464 resultados para Chevon Carcasses
Resumo:
Male kids (110) from six goat genotypes, i.e. Boer x Angora (BA), Boer x Feral (1317), Boer x Saanen (BS), Feral x Feral (FF), Saanen x Angora (SA) and Saanen x Feral (SF) and two slaughter weight groups, i.e. Capretto and Chevon (liveweight at slaughter 14-22 and 30-35 kg, respectively) were compared for growth, carcass and meat quality characteristics. Due to their better growth rate, kids from BS and SF genotypes reached the required liveweight for slaughter earlier than kids from other Genotypes used in the study. Chevon kids had a significantly (P < 0.05) lower average daily gain (119 g per day) compared to Capretto kids (171 g per day). SA, SF and FF kids deposited more internal fat in comparison to kids from other genotypes. The dressing percentage of kids ranged from 51 to 54%, with significant differences between genotypes. BS and SF kids had longer carcasses. while BF kids had larger eye muscle area compared to other genotypes. Goat carcasses had a thin subcutaneous fat cover (1.6-2.2 mm). Genotype had a significant (P < 0.05) influence on cooking loss, pigment concentration and muscle colour parameters (CIE L*, a* and b* values). As denoted by the higher V and fibre optic probe values and lower subjective muscle score, the longissimus muscle colour was lighter for BS kids than other genotypes. Cooked meat from the BF kids had lower shear force values and better sensory scores compared to other genotypes. A significant (P < 0.05) decrease in muscle tenderness was observed from Capretto to Chevon carcasses, whereas cooked meat from these two slaughter weight groups was equally accepted (P > 0.05) by the panellists. (C) 2003 Elsevier Science B.V. All rights reserved.
Resumo:
The dissected carcass composition and fatty acid profiles of intermuscular fat from 110 male goat kids from six genotypes i.e. Boer x Angora (BA), Boer x Feral (BF), Boer x Saanen (BS), Feral x Feral (1717), Saanen x Angora (SA) and Saanen x Feral (SF) and two slaughter weight groups i.e. Capretto and Chevon (liveweight at slaughter 14-22 and 30-35 kg, respectively) were compared. Carcass tissue distribution for various genotypes was: muscle (63-66%), fat (10-13%) and bone (21-24%). Genotype significantly (P < 0.05) influenced the carcass composition; BA and FF carcasses had significantly higher muscle to bone ratio, while carcasses from BS kids were leaner compared to other genotypes. However, the two slaughter weight groups did not differ significantly (P > 0.05) in terms of carcass composition, when compared at the same carcass weight. In the present study, significant (P < 0.01) correlations were observed between percentage of muscle, fat and bone in most of the primal cuts and that in the carcass side. The main saturated fatty acids (SFAs) identified were palmitic (16:0) and stearic acid (18:0), while oleic acid (18: 1, omega9) was the main unsaturated fatty acid (UFA) in the intermuscular fat from goat kids. There were significant (P < 0.05) differences between genotypes in the proportions of individual fatty acids. Adipose tissue from BS kids had significantly higher UFAs (mainly oleic acid) and thus had a significantly lower melting point compared to other genotypes. There were significantly higher proportions of palmitic acid (35%) in the adipose tissue from Capretto kids compared to that from Chevon kids (22%). The concentration of UFAs increased in the adipose tissue from Capretto to Chevon carcasses. (C) 2003 Elsevier Science B.V. All rights reserved.
Resumo:
The bulk of the world's goat population is found in South-East Asia and Africa, where goats are the major source of meat production. Unfortunately, lack of an organized goat meat industry and marketing structure in developing countries is primarily responsible for their poor export earnings compared to those in developed countries such as Australia and New Zealand. Goat meat is leaner than meat from other domestic red meat species as well as being comparable in terms of its nutritional constituents. Furthermore, there are few, if any, religious or cultural taboos limiting the consumption of goat meat. Development of a carcass grading system and a suitable infrastructure in developing countries are some of the key requirements needed to establish a sustainable goat meat industry in the world. With an increase in demand by consumers for low-fat red meat alternatives, the future of the goat meat industry looks promising.
