978 resultados para Forest Hills
Resumo:
Mode of access: Internet.
Resumo:
This layer is a georeferenced raster image of the historic, topographic paper map entitled: Pennsylvania, Pittsburgh quadrangle, Department of the Interior; U.S. Geological Survey; State of Pennsylvania represented by the Department of Internal Affairs Topographic and Geological Survey; H. W. Wilson geographer; Frank Sutton and Robt. D. Commin, in charge of section; topography by E.B. Clark, J.H. Wheat, A.C. Roberts and E.G. Hamilton; assistants J.S.B. Daingerfield and B.B. Alexander; and various town, city, and park surveys; control by D.H. Baldwin, W.R. Harper and R.W. Berry; river shoreline by U.S. Army Engineers. It was published by the U.S. Geoloogical Survey. Ed. of 1907, reprinted in 1928. Surveyed in 1903-1904. Scale 1:62,500. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Pennsylvania South State Plane NAD 1927 coordinate projection (in Feet) (Fipszone 3702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This is a typical topographic map portraying both natural and manmade features. It shows and names works of nature, such as mountains, valleys, lakes, rivers, vegetation, etc. It also identify the principal works of humans, such as roads, railroads, boundaries, transmission lines, major buildings, etc. Relief is shown by spot heighs and with standard contour intervals of 20 feet. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.
Resumo:
This layer is a georeferenced raster image of the historic, topographic paper map entitled: Pittsburgh and vicinity, Pennsylvania, mapped, edited, and published by the Geological Survey. It was published by The Survey in 1962. Scale 1:24,000. Compiled from 1:24,000-scale maps of New Kensington West, Glenshaw, Emsworth, Ambridge, Oakdale, Pittsburgh West, Pittsburgh East, Braddock McKeesport, Glassport, Bridgeville, and Canonsburg 1960 7.5 minute quadrangles. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Pennsylvania South State Plane NAD 1927 coordinate projection (in Feet) (Fipszone 3702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This is a typical topographic map portraying both natural and manmade features. It shows and names works of nature, such as mountains, valleys, lakes, rivers, vegetation, etc. It also identify the principal works of humans, such as roads, railroads, boundaries, transmission lines, major buildings, etc. Relief is shown with spot heights and standard contour intervals of 20 feet. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.
Resumo:
This layer is a georeferenced raster image of the historic, topographic paper map entitled: Topography of Jefferson County, Kentucky : from U.S. Geological Survey topographic atlas sheets surveyed in 1904-1910, U.S. Geological Survey ; in cooperation with Kentucky Geological Survey, C. J. Norwood, director. It was published by U.S. Geological Survey in 1912. Scale 1:62,500. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Kentucky North State Plane NAD 1983 coordinate system (in Feet) (Fipszone 1601). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This is a typical topographic map portraying both natural and manmade features. It shows and names works of nature, such as mountains, valleys, lakes, rivers, vegetation, etc. It also identify the principal works of humans, such as roads, railroads, boundaries, transmission lines, major buildings, etc. Relief is shown with standard contour intervals of 20 feet and spot heights. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.
Resumo:
Mode of access: Internet.
Resumo:
Mode of access: Internet.
Resumo:
It has been well documented, within the field of landscape ecology, that terrestrial fragmentation contributes to increased heterogeneity at the landscape level. It has also been observed that elevated areas of edge habitat occur within fragmented landscapes. Spatial and temporal edge effects were investigated in four areas designated as Nature Reserve Zones within Short Hills Provincial Park, near St. Catharines, Ontario. Random sampling along exposed edges was performed on trees and saplings, at 5 and 25 ill edge depths, using the point-centred quarter method. Diameter at breast height (dbh) and distance from point measurements were used to establish relative density, dominance, frequency and importance value. One-way analyses of variance were used on dbh measurements of tree species and Chi-Square contingency tables were used on size class distributions of saplings species to determine significant differences between 5 and 25 metres. Qualitative comparisons of importance values were also used to determine differences between 5 and 25 metres as well as between trees and saplings. These statistical and qualitative comparisons suggest that a significant overall spatial edge effect is currently exhibited by fragmented wooded islands within the park. The major species of the park, Acersaccharuln, may be exhibiting a temporal edge effect. The heterogeneous nature of the park may be of importance in understanding this area as a complex, ecological system. It is possible that the remaining forest tracts of the park have been affected, and continue to be affected by previous disturbances. Based on these findings, recommendations are made to the Ontario Ministry of Natural Resources concerning the management of Short Hills Provincial Park in accordance with their 1990 proposed Management Plan.
