Composition and crystal parameters of carbonate-apatites from animal teeth and bones and from phosphate rocks of the ocean bottom

Samples of recent to Miocene fish and marine mammal bones from the bottom of the Atlantic and Pacific Oceans and Miocene Maikop deposits (Transcaspian region) are studied by X-ray diffraction technique combined with chemical and energy-dispersive analyses. Changes of lattice parameters and chemical composition of bioapatite during fossilization and diagenesis suggest that development of skeletal apatite proceeds from dahllite-type hydroxyapatite to francolite-type carbonate-fluorapatite. It is assumed that jump-type transition from dahllite to francolite during initial fossilization reflects replacement of biogeochemical reactions in living organisms, which are subject to nonlinear laws of nonequilibrium thermodynamics, by physicochemical processes according to the linear equilibrium thermodynamics.

XAS characterization of the RuO(2)-Ta(2)O(5) system local (crystal) structure

The influence of the preparation method on the structural properties of the RuO(2)-Ta(2)O(5) system was investigated. Both thin films on Ti substrates and powder samples of nominal composition Ti/RuO(2)-Ta(2)O(5) (Ru:Ta = 100:0, 90:10, 80:20, 30:70, and 0:100 at.%) were prepared through thermal decomposition of polymeric precursors (DPP). The thin films and powder samples were investigated using X-ray absorption spectroscopy (XAS). XANES analyses showed that Ru and Ta are present in the Ru(IV) and Ta(V) oxidation states. EXAFS signals of all the samples were analyzed, to obtain the average bond length (r), coordination number, and the Debye-Waller factor (sigma(2)) for each Ru-O, Ru-Ru, Ta-O nearest-neighbor. The first shell Ru-O distance was found at 1.91-1.92 angstrom with coordination number of 1.8-2.1, and at 2.01-2.02 angstrom with coordination number of 3.9-4.1. The Ta-O distance obtained for all the samples and in both modes (transmission and fluorescence) had significantly different values from the theoretical ones. The results revealed that the local structure around both the Ru and Ta sites are similar, and that they consist of distorted M-O(6) octahedra (where M = Ru or Ta). (C) 2010 Elsevier B.V. All rights reserved.

Kinetics of crystal growth and equilibrium domains in eclogite of the Sesia Zone, Western Alps

