Analysis of the effects of conical indentation variables on the indentation response of elastic-plastic materials through factorial design of experiment

In this work, the effects of conical indentation variables on the load-depth indentation curves were analyzed using finite element modeling and dimensional analysis. A factorial design 2(6) was used with the aim of quantifying the effects of the mechanical properties of the indented material and of the indenter geometry. Analysis was based on the input variables Y/E, R/h(max), n, theta, E, and h(max). The dimensional variables E and h(max) were used such that each value of dimensionless Y/E was obtained with two different values of E and each value of dimensionless R/h(max) was obtained with two different h(max) values. A set of dimensionless functions was defined to analyze the effect of the input variables: Pi(1) = P(1)/Eh(2), Pi(2) = h(c)/h, Pi(3) = H/Y, Pi(4) = S/Eh(max), Pi(6) = h(max)/h(f) and Pi(7) = W(P)/W(T). These six functions were found to depend only on the dimensionless variables studied (Y/E, R/h(max), n, theta). Another dimension less function, Pi(5) = beta, was not well defined for most of the dimensionless variables and the only variable that provided a significant effect on beta was theta. However, beta showed a strong dependence on the fraction of the data selected to fit the unloading curve, which means that beta is especially Susceptible to the error in the Calculation of the initial unloading slope.

Influence of Urea, Isopropanol, and Propylene Glycol on Rutin In Vitro Release from Cosmetic Semisolid Systems Estimated by Factorial Design

Rutin, one of the major flavonoids found in an assortment of plants, was reported to act as a sun protection factor booster with high anti-UVA defense, antioxidant, antiaging, and anticellulite, by improvement of the cutaneous microcirculation. This research work aimed at evaluating the rutin in vitro release from semisolid systems, in vertical diffusion cells, containing urea, isopropanol and propylene glycol, associated or not, according to the factorial design with two levels with center point. Urea (alone and in association with isopropanol and propylene glycol) and isopropanol (alone and in association with propylene glycol) influenced significant and negatively rutin liberation in diverse parameters: flux (g/cm2.h); apparent permeability coefficient (cm/h); rutin amount released (g/cm2); and liberation enhancement factor. In accordance with the results, the presence of propylene glycol 5.0% (wt/wt) presented statistically favorable to promote rutin release from this semisolid system with flux = 105.12 8.59 g/cm2.h; apparent permeability coefficient = 7.01 0.572 cm/h; rutin amount released = 648.80 53.01 g/cm2; and liberation enhancement factor = 1.21 0.07.

Purification of alpha-toxin from Clostridium perfringens type A in PEG-phosphate aqueous two-phase systems: a factorial study

BACKGROUND: Purification of a-toxin produced by Clostridium perfringens type A in aqueous two-phase systems (ATPS) was studied with a full two-level factorial design on two factors (concentrations of 8000 g mol(-1) PEG and phosphate salt at pH 8.0), to estimate the influence of these factors on the purification results. RESULTS: The partition coefficient (K), purification factor (PF) and activity yield (Y) were strongly influenced by the PEG and phosphate concentrations. Raising the levels of the two factors increased these responses. The highest purification factor (5.7) was obtained with PEG and phosphate concentrations of 17.5% and 15%, respectively. CONCLUSION: These results support the proposal that polymer excluded volume and hydrophobic interactions are the factors that drive the alpha-toxin in PEG/phosphate aqueous two-phase systems. (c) 2008 Society of Chemical Industry

Further psychometric study of the Beck Anxiety Inventory including factorial analysis and social anxiety disorder screening

Objective. To analyze the psychometric properties of the Brazilian Portuguese version of the Beck Anxiety Inventory (BAI) in terms of its internal consistency, scores distribution, concurrent and discriminant validity, and factorial analysis in a sample of university students and social anxiety disorder (SAD) cases and non-cases. Methods. A sample of Brazilian university students from the general population (N = 2314) and a sample of university students identified as cases (N = 88) and non-cases (N = 90) of SAD were assessed, using as a parameter the Structured Clinical Interview for the DSM-IV. The different instruments were completed individually in the presence of an experienced rater. Results. The BAI showed adequate internal consistency (0.88-0.92) and discriminant validity, with 0.74 sensitivity and 0.71 specificity for a cut-off score of 10. The factorial analysis suggested a three-factor solution to be the most adequate. Conclusions. The version of the BAI studied is quite adequate to be used in the context of Brazilian university students, identifying the presence of anxiety indicators. However, its usefulness to screen for SAD seems limited.

