Structural behaviour and design criteria of under-deck cable-stayed bridges subjected to seismic action

Under-deck cable-stayed bridges are very effective structural systems for which the strong contribution of the stay cables under live loading allows for the design of very slender decks for persistent and transient loading scenarios. Their behaviour when subjected to seismic excitation is investigated herein and a set of design criteria are presented that relate to the type and arrangement of bearings, the number and configuration of struts, and the transverse distribution of stay cables. The nonlinear behaviour of these bridges when subject to both near-field and far-field accelerograms has been thoroughly investigated through the use of incremental dynamic analyses. An intensity measure that reflects the pertinent contributions to response when several vibration modes are activated was proposed and is shown to be effective for the analysis of this structural type. The under-deck cable-stay system contributes in a very positive manner to reducing the response when the bridges are subject to very strong seismic excitation. For such scenarios, the reduction in the stiffness of the deck because of crack formation, when prestressed concrete decks are used, mobilises the cable system and enhances the overall performance of the system. Sets of natural accelerograms that are compliant with the prescriptions of Eurocode 8 were also applied to propose a set of design criteria for this bridge type in areas prone to earthquakes. Particular attention is given to outlining the optimal strategies for the deployment of bearings

Pushover analysis for the seismic response prediction of cable-stayed bridges under multi-directional excitation

Cable-stayed bridges represent nowadays key points in transport networks and their seismic behavior needs to be fully understood, even beyond the elastic range of materials. Both nonlinear dynamic (NL-RHA) and static (pushover) procedures are currently available to face this challenge, each with intrinsic advantages and disadvantages, and their applicability in the study of the nonlinear seismic behavior of cable-stayed bridges is discussed here. The seismic response of a large number of finite element models with different span lengths, tower shapes and class of foundation soil is obtained with different procedures and compared. Several features of the original Modal Pushover Analysis (MPA) are modified in light of cable-stayed bridge characteristics, furthermore, an extension of MPA and a new coupled pushover analysis (CNSP) are suggested to estimate the complex inelastic response of such outstanding structures subjected to multi-axial strong ground motions.

Discussion of "Bibliography and Data on Cable-Stayed Bridges", by the Subcommittee on Cable-Stayed Bridges of the Committee on Long-Span Steel Bridges of the Committee on Metals of the Structural Division (Oct., 1977)

The writer would like to point out the existence of a very remarkable Spanish cable-stayed bridge built in 1925, wich is thus older than the first one recorded by the authors (and probably the pioneer in concrete-deck type). The Tempul Aqueduct was designed by the famous Professor Educardo Torroja. The deck is a concrete box girder sustained by two planes of 3 mm diam 37-wire double cables working at 27 kg/mm2.

Cable-stayed bridges : a compilation of papers presented at Engineering Symposium, Cable-Stayed Bridges, Pasco, Washington, December 6-7, 1977 /

"June 1978."

Aerodynamic investigations of the Luling, Louisiana cable-stayed bridge /

Mode of access: Internet.

Aerodynamic stability of proposed Ohio River cable-stayed bridge /

Mode of access: Internet.

Measuring Dynamic Oscillations of a Small Span Cable-Stayed Footbridge: Case Study Using L1 GPS Receivers

Highly redundant or statically undetermined structures, such as a cable-stayed bridge, have been of particular concern to the engineering community nowadays because of the complex parameters that must be taken into account for healthy monitoring. The purpose of this study was to verify the reliability and practicability of using GPS to characterize dynamic oscillations of small span bridges. The test was carried out on a cable-stayed wood footbridge at Escola de Engenharia de Sao Carlos-Universidade de Sao Paulo, Brazil. Initially a static load trial was carried out to get an idea of the deck amplitude and oscillation frequency. After that, a calibration trial was carried out by applying a well known oscillation on the rover antenna to check the environment detectable limits for the method used. Finally, a dynamic load trial was carried out by using GPS and a displacement transducer to measure the deck oscillation. The displacement transducer was used just to confirm the results obtained by the GPS. The results have shown that the frequencies and amplitude displacements obtained by the GPS are in good agreement with the displacement transducer responses. GPS can be used as a reliable tool to characterize the dynamic behavior of large structures such as cable-stayed footbridges undergoing dynamic loads.