Kinetics of crystal growth and equilibrium domains in eclogite of the Sesia Zone, Western Alps Darbellay Bastien Institut de Minéralogie et Géochimie Résumé grand public Comme toute matière, la roche est sensible à son environnement et cherche à s'adapter pour acquérir un état stable (état d'équilibre). Les changements des conditions physiques (température et pression) vont ainsi impliquer des modifications dans la roche. Le métamorphisme est l'étude de ces changements. Les minéraux qui constituent la roche peuvent modifier, leur structure, leur chimie ou être remplacer par d'autres minéraux plus stables. Il est ainsi crucial de déterminer les processus responsables et limitant de la croissance minérale. Trois processus permettent la croissance ; (1) la dissolution des éléments du réactant, (2) le transport de ces éléments vers le site de croissance, (3) l'incorporation de ces éléments dans la nouvelle structure. Cette thèse se focalise sur les structures des minéraux de haute pression (forme, zonation chimique, structure interne) pour essayer de déterminer les facteurs importants à l'origine de leur état final. Les zones d'étude se situent dans la zone de Sésia. La première partie traite de la problématique liée à l'incorporation d'un élément dans une structure minérale. A l'image de la croissance humaine, les irrégularités minéralogiques permettent de mettre en lumière un dysfonctionnement de la croissance due à un excès ou à une carence d'un élément. Bien dosé, cet élément est cependant essentiel à la croissance. Les zoisites (épidotes) des métabasites de la région de Cima di Bonze montrent une zonation chimique en sablier. Dans cette zonation la teneur en fer excède la capacité maximum que peut contenir la structure orthorhombique de la zoisite. Des défauts de structure permettent l'accommodation de cet excès. La zoisite peut ainsi adapter sa structure pour permettre l'incorporation d'une relativement grande quantité de fer. Les études précédentes montraient, pour des conditions similaires, la formation de deux épidotes distinctes. La deuxième partie se penche sur la compétition entre le minéral qui fait sa croissance et les minéraux (réactants) qui l'entourent. Les métapélites de la région du Monte Mucrone contiennent des grenats atollaires. Des études détaillées de la texture et de la zonation chimique du grenat ainsi qu'une modélisation thermodynamique ont permis de mieux cerner les facteurs importants responsables de la forme atollaire. Cette structure est obtenue par un changement du comportement de la croissance du grenat le long d'un chemin P-T hercynien. Dans un premier stade, le grenat croît rapidement et consume peu le quartz de la matrice. La croissance se fait ainsi le long des jointures des grains de quartz. Dans un second temps, les changements de conditions PT donnent une croissance lente du grenat et une forte consommation du quartz. Le grenat peut ainsi développer sa forme dodécaédrale classique. La troisième partie s'intéresse aux distances de transport par diffusion d'un élément (ici l'argon) durant la haute pression. Pour ce faire, un profile d'âges 40Ar/39Ar sur biotite a été mesuré depuis un veine de haute pression riche en argon jusque dans son encaissant (granitoïd du Monte Mucrone). Le profile montre une répartition des âges suivant une courbe de diffusion. Le transport se fait sur une longueur de deux centimètre avec l'aide d'un fluide. Il est réduit à une échelle millimétrique quand la phase fluide disparaît. Cette étude montre ainsi les difficultés de transport des éléments durant la haute pression ne permettant pas un rééquilibrage de la roche à grande échelle. Kinetics of crystal growth and equilibrium domains in eclogite of the Sesia Zone, Western Alps Darbellay Bastien Institut de Minéralogie et Géochimie Résumé de thèse Les processus de croissance (diffusion des éléments et les réactions d'interface) et les conditions dans lesquelles les minéraux grandissent (température, pression, fluide, composition chimique de la roche), déterminent la texture ainsi que la zonation des minéraux. Cette thèse se focalise, par le biais de textures peu communes, sur trois différents processus impliqués dans la croissance minérale à haute pression (Zone de Sésia, Alpes de l'Ouest, Italie). L'incorporation d'un élément dans une structure minérale ne peut se faire que dans des sites en accord avec la taille et la charge ionique de l'élément. De plus, la balance de charge doit être maintenue dans le minéral. La régularité de la structure cristalline fixe ainsi une limite maximum de concentration d'un élément donné. Les zoisites provenant des métabasites de la région de Cima di Bonze montrent des zonations en sablier caractérisées par une concentration anormale en fer. La zonation se marque par une différente teinte de biréfringence et par un plus grand angle d'extinction que le reste de la zoisite. Une inter-croissance de clinozoisite à l'intérieur de la structure orthorhombique de la zoisite peut ainsi être suspectée. Les analyses XRD (diffraction des rayons x) ainsi que les analyses Raman ne confirment pas cette suspicion. Seules les analyses TEM (microscope à électrons transmis) montrent des défauts de structure pouvant être interprétés comme des modules de clinozoisite. Ils ne peuvent cependant pas être considérés comme une phase thermodynamique. Un nouveau trou d'immiscibilité entre deux zoisite (X ep= 0.1 and Xep = 0.15) a ainsi pu être établi. Dans les métapélites la région du Monte Mucrone, des grenats fortement zonés