Numerical study of the Ginzburg-Landau-Langevin equation: coherent structures and noise perturbation theory

Pós-graduação em Física - IFT

Electrical scanning probe microscopy on organic optoelectronic structures

In the field of organic optoelectronics, the nanoscale structure of the materials has huge im-pact on the device performance. Here, scanning force microscopy (SFM) techniques become increasingly important. In addition to topographic information, various surface properties can be recorded on a nanometer length scale, such as electrical conductivity (conductive scanning force microscopy, C-SFM) and surface potential (Kelvin probe force microscopy, KPFM).rnrnIn the context of this work, the electrical SFM modes were applied to study the interplay be-tween morphology and electrical properties in hybrid optoelectronic structures, developed in the group of Prof. J. Gutmann (MPI-P Mainz). In particular, I investigated the working prin-ciple of a novel integrated electron blocking layer system. A structure of electrically conduct-ing pathways along crystalline TiO2 particles in an insulating matrix of a polymer derived ceramic was found and insulating defect structures could be identified. In order to get insights into the internal structure of a device I investigated a working hybrid solar cell by preparing a cross cut with focused ion beam polishing. With C-SFM, the functional layers could be identified and the charge transport properties of the novel active layer composite material could be studied. rnrnIn C-SFM, soft surfaces can be permanently damaged by (i) tip induced forces, (ii) high elec-tric fields and (iii) high current densities close to the SFM-tip. Thus, an alternative operation based on torsion mode topography imaging in combination with current mapping was intro-duced. In torsion mode, the SFM-tip vibrates laterally and in close proximity to the sample surface. Thus, an electrical contact between tip and sample can be established. In a series of reference experiments on standard surfaces, the working mechanism of scanning conductive torsion mode microscopy (SCTMM) was investigated. Moreover, I studied samples covered with free standing semiconducting polymer nano-pillars that were developed in the group of Dr. P. Theato (University Mainz). The application of SCTMM allowed non-destructive imag-ing of the flexible surface at high resolution while measuring the conductance on individual pillarsrnrnIn order to study light induced electrical effects on the level of single nanostructures, a new SFM setup was built. It is equipped with a laser sample illumination and placed in inert at-mosphere. With this photoelectric SFM, I investigated the light induced response in function-alized nanorods that were developed in the group of Prof. R. Zentel (University Mainz). A block-copolymer containing an anchor block and dye moiety and a semiconducting conju-gated polymer moiety was synthesized and covalently bound to ZnO nanorods. This system forms an electron donor/acceptor interface and can thus be seen as a model system of a solar cell on the nanoscale. With a KPFM study on the illuminated samples, the light induced charge separation between the nanorod and the polymeric corona could not only be visualized, but also quantified.rnrnThe results demonstrate that electrical scanning force microscopy can study fundamental processes in nanostructures and give invaluable feedback to the synthetic chemists for the optimization of functional nanomaterials.rn

Faulted Structures in Li Ion Exchanged NaMO2 (M=Ni(0.25)Mn(0.75))

A family of LiMO2 materials (M=Ni0.25Mn0.75) was prepared from Na1.2-xLixMO∂ precursors (0≤x≤0.6) via ion exchange. The resulting IE products were examined via XRD and compared to simulated XRD patterns produced using DIFFax to determine the defect structures resulting from the IE process. For the 0.1≤x≤0.6 materials, it is observed that there are 3 LiMO2 sub-phases with different Li contents present. As the amount of Li in the precursor increases, the amount of each phase changes resulting in a net shift to higher 2-theta; corresponding to an overall decrease in lattice parameter, approaching the theoretical values for LiMO2. Additionally, as x increases, the probability of O3-type shifting increases, most likely due to an increase in the amount O3-Li2MO3 minority phase which acts to weaken bonds in the TM layer, allowing the O3 shift to occur more easily. For the x=0 IE product, it was seen that the product had an ~O2-type structure, but with lattice parameters closer to those expected for a NaMO2 material.

