Shaking-table tests of flat-bottom circular silos containing grain-like material

According to Eurocode 8, the seismic design of flat-bottom circular silos containing grain-like material is based on a rough estimate of the inertial force imposed on the structure by the ensiled content during an earthquake: 80% of the mass of the content multiplied by the peak ground acceleration. A recent analytical consideration of the horizontal shear force mobilised within the ensiled material during an earthquake proposed by some of the authors has resulted in a radically reduced estimate of this load suggesting that, in practice, the effective mass of the content is significantly less than that specified. This paper describes a series of laboratory tests that featured shaking table and a silo model, which were conducted in order to obtain some experimental data to verify the proposed theoretical formulations and to compare with the established code provisions. Several tests have been performed with different heights of ensiled material – about 0.5 mm diameter Ballotini glass – and different magnitudes of grain–wall friction. The results indicate that in all cases, the effective mass is indeed lower than the Eurocode specification, suggesting that the specification is overly conservative, and that the wall–grain friction coefficient strongly affects the overturning moment at the silo base. At peak ground accelerations up to around 0.35 g, the proposed analytical formulation provides an improved estimate of the inertial force imposed on such structures by their contents.

Prediction of minimum spouting velocity in two-dimensional flat bottom spouted beds

Spouted beds have been used in industry for operations such as drying, catalytic reactions, and granulation. Conventional cylindrical spouted beds suffer from the disadvantage of scaleup. Two-dimensional beds have been proposed by other authors as a solution for this problem. Minimum spouting velocity has been studied for such two-dimensional beds. A force balance model has been developed to predict the minimum spouting velocity and the maximum pressure drop. Effect of porosity on minimum spouting velocity and maximum pressure drop has been studied using the model. The predictions are in good agreement with the experiments as well as with the experimental results of other investigators.

Horizontal pressures in cylindrical metal silos and comparison with different international standards

The focus of this research was to evaluate the horizontal pressures on a cylindrical metal silo of corrugated walls and flat bottom with 1.82m diameter and 5.4m high, and to compare the values with those obtained theoretically by the ISO 11697, EP 433 and AS 3774 standards. The silo was symmetrically filled and constant speed with wheat cv. soft red for two different height/diameter ratios (H/D) and was unloaded through three orifices with a diameter of 71.6mm, one concentric and two eccentrics. Horizontal pressures were measured on the walls of the silo at three positions using hydraulic type pressure cells. The results showed that shortly after the start of the unloading, there was a mass flow above the quota of H/D = 1.2, whereas below this quota funnel flow occurred. It can be said that the EP 433 standard was more appropriate to predict horizontal pressures in silos in H/D ratio = 1.0, with eccentric unloading. For the H/D ratio = 1.5, AS 3774 standard was the one that produced values closer to the experimental.

The influence of bottom topography on the decay of modeled Agulhas rings

The influence of a large meridional submarine ridge on the decay of Agulhas rings is investigated with a 1 and 2-layer setup of the isopycnic primitive-equation ocean model MICOM. In the single-layer case we show that the SSH decay of the ring is primarily governed by bottom friction and secondly by the radiation of Rossby waves. When a topographic ridge is present, the effect of the ridge on SSH decay and loss of tracer from the ring is negligible. However, the barotropic ring cannot pass the ridge due to energy and vorticity constraints. In the case of a two-layer ring the initial SSH decay is governed by a mixed barotropic–baroclinic instability of the ring. Again, radiation of barotropic Rossby waves is present. When the ring passes the topographic ridge, it shows a small but significant stagnation of SSH decay, agreeing with satellite altimetry observations. This is found to be due to a reduction of the growth rate of the m = 2 instability, to conversions of kinetic energy to the upper layer, and to a decrease in Rossby-wave radiation. The energy transfer is related to the fact that coherent structures in the lower layer cannot pass the steep ridge due to energy constraints. Furthermore, the loss of tracer from the ring through filamentation is less than for a ring moving over a flat bottom, related to a decrease in propagation speed of the ring. We conclude that ridges like the Walvis Ridge tend to stabilize a multi-layer ring and reduce its decay.