montrent une évolution texturale singulière. Ils présentent une forme initiale de `champignon' qui se développe pour former une structure atollaire finale. L'étude conjuguée de la structure 3D et des zonations, ainsi que l'établissement d'un model thermodynamique, indiquent que ces structures proviennent de deux épisodes de croissances : (1) La croissance du grenat durant un chemin prograde hercynien (de 525 °C et 6.2 kbar à 640 °C et 9 kbar) permet la formation des textures atollaires. Elles sont le résultat d'une croissance poecilitique initiale suivie d'une croissance idiomorphique du grenat. (2) La structure est rendue plus complexe par la cristallisation d'un grenat homogène tout autour ainsi qu'à l'intérieur du grenat hercynien durant la haute pression alpine (550 °C and 20 kbar). L'arrivée de l'eau durant la haute pression facilite le transport d'éléments et permet une cristallisation rapide du grenat. La diffusion peut être un facteur limitant de la croissance minéralogique. Elle a aussi une grande importance pour la géochronologie. Une veine de haute pression à l'intérieur du granitoïde du Monte Mucrone a été étudiée dans le but de déterminer la distance de diffusion de l'argon. Le profile d'âges 40Ar/39Ar sur biotites, établi de la veine vers le métagranitoïde, suit une courbe de diffusion. Les âges sont élevés proche de la veine (800 Ma) puis décroissent jusqu'à des âges homogènes (170-150 Ma) à deux centimètres de la veine. La présence de fluide, marqué par de hautes concentrations en chlore, permet une diffusion centimétrique. Cependant, la distance est réduite à une échelle millimétrique quand le fluide est absent. Les très faibles distances de diffusion préservent les âges pré-alpins et impliquent un événement géologique pour les âges de 170-150 Ma. Kinetics of crystal growth and equilibrium domains in eclogite of the Sesia Zone, Western Alps Darbellay Bastien Institut de Minéralogie et Géochimie Thesis abstract Rock textures and zonings are the consequence of growth processes (element diffusion and interface reaction) steered by the environment in which they grew (pressure, differential stress, temperature, fluid and rock composition). The thesis presented here focuses on three different topics, each of it dealing with aspects of mineral growth processes during subduction, in a high-pressure environment. All studies were conducted in the Sesia Zone of the Western European Alps, Italy. The first study addresses the crystallography and geochemistry of element incorporation in zoisite, one of the major hydrous minerals found in subduction zone rocks. Elements can be incorporated into a mineral structure only on crystallographic sites that offer enough space for the ion and the overall charge balance has to be maintained. Element concentrations are hence limited. Incorporation of some elements produces complex zoning, including hourglass like patterns, which are the focus of the first contribution. Zoisites from Cima di Bonze (Sesia Zone) show spectacular hourglass zoning defined by Fe-content variations. The hourglass zones have a distinct birefringence and a different extinction angle than the regular part of the zoisite. We show by detailed XRD (X-ray diffraction) and confocal Raman analyses that the high Fe-zones are nevertheless zoisite, and not clinozoisite as one might expect. High resolution TEM (transmission electron microscopy) analyses show planar defects on (100) that can be interpreted as small-scale clinozoisite modules. However, these clinozoisites cannot be interpreted as a distinctive thermodynamic phase and the entire mineral has to be considered as zoisite. The miscibility gap between two zoisites (Xep = 0.1 and Xep = 0.15) can be then definite at 550 ± 50°C and 14 to 20 Kbar. Strongly zoned garnets in quartz rich metapelite from the Monte Mucrone area (Sesia Zone) show evolution form 3D mushroom to atoll structure. The second contribution presents textural investigations, garnet zoning and thermodynamic modeling that demonstrate that atoll garnets are the result of two distinctive growth events. (1) Garnet atoll structure is already formed during a prograde Hercynian path from 525 °C and 6.2 kbar to 640 °C and 9 kbar. It results in an initial poikilitic growth followed by a final idiomorphic growth event. (2) Alpine HP garnet are homogenous (550 °C and 20 kbar) and grew around and also inside the Hercynian garnet. Lack of prograde Alpine garnet and fast growth of the HP garnet is explained by the absence of water during much of the prograde path. Water saturation was only observed towards the end, close towards the peak metamorphic conditions. Diffusion could be a limiting factor for crystal growth. It has also a great importance in geochronology. HP vein inside the metagranitoide of the Monte Mucrone (~300 Ma) was investigated to determine argon diffusion scales during high-pressure metamorphism. 40Ar/39Ar biotite ages profile from the vein toward the metagranodiorite show a diffusion curve: old ages (800 Ma) located close to the vein decrease until homogenous 170-150 Ma ages are obtained, two centimeter away from the vein. Centimeter-scale diffusion occurs with help of a fluid phase marked by high chlorine concentrations. Argon diffusion is reduced to a millimeter scale when free fluid is absent. Very short diffusion distance permits to preserve pre-Alpine ages. The 170-150 Ma ages are considered to be geologic meaningful, probably resulting from the extensional tectonics linked to opening of the Tethian ocean.

