A Research Roadmap for Complementary and Alternative Medicine – What We Need to Know by 2020

Background: The CAMbrella coordination action was funded within the Framework Programme 7. Its aim is to provide a research roadmap for clinical and epidemiological research for complementary and alternative medicine (CAM) that is appropriate for the health needs of European citizens and acceptable to their national research institutes and healthcare providers in both public and private sectors. One major issue in the European research agenda is the demographic change and its impact on health care. Our vision for 2020 is that there is an evidence base that enables European citizens to make informed decisions about CAM, both positive and negative. This roadmap proposes a strategic research agenda for the field of CAM designed to address future European health care challenges. This roadmap is based on the results of CAMbrella’s several work packages, literature reviews and expert discussions including a consensus meeting. Methods: We first conducted a systematic literature review on key issues in clinical and epidemiological research in CAM to identify the general concepts, methods and the strengths and weaknesses of current CAM research. These findings were discussed in a workshop (Castellaro, Italy, September 7–9th 2011) with international CAM experts and strategic and methodological recommendations were defined in order to improve the rigor and relevance of CAM research. These recommendations provide the basis for the research roadmap, which was subsequently discussed in a consensus conference (Järna, Sweden, May 9–11th 2012) with all CAMbrella members and the CAMbrella advisory board. The roadmap was revised after this discussion in CAMbrella Work Package (WP) 7 and finally approved by CAMbrella’s scientific steering committee on September 26th 2012. Results: Our main findings show that CAM is very heterogenous in terms of definitions and legal regulations between the European countries. In addition, citizens’ needs and attitudes towards CAM as well as the use and provision of CAM differ significantly between countries. In terms of research methodology, there was consensus that CAM researchers should make use of all the commonly accepted scientific research methods and employ those with utmost diligence combined in a mixed methods framework. Conclusions: We propose 6 core areas of research that should be investigated to achieve a robust knowledge base and to allow stakeholders to make informed decisions. These are: Research into the prevalence of CAM in Europe: Reviews show that we do not know enough about the circumstances in which CAM is used by Europeans. To enable a common European strategic approach, a clear picture of current use is of the utmost importance. Research into differences regarding citizens’ attitudes and needs towards CAM: Citizens are the driver for CAM utilization. Their needs and views on CAM are a key priority, and their interests must be investigated and addressed in future CAM research. Research into safety of CAM: Safety is a key issue for European citizens. CAM is considered safe, but reliable data is scarce although urgently needed in order to assess the risk and cost-benefit ratio of CAM. Research into the comparative effectiveness of CAM: Everybody needs to know in what situation CAM is a reasonable choice. Therefore, we recommend a clear emphasis on concurrent evaluation of the overall effectiveness of CAM as an additional or alternative treatment strategy in real-world settings. Research into effects of context and meaning: The impact of effects of context and meaning on the outcome of CAM treatments must be investigated; it is likely that they are significant. Research into different models of CAM health care integration: There are different models of CAM being integrated into conventional medicine throughout Europe, each with their respective strengths and limitations. These models should be described and concurrently evaluated; innovative models of CAM provision in health care systems should be one focus for CAM research. We also propose a methodological framework for CAM research. We consider that a framework of mixed methodological approaches is likely to yield the most useful information. In this model, all available research strategies including comparative effectiveness research utilising quantitative and qualitative methods should be considered to enable us to secure the greatest density of knowledge possible. Stakeholders, such as citizens, patients and providers, should be involved in every stage of developing the specific and relevant research questions, study design and the assurance of real-world relevance for the research. Furthermore, structural and sufficient financial support for research into CAM is needed to strengthen CAM research capacity if we wish to understand why it remains so popular within the EU. In order to consider employing CAM as part of the solution to the health care, health creation and self-care challenges we face by 2020, it is vital to obtain a robust picture of CAM use and reliable information about its cost, safety and effectiveness in real-world settings. We need to consider the availability, accessibility and affordability of CAM. We need to engage in research excellence and utilise comparative effectiveness approaches and mixed methods to obtain this data. Our recommendations are both strategic and methodological. They are presented for the consideration of researchers and funders while being designed to answer the important and implicit questions posed by EU citizens currently using CAM in apparently increasing numbers. We propose that the EU actively supports an EUwide strategic approach that facilitates the development of CAM research. This could be achieved in the first instance through funding a European CAM coordinating research office dedicated to foster systematic communication between EU governments, public, charitable and industry funders as well as researchers, citizens and other stakeholders. The aim of this office would be to coordinate research strategy developments and research funding opportunities, as well as to document and disseminate international research activities in this field. With the aim to develop sustainability as second step, a European Centre for CAM should be established that takes over the monitoring and further development of a coordinated research strategy for CAM, as well as it should have funds that can be awarded to foster high quality and robust independent research with a focus on citizens health needs and pan-European collaboration. We wish to establish a solid funding for CAM research to adequately inform health care and health creation decision-making throughout the EU. This centre would ensure that our vision of a common, strategic and scientifically rigorous approach to CAM research becomes our legacy and Europe’s reality. We are confident that our recommendations will serve these essential goals for EU citizens.