Influência do formato do aquário na sobrevivência e no desenvolvimento de larvas de matrinxã Brycon cephalus (Osteichthyes, Characidae)

Neste experimento, utilizaram-se cinco aquários cilíndricos com relevo no fundo (em forma de anel) e cinco retangulares com fundo liso para estudo da influência do formato do aquário na sobrevivência e no desenvolvimento de larvas de matrinxã Brycon cephalus. Observou-se melhor eficiência dos aquários retangulares, confirmada pela maior sobrevivência e biomassa. Os valores de temperatura, pH, condutividade e oxigênio dissolvido foram similares entre os tipos de aquários, sugerindo que esses parâmetros não influenciaram os resultados. O relevo no fundo dos aquários cilíndricos afetou negativamente o cultivo de larvas de matrinxã, pela criação de zonas com pequena capacidade da água em suspender partículas, o que resultou em acúmulo de dejetos, predadores, competidores e alimento. Aquários retangulares com fundo liso são mais adequados ao cultivo de larvas de matrinxã, por promover melhor circulação da água.

Menires do Alto Algarve oriental : Lavajo I e Lavajo II (Alcoutim)

Neste trabalho apresenta-se o resultado das escavações realizadas respectivamente em 1998 e em 2001 nos núcleos de menires de Lavajo I e de Lavajo II, distanciados cerca de 250 m na direcção NNE e separados pelo pequeno vale do Lavajo. Os locais, actualmente, são intervisíveis, graças à implantação destacada no terreno: Lavajo I situa-se no topo de colina enquanto Lavajo II ocupa a linha de festo de uma encosta, conferindo ao local visibilidade tanto do lado sul como do lado norte. O conjunto de Lavajo I é constituído actualmente por três monólitos, todos de grauvaque: um, quase inteiro, de tendência fálica, é actualmente o maior menir de grauvaque conhecido em território português, atingindo o comprimento máximo de 3,14 m; outro, quase completo, fragmentado em três grandes blocos, possui formato estelar; o restante apresenta-se muito incompleto, dele se conservando apenas uma lasca da sua face frontal. É crível, no entanto, que pudessem existir mais monólitos, tendo em conta os abundantes fragmentos de grauvaque ali observados, quase todos com fracturas frescas. Todos os menires de Lavajo I se apresentam decorados, com destaque para o maior deles, o qual exibe complexa decoração estreitamente relacionada com a morfologia do suporte lítico. Apenas para este foi possível determinar o local de implantação, correspondente a um alvéolo de planta circular e fundo aplanado, parcialmente danificado pelos trabalhos realizados em 1994, que conduziram ao seu reerguimento, infelizmente feito de forma pouco cuidada e incorrecta, visto ter sido colocado no terreno em posição invertida. Seja como for, na zona culminante daquele pequeno cabeço, implantaram-se três menires decorados, os quais não podem ser vistos isoladamente, já que se articulariam directamente com o conjunto de Lavajo II, que se avista ao longe, do outro lado do pequeno vale do Lavajo e na linha de festo da encosta, da qual ocupa a parte média. Neste segundo local, identificaram-se quatro estelas-menir não decoradas, todas de grauvaque, das quais apenas uma, representada por fragmento de pequenas dimensões, se encontrava in situ. Foi, no entanto, possível reconstituir a posição relativa das restantes, através da escavação integral do respectivo alvéolo, correspondente a rasgo alongado, orientado Este-Oeste, aberto no substrato geológico, constituído por xistos do Carbónico Superior finamente folheados. Deste modo, é de concluir que as estelas menir se dispunham em linha, constituindo um painel lítico contínuo. No interior do alvéolo, recolheram-se diversos artefactos ali ritualmente depositados aquando da fundação do monumento, cuja tipologia indica o Neolítico Final, cronologia aliás compatível com a do conjunto megalítico de Lavajo I, tendo presente a iconografia patente nos menires. Muito embora não se conheça ainda suficientemente o padrão de povoamento da região no Neolítico Final, estes dois núcleos megalíticos podem ser interpretados como marcadores de territórios e/ou de espaços sagrados, sendo de destacar a existência, durante todo o ano, de água nas proximidades imediatas, recurso escasso e precioso, que propiciaria a horticultura. Por outro lado, a natureza das matérias-primas utilizadas na confecção dos artefactos encontrados (sílex, anfibolito), para além de outros materiais de circulação transregional muito mais alargada (fibrolite), evidencia a forte interacção destas populações tanto com o interior do Baixo Alentejo (Zona de Ossa/Morena), como com o litoral algarvio ou andaluz, compatível com estádio de desenvolvimento económico do final do Neolítico do sul peninsular. Numa vasta região, correspondente a todo o sotavento algarvio, onde o megalitismo não funerário era até agora totalmente desconhecido, os testemunhos ora estudados constituem, doravante, uma das expressões mais interessantes e significativas do Sudoeste peninsular.