The carbon isotope composition of natural SiC (moissanite) from the Earth's mantle: New discoveries from ophiolites

Moissanite (natural SiC) has been recovered from podiform chromitites of several ophiolite complexes, including the Luobusa and Donqiao ophiolites in Tibet, the Semail ophiolite in Oman and the United Arab Emirates, and the Ray-Iz ophiolite of the Polar Urals, Russia. Taking these new occurrences with the numerous earlier reports of moissanite in diamondiferous kimberlites leads to the conclusion that natural SiC is a widespread mineral in the Earth's mantle, which implies at least locally extremely low redox conditions. The ophiolite moissanite grains are mostly fragments (20 to 150 mu m) with one or more crystal faces, but some euhedral hexagonal grains have also been recovered. Twinned crystals are common in chromitites from the Luobusa ophiolite. The moissanite is rarely colorless, more commonly light bluish-gray to blue or green. Many grains contain inclusions of native Si and Fe-Si alloys (FeSi(2), Fe(3)Si(7)). Secondary ion mass spectrometric (SIMS) analysis shows that the ophiolite-hosted moissanite has a distinctive (13)C-depleted isotopic composition (delta(13)C from -18 to -35 parts per thousand, n=36), much lighter than the main carbon reservoir in the upper mantle (delta(13)C near -5 parts per thousand). The compiled data from moissanite from kimberlites and other mantle settings share the characteristic of strongly (13)C-depleted isotopic composition. This suggests that moissanite originates from a separate carbon reservoir in the mantle or that its formation involved strong isotopic fractionation. The degree of fractionation needed to produce the observed moissanite compositions from the main C-reservoir would be unrealistically large at the high temperatures required for moissanite formation. Subduction of biogenic carbonaceous material could potentially satisfy both the unusual isotopic and redox constraints on moissanite formation, but this material would need to stay chemically isolated from the upper mantle until it reached the high-T stability field of moissanite. The origin of moissanite in the mantle is still unsolved, but all evidence from the upper mantle indicates that it cannot have formed there, barring special and local redox conditions. We suggest, alternatively, that moissanite may have formed in the lower mantle, where the existence of (13)C-depleted carbon is strongly supported by studies of extraterrestrial carbon (Mars, Moon, meteorites). (C) 2009 Elsevier B. V. All rights reserved.

Stable O and H isotopic composition of hydrous minerals as proxies for paleoclimate and -topography : application to the European Alps

The isotopie composition of clay minerals can be used to gain information on paleoaltitude, -topography and -climate during the time of their formation, as they form in isotopie equilibrium with ambient water, which has an isotopie composition that is determined by previous rain-out. In this thesis, the usability of this approach is evaluated for sample material from both the North Alpine Foreland Basin and internal parts of the European Alps. The isotopie composition of precipitation is determined by the air temperature and the extent of previous rain-out, which in turn is affected by the distance to the point of origin of the water vapor and the condensation conditions. An orographic barrier leads to uplift and adiabatic cooling of air masses and thereby enhances rainfall with a characteristic depletion in heavy 0 and H isotopes. Processes such as evaporation and mixing of water with different origin affect the isotopie composition further on the surface. Clay minerals are hydrous phyllosilicates that can form during weathering or pedogenesis in isotopie equilibrium with the present water and inherit its isotopie composition with a characteristic fractionation. If their isotopie composition was preserved after formation and the necessary parameters are known, it is possible to calculate the isotopie composition of the ambient water and thereby reconstruct climatic and topographic conditions during their formation. Due to the hygroscopic behavior of the sample material, analytical procedures needed to be modified to allow an analysis of the oxygen and hydrogen isotopie composition of the hydroxyl water built into their crystal structure and not the one of recently adsorbed water. In order to determine typical 5lsO and 8D values of meteoric water and minerals in the weathering environment in high Alpine regions, samples of surface water and soils from the valley of Visp in the Swiss Alps were studied that were collected along a transect with varying altitudes and host rock lithologies. The actual aim to attempt the reconstruction of Alpine paleoelevations was addressed by the analysis of sediments deposited under marine and terrestrial conditions during the Miocene and Oligocene, which were sampled from different locations in Switzerland, Germany and Austria. Further bentonite and fault gouge clay samples were used as reference material from low and high elevations. Results show that the isotopie composition of clay minerals can be influenced by several factors, such as the mode and site of their formation, possible isotope exchange (which is evident for 8D values), the samples' mineral composition (such as the presence of detrital material) and the deposition environment. With a consideration of these parameters and limitation to certain sample material, conclusions are drawn on the isotopie composition of the water from which the clay minerals formed. Most of the obtained values lie in the same range as has been reported in literature for foreland precipitation. The reconstruction of paleoelevation might be possible for selected sites with a geographical setting close to the Alpine chain or for intramontane basins. - La composition isotopique des argiles, qui se forment typiquement en contact avec des eaux superficielles, peut être utilisée pour obtenir des informations sur la paléoaltitude, la paléotopographie et le paléoclimat pendant leur création. La composition en isotopes stable (oxygène et hydrogène) des eaux de pluie est déterminée par l'altitude, la température, la distance depuis le lieu d'évaporation et par le taux de précipitation. Certains processus comme l'évaporation, l'interaction avec des minéraux et le mélange d'eaux d'origines variées peuvent aussi changer la composition des eaux de surface. Les argiles sont des pliyllosilicates hydratés qui sont crées par l'altération des roches au contact de ces eaux de surface et ils acquièrent une composition isotopique qui est soumise à un certain fractionnement. L'objectif de cette thèse est d'évaluer si l'effet de l'altitude des Alpes, est détectable dans la composition isotopique des sédiments du bassin d'avant-pavs pendant le Miocène. Après avoir établi la procédure analytique, des compositions isotopiques typiques de régions de hautes altitudes ont été determine sur les eaux de surfaces (rivières) et sur des échantillons de sols, le long d'une coupe dans la valée de Visp, dans les Alpes Suisses. Une reconstruction des paléoaltitudes Miocènes Alpines a ensuite été mené par l'analyse de sédiments marins et terrestres en utilisant des échantillons d'âges variés et provenant de Suisse, d'Allemagne et d'Autriche. Les résultats montrent que la composition isotopique des échantillons est impactée par de multiples facteurs, tels que le mode de et le lieu de formation. un possible échange isotopique tardif (surtout pour 5D). leur composition minéralogique et l'environnement de leur sédimentation. Après un examen prudent de ces paramètres, et en se limitant à un certain assortiment d'échatillons, on peut tirer des conclusions sur la composition isotopique des eaux originelles pour en déduire l'effet du climat et de la topographie.