Low temperature structural transitions in dipolar hard spheres: the influence on magnetic properties

We investigate the structural chain-to-ring transition at low temperature in a gas of dipolar hard spheres (DRS). Due to the weakening of entropic contribution, ring formation becomes noticeable when the effective dipole-dipole magnetic interaction increases, It results in the redistribution of particles from usually observed flexible chains into flexible rings. The concentration (rho) of DI-IS plays a crucial part in this transition: at a very low rho only chains and rings are observed, whereas even a slight increase of the volume fraction leads to the formation of branched or defect structures. As a result, the fraction of DHS aggregated in defect-free rings turns out to be a non-monotonic function of rho. The average ring size is found to be a slower increasing function of rho when compared Lo that of chains. Both theory and computer simulations confirm the dramatic influence of the ring formation on the rho-dependence of the initial magnetic susceptibility (chi) when the temperature decreases. The rings clue to their zero total dipole moment are irresponsive to a weak magnetic field and drive to the strong decrease of the initial magnetic susceptibility. (C) 2014 Elsevier B.V. All rights reserved.

Growth And Characterization Of Diammonium Hydrogen Citrate And Citric Acid Monohydrate Single Crystals

Over the past years there has been considerable interest in the growth of single crystals both from the point of view of basic research and technological application. With the revolutionary emergence of solid state electronics which is based on single crystal technolo8Ys basic and applied studies on crystal growth and characterization _have gained a-more significant role in material science. These studies are being carried out for single crystals not only of semiconductor and other electronic materials but also of metals and insulators. Many organic crystals belonging to the orthorhombic class exhibit ferroelectric, electrooptic, triboluminescent and piezoelectric properties. Diammonium Hydrogen Citrate (DAHC) crystals are reported to be piezoelectric and triboluminescent /1/. Koptsik et al. /2/ have reported the piezoelectric nature of Citric Acid Monohydrate (CA) crystals. And since not much work has been done on these crystals, it has been thought useful to grow and characterize these crystals. This thesis presents a study of the growth of these crystals from solution and their defect structures. The results of the microindentation and thermal analysis are presented. Dielectric, fractographic, infrared (IR) and ultraviolet (UV) studies of DAHC crystals are also reported

Nonlinear dynamics of short traveling capillary-gravity waves

We establish a Green-Nagdhi model equation for capillary-gravity waves in (2+1) dimensions. Through the derivation of an asymptotic equation governing short-wave dynamics, we show that this system possesses (1 + 1) traveling-wave solutions for almost all the values of the Bond number θ (the special case θ=1/3 is not studied). These waves become singular when their amplitude is larger than a threshold value, related to the velocity of the wave. The limit angle at the crest is then calculated. The stability of a wave train is also studied via a Benjamin-Feir modulational analysis. ©2005 The American Physical Society.

Influence of titanium and lutetium on the persistent luminescence of ZrO2

Non-doped as well as titanium and lutetium doped zirconia (ZrO2) materials were synthesized via the sol-gel method and structurally characterized with X-ray powder diffraction. The addition of Ti in the zirconia lattice does not change the crystalline structure whilst the Lu doping introduces a small fraction of the tetragonal phase. The UV excitation results in a bright white-blue luminescence at ca. 500 nm for all the materials which emission could be assigned to the Ti3+ e(g) -> t(2g) transition. The persistent luminescence originates from the same Ti3+ center. The thermoluminescence data shows a well-defined though rather similar defect structures for all the zirconia materials. The kinetics of persistent luminescence was probed with the isothermal decay curve analyses which indicated significant retrapping. The short duration of persistent luminescence was attributed to the quasi-continuum distribution of the traps and to the possibility of shallow traps even below the room temperature. (C) 2012 Optical Society of America