Antimicrobial efficacy of chemical disinfectants on contaminated full metal crowns

Prosthetic restorations that have been tried in the patient's mouth are potential sources of infection. In order to avoid cross-infection, protocols for infection control should be established in dental office and laboratory. This study evaluated the antimicrobial efficacy of disinfectants on full metal crowns contaminated with microorganisms. Full crowns cast in a Ni-Cr alloy were assigned to one control group (n=6) and 5 experimental groups (n=18). The crowns were placed in flat-bottom glass balloons and were autoclaved. A microbial suspension of each type of strain - S. aureus, P. aeruginosa, S. mutans, E. faecalis and C. albicans- was aseptically added to each experimental group, the crowns being allowed for contamination during 30 min. The contaminated specimens were placed into recipients with the chemical disinfectants (1% and 2% sodium hypochlorite and 2% glutaraldehyde) for 5, 10 and 15 min. Thereafter, the crowns were placed into tubes containing different broths and incubated at 35ºC. The control specimens were contaminated, immersed in distilled water for 20 min and cultured in Thioglycollate broth at 35ºC. Microbial growth assay was performed by qualitative visual examination after 48 h, 7 and 12 days. Microbial growth was noticed only in the control group. In the experimental groups, turbidity of the broths was not observed, regardless of the strains and immersion intervals, thus indicating absence of microbial growth. In conclusion, all chemical disinfectants were effective in preventing microbial growth onto full metal crowns.

Potencial de alimentação de Chrysoperla externa (Hagen, 1861) (Neuroptera, Chrysopidae) em diferentes densidades de Uroleucon ambrosiae (Thomas, 1878) (Hemiptera, Aphididae)

Feeding potential of Chrysoperla externa (Hagen) (Neuroptera, Chrysopidae) in different densities of Uroleucon ambrosiae (Thomas) (Hemiptera, Aphididae). The feeding potential of 2nd and 3rd instar larvae of Chrysoperla externa (Hagen, 1861) in relation to different densities of 30, 40 and 50 nymphs of Uroleucon ambrosiae (Thomas, 1878) at 3rd and 4th instars was evaluated. The treatments were individualized into 2.5 cm in diameter and 8.5 cm tall flat bottom glass vials and maintained in a controlled environmental chamber at 25±2 ºC temperature, 70±10% RH and 14 h photophase. A completely randomized experimental design with 10 replications was used. The consumption of the prey nymphs by the predator larvae was evaluated after 1, 2, 4, 8, 16 and 24 h from the beginning of the experiment and at every subsequent 24 h period until 2nd instar larvae molted or 3rd instar larvae pupated. Results have shown that for 2nd instar larvae, during the 1 h to 24 h period, there was a decreasing prey consumption at the 30 and 40 prey densities. However an increase in the consumption at the 50 prey density was observed. After this period, C. externa larvae presented a progressive increase on nymphs consumption as a function of the prey density. The same occurred with de 3rd instar predator larvae in all treatments. When daily mean consumption was evaluated the predator/prey ratio was 1:23, 1:27 and 1:33 for 2nd instar larvae and 1:27, 1:33 and 1:41 for 3rd instar larvae at 30, 40 and 50 nymph densities, respectively.