Revisiting spatial distribution and biochemical composition of calcium-containing crystals in human osteoarthritic articular cartilage.

INTRODUCTION: Calcium-containing (CaC) crystals, including basic calcium phosphate (BCP) and calcium pyrophosphate dihydrate (CPP), are associated with destructive forms of osteoarthritis (OA). We assessed their distribution and biochemical and morphologic features in human knee OA cartilage. METHODS: We prospectively included 20 patients who underwent total knee replacement (TKR) for primary OA. CaC crystal characterization and identification involved Fourier-transform infra-red spectrometry and scanning electron microscopy of 8 to 10 cartilage zones of each knee, including medial and lateral femoral condyles and tibial plateaux and the intercondyle zone. Differential expression of genes involved in the mineralization process between cartilage with and without calcification was assessed in samples from 8 different patients by RT-PCR. Immunohistochemistry and histology studies were performed in 6 different patients. RESULTS: Mean (SEM) age and body mass index of patients at the time of TKR was 74.6 (1.7) years and 28.1 (1.6) kg/m², respectively. Preoperative X-rays showed joint calcifications (chondrocalcinosis) in 4 cases only. The medial femoro-tibial compartment was the most severely affected in all cases, and mean (SEM) Kellgren-Lawrence score was 3.8 (0.1). All 20 OA cartilages showed CaC crystals. The mineral content represented 7.7% (8.1%) of the cartilage weight. All patients showed BCP crystals, which were associated with CPP crystals for 8 joints. CaC crystals were present in all knee joint compartments and in a mean of 4.6 (1.7) of the 8 studied areas. Crystal content was similar between superficial and deep layers and between medial and femoral compartments. BCP samples showed spherical structures, typical of biological apatite, and CPP samples showed rod-shaped or cubic structures. The expression of several genes involved in mineralization, including human homolog of progressive ankylosis, plasma-cell-membrane glycoprotein 1 and tissue-nonspecific alkaline phosphatase, was upregulated in OA chondrocytes isolated from CaC crystal-containing cartilages. CONCLUSIONS: CaC crystal deposition is a widespread phenomenon in human OA articular cartilage involving the entire knee cartilage including macroscopically normal and less weight-bearing zones. Cartilage calcification is associated with altered expression of genes involved in the mineralisation process.