High prevalence but limited evidence in complementary and alternative medicine: guidelines for future research

The use of complementary and alternative Medicine (CAM) has increased over the past two decades in Europe. Nonetheless, research investigating the evidence to support its use remains limited. The CAMbrella project funded by the European Commission aimed to develop a strategic research agenda starting by systematically evaluating the state of CAM in the EU. CAMbrella involved 9 work packages covering issues such as the definition of CAM; its legal status, provision and use in the EU; and a synthesis of international research perspectives. Based on the work package reports, we developed a strategic and methodologically robust research roadmap based on expert workshops, a systematic Delphi-based process and a final consensus conference. The CAMbrella project suggests six core areas for research to examine the potential contribution of CAM to the health care challenges faced by the EU. These areas include evaluating the prevalence of CAM use in Europe; the EU cititzens’ needs and attitudes regarding CAM; the safety of CAM; the comparative effectiveness of CAM; the effects of meaning and context on CAM outcomes; and different models for integrating CAM into existing health care systems. CAM research should use methods generally accepted in the evaluation of health services, including comparative effectiveness studies and mixed-methods designs. A research strategy is urgently needed, ideally led by a European CAM coordinating research office dedicated to fostering systematic communication between EU governments, the public, charitable and industry funders, researchers and other stakeholders. A European Centre for CAM should also be established to monitor and further a coordinated research strategy with sufficient funds to commission and promote high quality, independent research focusing on the public’s health needs and pan-European collaboration. There is a disparity between highly prevalent use of CAM in Europe and solid knowledge about it. A strategic approach on CAM research should be established to investigate the identified gaps of knowledge and to address upcoming health care challenges.

Ethical issues in social research

There are numerous ethical issues that one must consider when developing a research project; however, much discussion about ethics in health research has focused on experimental studies such as clinical trials. As a result, there remains some ambiguity as to the ethical issues that need to be considered in health-related social research. This paper outlines a number of important ethical issues that CAM researchers should be aware of when developing, running and writing up social research. Maintaining high ethical standards is extremely important in social research as it protects participants and researchers, improves the quality of the data retrieved and ensures that future researchers will have access to participants within the community. (C) 2005 Elsevier Ltd. All rights reserved.

Monolithic CAD/CAM Lithium Disilicate Versus Veneered Y-TZP Crowns: Comparison of Failure Modes and Reliability After Fatigue

