Extração de boro de água produzida sintética por sistema microemulsionado

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Reciclagem de material asfáltico fresado utilizando solventes e microemulsões

With the increase of asphalt milling services was also a significant increase in recycling services pavements. The techniques used today are basically physical processes in which the milled material is incorporated into new asphalt mixtures or executed on site, with the addition of virgin asphalt and rejuvenating agent. In this paper seeks to analyze the efficiency of extraction of CAP (Petroleum Asphalt Cement) mixtures from asphalt milling, using commercial solvents and microemulsions. The solvents were evaluated for their ability to solubilize asphalt using an extractor reflux-type apparatus. Pseudoternary diagrams were developed for the preparation of microemulsion O/W surfactant using a low-cost coconut oil saponified (OCS). Microemulsions were used to extract the CAP of asphalt through physicochemical process cold. Analysis was performed concentration of CAP in solution by spectroscopy. The data provided in the analysis of concentration by the absorbance of the solution as the basis for calculating the percentage of extraction and the mass flow of the CAP in the solution. The results showed that microemulsions prepared with low concentration of kerosene and butanol/OCS binary has high extraction power of CAP and its efficiency was higher than pure kerosene, reaching 95% rate of extraction

Utilização de microemulsões como agentes modificadores de superfícies para remoção de íons metálicos

The heavy metals are used in many industrial processes and when discharged to the environment can cause harmful effects to human, plants and animals. The adsorption technology has been used as an effective methodology to remove metallic ions. The search for new adsorbents motivated the development of this research, accomplished with the purpose of removing Cr (III) from aqueous solutions. Diatomite, chitosan, Filtrol 24TM and active carbon were used as adsorbents. To modify the adsorbent surface was used a bicontinuous microemulsion composed by water (25%), kerosene (25%), saponified coconut oil (10%) and as co-surfactant isoamyl or butyl alcohols (40%). With the objective of developing the best operational conditions the research started with the surfactant synthesis and after that the pseudo-ternary diagrams were plotted. It was decided to use the system composed with isoamyl alcohol as co-surfactant due its smallest solubility in water. The methodology to impregnate the microemulsion on the adsorbents was developed and to prepare each sample was used 10 g of adsorbent and 20 mL of microemulsion. The effect of drying time and temperature was evaluated and the best results were obtained with T = 65 ºC and t = 48 h. After evaluating the efficiency of the tested adsorbents it was decided to use chitosan and diatomite. The influence of the agitation speed, granule size, heavy metal synthetic solution concentration, pH, contact time between adsorbent and metal solution, presence or not of NaCl and others metallic ions in the solution (copper and nickel) were evaluated. The adsorption isotherms were obtained and Freundlich and Langmuir models were tested. The last one correlated better the data. With the purpose to evaluate if using a surfactant solution would supply similar results, the adsorbent surface was modified with this solution. It was verified that the adsorbent impregnated with a microemulsion was more effective than the one with a surfactant solution, showing that the organic phase (kerosene) was important in the heavy metal removal process. It was studied the desorption process and verified that the concentrated minerals acids removed the chromium from the adsorbent surface better than others tested solutions. The treatment showed to be effective, being obtained an increase of approximately 10% in the chitosan s adsorption capacity (132 mg of Cr3+ / g adsorbent), that was already quite efficient, and for diatomite, that was not capable to remove the metal without the microemulsion treatment, it was obtained a capacity of 10 mg of Cr3+ / g adsorbent, checking the applied treatment effectiveness

Estudo da influência de tensoativos em sistemas microemulsionados na extração de gálio e alumínio