Equilibration and disequilibration between monazite and garnet: indication from phase-composition and quantitative texture analysis

The integration of information which can be gained from accessory [i.e. age (t)] and rock-forming minerals [i.e. temperature (T) and pressure (P)] requires a more profound understanding of the equilibration kinetics during metamorphic processes. This paper presents an approach comparing conventional P-T estimate from equilibrated assemblages of rock-forming minerals with temperature data derived from yttrium-garnet-monazite (YGM) and yttrium-garnet-xenotime (YGX) geothermometry. Such a comparison provides an initial indication on differences between equilibration of major and trace elements. Regarding this purpose, two migmatites, two polycyclic and one monocyclic gneiss from the Central Alps (Switzerland, northern Italy) were investigated. While the polycyclic samples exhibit trace-element equilibration between monazite and garnet grains assigned to the same metamorphic event, there are relics of monazite and garnet obviously surviving independent of their textural position. These observations suggest that surface processes dominate transport processes during equilibration of those samples. The monocyclic gneiss, on the contrary, displays rare isolated monazite with equilibration of all elements, despite comparably large transport distances. With a nearly linear crystal-size distribution of the garnet grain population, growth kinetics, related to the major elements, were likely surface-controlled in this sample. In contrast to these completely equilibrated examples, the migmatites indicate disequilibrium between garnet and monazite with a change in REE patterns on garnet transects. The cause for this disequilibrium may be related to a potential disequilibrium initiated by a changing bulk chemistry during melt segregation. While migmatite environments are expected to support high transport rates (i.e. high temperatures and melt presence), the evolution of equilibration in migmatites is additionaly related to change in chemistry. As a key finding, surface-controlled equilibration kinetics seem to dominate transport-controlled processes in the investigated samples. This may be decisive information towards the understanding of age data derived from monazite.

New High Permittivity and Low Loss Ceramics in the Bao-Ti02- Nb205 Composition

New dielectric ceramics with formula BaTi3Nb4, O„ and Ba6Til4Nbz039 have been prepared and characterized. BaTi3Nba017 was densified to 92% of TD after firing at 1310 oC for 4 h. However, Ba6Ti 1 4Nb2O39 fired under optimized conditions (1260 ` C for 4 h) showed only 85% TD together with secondary phase. The crystal system of both of the compositions is orthorhombic

The influence of viscous and latent heating on crystal-rich magma flow in a conduit

The flow dynamics of crystal-rich high-viscosity magma is likely to be strongly influenced by viscous and latent heat release. Viscous heating is observed to play an important role in the dynamics of fluids with temperature-dependent viscosities. The growth of microlite crystals and the accompanying release of latent heat should play a similar role in raising fluid temperatures. Earlier models of viscous heating in magmas have shown the potential for unstable (thermal runaway) flow as described by a Gruntfest number, using an Arrhenius temperature dependence for the viscosity, but have not considered crystal growth or latent heating. We present a theoretical model for magma flow in an axisymmetric conduit and consider both heating effects using Finite Element Method techniques. We consider a constant mass flux in a 1-D infinitesimal conduit segment with isothermal and adiabatic boundary conditions and Newtonian and non-Newtonian magma flow properties. We find that the growth of crystals acts to stabilize the flow field and make the magma less likely to experience a thermal runaway. The additional heating influences crystal growth and can counteract supercooling from degassing-induced crystallization and drive the residual melt composition back towards the liquidus temperature. We illustrate the models with results generated using parameters appropriate for the andesite lava dome-forming eruption at Soufriere Hills Volcano, Montserrat. These results emphasize the radial variability of the magma. Both viscous and latent heating effects are shown to be capable of playing a significant role in the eruption dynamics of Soufriere Hills Volcano. Latent heating is a factor in the top two kilometres of the conduit and may be responsible for relatively short-term (days) transients. Viscous heating is less restricted spatially, but because thermal runaway requires periods of hundreds of days to be achieved, the process is likely to be interrupted. Our models show that thermal evolution of the conduit walls could lead to an increase in the effective diameter of flow and an increase in flux at constant magma pressure.

