Drivers and sources of supply flexibility: An exploratory study

Purpose - There has been much research on manufacturing flexibility, but supply chain flexibility is still an under-investigated area. This paper focuses on supply flexibility, the aspects of flexibility related to the upstream supply chain. Our purpose is to investigate why and how firms increase supply flexibility.Methodology/Approach An exploratory multiple case study was conducted. We analyzed seven Spanish manufacturers from different sectors (automotive, apparel, electronics and electrical equipment).Findings - The results show that there are some major reasons why firms need supply flexibility (manufacturing schedule fluctuations, JIT purchasing, manufacturing slack capacity, low level of parts commonality, demand volatility, demand seasonality and forecast accuracy), and that companies increase this type of flexibility by implementing two main strategies: to increase suppliers responsiveness capability and flexible sourcing . The results also suggest that the supply flexibility strategy selected depends on two factors: the supplier searching and switching costs and the type of uncertainty (mix, volume or delivery).Research limitations - This paper has some limitations common to all case studies, such as the subjectivity of the analysis, and the questionable generalizability of results (since the sample of firms is not statistically significant).Implications - Our study contributes to the existing literature by empirically investigating which are the main reasons for companies needing to increase supply flexibility, how they increase this flexibility, and suggesting some factors that could influence the selection of a particular supply flexibility strategy.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Desarrollo de un estado de la cuestión acerca de las interacciones entre el control de gestión y el aprendizaje organizacional.

Las organizaciones en la actualidad deben encontrar diferentes maneras de sobrevivir en un tiempo de rápida transformación. Uno de los mecanismos usados por las empresas para adaptarse a los cambios organizacionales son los sistemas de control de gestión, que a su vez permiten a las organizaciones hacer un seguimiento a sus procesos, para que la adaptabilidad sea efectiva. Otra variable importante para la adaptación es el aprendizaje organizacional siendo el proceso mediante el cual las organizaciones se adaptan a los cambios del entorno, tanto interno como externo de la compañía. Dado lo anterior, este proyecto se basa en la extracción de documentación soporte valido, que permita explorar las interacciones entre estos dos campos, los sistemas de control de gestión y el aprendizaje organizacional, además, analizar el impacto de estas interacciones en la perdurabilidad organizacional. ​

Relación entre el desarrollo de sistemas de control de gestión y los recursos y capacidades caso : Teleperformance Colombia

Siguiendo un marco teórico integrado por varios autores entorno a los sistemas de control de gestión a lo largo de varias décadas, este trabajo pretende estudiar y contrastar la relación entre el desarrollo de dichos sistemas y los recursos y capacidades. Para tal fin, se desarrolló un estudio de caso en Teleperformance Colombia (TC), una empresa dedicada a prestación de servicio de tercerización de procesos o business process outsourcing. En el estudio se establecieron dos variables para evaluar el desarrollo de sistema de control de gestión: el diseño y el uso. A su vez, para cada uno de ellos, se definieron los indicadores y preguntas que permitieran realizar la observación y posterior análisis. De igual manera, se seleccionaron los recursos y capacidades más importantes para el desarrollo del negocio: innovación, aprendizaje organizacional y capital humano. Sobre estos se validó la existencia de relación con el SCG implementado en TC. La información obtenida fue analizada y contrastada a través de pruebas estadísticas ampliamente utilizadas en este tipo de estudios en las ciencias sociales. Finalmente, se analizaron seis posibles relaciones de las cuales, solamente se ratificó el relacionamiento positivo entre uso de sistema de control gestión y el recurso y capacidad capital humano. El resto de relacionamientos, refutaron los planteamientos teóricos que establecían cierta influencia de los sistemas de control de gestión sobre recursos y capacidades de innovación y aprendizaje organizacional.

A Cost Model for the Effect of Setup Time Reduction in Stainless Steel Strip Production

Setup time reduction facilitate the flexibility needed for just-in-time production. An integrated steel mill with meltshop, continuous caster and hot rolling mill is often operated as decoupled processes. Setup time reduction provides the flexibility needed to reduce buffering, shorten lead times and create an integrated process flow. The interdependency of setup times, process flexibility and integration were analysed through system dynamics simulation. The results showed significant reductions of energy consumption and tied capital. It was concluded that setup time reduction in the hot strip mill can aid process integration and hence improve production economy while reducing environmental impact.