Resumo:
Mode of access: Internet.
Resumo:
"A-89-1-90."
Resumo:
Not distributed to depository libraries.
Resumo:
Most of the applications of airborne laser scanner data to forestry require that the point cloud be normalized, i.e., each point represents height from the ground instead of elevation. To normalize the point cloud, a digital terrain model (DTM), which is derived from the ground returns in the point cloud, is employed. Unfortunately, extracting accurate DTMs from airborne laser scanner data is a challenging task, especially in tropical forests where the canopy is normally very thick (partially closed), leading to a situation in which only a limited number of laser pulses reach the ground. Therefore, robust algorithms for extracting accurate DTMs in low-ground-point-densitysituations are needed in order to realize the full potential of airborne laser scanner data to forestry. The objective of this thesis is to develop algorithms for processing airborne laser scanner data in order to: (1) extract DTMs in demanding forest conditions (complex terrain and low number of ground points) for applications in forestry; (2) estimate canopy base height (CBH) for forest fire behavior modeling; and (3) assess the robustness of LiDAR-based high-resolution biomass estimation models against different field plot designs. Here, the aim is to find out if field plot data gathered by professional foresters can be combined with field plot data gathered by professionally trained community foresters and used in LiDAR-based high-resolution biomass estimation modeling without affecting prediction performance. The question of interest in this case is whether or not the local forest communities can achieve the level technical proficiency required for accurate forest monitoring. The algorithms for extracting DTMs from LiDAR point clouds presented in this thesis address the challenges of extracting DTMs in low-ground-point situations and in complex terrain while the algorithm for CBH estimation addresses the challenge of variations in the distribution of points in the LiDAR point cloud caused by things like variations in tree species and season of data acquisition. These algorithms are adaptive (with respect to point cloud characteristics) and exhibit a high degree of tolerance to variations in the density and distribution of points in the LiDAR point cloud. Results of comparison with existing DTM extraction algorithms showed that DTM extraction algorithms proposed in this thesis performed better with respect to accuracy of estimating tree heights from airborne laser scanner data. On the other hand, the proposed DTM extraction algorithms, being mostly based on trend surface interpolation, can not retain small artifacts in the terrain (e.g., bumps, small hills and depressions). Therefore, the DTMs generated by these algorithms are only suitable for forestry applications where the primary objective is to estimate tree heights from normalized airborne laser scanner data. On the other hand, the algorithm for estimating CBH proposed in this thesis is based on the idea of moving voxel in which gaps (openings in the canopy) which act as fuel breaks are located and their height is estimated. Test results showed a slight improvement in CBH estimation accuracy over existing CBH estimation methods which are based on height percentiles in the airborne laser scanner data. However, being based on the idea of moving voxel, this algorithm has one main advantage over existing CBH estimation methods in the context of forest fire modeling: it has great potential in providing information about vertical fuel continuity. This information can be used to create vertical fuel continuity maps which can provide more realistic information on the risk of crown fires compared to CBH.
Resumo:
Sustaining soil fertility is essential to the prosperity of many households in the mid-hills of Nepal, but there are concerns that the breakdown of the traditional linkages between forest, livestock, and cropping systems is adversely affecting fertility. This study used triangulated data from surveys of households, discussion groups, and key informants in 16 wards in eastern and western Nepal to determine the existing practices for soil fertility management, the extent of such practices, and the perception of the direction of changes in soil fertility. The two principal practices for maintaining soil fertility were the application of farmyard manure (FYM) and of chemical fertilizer (mainly urea and diammonium phosphate). Green manuring, in-situ manuring, slicing terrace risers, and burning plant residues are rarely practiced. FYM usage was variable with more generally applied to khet land (average 6053 kg fresh weight manure ha(-1)) than to bari land (average 4185 kg fresh weight manure ha-1) with manure from goats and poultry preferred above that from cows and buffaloes. Almost all households (98%) apply urea to khet land and 87% to bari land, with 45% applying diammonium phosphate to both types of land. Application rates and timings of applications varied considerably both within and between wards suggesting poor knowledge transfer between the research and farming communities. The benefits of chemical fertilizers in terms of ease of application and transportation in comparison with FYM, were perceived to outweigh the widely reported detrimental hardening of soil associated with their continued usage. Among key informants, FYM applied in conjunction with chemical fertilizer was the most popular amendment, with FYM alone preferred more than chemical fertilizer alone - probably because of the latter's long-term detrimental effects. Key informant and householder surveys differed in their perception of fertility changes in the last decade probably because of differences in age and site-specific knowledge. All key informants felt that fertility had declined but among households, only about 40% perceived a decline with the remainder about evenly divided between no change and an increase. Householders with small landholdings (< 0.5 ha) were more likely to perceive increasing soil fertility while those with larger landholdings (> 2 ha) were more likely to perceive declining fertility. Perceived changes in soil fertility were not related to food self-sufficiency. The reasons for the slow spread of new technologies within wards and the poor understanding of optimal use of chemical fertilizers in conjunction with improved quality FYM may repay further investigation in terms of sustaining soil fertility in this region.