Dynamik von Polymerschmelzen und Quellverhalten ungeordneter Netzwerke

Deutsch:Mit Hilfe eines parallelen Molekulardynamik-Programmswurden einfach Modelle von Homopolymerschmelzen simuliert.Langkettige Schmelzen zeigten eine sehr gute Übereinstimmungmit den Vorhersagendes Reptationsmodells. Die intermediären Reptationsbereichemit den vorhergesagtenExponenten konnten wesentlich klarer als bisher verifiziertwerden. Es stellteVerschiedene, gebräuchliche Analyse-Methoden führten jedochzuunterschiedlichen Aussagen für die Verhakungslänge. Fürkurze Kettenbzw. kurze Unterketten wurden in dichten Schmelzendie Abweichungen vom Rouse-Modell aufgezeigt. DieseAbweichungenkönnen als Korrelationslocheffekt interpretiert werden undsteht in teilweiser Übereinstimmung zu den Vorhersagenrenormierter Rouse-Modelle. Aus den Schmelzen wurden Netzwerke in einem speziellenZufallsvernetzungsprozeßhergestellt, der die Bildung von Defektstrukturenunterbindet. Diesewurden bzgl. ihres Quell- und Deformationsverhaltenuntersucht. Der maximaleQuellgrad eines Netzwerkes war bereits bei verhaltnismäßigkurzen Kettenlängenverhakungslimitiert. Die Struktur der Ketten in einem biszum osmotischenGleichgewicht gequollenen Netzwerk unterhalb derMaschengröße ist die überstreckter,selbstvermeidender Ketten mit einer Fraktaldimension von D =1.4,jenseits der Maschengröße (bzw. Verhakungslänge) nehmen siedie Struktur einesIrrfluges an (D = 2). Gequollene Netzwerke zeigten, wie auch in Experimenten, einestarkeZunahme von Dichtefluktuationen, welche unter Verstreckunganisotropwurde und in der Streufunktion zu sogenanntenButterfly-Mustern führt.Diese Fluktuationen sind statischer Natur als Folge desEinfrierenseines ungeordneten Zustandes während der Vernetzung.

Bruchmechanismen an Polymergrenzflächen

In der vorliegenden Arbeit wurden Untersuchungen zur Aufklärung des Versagens thermisch verschweißter Polymergrenzflächen (hier: Polymethylmethacrylat) durchgeführt. Solch ein Wissen kommt in der Praxis bei sogenannten Sollbruchstellen zum Einsatz. Dabei muss die Grenzschicht bis zu einer bestimmten Belastungsintensität stabil bleiben bei höherer Belastung jedoch brechen. Zudem ist eine stabile Risspropagation entlang der Grenzschicht wichtig.Neben der Bruchstabilitätsbestimmung mit Hilfe des Double Cantilever Beam Tests wurden die beim Versagen der Grenzschicht entstandenen Defekte untersucht. Die Analyse der Bruchfläche erfolgte mit Mikroskopie und Höhenprofilometrie. Defekte im Volumen wurden durch Scanning-Ultra Small Angle X-ray Scattering und Scanning Microfokus-Small Angle X-ray Scattering untersucht.Im Modellsystem können Sollbruchstellen bis zu einer Belastungsintensität von maximal 280J/m² durch die Verschweißungsdauer eingestellt werden. Die Untersuchung der Bruchflächen lieferte ein kombiniertes Modell aus Ausheil- und Interdiffusionsprozess. Ferner folgt aus den Streuuntersuchungen, dass beim Modellsystem keine hochgeordneten Defektstrukturen vorliegen. Die entstandenen Strukturen folgen einem Modell diffuser Defektgrenzflächen. Über die gemessene Diffusivität kann zudem auf die Energiedissipation im Bereich um das Rissende geschlossen werden. Sie ist im unmittelbaren Rissbereich am Höchsten und nimmt mit Entfernung davon ab. Dabei haben die Defektbereiche eine Größe bis zu 650µm. Die Richtung der von außen angelegten Belastung spielt bei der räumlichen Orientierung der Defekte keine Rolle.

Radiation-induced defects in calcium fluoride and their influence on material properties under 193 nm laser irradiation

Calcium fluoride (CaF2) is one of the key lens materials in deep-ultraviolet microlithography because of its transparency at 193 nm and its nearly perfect optical isotropy. Its physical and chemical properties make it applicable for lens fabrication. The key feature of CaF2 is its extreme laser stability. rnAfter exposing CaF2 to 193 nm laser irradiation at high fluences, a loss in optical performance is observed, which is related to radiation-induced defect structures in the material. The initial rapid damage process is well understood as the formation of radiation-induced point defects, however, after a long irradiation time of up to 2 months, permanent damage of the crystals is observed. Based on experimental results, these permanent radiation-induced defect structures are identified as metallic Ca colloids.rnThe properties of point defects in CaF2 and their stabilization in the crystal bulk are calculated with density functional theory (DFT). Because the stabilization of the point defects and the formation of metallic Ca colloids are diffusion-driven processes, the diffusion coefficients for the vacancy (F center) and the interstitial (H center) in CaF2 are determined with the nudged elastic band method. The optical properties of Ca colloids in CaF2 are obtained from Mie-theory, and their formation energy is determined.rnBased on experimental observations and the theoretical description of radiation-induced point defects and defect structures, a diffusion-based model for laser-induced material damage in CaF2 is proposed, which also includes a mechanism for annealing of laser damage. rn