Factorial validity of the Maslach Burnout Inventory (MBI-HSS) among Spanish professionals

OBJECTIVE: To assess the factorial validity and internal consistency of the Maslach Burnout Inventory (MBI-HSS). METHODS: In a sample consisting of 705 Spanish professionals from diverse occupational sectors (health, education, police and so one), seven plausible factorial models hypothesized were compared using LISREL 8. RESULTS: The four-factor oblique solution and the three-factor oblique solution showed the best and similar fit. Deletion of Item 12 and Item 16, taking into consideration the suggestions in the manual, improved the goodness of fit for both models. The four-factor oblique model suggests that, in addition to Emotional Exhaustion (EE) and Depersonalization (DP), Personal Accomplishment (PA) consists of two components labeled here Self-Competence (Items 4, 7, 17, and 21) and the Existential Component (Items 9, 12, 18, and 19). However, the alpha coefficient was relatively low for the Self-Competence component, suggesting that it is more suitable to estimate the syndrome as a threedimensional construct. The Cronbach's alpha was satisfactory for PA (alpha =.71) and EE (alpha =.85), and moderate for DP (alpha =.58). CONCLUSIONS: The results show that the MBI-HSS offers factorial validity and its scales present internal consistency to evaluate the quality of working life for Spanish professionals.

Optimization of Cu(II) biosorption onto ascophyllum nodosum by factorial design methodology

A Box–Behnken factorial design coupled with surface response methodology was used to evaluate the effects of temperature, pH and initial concentration in the Cu(II) sorption process onto the marine macroalgae Ascophyllum nodosum. The effect of the operating variables on metal uptake capacitywas studied in a batch system and a mathematical model showing the influence of each variable and their interactions was obtained. Study ranges were 10–40ºC for temperature, 3.0–5.0 for pH and 50–150mgL−1 for initial Cu(II) concentration. Within these ranges, the biosorption capacity is slightly dependent on temperature but markedly increases with pH and initial concentration of Cu(II). The uptake capacities predicted by the model are in good agreement with the experimental values. Maximum biosorption capacity of Cu(II) by A. nodosum is 70mgg−1 and corresponds to the following values of those variables: temperature = 40ºC, pH= 5.0 and initial Cu(II) concentration = 150mgL−1.

Optimization process of polyester polymer mortars modified with recycled GFRP waste aggregates – application of factorial experiment design-

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one factor at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as polymer mortar aggregates, without significant loss of mechanical properties with regard to non-modified polymer mortars.

Optimization of HS-SPME analytical conditions using factorial design for trihalomethanes determination in swimming pool water samples

Trihalomethanes (THMs) are widely referred and studied as disinfection by-products (DBPs). The THMs that are most commonly detected are chloroform (TCM), bromodichloromethane (BDCM), chlorodibromomethane (CDBM), and bromoform (TBM). Several studies regarding the determination of THMs in swimming pool water and air samples have been published. This paper reviews the most recent work in this field, with a special focus on water and air sampling, sample preparation and analytical determination methods. An experimental study has been developed in order to optimize the headspace solid-phasemicroextraction (HS-SPME) conditions of TCM, BDCM, CDBM and TBM from water samples using a 23 factorial design. An extraction temperature of 45 °C, for 25min, and a desorption time of 5 min were found to be the best conditions. Analysis was performed by gas chromatography with an electron capture detector (GC-ECD). The method was successfully applied to a set of 27 swimming pool water samples collected in the Oporto area (Portugal). TCM was the only THM detected with levels between 4.5 and 406.5 μg L−1. Four of the samples exceeded the guideline value for total THMs in swimming pool water (100 μgL−1) indicated by the Portuguese Health Authority.

Testing Nelder-Mead Based Repulsion Algorithms for Multiple Roots of Nonlinear Systems via a Two-Level Factorial Design of Experiments

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

Modelos de análise factorial dinâmica: uma abordagem no domínio da frequência

O objectivo deste trabalho é o de apresentar as ferramentas teóricas necessárias para compreender o funcionamento dos modelos em Factores Dinâmicos. Dar-se-á ênfase às metodologias que utilizam conceitos ligados à Análise Espectral. A ideia fundamental subjacente à análise no domínio da frequência é de que qualquer processo estacionário pode ser visto como a soma de um número infinito de componentes periódicas não correlacionadas. A análise no domínio da frequência permite-nos estudar a relação entre as componentes periódicas das variáveis associadas e uma determinada frequência.