Purpose: The aim of this research was to evaluate the fatigue behavior and reliability of monolithic computer-aided design/computer-assisted manufacture (CAD/CAM) lithium disilicate and hand-layer-veneered zirconia all-ceramic crowns. Materials and Methods: A CAD-based mandibular molar crown preparation, fabricated using rapid prototyping, served as the master die. Fully anatomically shaped monolithic lithium disilicate crowns (IPS e.max CAD, n = 19) and hand-layer-veneered zirconia-based crowns (IPS e.max ZirCAD/Ceram, n = 21) were designed and milled using a CAD/CAM system. Crowns were cemented on aged dentinlike composite dies with resin cement. Crowns were exposed to mouth-motion fatigue by sliding a WC-indenter (r = 3.18 mm) 0.7 mm lingually down the distobuccal cusp using three different step-stress profiles until failure occurred. Failure was designated as a large chip or fracture through the crown. If no failures occurred at high loads (> 900 N), the test method was changed to staircase r ratio fatigue. Stress level probability curves and reliability were calculated. Results: Hand-layer-veneered zirconia crowns revealed veneer chipping and had a reliability of < 0.01 (0.03 to 0.00, two-sided 90% confidence bounds) for a mission of 100,000 cycles and a 200-N load. None of the fully anatomically shaped CAD/CAM-fabricated monolithic lithium disilicate crowns failed during step-stress mouth-motion fatigue (180,000 cycles, 900 N). CAD/CAM lithium disilicate crowns also survived r ratio fatigue (1,000,000 cycles, 100 to 1,000 N). There appears to be a threshold for damage/bulk fracture for the lithium disilicate ceramic in the range of 1,100 to 1,200 N. Conclusion: Based on present fatigue findings, the application of CAD/CAM lithium disilicate ceramic in a monolithic/fully anatomical configuration resulted in fatigue-resistant crowns, whereas hand-layer-veneered zirconia crowns revealed a high susceptibility to mouth-motion cyclic loading with early veneer failures. Int J Prosthodont 2010; 23: 434-442.

The effect of post-discharge educational intervention on patients in achieving objectives in modifiable risk factors six months after discharge following an episode of acute coronary syndrome, (CAM-2 Project): a randomized controlled trial

We investigated whether an intervention mainly consisting of a signed agreement between patient and physician on the objectives to be reached, improves reaching these secondary prevention objectives in modifiable cardiovascular risk factors six-months after discharge following an acute coronary syndrome. BACKGROUND: There is room to improve mid-term adherence to clinical guidelines' recommendations in coronary heart disease secondary prevention, specially non-pharmacological ones, often neglected. METHODS: In CAM-2, patients discharged after an acute coronary syndrome were randomly assigned to the intervention or the usual care group. The primary outcome was reaching therapeutic objectives in various secondary prevention variables: smoking, obesity, blood lipids, blood pressure control, exercise and taking of medication. RESULTS: 1757 patients were recruited in 64 hospitals and 1510 (762 in the intervention and 748 in the control group) attended the six-months follow-up visit. After adjustment for potentially important variables, there were, between the intervention and control group, differences in the mean reduction of body mass index (0.5 vs. 0.2; p < 0.001) and waist circumference (1.6 cm vs. 0.6 cm; p = 0.05), proportion of patients who exercise regularly and those with total cholesterol below 175 mg/dl (64.7% vs. 56.5%; p = 0.001). The reported intake of medications was high in both groups for all the drugs considered with no differences except for statins (98.1% vs. 95.9%; p = 0.029). CONCLUSIONS: At least in the short term, lifestyle changes among coronary heart disease patients are achievable by intensifying the responsibility of the patient himself by means of a simple and feasible intervention.

El camí a Europa: els serveis d'aprenentatge i recerca a les biblioteques de la UPC

The article shows how the library services of the Universitat Politècnica de Catalunya (UPC) manage change and explores the current opportunities available (university, electronic information, etc.) for converting the libraries into centres that actively support training and research at the university level. After providing information about the current university scenario, the article focuses on the road taken by the UPC libraries to overcome at both a conceptual and a practical level the major challenge of the millennium: transforming the traditional university library into a centre with resources for supporting academic teaching and research.