Resumo:
On Mho obesa F. (Diptera: Syrphidae) is usually neglected in forensic entomology, although adults are rather frequent on vertebrate carrion. In this study, conducted in southeastern Brazil in 2008, we used two pig carcasses, one killed by cocaine overdose and the other by shooting, to evaluate mainly the possible influences of the type of death on the larval development of O. obesa in the pig remains. We recorded the breeding of 218 adult specimens of this syrphid fly from the carcass killed by shooting, and none from the carcass killed by cocaine. These observations may open a new perspective for the use of O. obesa in forensic studies, considering its breeding preferences and its complete development on vertebrate carrion.
Resumo:
Multi-frequency bioimpedance analysis (MFBIA) was used to determine the impedance, reactance and resistance of 103 lamb carcasses (17.1-34.2 kg) immediately after slaughter and evisceration. Carcasses were halved, frozen and one half subsequently homogenized and analysed for water, crude protein and fat content. Three measures of carcass length were obtained. Diagonal length between the electrodes (right side biceps femoris to left side of neck) explained a greater proportion of the variance in water mass than did estimates of spinal length and was selected for use in the index L-2/Z to predict the mass of chemical components in the carcass. Use of impedance (Z) measured at the characteristic frequency (Z(c)) instead of 50 kHz (Z(50)) did not improve the power of the model to predict the mass of water, protein or fat in the carcass. While L-2/Z(50) explained a significant proportion of variation in the masses of body water (r(2) 0.64), protein (r(2) 0.34) and fat (r(2) 0.35), its inclusion in multi-variate indices offered small or no increases in predictive capacity when hot carcass weight (HCW) and a measure of rib fat-depth (GR) were present in the model. Optimized equations were able to account for 65-90 % of the variance observed in the weight of chemical components in the carcass. It is concluded that single frequency impedance data do not provide better prediction of carcass composition than can be obtained from measures of HCW and GR. Indices of intracellular water mass derived from impedance at zero frequency and the characteristic frequency explained a similar proportion of the variance in carcass protein mass as did the index L-2/Z(50).
Resumo:
272 isolates of Salmonella Enteritidis (111 isolated from frozen broiler chicken carcasses, 126 from human food and other biological materials involved in food poisoning outbreaks and 35 from different poultry materials) were selected for phage typing. From these, 111 were phage typed, 57.65% being classified as phage type 4, 32.43% as phage type 4a, 3.60% as phage type 6a and 0.90% as phage type 7, whereas 5.40% samples were not phage typeable. The predominance of phage type 4 is in agreement with the results published worldwide, and reinforces the need for studies related to the epidemiological meaning of these findings.
Resumo:
Salmonella spp. causes diseases in fowls, when species-specific serovars (Salmonella Pullorum and S.Gallinarum) are present in flocks, and public health problems, when non-typhoid serovars are isolated, as well as possible bacterial resistance induced by the preventive and therapeutic use of antimicrobials in animal production. This study describes the serovars and bacterial resistance of 280Salmonella spp. strains isolated from turkey and broiler carcasses in Southern Brazil between 2004 and 2006. SalmonellaEnteritidis was the most prevalent serovar (55.7%), followed by Heidelberg (5.0%), Agona (4.3%), Bredeney (3.9%), Hadar (3.2%), and Typhimurium (2.9%). Tennessee and S. Enterica subspecies enterica(O: 4.5) were isolated only in turkeys, and Hadar (18.6%) was the most prevalent serovar in this species. Antimicrobial susceptibility tests were performed in 178 isolates (43 from turkeys and 135 from broilers). All isolates were sensitive to amoxicillin + clavulanic acid, polymyxin B, ciprofloxacin, and norfloxacin, and were resistant to bacitracin and penicillin. Broiler carcass isolates showed resistance to nalidixic acid (48.9%), nitrofurantoin (34.3%), neomycin (9.6%), tetracycline (5.2%), and kanamycin (8.9%); and turkey carcass isolates were resistant to nalidixic acid (62.8%), tetracycline (34.9%), and neomycin (30.2%), with a significant difference in turkeys when compared to broiler carcass isolates. These results indicate the need for judicious use of antimicrobials in livestock production, given that the serovars identified are potential causes of food poisoning.