Woodgrain defect on tinned steel Flandres foil

Tin electrocoated steel strip, also referred to as Flandres foil, is largely used for manufacturing food containers. Tinplates must have good corrosion resistance, workability, weldability, as well as a bright appearance. The woodgrain defect, a not yet fully understood defect that occurs on tinplates and accounts for their high scrap rate, consists of alternate bands of bright/dull reflectivity and resembles longitudinally cut wood. Observations of the woodgrain defect by scanning electron microscopy showed that the molten tin spreads irregularly during both the melting and solidification stages. X-ray diffraction analyses showed that the metallic tin tended to crystallize in the (200) direction for coupons with and without the woodgrain defect. Nevertheless, the preferential orientation degree decreased for coupons with the woodgrain defect. The rocking curves, also known as omega-scan, showed that the tin grains were uniformly aligned parallel to the strip surface for coupons with no defects, whereas for tinplates with woodgrain, the tin grains were not uniformly oriented, probably due to the misalignment of the grains in relation to the surface. (C) 2011 Elsevier Inc. All rights reserved.

Inverse analysis FOR two-dimensional structures using the boundary element method

Inverse analysis is currently an important subject of study in several fields of science and engineering. The identification of physical and geometric parameters using experimental measurements is required in many applications. In this work a boundary element formulation to identify boundary and interface values as well as material properties is proposed. In particular the proposed formulation is dedicated to identifying material parameters when a cohesive crack model is assumed for 2D problems. A computer code is developed and implemented using the BEM multi-region technique and regularisation methods to perform the inverse analysis. Several examples are shown to demonstrate the efficiency of the proposed model. (C) 2010 Elsevier Ltd. All rights reserved,

Acellular Gellan-gum based bilayered structures for the regeneration of osteochondral defects: a preclinical study

 In orthopaedics, the management and treatment of osteochondral (OC) defects remains an ongoing clinical challenge. Autologous osteochondral mosaicplasty has been used as a valid option for OC treatments although donor site morbidity remains a source of concern [1]. Engineering a whole structure capable of mimicking different tissues (cartilage and subchondral bone) in an integrated manner could be a possible approach to regenerate OC defects. In our group we have been proposing the use of bilayered structures to regenerate osteochondral defects [2,3]. The present study aims to investigate the pre-clinical performance of bilayered hydrogels and spongy-like hydrogels in in vivo  models (mice and rabbit, respectively), in both subcutaneous and orthotopic models. The bilayered structures were produced from Low Acyl Gellan Gum (LAGG) from Sigma-Aldrich, USA. Cartilage-like layers were obtained from a 2wt% LAGG solution. The bone-like layers were made of 2wt% LAGG with incorporation of hydroxyapatite at 20% and 30% (w/v). Hydrogels and spongy-like were subcutaneouly implanted in mice to evaluate the inflammatory response. Then, OC defects were induced in rabbit knee to create a critical size defect (4 mm diameter and 5 mm depth), and then hydrogels and sponges implanted. Both structures followed different processing methods. The hydrogels were injected allowing in situ  crosslinking. Unlike, the spongy-like were pre-formed by freeze-drying. The studies concerning subcutaneous implantation and critical size OC defect were performed for 2 and 4 weeks time, respectively. Cellular behavior and inflammatory responses were assessed by means of histology staining and biochemical function and matrix deposition by immunohistochemistry. Additionally, both OC structures stability and new cartilage and bone formation were evaluated by using vivo- computed tomography (Scanco 80). The results showed no acute inflammatory response for both approaches. New tissue formation and integration in the adjacent tissues were also observed, which present different characteristic behaviors when comparing hydrogels and sponges response. As future insights, a novel strategy for regeneration of OC defects can be designed encompassing both, hydrogels and spongy-like structures and cellular approaches. References: 1. Espregueira-Mendes J. et al. Osteochondral transplantation using autografts from the upper tibio-fibular joint for the treatment of knee cartilage lesions. Knee Surgery, Sports Traumatology, Arthroscopy 20,1136, 2012. 2. Oliveira JM. et al, Novel hydroxyapatite/chitosan bilayered scaffold for osteochondral tissue-engineering applications: Scaffold design and its performance when seeded with goat bone marrow stromal cells. Biomaterials 27, 6123, 2006. 3. Pereira D R. et al. Gellan Gum-Based Hydrogel Bilayered Scaffolds for Osteochondral Tissue Engineering. Key Engineering Materials 587, 255, 2013.