Seguiment de la diagnosi socioambiental del Camí de Cavalls: sector nord-est

El Camí de Cavalls és un element característic amb una importància històrica, cultural i recreativa considerable a Menorca. Aquesta illa va ser declarada Reserva de la Biosfera per l UNESCO l’any 1993; com a conseqüència, a l’any 2000 es va implantar el Pla Especial del Camí de Cavalls amb diversos objectius: definir les característiques del Camí i els seus instruments de gestió i aplicació; implantar mecanismes i normes que permetin l’ús públic que garanteixin la seva protecció i conservació; i finalment definir polítiques de sostenibilitat i conscienciació ambiental. Al llarg dels anys, la seva gestió ha permès que el Camí presenti una millora del seu estat de conservació i fer-ne un ús favorable a nivell socioambiental. L’any 2008 es va realitzar una diagnosi del Sector nord-est de la illa, aplicant-ne diversos indicadors per tal de determinar l’estat del Cam,í coincidint amb l’aplicació dels criteris plantejats pel Pla Especial del 2000 (Diagnosi Socioambiental del Camí de Cavalls de Menorca 2008). En aquest document s’explica la realització de la segona diagnosi, a partir del protocol dissenyat cinc anys abans, per tal de valorar l’estat actual del Camí i observar i definir les variacions que s’han produït en aquest període de temps. Els resultats mostren una tendència global positiva de millora del Camí, tal i com es planteja en la hipòtesis del projecte, tot i presentar-se una sèrie d’inconvenients a l’hora d’aplicar i valorar qualitativament els indicadors utilitzats. L’estudi s’ha realitzat amb la col·laboració dels centres de estudis ambientals de l’ICTA (Institut de Ciència i Tecnologia Ambientals) amb seu a la UAB (Universitat Autònoma de Barcelona), i l’OBSAM (Observatori Socioambiental de Menorca) amb seu a l’IME (Institut Menorquí d’Estudis).

Monitoimipystysorvin NC- ohjelmoinnin kehittäminen CAM käyttöönotolla

Diplomityön tavoitteena oli tehostaa venttiilipesien koneistuksessa käytettävän monitoimipystysorvin NC - ohjelmointia CAM - ohjelman käyttöönotolla. Tutkimus on osa laajempaa kokonaisuutta liittyen koneistusalihankinnan kehittämiseen ja yrityksen kilpailukyvyn ylläpitoon ja parantamiseen liiketoiminta-alueella, jolla on tällä hetkellä hyvät kasvunäkymät. Tavoite rajattiin yritykseen jo aiemmin hankitun WinCAM - ohjelman päivittämiseen ja hyödyntämiseen monitoimipystysorvin NC - ohjelmoinnissa. Tutkimuksen käytännön tavoitteena oli selvittää CAM - ohjelmoinnin käyttömahdollisuudet, sekä luoda CAM - ohjelmistoon pohjautuva, räätälöity NC - ohjelmointikonsepti pilottikohteeseen. Tutkimuksen kokeellisen osuuden muodostivat tällöin nykyisen tuotannon ongelmakohtien löytäminen, koneen ohjelmointitarpeiden kartoitus,sekä menetelmäkehitys. Tutkimuksen päämääränä oli tuotannon tasolla käytettävä järjestelmä, jolla koneen ohjelmointi olisi mahdollista myös vähemmällä konekohtaisella kokemuksella. Nykyisen toimintatavan ongelmina olivat yhtenäisen NC - ohjelmointikäytännön puute, niin valmiiden ohjelmien käytössä kuin uusienkin ohjelmien tekemisessä. Tähän olivat syynä NC - ohjauksen heikko käytettävyys erityisesti sorvauksen osalta. Nämä tekijät yhdistettynä monitoimityöstökoneessa tarvittavaan koordinaatiston hallintaan vaikeuttivat ohjelmointia. Työntekijäkohtaiset erot NC - ohjelmien käytössä, sekä laadultaan vaihtelevat valuaihiot aiheuttivat tuotannon läpäisyaikaan merkittävää vaihtelua. Siten myös koneen kuormituksen säätely oli vaikeaa. Uuden ohjelmointikonseptin toteutuksessa pidettiin etusijalla hyvää käytettävyyttä, sekä uuden menetelmän aukotonta liittymistä olemassa oleviin tuotantojärjestelmiin. Ohjelmointikonseptin toteutuksessa, osaperheestä haettiin selkeästi parametroitaviksi soveltuvat työvaiheet, jotka voitiin hallita yleiskäyttöisillä aliohjelmilla. Tuotteiden muidengeometrioiden hallintaan laadittiin geometriakirjasto, jota voitiin käyttää tavanomaisen graafisen ohjelmoinnin pohjana. Vanhaa toimintatapaa ja diplomityön aikana kehitettyä CAM - ohjelmointijärjestelmää vertailtiin perustuen NC - ohjelmien tehokkuuteen, jota tarkasteltiin saman työvaiheen työstöaikaan perustuen. Tämän lisäksi tärkeän tuloksen muodostavat myös kvalitatiivisetseikat, jotka liittyvät ohjelmointiympäristön käytettävyyteen. CAM - ohjelmoinnin kehittäminen ja käyttöönotto pilottikohteessa sujui pääosin hyvin ja laaditunsuunnitelman mukaisesti. Aiemmin hankalasti ohjelmoitavat työvaiheet, kuten erilaisten laippatasopintojen ja reikäpiirien ohjelmointi muutettiin makrokäyttöön soveltuviksi. Sorvauksessa ongelmia aiheuttaneen tiivistelilan koneistukseen sovellettiin graafista ohjelmointia. Koko tuotannon mittakaavassa NC - ohjelmoinninosuus oli kuitenkin vähäinen, mistä johtuen koneen tuottavuuteen ei tutkimuksenajanjaksolla voitu vaikuttaa. Sen sijaan tuotannon sujuvuuteen oleellisesti vaikuttavaa työtekijöiden 'hiljaisen tiedon' määrää voitiin vähentää vakioimalla ohjelmointia ja siirtämällä tehokkaiksi havaitut menetelmät ohjelmointijärjestelmään.