Decentralized model reference control of flexible cable-stayed beam structures

A decentralized model reference controller is designed to reduce the magnitude of the transversal vibration of a flexible cable-stayed beam structure induced by a seismic excitation. The controller design is made based on the principle of sliding mode such that a priori knowledge

Decentralized model reference control of flexible cable-stayed beam structures

A decentralized model reference controller is designed to reduce the magnitude of the transversal vibration of a flexible cable-stayed beam structure induced by a seismic excitation. The controller design is made based on the principle of sliding mode such that a priori knowledge

Modelação do viaduto do Corgo durante o ensaio de carga estático

Trabalho Final de Mestrado elaborado no Laboratório Nacional de Engenharia Civil (LNEC) para a obtenção do grau de Mestre em Engenharia Civil pelo Instituto Superior de Engenharia de Lisboa no âmbito do protocolo de cooperação entre o ISEL e o LNEC

Projeto de uma ponte atirantada rodoferroviária sobre o rio Lima, Viana do Castelo

Trabalho académico com o objetivo do autor desenvolver um estudo prévio e um projeto de uma travessia sobre o rio Lima, na cidade de Viana do Castelo constituída por uma ponte de tirantes rodoferroviária. O projeto académico visa, também, desenvolver e compreender: os conceitos básicos, as metodologias de conceção, e o funcionamento de estruturas desse género. O motivo principal da escolha do tema é a necessidade de uma alternativa à ponte Eiffel em Viana do Castelo, e juntando o facto de em Portugal não existir nenhuma obra de arte de tirantes rodoferroviária até ao presente, seria interessante estudar e projetar uma estrutura rodoferroviária de tirantes. Das diversas possibilidades de sistemas estruturais estudados, adotou-se uma ponte que acomodará 4 vias rodoviárias e 2 vias ferroviárias, com um desenvolvimento total de 660 metros, constituída por dois vãos laterais com 165 metros cada um, e com um vão central de 330 metros. A obra de arte será em semi-leque com dois planos de tirantes, ancorados a duas torres de betão em Y invertido de altura aproximadamente de 110 metros. O tabuleiro será duplo misto aço-betão, constituído por duas vigas trianguladas do tipo Warren, e por carlingas, afastadas entre si de 15 metros com secções tubulares metálicas de espessura variável. As carlingas ao nível superior suportam a laje de betão, que constitui a rodovia, e inferiormente, suportam outra laje de betão para a parte ferroviária. O trabalho inicia-se com o enquadramento conceptual geral da envolvente da obra de arte, seguidamente com apresentação da evolução histórica ao longo do tempo das pontes de tirantes, e à apresentação de algumas pontes rodoferroviárias de tirantes. É realizada uma análise preliminar, onde se estudam as restrições, as condicionantes, o local de implantação, e o sistema da configuração geométrica a adotar na conceção estrutural. São descritos todos os tipos de materiais, equipamentos a utilizar, bem como as suas características mecânicas necessárias para o cálculo estrutural. A quantificação das ações e das combinações de cálculo efetuaram-se de acordo com as normas em vigor nacionais e europeias, designadamente os Eurocódigos das várias especialidades e o Regulamento de Segurança e Ações para Estruturas de Edifícios e Pontes. Efetuou-se um pré-dimensionamento e uma otimização de vários sistemas estruturais possíveis de todos os elementos estruturais, tendo em conta variáveis de estudo como a economia e a resistência estrutural das secções, por forma a chegar à solução final. A estrutura foi discretizada e analisada num modelo estático tridimensional num programa de cálculo automático. A análise de resultados foi efetuada longitudinalmente para a verificação dos Estados Limites Últimos e Estados Limites de Utilização dos elementos estruturais que constituem a ponte. Foi ainda efetuada uma estimativa orçamental da ponte no rio Lima na cidade de Viana do Castelo.