Testing Nelder-Mead based repulsion algorithms for multiple roots of nonlinear systems via a two-level factorial design of experiments

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

Development of a water-in-oil-in-water multiple emulsion system integrating biomimetic aqueous-core lipid nanodroplets for protein entity stabilization. Part I: experimental factorial design

Lipid nanoballoons integrating multiple emulsions of the type water-in-oil-in-water enclose, at least in theory, a biomimetic aqueous-core suitable for housing hydrophilic biomolecules such as proteins, peptides and bacteriophage particles. The research effort entertained in this paper reports a full statistical 23x31 factorial design study (three variables at two levels and one variable at three levels) to optimize biomimetic aqueous-core lipid nanoballoons for housing hydrophilic protein entities. The concentrations of protein, lipophilic and hydrophilic emulsifiers, and homogenization speed were set as the four independent variables, whereas the mean particle hydrodynamic size (HS), zeta potential (ZP) and polydispersity index (PI) were set as the dependent variables. The V23x31 factorial design constructed led to optimization of the higher (+1) and lower (-1) levels, with triplicate testing for the central (0) level, thus producing thirty three experiments and leading to selection of the optimized processing parameters as 0.015% (w/w) protein entity, 0.75% (w/w) lipophilic emulsifier (soybean lecithin) and 0.50% (w/w) hydrophilic emulsifier (poloxamer 188). In the present research effort, statistical optimization and production of protein derivatives encompassing full stabilization of their three-dimensional structure, has been attempted via housing said molecular entities within biomimetic aqueous-core lipid nanoballoons integrating a multiple (W/O/W) emulsion.

Distribución factorial del ingreso en América Latina, 1950-2000: nuevas series a partir de las cuentas nacionales

Este artículo presenta nuevas series de distribución factorial del ingreso entre 1950 y 2000 para 14 países de América Latina a partir de un proceso de armonización de los datos de compensación de los trabajadores recogidos en las cuentas nacionales. Además, se presentan estimaciones de la remuneración a los trabajadores autónomos, discutiéndose las diferentes metodologías de estimación posibles, y las limitaciones de datos que afectan a las mismas. El análisis de estas estimaciones coherentes nos permite llegar a algunas conclusionespreliminares. En primer lugar, las estimaciones presentan variaciones importantes entre los países. Segundo, a nivel regional, muestran variaciones tanto coyunturales como de largo plazo que apoyanlos estudios que cuestionan la estabilidad de la distribución factorial del ingreso en el largo plazo.Tercero, nuestras estimaciones de la remuneración del factor trabajo, una vez corregidas para incluir una estimación del trabajo no asalariado, siguen siendo sensiblemente inferiores a las de lospaíses desarrollados, cuestionando así los estudios que señalan que dichas variaciones desaparecen al aplicárseles esta corrección.

Propiedades psicométricas y estructura factorial de la Escala de Identidad Étnica Multigrupo en español (MEIM)

En este trabajo investigó la consistencia interna y la estructura factorial, comparando tres modelos de medición, de una versión en español de 12 ítems de la Escala de Identidad Étnica Multigrupo de Phinney, en una muestra de 631 estudiantes mexicanos (301 indígenas y 330 mestizos) entre 17 y 40 años de edad. Los resultados apoyan la consistencia interna de la medida y apuntan a una estructura de dos factores de la identidad étnica: la afirmación o identificación étnica y la exploración étnica. Así mismo, se encontraron diferencias estadísticamente significativas en los grupos estudiados, siendo los indígenas quienes puntúan más alto en identidad étnica y sus componentes. Sugerimos que se necesitan más investigaciones para evaluar la identidad étnica y validar la medida y los factores de la identidad étnica a través de diversos grupos étnicos con otras muestras de adolescentes y adultos de habla hispana

Una comparación de la selección de los ratios contables en los modelos contable-financieros de predicción de la insolvencia empresarial : la literatura previa frente al analisis factorial

En los últimos 30 años la proliferación de modelos cuantitativos de predicción de la insolvencia empresarial en la literatura contable y financiera ha despertado un gran interés entre los especialistas e investigadores de lamateria. Lo que en un principio fueron unos modelos elaborados con un único objetivo, han derivado en una fuente de investigación constante.En este documento se formula un modelo de predicción de la insolvencia a través de la combinación de diferentes variables cuantitativas extraídas de los estados contables de una muestra de empresas para los años 1994-1997. A través de un procedimiento por etapas se selecciona e interpreta cuáles son las más relevantes en cuanto a aportación de información.Una vez formulado este primer tipo de modelos se busca una alternativa a las variables anteriores a través de la técnica factorial del análisis de componentes principales. Con ella se hace una selección de variables y se aplica, junto conlos ratios anteriores, el análisis univariante. Por último, se comparan los modelos obtenidos y se concluye que aunque la literatura previa ofrece mejores porcentajes de clasificación, los modelos obtenidos a través del análisis decomponentes principales no deben ser rechazados por la claridad en la explicación de las causas que conducen a una empresa a la insolvencia.