Resumo:
Forest canopies are important components of the terrestrial carbon budget, which has motivated a worldwide effort, FLUXNET, to measure CO2 exchange between forests and the atmosphere. These measurements are difficult to interpret and to scale up to estimate exchange across a landscape. Here we review the effects of complex terrain on the mean flow, turbulence, and scalar exchange in canopy flows, as exemplified by adjustment to forest edges and hills, including the effects of stable stratification. We focus on the fundamental fluid mechanics, in which developments in theory, measurements, and modeling, particularly through large-eddy simulation, are identifying important processes and providing scaling arguments. These developments set the stage for the development of predictive models that can be used in combination with measurements to estimate exchange at the landscape scale.
Resumo:
The Brazilian Atlantic Forest harbors the world's richest areas of land planarians (Platyhelminthes: Tricladida). Nevertheless, the number of undiscovered species from this biological unit remains seemingly high. Herein we describe Geoplana piriana Almeida & Carbayo, sp. nov. from the state of Rio de Janeiro, and Geoplana tingauna Kishimoto & Carbayo, sp. nov. from the state of Santa Catarina. Each species shows a dorsum with a unique color pattern among Geoplaninae species. Their internal morphology also differs: G. piriana sp. nov. shows a unique combination of features, including an extrabulbar, non-bifurcated prostatic vesicle, a non-folded male atrium, a horizontal, cylindrical penis papilla, a female atrium anteriorly narrowed, and lined with an epithelium with multilayered aspect. Geoplana tingauna sp. nov. possesses a prostatic vesicle constituted of a pair of branches opening into the very distal portion of a tubular, unpaired portion, a feature not seen in other Geoplaninae species.
Resumo:
Species richness varies greatly across geographical regions. Eastern Arc Mountains (EAM) of Kenya and Tanzania is one of the global biodiversity hotspots. Despite this, high species diversity the explanatory factors have remained largely unexplored. Herein, this study first investigated amphibian species richness patterns in the EAM and particularly the reasons for the low richness in Taita Hills. It tested the hypothesis that the low richness is due to past forest loss or other factors. The results demonstrated that the regional species richness pattern was influenced largely by mean annual rainfall and not forest area. Secondly, using the 26 currently recorded amphibians in the Taita Hills, it investigated the relationship between amphibian species composition along anthropogenic habitat disturbance and elevation gradients. It tested the hypothesis that sites with similar environmental characteristics (temperature, rainfall and elevation), in close proximity and with similar disturbance levels (habitat types) harbour similar species composition. It was found that amphibian species composition differed in terms of elevation and was explained by both temperature and rainfall. Therefore sites with similar environmental characteristics, disturbance levels and in close proximity geographically have similar amphibian composition. Thirdly, diagnostic characters, distribution, basic life history characteristics and conservation status of all currently known amphibians in the Taita Hills were provided. Finally, first long term life history and ecological characteristics of a brevicipitid frog (Callulina sp) was provided. The results showed that this frog abundance and distribution is influenced mainly by mean monthly temperature, breeds during the long dry season and exhibit parental care. Results of this study strongly recommend increasing indigenous forest cover in order to enhance the conservation of the endemic indigenous forest associated amphibians such as Callulina sp, Boulengerula taitana and Boulengerula niedeni.