What is the shape of an air bubble on a liquid surface?

We have calculated the equilibrium shape of the axially symmetric meniscus along which a spherical bubble contacts a flat liquid surface, by analytically integrating the Young-Laplace equation in the presence of gravity, in the limit of large Bond numbers. This method has the advantage that it provides semi-analytical expressions for key geometrical properties of the bubble in terms of the Bond number. Results are in good overall agreement with experimental data and are consistent with fully numerical (Surface Evolver) calculations. In particular, we are able to describe how the bubble shape changes from hemispherical, with a shallow flat bottom, to lenticular, with a deeper, curved bottom, as the Bond number is decreased.

Potencial de alimentação de Chrysoperla externa (Hagen, 1861) (Neuroptera, Chrysopidae) em diferentes densidades de Uroleucon ambrosiae (Thomas, 1878) (Hemiptera, Aphididae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Técnica de criação e parâmetros biológicos de Stegasta bosquella em amendoim

Studies with Stegasta bosquella in peanut crop are little explored by researchers, mainly by the need of obtaining, in the field, a large quantity of closed leaflets. Therefore, it was sought a way of rearing in a natural diet that facilitates the attainment of the insect. The research was developed at the Laboratorio de Resistencia de Plantas a Insetos (FCAV/Jaboticabal) (T: 25 +/- 2 degrees C, RH 60 +/- 10% and photophase: 12 hours) (Runner IAC 886). The rearing stock of was carried out by collecting caterpillars from the field and keeping them in flat bottom glass tubes until adult emergence and test performance. Caterpillars were individualized in Petri dish plates, lined with moistened filter paper, which contained closed and early opened leaflets, but closed with paper clips (imitating the closed leaflet). A randomized design with two treatments and 36 repetitions was used. After the pupae formation, they were separated into five couples and the adults were kept in transparent plastic cages containing a peanut stem with leaves for oviposition, and fed with a 10% honey solution. The duration and viability of the larval and pupal periods, male and female longevity with and without food, and fertility were evaluated. The two forms of larvae rearing (closed leaflet and leaflet closed with clips) did not influence on any of the studied parameters. Therefore, the rearing of S. bosquella becomes feasible in natural diet, which means there is no need to use the enclosed leaflets for this purpose, and implies the easiness for rearing.

Aspectos Biológicos dos Estádios Imaturos de Chrysoperla externa (Hagen) e Ceraeochrysa cincta (Schneider) (Neuroptera: Chrysopidae) Alimentados com Ovos e Ninfas de Bemisia tabaci (Gennadius) Biótipo B (Hemiptera: Aleyrodidae)