Seleção de flexibilidades de manufatura: uma analogia à carteira de ações para minimização de riscos e problemas no ambiente fabril

Para empresas de manufatura, vários autores recomendam a utilização da flexibilidade de manufatura para a minimização dos impactos prejudiciais que os riscos incutem às organizações. Entretanto, a característica multidimensional da flexibilidade de manufatura e os trade-offs existentes entre os diversos tipos dificultam a tarefa de se selecionar e adequar o grau de flexibilidade a ser adotado, frente às variáveis existentes. Além disso, a escolha indevida de tipos de flexibilidade para a solução de problemas pode gerar investimentos desnecessários e inadequados, ocasionando perda de capital e ineficiência no uso dos recursos flexíveis escolhidos para antecipação aos riscos. Assim, disponibilizar à gestão de operações resultados que permitam a seleção de diferentes tipos de flexibilidade, segundo as necessidades e a disponibilidade de recursos de cada empresa, torna-se crucial. Com esse propósito, efetuou-se uma pesquisa empírica que contemplou oito empresas de cinco segmentos industriais, na qual, por meio de uma analogia à diversificação de riscos em carteira de ações, propõe-se a composição de cinco diferentes tipos de carteiras de flexibilidades, para cinco diferentes segmentos industriais.

Tomada de decisão em flexibilidade de manufatura para gerenciamento de riscos operacionais no processo produtivo industrial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

East Asia's Economic Development cum Trade "Divergence"

This paper addresses some salient features of how some of "successful" East Asian economies have been faring in terms of enhancing their export competitiveness. That export becomes more divergent in terms of its unit price as more technology-enhancing economic activity is undertaken within an economy, is the primary message that this study conveys. This is indeed what Schumpeter had addressed in conjunction with his "creative destruction" thesis. From this perspective, East Asia's export-led industrialization has been attained through a particular policy focus upon high "trade divergence" sectors underpinned by a generally high level of manufacturing flexibility. The experience of Malaysia's development serves as the strong case in point. As an East Asia-wide FTA is expected to facilitate "divergent" export-led industrialization through enhanced knowledge interaction, this dynamic or "divergent" impact that knowledge creation could exert should come to the fore of relevant policy arguments, together with static consideration of trade creation and diversion. A formal statistical test of the "divergence hypothesis" above is called for with a view to building upon this preliminary study.

An agent based architecture to support monitoring in plug and produce manufacturing systems using knowledge extraction

In recent years a set of production paradigms were proposed in order to capacitate manufacturers to meet the new market requirements, such as the shift in demand for highly customized products resulting in a shorter product life cycle, rather than the traditional mass production standardized consumables. These new paradigms advocate solutions capable of facing these requirements, empowering manufacturing systems with a high capacity to adapt along with elevated flexibility and robustness in order to deal with disturbances, like unexpected orders or malfunctions. Evolvable Production Systems propose a solution based on the usage of modularity and self-organization with a fine granularity level, supporting pluggability and in this way allowing companies to add and/or remove components during execution without any extra re-programming effort. However, current monitoring software was not designed to fully support these characteristics, being commonly based on centralized SCADA systems, incapable of re-adapting during execution to the unexpected plugging/unplugging of devices nor changes in the entire system’s topology. Considering these aspects, the work developed for this thesis encompasses a fully distributed agent-based architecture, capable of performing knowledge extraction at different levels of abstraction without sacrificing the capacity to add and/or remove monitoring entities, responsible for data extraction and analysis, during runtime.

Energy and raw material consumption analysis of powder bed fusion: case study: CNC machining and laser additive manufacturing

Laser additive manufacturing (LAM), known also as 3D printing, is a powder bed fusion (PBF) type of additive manufacturing (AM) technology used to manufacture metal parts layer by layer by assist of laser beam. The development of the technology from building just prototype parts to functional parts is due to design flexibility. And also possibility to manufacture tailored and optimised components in terms of performance and strength to weight ratio of final parts. The study of energy and raw material consumption in LAM is essential as it might facilitate the adoption and usage of the technique in manufacturing industries. The objective this thesis was find the impact of LAM on environmental and economic aspects and to conduct life cycle inventory of CNC machining and LAM in terms of energy and raw material consumption at production phases. Literature overview in this thesis include sustainability issues in manufacturing industries with focus on environmental and economic aspects. Also life cycle assessment and its applicability in manufacturing industry were studied. UPLCI-CO2PE! Initiative was identified as mostly applied exiting methodology to conduct LCI analysis in discrete manufacturing process like LAM. Many of the reviewed literature had focused to PBF of polymeric material and only few had considered metallic materials. The studies that had included metallic materials had only measured input and output energy or materials of the process and compared to different AM systems without comparing to any competitive process. Neither did any include effect of process variation when building metallic parts with LAM. Experimental testing were carried out to make dissimilar samples with CNC machining and LAM in this thesis. Test samples were designed to include part complexity and weight reductions. PUMA 2500Y lathe machine was used in the CNC machining whereas a modified research machine representing EOSINT M-series was used for the LAM. The raw material used for making the test pieces were stainless steel 316L bar (CNC machined parts) and stainless steel 316L powder (LAM built parts). An analysis of power, time, and the energy consumed in each of the manufacturing processes on production phase showed that LAM utilises more energy than CNC machining. The high energy consumption was as result of duration of production. Energy consumption profiles in CNC machining showed fluctuations with high and low power ranges. LAM energy usage within specific mode (standby, heating, process, sawing) remained relatively constant through the production. CNC machining was limited in terms of manufacturing freedom as it was not possible to manufacture all the designed sample by machining. And the one which was possible was aided with large amount of material removed as waste. Planning phase in LAM was shorter than in CNC machining as the latter required many preparation steps. Specific energy consumption (SEC) were estimated in LAM based on the practical results and assumed platform utilisation. The estimated platform utilisation showed SEC could reduce when more parts were placed in one build than it was in with the empirical results in this thesis (six parts).