Perinuclear Mlp proteins down-regulate gene expression in response to a defect in mRNA export

Résumé Une caractéristique des cellules eucaryotes est le confinement du matériel génétique (ADN/DNA) dans le noyau. Pour décoder cette information, un ARN messager (mRNA) est d'abord transcrit sous forme d'un ARN prémessager (pré-mRNA). Ce-dernier doit subir plusieurs étapes de maturation pour aboutir à une particule ribonucléoprotéique (mRNP) qui sera exportée vers le cytoplasme et traduite en protéine. La protéine de levure Mex67p et son homologue humain TAP sont des récepteurs d'export médiant la translocation du mRNP au travers des complexes du pore nucléaire (NPC). Mex67p/TAP ne se lient pas directement au mRNA, mais nécessitent la présence de protéines adaptatrices, telles que Yra1p et son homologue humain REF1. Afin d'identifier de nouveaux facteurs impliqués dans l'export des mRNPs ou de nouvelles fonctions pour Yra1p, nous avons effectué un crible génétique avec un mutant thermosensible de Yra1p, GFP-yra 1 -8. Ce mutant présente un défaut d'export des mRNAs et une diminution des niveaux de transcrits du gène rapporteur LacZ ainsi que de certains transcrits endogènes. Nous avons trouvé que la perte de Mlp2p, ou d'une protéine hautement similaire, Mlp1p, restaure la croissance du mutant GFP-yra1-8 à température restrictive. Mlp1p et Mlp2p sont des protéines nucléaires, dont l'homologue humain est TPR. Les Mlp (myosin¬like proteins) ainsi que TPR forment des structures filamenteuses ancrées aux NPC. Bien que la fonction des Mlp ne soit pas clairement définie, un rôle dans la biogenèse et la surveillance des mRNPs a été récemment proposé. Notre étude montre que la perte des Mlp, non seulement restaure la croissance de GFP-yra1-8, mais augmente aussi les niveaux des transcrits LacZ et facilite leur apparition dans le cytoplasme. Des expériences d'immunoprécipitations de la chromatine révèlent que Mlp2p diminue le taux de synthèse du transcrit LacZ dans GFP-yra1-8. Des analyses du transcriptome montrent que Mlp2p réduit aussi les niveaux d'une population de transcrits endogènes dans le mutant. Finalement, des localisations in situ suggèrent que la transcription du rapporteur LacZ a lieu à la périphérie du noyau, à proximité des Mlp. Ainsi, les protéines Mlp pourraient préférentiellement diminuer la transcription de gènes exprimés à la périphérie nucléaire. Nous montrons aussi que Yra1p interagit génétiquement avec Nab2p une protéine liée au mRNA et impliquée dans son export, mais non avec d'autres protéines également impliquées dans l'export des mRNAs. Les résultats obtenus soutiennent un modèle où les protéines Yra1p et Nab2p sont nécessaires à l'arrimage des mRNPs sur la plate-forme des Mlp. Si ces signaux manquent ou sont défectueux, les mRNPs ne peuvent pas poursuivre leur trajet vers le canal central du NPC. Ce bloc induirait par la suite une diminution de la transcription d'une population de gènes potentiellement localisée à la périphérie nucléaire. Dans son ensemble, cette étude suggère que les protéines Mlp établissent un lien entre la transcription de certains mRNAs et leur export au travers du pore nucléaire. Summary A hallmark of the eukaryotic cell is the packaging of DNA in the nucleus. To decode the genetic information, a messenger RNA (mRNA) is first synthesized as a pre-mRNA molecule, which undergoes different maturation steps resulting in an mRNP (messenger RNA ribonucleoprotein), which can be actively transported to the cytoplasm and translated into a protein. Yeast Mex67p and its human homologue TAP are export receptors mediating mRNP translocation through the nuclear pore complex (NPC). The recruitment of Mex67p/TAP to mRNA is mediated by mRNA export adaptors of the evolutionarily conserved REF (RNA and Export Factor binding) family: yeast Yra1p and human REF1. To uncover new functions of Yra1p or new factors implicated in mRNA export, we performed a genetic screen with a themiosensitive (ts) yra1 mutant, GFP-yra1-8. This mutant exhibits mRNA export defects and a decrease in the levels of LacZ reporter and certain endogenous transcripts. We found that the loss of Mlp2p, or the related Mlp1p protein, substantially rescues the growth defect of the GFP-yra1 -8 mutant. Mlp1p and M1p2p are large non-essential proteins, homologous to human TPR, proposed to form intra-nuclear filamentous structures anchored at the NPC. Their role is not clearly defined, but they have been implicated in mRNP biogenesis and surveillance. Our study shows that loss of Mlp proteins not only restores growth of GFP-yra1-8, but also rescues LacZ mRNA levels and increases their appearance in the cytoplasm. Chromatin immunoprecipitation and pulse chase experiments indicate that Mlp2p down-regulates LacZ mRNA synthesis in GFP-yra1-8. DNA micro- array analyses reveal that Mlp2p also reduces the levels of a subset of cellular transcripts in the yra1 mutant strain. In situ localizations suggest that LacZ transcription occurs at the nuclear periphery, in close proximity to Mlp proteins. Thus, Mlp proteins may preferentially down-regulate genes expressed at the nuclear periphery. Finally, we show that Yra1p genetically interacts with the shuttling mRNA-binding protein Nab2p and that loss of Mlp proteins rescues the growth defect of yra1 and nab2, but not other mRNA export mutants. The data support a model in which Nab2p and Yra1p are required for rnRNP docking to the Mlp platform. Lack of these signals prevents mRNPs from crossing the Mlp gate. This block may then negatively feed-back on the transcription of a subset of genes, potentially located at the nuclear envelope. Overall, this study suggests that perinuclear Mlp proteins establish a link between mRNA transcription and export.