Comparative sequence analysis of the P-, M- and L-coding region of the measles virus CAM-70 live attenuated vaccine strain

Measles virus is a highly contagious agent which causes a major health problem in developing countries. The viral genomic RNA is single-stranded, nonsegmented and of negative polarity. Many live attenuated vaccines for measles virus have been developed using either the prototype Edmonston strain or other locally isolated measles strains. Despite the diverse geographic origins of the vaccine viruses and the different attenuation methods used, there was remarkable sequence similarity of H, F and N genes among all vaccine strains. CAM-70 is a Japanese measles attenuated vaccine strain widely used in Brazilian children and produced by Bio-Manguinhos since 1982. Previous studies have characterized this vaccine biologically and genomically. Nevertheless, only the F, H and N genes have been sequenced. In the present study we have sequenced the remaining P, M and L genes (approximately 1.6, 1.4 and 6.5 kb, respectively) to complete the genomic characterization of CAM-70 and to assess the extent of genetic relationship between CAM-70 and other current vaccines. These genes were amplified using long-range or standard RT-PCR techniques, and the cDNA was cloned and automatically sequenced using the dideoxy chain-termination method. The sequence analysis comparing previously sequenced genotype A strains with the CAM-70 Bio-Manguinhos strain showed a low divergence among them. However, the CAM-70 strains (CAM-70 Bio-Manguinhos and a recently sequenced CAM-70 submaster seed strain) were assigned to a specific group by phylogenetic analysis using the neighbor-joining method. Information about our product at the genomic level is important for monitoring vaccination campaigns and for future studies of measles virus attenuation.

Passividade na interface prótese/pilar intermediário de infraestrutura implantossuportadas confeccionadas pela tecnologia CAD/CAM e método convencional

The objective of this research was to evaluate the passivity and strain induced in infrastructures screwed on abutments, made by CAD/CAM technology, and to compare these samples with parts manufactured by conventional casting. Using CAD/CAM technology, 4 samples were made from zirconia (Zircad) and 4 samples were manufactured from cobaltchrome (CoCrcad). The control groups were 4 specimens of cobalt-chrome, made by onepiece casting (CoCrci), for a total of 12 infrastructures. To evaluate the passivity, the infraestructures were installed on the abutments. One end was tightened and the vertical gap between the infrastructure and the prosthetic abutment was measured with scanning electron microscopy (250×). The mean strain in these infrastructures was analyzed via the photoelasticity test. A significant difference (p = 0.000) in passivity was observed between the control (CoCrci) and sample groups (CoCrcad and CoCrci). CoCrcad exhibited the best value of passivity (48.76 ± 13.45 μm) and CoCrci the worst (187.55 ± 103.63 μm), Zircad presented an intermediate value (103.81 ± 43.15 μm). When compared to the other groups, CoCrci showed the highest mean strain around the implants (17.19 ± 7.22 kPa). It was concluded that the zirconia infrastructure made by CAD / CAM showed a higher vertical marginal misfit than those made in cobalt-chromium alloy with the same methodology, however, the tension generated in the implants was similar. The CAD/CAM technology is more accurate for passivity and mean strain of infrastructure screwed on abutments than conventional manufacturing techniques

The cam-type deformity of the proximal femur arises in childhood in response to vigorous sporting activity

The prevalence of a cam-type deformity in athletes and its association with vigorous sports activities during and after the growth period is unknown.