The composition and crystallinity of the near-surface regions of weathered alkali feldspars

Our ability to identify thin non-stoichiometric and amorphous layers beneath mineral surfaces has been tested by undertaking X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) work on alkali feldspars from pH 1 dissolution experiments. The outcomes of this work were used to help interpret XPS and TEM results from alkali feldspars weathered for <10,000 years in soils overlying the Shap Granite (north-west England). The chemistry of effluent solutions indicates that silica-rich layers a few nanometers in thickness formed during the pH I experiments. These layers can be successfully identified by XPS and have lower Al/Si, Na/Si, K/Si and Ca/Si values than the outermost similar to 9 nm of unweathered controls. Development of Al-Si non-stoichiometry is coupled with loss of crystal structure to produce amorphous layers that are identifiable by TEM where >similar to 2.5 nm thick, whereas the crystallinity of albite is retained despite leaching of Na to depths of tens to hundreds on nanometers. Integration of XPS data over the outermost 6-9 nm of naturally weathered Shap feldspars shows that they have stoichiometric Al/Si and K/Si ratios, which is consistent with findings of previous TEM work on the same material that they lack amorphous layers. There is some XPS evidence for loss of K from the outermost couple of nanometers of Shap orthoclase, and the possibility of leaching of Na from albite to greater depths cannot be excluded using the XPS or TEM results. This study demonstrates that the leached layer model, as formulated from laboratory experiments, is inapplicable to the weathering of alkali feldspars within acidic soils, which is an essentially stoichiometric reaction. (C) 2008 Elsevier Ltd. All rights reserved.

Electro-optical properties of liquid crystal copolymers and their relationship to structural order

A range of side chain liquid crystal copolymers have been prepared using mesogenic and non-mesogenic units. It is found that high levels of the non-mesogenic moieties may be introduced without completely disrupting the organization of the liquid crystal phase. Incorporation of this comonomer causes a marked reduction in the glass transition temperature (Tg), presumably as a result of enhanced backbone mobility and a corresponding lowering of the nematic transition temperature, thereby restricting the temperature range for stability of the liquid crystal phase. The effect of the interactions between the various components of these side-chain polymers on their electro-optic responses is described. Infrared (i.r.) dichroism measurements have been made to determine the order parameters of the liquid crystalline side-chain polymers. By identifying a certain band (CN stretching) in the i.r. absorption spectrum, the order parameter of the mesogenic groups can be obtained. The temperature and composition dependence of the observed order parameter are related to the liquid crystal phase transitions and to the electro-optic response. It is found that the introduction of the non-mesogenic units into the polymer chain lowers the threshold voltage of the electro-optic response over and above that due to the reduction in the order parameter. The dynamic electro-optic responses are dominated by the temperature-dependent viscosity and evidence is presented for relaxation processes involving the polymer backbone which are on a time scale greater than that for the mesogenic side-chain units.

Major- and trace-element composition of olivine, perovskite, clinopyroxene, Cr-Fe-Ti oxides, phlogopite and host kamafugites and kimberlites, Alto Paranaiba, Brazil

An integrated whole-rock petrographic and geochemical study has been carried out on kamafugites and kimberlites of the Late Cretaceous Alto Paranaiba igneous province, in Brazil, and their main minerals, olivine, clinopyroxene, perovskite, phlogopite, spinels and ilmenite. Perovskite is by far the dominant repository for light lanthanides, Nb, Ta, Th and U, and occasionally other elements, reaching concentrations up to 3.4 x 10(4) chondrite values for light lanthanides and 105 chondrite for Th. A very strong fractionation between light and heavy lanthanides (chondrite-normalized La/Yb from similar to 175 to similar to 2000) is also observed. This is likely the first comprehensive dataset on natural perovskite. Clinopyroxene has variable trace-element contents. likely due to the different position of this phase in the crystallization sequence; Sc reaches values as high as 200 ppm whereas the lanthanides show very variable enrichment in light over heavy REE, and commonly show a negative Eu anomaly. The olivine, phlogopite (and tetra-ferriphlogopite), Cr-Ti oxide and ilmenite are substantially barren minerals for lanthanides and most other trace elements, with the exception of Ba, Cs and Rb in mica, and V, Nb and Ta in ilmenite. Estimated mineral/whole-rock partition coefficients for lanthanides in perovskite are similar to previous determinations, though much higher than those calculated in experiments with synthetic compositions, testifying once more to the complex behavior of these elements in a natural environment. The enormous potential for exploitation of lanthanides, Th, U and high-field-strength elements in the Brazilian kamafugites, kimberlites and related rocks is clearly shown.

