanoImprint Technologie aufgebaut. Die Kavitäten haben Unterschiede von wenigem Nanometer in der vertikalen Richtung. Die Präzision der Kavität in der vertikalen Richtung ist ein wichtiger Faktor, der die Genauigkeit der spektralen Position und Durchlässigkeit des Filters Transmissionslinie beeinflusst.

Annual Report Clinical Operations 2004/2005

The clinical arm of the UConn Health Center consists of the UConn Medical (UMG), our physician faculty practice, the John Dempsey Hospital (JDH) and the Correctional Managed Health Care Program (CMHC). This 2005 Clinical Annual Report was issued Sept.1, 2005 by Steven L. Strongwater, MD, Director of Clinical Operations.

Residents' risk perception due to operations of a copper smelter located near residential communities in El Paso, Texas

A face to face survey addressing environmental risk perception was conducted in January through March 2010. The 35 question survey was administered to a random sample of 73 households in El Paso, Texas. The instrument, administered in two adjacent residential communities neighboring an inactive copper smelter solicited responses about manmade and naturally occurring health risks and sources of health information that might utilized by respondents. The objective of the study was to determine if intervention which occurred in one of the communities increased residents' perception of risk to themselves and their families. The study was undertaken subsequent to increased attention from news media and public debate surrounding the request to reopen the smelter's operations. Results of the study indicated that the perception of environmental related health concerns were not significantly correlated with residence in a community receiving outreach and intervention. Both communities identified sun exposure as their greatest perceived environmental risk followed by cigarette smoking. Though industrial by products and chemical pollution were high ranking concerns, respondents indicated they felt that the decision not to reopen the smelter reduced risk in these areas. Residents expressed confidence in information received from the local health district though most indicated they received very little information from that source indicating an opportunity for public health education in this community as a strategy to address future health concerns.^

Performance tiers: Implementing comparative effectiveness analysis in the health care setting through operations research and spatial methods

This dissertation develops and tests a comparative effectiveness methodology utilizing a novel approach to the application of Data Envelopment Analysis (DEA) in health studies. The concept of performance tiers (PerT) is introduced as terminology to express a relative risk class for individuals within a peer group and the PerT calculation is implemented with operations research (DEA) and spatial algorithms. The analysis results in the discrimination of the individual data observations into a relative risk classification by the DEA-PerT methodology. The performance of two distance measures, kNN (k-nearest neighbor) and Mahalanobis, was subsequently tested to classify new entrants into the appropriate tier. The methods were applied to subject data for the 14 year old cohort in the Project HeartBeat! study.^ The concepts presented herein represent a paradigm shift in the potential for public health applications to identify and respond to individual health status. The resultant classification scheme provides descriptive, and potentially prescriptive, guidance to assess and implement treatments and strategies to improve the delivery and performance of health systems. ^