Resumo:
Lean meat percentage (LMP) is an important carcass quality parameter. The aim of this work is to obtain a calibration equation for the Computed Tomography (CT) scans with the Partial Least Square Regression (PLS) technique in order to predict the LMP of the carcass and the different cuts and to study and compare two different methodologies of the selection of the variables (Variable Importance for Projection — VIP- and Stepwise) to be included in the prediction equation. The error of prediction with cross-validation (RMSEPCV) of the LMP obtained with PLS and selection based on VIP value was 0.82% and for stepwise selection it was 0.83%. The prediction of the LMP scanning only the ham had a RMSEPCV of 0.97% and if the ham and the loin were scanned the RMSEPCV was 0.90%. Results indicate that for CT data both VIP and stepwise selection are good methods. Moreover the scanning of only the ham allowed us to obtain a good prediction of the LMP of the whole carcass.
Resumo:
Lean meat percentage (LMP) is the criterion for carcass classification and it must be measured on line objectively. The aim of this work was to compare the error of the prediction (RMSEP) of the LMP measured with the following different devices: Fat-O-Meat’er (FOM), UltraFOM (UFOM), AUTOFOM and -VCS2000. For this reason the same 99 carcasses were measured using all 4 apparatus and dissected according to the European Reference Method. Moreover a subsample of the carcasses (n=77) were fully scanned with a X-ray Computed Tomography equipment (CT). The RMSEP calculated with cross validation leave-one-out was lower for FOM and AUTOFOM (1.8% and 1.9%, respectively) and higher for UFOM and VCS2000 (2.3% for both devices). The error obtained with CT was the lowest (0.96%) in accordance with previous results, but CT cannot be used on line. It can be concluded that FOM and AUTOFOM presented better accuracy than UFOM and VCS2000.
Resumo:
Proteins for brood nutrition of social wasps are obtained from many prey, including insects (even bees and other wasps), spiders and bits of decaying meat. After being captured and killed, prey are reduced to a shapeless mass and distributed to the brood. Little is known about the foraging activity, especially on this group. Herein we describe the sequence of foraging behaviours of the social wasp Polybia (Trichothorax) ignobilis for hunting flies (Diptera: Calliphoridae and Muscidae) over pig carcasses. To our knowledge, there are few scientific descriptions of prey foraging behaviour on this species.
Resumo:
Considerable importance has been given to nest construction and larval food transport to the nest as a precondition for the eusociality of insects. Most adult hymenopterans feed on liquids, although bees and a few wasps may also feed on pollen. Carrion represents an additional source of protein for some species and they will scavenge for dead animals in the wild. This paper aims at analyzing Hymenoptera visitors on a pig carcass during the process of decomposition, in the summer of 2005 and the winter of 2006 in Brazil, and comparing the results with other studies in the Neotropical region. To our knowledge, this is the first study which described the occurence of Agelaia pallipes, Polybia paulista and Scaptotrigona depilis on decomposing carcasses in southeastern Brazil. It also raises the hypothesis of possible applications of Hymenoptera to achieve more precise PMI estimations, apart from other insects already known as having great importance in such estimates.
Resumo:
Sarcophagidae and Calliphoridae related to Rhinella schneideri (Anura, Bufonidae), Bothrops moojeni (Reptilia, Serpentes) and Mabuya frenata (Reptilia, Lacertilia) carcasses in Brasília, Brazil. This paper presents a list of necrophagous insects associated with small size carrions of two reptiles and one amphibian, found in areas of riparian forests and Cerrado sensu stricto physiognomies in a Conservation Unit located in Brasilia, Distrito Federal. We found seven species of insects related to these carcasses, being five Sarcophagidae, one Calliphoridae and one Braconidae parasitoid wasp. Lucilia eximia and Peckia (Pattonella) intermutans were the most abundant species in the study, corroborating with other studies that suggests that these species have specializations for colonization of small size animal carcasses.