Cloud computing contribution to manufacturing industry

Manufacturing industry has been always facing challenge to improve the production efficiency, product quality, innovation ability and struggling to adopt cost-effective manufacturing system. In recent years cloud computing is emerging as one of the major enablers for the manufacturing industry. Combining the emerged cloud computing and other advanced manufacturing technologies such as Internet of Things, service-oriented architecture (SOA), networked manufacturing (NM) and manufacturing grid (MGrid), with existing manufacturing models and enterprise information technologies, a new paradigm called cloud manufacturing is proposed by the recent literature. This study presents concepts and ideas of cloud computing and cloud manufacturing. The concept, architecture, core enabling technologies, and typical characteristics of cloud manufacturing are discussed, as well as the difference and relationship between cloud computing and cloud manufacturing. The research is based on mixed qualitative and quantitative methods, and a case study. The case is a prototype of cloud manufacturing solution, which is software platform cooperated by ATR Soft Oy and SW Company China office. This study tries to understand the practical impacts and challenges that are derived from cloud manufacturing. The main conclusion of this study is that cloud manufacturing is an approach to achieve the transformation from traditional production-oriented manufacturing to next generation service-oriented manufacturing. Many manufacturing enterprises are already using a form of cloud computing in their existing network infrastructure to increase flexibility of its supply chain, reduce resources consumption, the study finds out the shift from cloud computing to cloud manufacturing is feasible. Meanwhile, the study points out the related theory, methodology and application of cloud manufacturing system are far from maturity, it is still an open field where many new technologies need to be studied.

Women, other "fresh” workers, and the new manufacturing workforce of interwar Britain

Structural, organizational, and technological changes in British industry during the interwar years led to a decline in skilled and physically demanding work, while there was a dramatic expansion in unskilled and semiskilled employment. Previous authors have noted that the new un/semiskilled jobs were generally filled by “fresh” workers recruited from outside the core manufacturing workforce, though there is considerable disagreement regarding the composition of this new workforce. This paper examines labour recruitment patterns and strategies using national data and case studies of eight rapidly expanding industrial centres. The new industrial workforce is shown to have been recruited from a “reserve army” of workers with the common features of relative cheapness, flexibility, and weak unionization. These included women, juveniles, local workers in poorly paid nonindustrial sectors, such as agriculture, and (where these other categories were in short supply) relatively young long-distance internal migrants from declining industrial areas.

Contribuições da implantação da tecnologia de informação MES - Manufacturing Execution System - para a melhoria das dimensões competitivas da manufatura: estudo de caso Novelis Brasil Ltda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Industrialization Policies of Korea and Taiwan and Their Effects on Manufacturing Productivity

In this paper the total factor productivity (TFP) of the manufacturing sectors in Taiwan and the Republic of Korean was measured and compared using the growth accounting method. Through descriptive analysis, inefficiency in the Korean manufacturing sectors was revealed, especially for the period prior to 1986. Also for the period posterior to 1986, it was found that TFP tended to contribute more to the value-added growth in both countries. An econometric analysis with industrialization-related variables revealed a contrast in the structure of TFP growth between the two countries. Import penetration, capital intensity, and growth of real output were estimated to exert a positive productivity impact in Taiwan, reflecting Taiwan's flexibility and superiority in factor utilization compared with Korea. It was estimated that the export ratio did not have any major productivity impact in both countries, in contrast with the results reported by the World Bank (The East Asian Miracle: Economic Growth and Public Policy, New York: Oxford University Press, 1993).

Making Space: Feasibility of Urban Manufacturing through Shared Resources

Thesis (Master's)--University of Washington, 2016-06