Gallium is an important material used in the electronic industry whose demand in the world market is increasing in view of its potential applications. A selective technique is required to allow for the production of the metal, separated from aluminium. Due to the fact that microemulsions constitute an attractive alternative to metal extraction procedures, microemulsified systems have been employed as gallium-selective extraction agents. Two surfactants have been synthesized: sodium 12-N,N-diethylamino-9,10-dihydroxyestearate (AMINE) and saponified coconut oil (SCO), both produced from raw materials readily available in Northeastern Brazil. Also, the commercial extraction agent KELEX-100, conventionally used with the same purpose, has been used in this work for comparison. The optimization of the extraction process with microemulsions was carried out by investigating the influence of some parameters, namely the type of cosurfactant, the cosurfactant/surfactant (C/S) ratio, the pH and concentration of metals in the aqueous phase. Pseudoternary diagrams, which are representative of the microemulsified systems under study, have been constructed in order to establish the boundaries of the regions where the several Winsor systems are formed. An experimental planning methodology (Scheffé Net) has been used to optimize the extraction. The extraction percentage values were as high as 100% for gallium and 99.99% for aluminium for the system with KELEX-100; 96.6% for gallium and 98.8% for aluminium for the system containing AMINE; and 88% for gallium and 85% for aluminium for the system with SCO. The microemulsified system chosen for presenting the best results in gallium extraction was composed by SCO/isoamyl alcohol/kerosene/Bayer licquor with a C/S ratio of 28 and pH of the original aqueous phase of 6.0. The selectivity that has not been observed in the extraction stage was accomplished in the reextraction process using HCl. For the KELEX-100 system, gallium was reextracted at 100% with 6M HCl and aluminium was reextracted at 100% with 0.8M HCl. For the AMINE system, the reextraction percentages were also 100% for both metals, using 6M HCl for gallium and 0.5M HCl for aluminium. On the other hand, the reextraction percentages for the system with SCO were as high as 84% for gallium and 92% for aluminium, with HCl in the same concentrations as those used in the AMINE system. Finally, an optimized system was applied in the gallium extraction process employing a reciprocating perforated-plates extractor. As a result, the metal content was extracted at a recovery rate of 95% for gallium and 97% for aluminium

Extração de boro de água produzida sintética por sistema microemulsionado

Boron is a semi-metal present in certain types of soils and natural waters. It is essential to the healthy development of plants and non-toxic to humans, depending on its concentration. It is used in various industries and it s present in water production coming from oil production. More specifically in Rio Grande do Norte, one of the largest oil producers on shore of Brazil, the relationship water/oil in some fields becomes more than 90%. The most common destination of this produced water is disposal in open sea after processing to meet the legal specification. In this context, this research proposes to study the extraction of boron in water produced by microemulsion systems for industrial utilization. It was taken into account the efficiency of extraction of boron related to surfactant (DDA and OCS, both characterized by FT-IR), cosurfactant (butanol and isoamyl alcohol), organic phase (kerosene and heptanes) and aqueous phase (solution of boron 3.6 ppm in alkaline pH). The ratio cosurfactant/ surfactant used was four and the percentage of organic phases for all points of study was set at 5%. It was chosen points with the highest percentage of aqueous phase. Each system was designed for three points of different compositions in relation to the constituents of a pseudoternary diagram. These points were chosen according to studies of phase behavior in pseudoternary diagrams made in previous studies. For this research, points were chosen in the Winsor II region. The excess aqueous solution obtained in these systems was separated and analyzed by ICP OES. For the data set obtained, the better efficiency in the extraction of boron was obtained using the system with DAC, isoamyl alcohol and heptanes, which extracted 49% in a single step. OCS was not viable to the extraction of boron by microemulsion system in the conditions defined in this study

Os diagramas do sistema de atendimento à infância: suas lentes punitivas.

O presente trabalho se propõe a colocar em análise as relações de três famílias pobres com o Sistema de Garantia de Direitos (SGD), as quais, por fim, tiveram o seu poder familiar destituído, sob a perspectiva da moralização, da disciplina, da vigilância e do controle. As tramas e os caminhos tortuosos, as práticas sociais punitivas e penais, as relações de verdades e os poderes que se exercem e se atualizam, as resistências e os jogos de tensões e forças que se apresentam, tudo isso está posto e descrito nas linhas desta pesquisa, à luz de autores clássicos como Foucault (principalmente), Deleuze, Guattari, Lourau, Nietzche, Donzelot, bem como contribuições mais próximas de autores nacionais, que se debruçam em estudos e pesquisas sobre os temas acima e dialogam com as situações em análise nesta pesquisa. Desnaturalizar os lugares constituídos à luz da moral, das produções subjetivas contemporâneas, dos costumes higienistas e correcionais, das tentativas de enquadramento das práticas familiares, de um jeito de ser pai e mãe, é um dos principais propósitos desta pesquisa. Trata-se de pensar e criar outras possibilidades, como um sopro de liberdade, de desconstrução de lugares, de outras perspectivas e práticas possíveis.

