Desenvolvimento de embalagem biodegradável ativa a base de fécula de mandioca e agentes antimicrobianos naturais.

Aliado ao fato dos biomateriais ainda serem pouco explorados pelas indústrias alimentícias, este trabalho propôs o desenvolvimento de embalagens que sejam, além de biodegradáveis, também ativas através do uso de um agente antimicrobiano natural capaz de inibir a proliferação de fungos correntes em produtos de panificação (Penicillium commune e Eurotium amstelodami). Primeiramente, filmes biodegradáveis a base de fécula de mandioca foram elaborados pela técnica de casting, usando açúcares e glicerol como plastificantes. O aumento do conteúdo de glicerol causou diminuição da resistência máxima à tração e elevação dos valores de propriedades de barreira. Numa segunda etapa do trabalho, a introdução de nanopartículas de argila esmectita influenciou positivamente as propriedades de barreira dos filmes, devido à diminuição observada nos valores de permeabilidade ao vapor de água e coeficiente de permeabilidade ao oxigênio. Nesta fase, a variação do conteúdo de glicerol também afetou significativamente as propriedades mecânicas e de barreira dos filmes biodegradáveis. As concentrações inibitórias mínimas dos óleos essenciais de cravo e de canela contra os fungos estudados foram definidas e o óleo essencial de canela foi selecionado, para ser incorporado aos filmes biodegradáveis, em três conteúdos distintos, pois foi o composto que mostrou uma inibição mais eficiente. A atividade antimicrobiana dos filmes biodegradáveis com incorporação de óleo essencial de canela foi testada sobre os micro-organismos escolhidos através de testes de difusão em halo, cujos resultados foram suficientes para demonstrar o potencial ativo da embalagem desenvolvida. Como método alternativo de incorporação do agente antimicrobiano, gás carbônico (CO2) em estado supercrítico foi utilizado como solvente. Os resultados obtidos foram promissores, uma vez que se observou incorporação de agente antimicrobiano dentro da matriz polimérica em quantidade suficiente para inibir a proliferação dos fungos testados.

Avaliação energética e econômica da substituição de tubetes de plástico por tubetes biodegradáveis na produção de mudas de aroeira - Schinus terebinthifokius Raddi

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de nova embalagem para comercialização, transporte e liberação do parasitoide Cotesia flavipes (Cameron, 1891) (Hymenoptera: Braconidae)

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Desenvolvimento e otimização de um filme biodegradável à base de proteína do tremoço (Lupinus angustifolius)

Dissertação de Mestrado, Biologia Molecular e Microbiana, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Polyurethane (PU) scaffolds prepared by solvent casting/particulate leaching (SCPL) combined with centrifugation

This article reports an enhanced solvent casting/particulate (salt) leaching (SCPL) method developed for preparing three-dimensional porous polyurethane (PU) scaffolds for cardiac tissue engineering. The solvent for the preparation of the PU scaffolds was a mixture of dimethylformamide (DFM) and tetrahydrofuran (THF). The enhanced method involved the combination of a conventional SCPL method and a step of centrifugation, with the centrifugation being employed to improve the pore uniformity and the pore interconnectivity of scaffolds. Highly porous three-dimensional scaffolds with a well interconnected porous structure could be achieved at the polymer solution concentration of up to 20% by air or vacuum drying to remove the solvent. When the salt particle sizes of 212-295, 295-425, or 425-531 µm and a 15% w/v polymer solution concentration were used, the porosity of the scaffolds was between 83-92% and the compression moduli of the scaffolds were between 13 kPa and 28 kPa. Type I collagen acidic solution was introduced into the pores of a PU scaffold to coat the collagen onto the pore walls throughout the whole PU scaffold. The human aortic endothelial cells (HAECs) cultured in the collagen-coated PU scaffold for 2 weeks were observed by scanning electron microscopy (SEM). It was shown that the enhanced SCPL method and the collagen coating resulted in a spatially uniform distribution of cells throughout the collagen-coated PU scaffold.

Use of micro-ATR/FTIR imaging to study heterogeneous polymer oxidation by direct solvent casting onto the ATR IRE

A technique is described whereby micro-ATR/FTIR imaging can be used to follow polymer degradation reactions in situ in real time. The internal reflection element (IRE) assembly is removed from the ATR objective and polymer is solvent cast directly onto the IRE surface. The polymer is then subjected to degradation conditions and molecular structural changes monitored by periodically replacing the IRE assembly back in the ATR objective and collecting spectra which can be used to construct images. This approach has the benefit that the same part of the sample is always studied, and that contact by pressure which might damage the polymer surface is not required. The technique is demonstrated using the polymer Topas which was degraded by exposure to UVC light in air.

Central Queensland Mining Supplies Pty Ltd v Columbia Steel Casting Co Ltd

In Central Queensland Mining Supplies Pty Ltd v Columbia Steel Casting Co Ltd [2011] QSC 183 Applegarth J considered complaints made by the defendant about the approach the plaintiff had taken in its endeavour to comply with its disclosure obligation under r 211 of the Uniform Civil Procedure Rules 1999 (Qld). The judgment also provides an indication of the direction the court is taking in relation to disclosure and document management in matters involving large numbers of documents.

Progress towards slip-casting YBa2Cu3O7-x monoliths

Sintered bars of YBa2Cu3O7-x obtained by slip-casting are investigated for drying and sintering behaviour. High J(cm) values (approximate to 10(6) A/cm(2) at 77K) are obtained, although J(ct) values are low (approximate to 10(2) A/cm(2) at 77K). Microstructural characterisation is undertaken on selected samples which demonstrate significant differences in physical density and critical current density.

Shape-formed ceramic superconductors by slip-casting

In order to rigorously test emerging applications using prototypes and pilot designs, high temperature superconductor (HTS) materials must be fabricated into a variety of shapes in an economical manner. We have developed a simple, economical, ceramic slip-casting approach to form complex shaped monolithic HTS articles for which high bulk density has been achieved. The sintered articles exhibit good Meissner signal and consist of phase-pure HTSC phase. A low transport critical current density is observed and is explained on the basis of densification and grain growth. © 1995 The Metallurgical of Society of AIME.

Telstra on the TV casting couch to trump its telco peers

This week, Telstra announced it will shortly introduce a new streaming video set top box. For a number of reasons, this is a very smart move.

A water model study of the flow asymmetry inside a continuous slab casting mold

The work studies the extent of asymmetric flow in water models of continuous casting molds of two different configurations. In the molds where fluid is discharged through multiple holes at the bottom, the flow pattern in the lower portion depends on the size of the lower two recirculating domains. If they reach the mold bottom, the flow pattern in the lower portion is symmetrical about the central plane; otherwise, it is asymmetrical. On the other hand, in the molds where the fluid is discharged through the entire mold cross section, the flow pattern is always asymmetrical if the aspect ratio is 1:6.25 or more. The fluid jet swirls while emerging through the nozzle. The interaction of the swirling Jets with the wide sidewalls of the mold gives rise to asymmetrical flow inside the mold. In the molds with lower aspect ratios, where the jets do not touch the wide side walls, the flow pattern is symmetrical about the central plane.