Major- and trace-element composition of REE-rich turkestanite from peralkaline granites of the Morro Redondo Complex, Graciosa Province, south Brazil

Turkestanite, a rare Th- and REE-bearing cyclosilicate in the ekanite-steacyite group was found in evolved peralkaline granites from the Morro Redondo Complex, south Brazil. It occurs with quartz, alkali feldspar and an unnamed Y-bearing silicate. Electron microprobe analysis indicates relatively homogeneous compositions with maximum ThO(2), Na(2)O and K(2)O contents of 22.4%, 2.93% and 3.15 wt.%, respectively, and significant REE(2)O(3) abundances (5.21 to 11.04 wt.%). The REE patterns show enrichment of LREE over HREE, a strong negative Eu anomaly and positive Ce anomaly, the latter in the most transformed crystals. Laser ablation inductively coupled plasma mass spectrometry trace element patterns display considerable depletions in Nb, Zr, Hf, Ti and Li relative to whole-rock sample compositions. Observed compositional variations suggest the influence of coupled substitution mechanisms involving steacyite, a Na-dominant analogue of turkestanite, iraqite, a REE-bearing end-member in the ekanite-steacyite group, ekanite and some theoretical end-members. Turkestanite crystals were interpreted as having precipitated during post-magmatic stages in the presence of residual HFSE-rich fluids carrying Ca, the circulation of which was enhanced by deformational events.

Menezesite, the first natural heteropolyniobate, from Cajati, Sao Paulo, Brazil: Description and crystal structure

Menezesite, ideally Ba2MgZr4(BaNb12O42)center dot 12H(2)O, occurs as a vug mineral in the contact zone between dolomite carbonatite and ""jacupirangite"" (=a pyroxenite) at the Jacupiranga mine, in Cajati county, Sao Paulo state, Brazil, associated with dolomite, calcite, magnetite, clinohumite, phlogopite, ancylite-(Ce), strontianite, pyrite, and tochilinite. This is also the type locality for quintinite-2H. The mineral forms rhombododecahedra up to I mm, isolated or in aggregates. Menezesite is transparent and displays a vitreous luster; it is reddish brown with a white streak. It is non-fluorescent. Mohs hardness is about 4. Calculated density derived from the empirical formula is 4.181 g/cm(3). It is isotropic, 1.93(1) (white light); n(calc) = 2.034. Menezesite exhibits weak anomalous birefringence. The empirical formula is (Ba1.47K0.53Ca0.3,Ce0.17Nd0.10Na0.06La0.02)(Sigma 2.66)(Mg0.94Mn0.23Fe0.23Al0.03)(Sigma 1.43)(Zr2.75Ti0.96Th0.29)(Sigma 4.00)[(Ba0.72Th0.26U0.02)(Sigma 1.00)(Nb9.23Ti2.29Ta0.36Si0.12)Sigma O-12.00(42)]center dot 12H(2)O. The mineral is cubic, space group 10 (204), a = 13.017(1) angstrom, V = 2206(1) angstrom(3), Z = 2. Menezesite is isostructural with the synthetic compound Mg-7[MgW12O42](OH)(4)center dot 8H(2)O. The mineral was named in honor of Luiz Alberto Dias Menezes Filho (born 1950), mining engineer, mineral collector and merchant. Both the description and the name were approved by the CNMMN-IMA (Nomenclature Proposal 2005-023). Menezesite is the first natural heteropolyniobate. Heteropolyanions have been employed in a range of applications that include virus-binding inorganic drugs (including the AIDs virus), homogeneous and heterogeneous catalysts, electro-optic and electrochromic materials, metal and protein binding, and as building blocks for nanostructuring of materials.

Crystal structure and infrared analysis of a new trinuclear platinum(II) complex with L-cysteine

A new trinuclear platinum(II) complex with cysteine of composition [Pt(C3H6NO2S)Cl](3)center dot(C2H6SO)(3) was obtained and structurally characterized by X-ray diffraction and infrared analysis. The compound crystallizes in the trigonal system, space group R3, and is described in a hexagonal cell with a=17.739(1), c=9.531(1) and Z=3. Cysteine is coordinated to Pt(II) through the nitrogen and sulphur atoms. Each cysteine sulphur bridges between two metal atoms. A square planar coordination sphere of platinum is completed by a chlorine atom. The complex is soluble in dimethyl sulfoxide.