Utilização de diagramas causais em confundimento e viés de seleção.

Apesar do crescente reconhecimento do potencial dos diagramas causais por epidemiologistas, essa técnica ainda é pouco utilizada na investigação epidemiológica. Uma das possíveis razões é que muitos temas de investigação exigem modelos causais complexos. Neste trabalho, a relação entre estresse ocupacional e obesidade é utilizada como um exemplo de aplicação de diagramas causais em questões relacionadas a confundimento. São apresentadas etapas da utilização dos diagramas causais, incluindo a construção do gráfico acíclico direcionado, seleção de variáveis para ajuste estatístico e a derivação das implicações estatísticas de um diagrama causal. A principal vantagem dos diagramas causais é tornar explícitas as hipóteses adjacentes ao modelo considerado, permitindo que suas implicações possam ser analisadas criticamente, facilitando, desta forma, a identificação de possíveis fontes de viés e incerteza nos resultados de um estudo epidemiológico.

Previsão de diagramas de carga via Holt-Winters com três sazonalidades

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

Desarrollo de la habilidad de elaborar gráficas, esquemas y diagramas en el aprendizaje de las matemáticas [por] José Eleazar Luna Valdés.

Tesis (Maestría en la Enseñanza de las Ciencias con Especialidad en Matemáticas) U.A.N.L.

La formación de la habilidad en la construcción e interpretación de diagramas de fases según teoría de P. Ya. Galperin.

Se presentan los resultados de un experimento en el ámbito educativo llevado a cabo con estudiantes de química dentro de la carrera de ingeniería mecánica. El objetivo del experimento fue estudiar el desarrollo de la capacidad general para el programa de estudios como proceso de construcción del conocimiento basado en la teoría de asimilación de P.Ya Galperin. En el análisis de datos se consideraron como parámetros el grado de generalización, el grado de independencia, el grado de consciencia. Los resultados apuntan que bajo este enfoque los alumnos no sólo se ven favorecidos en los procesos de tipo cognitivo sino tambien los procesos motivacionales.

Diagramas posición-tiempo para enseñar relatividad en el bachillerato.

La enseñanza de elementos de física moderna y, en particular, de la teoría de la relatividad es hoy un reto importante y difícil para el profesorado de los nuevos bachilertatos LOGSE. En el contexto de una metodología de enseñanza de las ciencias como investigación mostramos una herramienta didáctica que juzgamos muy útil para contribuir a que los estudiantes se apropien de conceptos básicos de esta teoría: el manejo de diagramas gráficos posición-tiempo relativistas.

Diagramas de relaciones lógicas en tareas de transformación para preescolares.

Resumen tomado de la publicación. Anexos con entrevistas y los diagramas relacionales

Interpretación de los diagramas de dispersión por los alumnos de bachillerato.

Resumen tomado de la publicación

Interpretación de los diagramas de dispersión por estudiantes de bachillerato.

Resumen tomado de la publicación

Herramienta de edición de diagramas de clases con generación de código.

Realizado en la Escuela Politécnica Superior, por 7 profesores del centro. El objetivo era construir una herramienta software que asista al alumno de Ingeniería Técnica en Informática de Gestión e Ingeniería Informática en la elaboración del diseño de diagramas de clases y posterior implementación de sistemas software a través de un mapeo en lenguaje Java. El proyecto se ha desarrollado en 10 fases: 1. Fijación de objetivos y plan detallado; 2. Especificación del proyecto; 3. Análisis; 4. Diseño; 5. Implementación y pruebas unitarias en fases iterativas, con realimentación al diseño; 6. Pruebas de integración; 7. Liberación del prototipo de la aplicación; 8. Revisión y correcciones al prototipo; 9. Explotación de la aplicación; 10. Publicación de memoria y conclusiones. Junto a la memoria con los conocimientos técnicos se adjunta un CD-ROM con el software. Se ha conseguido una herramienta práctica y efectiva en base al objetivo propuesto y el mejor resultado es el de la generación del código.