Foram avaliados os aspectos biológicos dos estádios imaturos de Chrysoperla externa (Hagen) e Ceraeochrysa cincta (Schneider), alimentados com ovos e ninfas de Bemisia tabaci (Genn.) biótipo B. Ovos dos predadores foram individualizados em recipientes de vidro de fundo chato com 2,5 cm de diâmetro e 8,5 cm de altura que foram mantidos à temperatura de 25±2ºC, UR de 70±10% e fotofase de 14h. Após a eclosão das larvas, discos de folhas de tomateiro e de couve com 2 cm de diâmetro, contendo ovos e ninfas de B. tabaci, respectivamente, foram colocados nos recipientes. A duração e a viabilidade de cada ínstar e da fase pupal de ambas as espécies predadoras alimentadas com diferentes estágios da presa foram avaliados. Larvas de primeiro ínstar de C. externa apresentaram desenvolvimento mais lento quando alimentadas com ovos de B. tabaci biotipo B monstrando influência do estágio da presa fornecida no período de desenvolvimento do predador. O mesmo não ocorreu para a espécie C. cincta. O desenvolvimento de larvas de primeiro ínstar de ambas as espécies predadoras foi semelhante quando foram alimentadas com ovos de B. tabaci; porém C. cincta apresentou período de desenvolvimento mais longo (5,4 dias) comparada a C. externa (4,0 dias) quando alimentada com ninfas da presa. Para larvas de segundo e terceiro ínstares e para a duração da fase larval não houve influência do estágio da presa fornecida (ovo ou ninfa) no período de desenvolvimento. A duração do segundo ínstar foi maior para C. cincta do que para C. externa (4,8 e 4,1 dias, respectivamente). Porém a duração do terceiro instar foi maior e da fase larval foi menor para C. externa (6,6 e 15,3 dias, respectivamente) do que para C. cincta (6,4 e 16,7 dias, respectivamente). A viabilidade dos ínstares foi acima de 90% para ambas as espécies. No entanto, menor porcentagem de viabilidade da fase de pupa foi registrada para C. cincta, quando alimentada com ovos (30%) ou ninfas (55,6%).

Evaluation of the Effects of Endodontic Materials on Fibroblast Viability and Cytokine Production

Introduction: Recently, a new sealer composed of Portland cement named Endo-CPM-Sealer was developed. The aim of this study was to investigate the effects of Endo-CPM-Sealer (EGEO SRL, Buenos Aires, Argentina), Sealapex (Sybron Endo, Glendora, CA), and Angelus MTA (Angelus, Londrina, Brazil) on cell viability and cytokine (interleukin [IL]-1 beta and IL-6) production by mouse fibroblasts. Methods: Millipore culture plate inserts with polyethylene tubes filled with materials were placed into 24-well cell culture plates with mouse fibroblasts. Cells cultured with only empty polyethylene tubes were used as the control. After 24 hours, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay was used to evaluate the cell viability. For cytokine assay, mouse fibroblasts were incubated in 24-well flat-bottom plates with set material disks at the bottom. Cells cultured without the material disks served as the negative control. After 24 hours of incubation, culture media were collected for cytokine evaluation by using an enzyme-linked immunosorbent assay. The data were statistically analyzed by analysis of variance and Bonferroni correction. Results: Endo-CPM-Sealer, Sealapex, and Angelus MTA did not inhibit the cell viability. All materials induced IL-6 releasing, but the amount was not statistically significant compared with the control group. Angelus MTA induced IL-1 beta releasing significantly more than the control. Conclusions: All materials were not considered cytotoxic in fibroblast culture. (J Endod 2009;35:1577-1579)

Optimal Boussinesq model for shallow-water waves interacting with a microstructure

In this paper, we consider the propagation of water waves in a long-wave asymptotic regime, when the bottom topography is periodic on a short length scale. We perform a multiscale asymptotic analysis of the full potential theory model and of a family of reduced Boussinesq systems parametrized by a free parameter that is the depth at which the velocity is evaluated. We obtain explicit expressions for the coefficients of the resulting effective Korteweg-de Vries (KdV) equations. We show that it is possible to choose the free parameter of the reduced model so as to match the KdV limits of the full and reduced models. Hence the reduced model is optimal regarding the embedded linear weakly dispersive and weakly nonlinear characteristics of the underlying physical problem, which has a microstructure. We also discuss the impact of the rough bottom on the effective wave propagation. In particular, nonlinearity is enhanced and we can distinguish two regimes depending on the period of the bottom where the dispersion is either enhanced or reduced compared to the flat bottom case. © 2007 The American Physical Society.