Development of Craniofacial Bone Defect Reconstruction Implant Based on Fibre-Reinforced Composite with Photopolymerisable Resin Systems. Experimental studies in vitro and in vivo.

Reconstruction of defects in the craniomaxillofacial (CMF) area has mainly been based on bone grafts or metallic fixing plates and screws. Particularly in the case of large calvarial and/or craniofacial defects caused by trauma, tumours or congenital malformations, there is a need for reliable reconstruction biomaterials, because bone grafts or metallic fixing systems do not completely fulfill the criteria for the best possible reconstruction methods in these complicated cases. In this series of studies, the usability of fibre-reinforced composite (FRC) was studied as a biostable, nonmetallic alternative material for reconstructing artificially created bone defects in frontal and calvarial areas of rabbits. The experimental part of this work describes the different stages of the product development process from the first in vitro tests with resin-impregnated fibrereinforced composites to the in vivo animal studies, in which this FRC was tested as an implant material for reconstructing different size bone defects in rabbit frontal and calvarial areas. In the first in vitro study, the FRC was polymerised in contact with bone or blood in the laboratory. The polymerised FRC samples were then incubated in water, which was analysed for residual monomer content by using high performance liquid chromatography (HPLC). It was found that this in vitro polymerisation in contact with bone and blood did not markedly increase the residual monomer leaching from the FRC. In the second in vitro study, different adhesive systems were tested in fixing the implant to bone surface. This was done to find an alternative implant fixing system to screws and pins. On the basis of this study, it was found that the surface of the calvarial bone needed both mechanical and chemical treatments before the resinimpregnated FRC could be properly fixed onto it. In three animal studies performed with rabbit frontal bone defects and critical size calvarial bone defect models, biological responses to the FRC implants were evaluated. On the basis of theseevaluations, it can be concluded that the FRC, based on E-glass (electrical glass) fibres forming a porous fibre veil enables the ingrowth of connective tissues to the inner structures of the material, as well as the bone formation and mineralization inside the fibre veil. Bone formation could be enhanced by using bioactive glass granules fixed to the FRC implants. FRC-implanted bone defects healed partly; no total healing of defects was achieved. Biological responses during the follow-up time, at a maximum of 12 weeks, to resin-impregnated composite implant seemed to depend on the polymerization time of the resin matrix of the FRC. Both of the studied resin systems used in the FRC were photopolymerised and the heat-induced postpolymerisation was used additionally.