IMPROVING STARTABILITY AND REDUCING EMISSIONS IN FLEXFUEL SPARK IGNITION DIRECT INJECTION VARIABLE CAM TIMING ENGINE

Experimental work and analysis was done to investigate engine startup robustness and emissions of a flex-fuel spark ignition (SI) direct injection (DI) engine. The vaporization and other characteristics of ethanol fuel blends present a challenge at engine startup. Strategies to reduce the enrichment requirements for the first engine startup cycle and emissions for the second and third fired cycle at 25°C ± 1°C engine and intake air temperature were investigated. Research work was conducted on a single cylinder SIDI engine with gasoline and E85 fuels, to study the effect on first fired cycle of engine startup. Piston configurations that included a compression ratio change (11 vs 15.5) and piston geometry change (flattop vs bowl) were tested, along with changes in intake cam timing (95,110,125) and fuel pressure (0.4 MPa vs 3 MPa). The goal was to replicate the engine speed, manifold pressure, fuel pressure and testing temperature from an engine startup trace for investigating the first fired cycle for the engine. Results showed bowl piston was able to enable lower equivalence ratio engine starts with gasoline fuel, while also showing lower IMEP at the same equivalence ratio compared to flat top piston. With E85, bowl piston showed reduced IMEP as compression ratio increased at the same equivalence ratio. A preference for constant intake valve timing across fuels seemed to indicate that flattop piston might be a good flex-fuel piston. Significant improvements were seen with higher CR bowl piston with high fuel pressure starts, but showed no improvement with low fuel pressures. Simulation work was conducted to analyze initial three cycles of engine startup in GT-POWER for the same set of hardware used in the experimentations. A steady state validated model was modified for startup conditions. The results of which allowed an understanding of the relative residual levels and IMEP at the test points in the cam phasing space. This allowed selecting additional test points that enable use of higher residual levels, eliminating those with smaller trapped mass incapable of producing required IMEP for proper engine turnover. The second phase of experimental testing results for 2nd and 3rd startup cycle revealed both E10 and E85 prefer the same SOI of 240°bTDC at second and third startup cycle for the flat top piston and high injection pressures. E85 fuel optimal cam timing for startup showed that it tolerates more residuals compared to E10 fuel. Higher internal residuals drives down the Ø requirement for both fuels up to their combustion stability limit, this is thought to be direct benefit to vaporization due to increased cycle start temperature. Benefits are shown for an advance IMOP and retarded EMOP strategy at engine startup. Overall the amount of residuals preferred by an engine for E10 fuel at startup is thought to be constant across engine speed, thus could enable easier selection of optimized cam positions across the startup speeds.

Experimentally induced cam impingement in the sheep hip

Sheep hips have a natural non-spherical femoral head similar to a cam-type deformity in human beings. By performing an intertrochanteric varus osteotomy, cam-type femoro-acetabular impingement (FAI) during flexion can be created. We tested the hypotheses that macroscopic lesions of the articular cartilage and an increased Mankin score (MS) can be reproduced by an experimentally induced cam-type FAI in this ovine in vivo model. Furthermore, we hypothesized that the MS increases with longer ambulatory periods. Sixteen sheep underwent unilateral intertrochanteric varus osteotomy of the hip with the non-operated hip as a control. Four sheep were sacrificed after 14, 22, 30, and 38-weeks postoperatively. We evaluated macroscopic chondrolabral alterations, and recorded the MS, based on histochemical staining, for each ambulatory period. A significantly higher prevalence of macroscopic chondrolabral lesions was found in the impingement zone of the operated hips. The MS was significantly higher in the acetabular/femoral cartilage of the operated hips. Furthermore, these scores increased as the length of the ambulatory period increased. Cam-type FAI can be induced in an ovine in vivo model. Localized chondrolabral degeneration of the hip, similar to that seen in humans (Tannast et al., Clin Orthop Relat Res 2008; 466: 273-280; Beck et al., J Bone Joint Surg Br 2005; 87: 1012-1018), can be reproduced. This experimental sheep model can be used to study cam-type FAI.