Processos de construção e dimensionamento de pontes atirantadas

Na presente dissertação desenvolve-se o tema das pontes atirantadas. Apresentam-se várias formas de concepção estrutural, identificando os diversos elementos estruturais e as suas possíveis combinações. São também apresentadas as vantagens, desvantagens e aplicação de cada elemento estrutural na globalidade da estrutura. Os métodos construtivos foram também abordados, apresentando o faseamento construtivo, vantagens, desvantagens e condicionantes de cada processo para pilares, mastros e tabuleiros. Foi feito um estudo das várias acções regulamentares relevantes, para este tipo de estrutura, explicando para cada uma a sua metodologia de cálculo e a sua aplicação em cada elemento estrutural. A sua aplicação depende da estrutura em causa. Utilizando como caso de estudo uma ponte idealizada pelo Professor António Adão da Fonseca, que faz a ligação entre as cidades do Porto e Vila Nova de Gaia, foi feito um pré-dimensionamento de cada elemento estrutural, assim como o cálculo do pré-tensionamento dos tirantes. Em seguida foram elaboradas análises estáticas e dinâmicas através de um modelo numérico, considerando algumas das acções regulamentares estudadas anteriormente. Das análises foram extraídos valores de deslocamentos e esforços em cada elemento estrutural. Estes deslocamentos e esforços foram comparados entre várias combinações de acções e alternâncias de sobrecargas, procedendo-se no final a uma discussão dos resultados.

Überwachung der Vorspannkraft Externer Spannglieder mit Hilfe der Modalanalyse

Aufgrund ihrer Vorteile hinsichtlich Dauerhaftigkeit und Bauwerkssicherheit ist in Deutschland seit 1998 die externe Vorspannung in Hohlkastenbrücken zur Regelbauweise geworden. Durch Verwendung der austauschbaren externen Vorspannung verspricht man sich im Brückenbau weitere Verbesserungen der Robustheit und damit eine Verlängerung der Lebensdauer. Trotz des besseren Korrosionsschutzes im Vergleich zur internen Vorspannung mit Verbund sind Schäden nicht völlig auszuschließen. Um die Vorteile der externen Vorspannung zu nutzen, ist daher eine periodische Überwachung der Spanngliedkräfte, z. B. während der Hauptprüfung des Bauwerks, durchzuführen. Für die Überwachung der Spanngliedkräfte bei Schrägseilbrücken haben sich die Schwingungsmessmethoden als wirtschaftlich und leistungsfähig erwiesen. Für die Übertragung der Methode auf den Fall der externen Vorspannung, wo kürzere Schwingungslängen vorliegen, waren zusätzliche Untersuchungen hinsichtlich der effektiven Schwingungslänge, der Randbedingungen sowie der effektiven Biegesteifigkeit erforderlich. Im Rahmen der vorliegenden Arbeit wurde das Modellkorrekturverfahren, basierend auf der iterativen Anpassung eines F.E.-Modells an die identifizierten Eigenfrequenzen und Eigenformen des Spanngliedes, für die Bestimmung der Spanngliedkräfte verwendet. Dieses Verfahren ermöglicht die Berücksichtigung der Parameter (Schwingungslänge, Randbedingungen und effektive Biegesteifigkeit) bei der Identifikation der effektiven Spanngliedkräfte. Weiterhin ist eine Modellierung jeder beliebigen Spanngliedausbildung, z. B. bei unterschiedlichen Querschnitten in den Verankerungs- bzw. Umlenkbereichen, gewährleistet. Zur Anwendung bei der Ermittlung der Spanngliedkräfte wurde eine spezielle Methode, basierend auf den besonderen dynamischen Eigenschaften der Spannglieder, entwickelt, bei der die zuvor genannten Parameter innerhalb jedes Iterationsschrittes unabhängig korrigiert werden, was zur Robustheit des Identifikationsverfahrens beiträgt. Das entwickelte Verfahren ist in einem benutzerfreundlichen Programmsystem implementiert worden. Die erzielten Ergebnisse wurden mit dem allgemeinen Identifikationsprogramm UPDATE_g2 verglichen; dabei ist eine sehr gute Übereinstimmung festgestellt worden. Beim selbst entwickelten Verfahren wird die benötigte Rechenzeit auf ca. 30 % reduziert [100 sec à 30 sec]. Es bietet sich daher für die unmittelbare Auswertung vor Ort an. Die Parameteridentifikationsverfahren wurden an den Spanngliedern von insgesamt sechs Brücken (vier unterschiedliche Spannverfahren) angewendet. Die Anzahl der getesteten Spannglieder beträgt insgesamt 340. Die Abweichung zwischen den durch Schwingungs-messungen identifizierten und gemessenen (bei einer Brücke durch eine Abhebekontrolle) bzw. aufgebrachten Spanngliedkräften war kleiner als 3 %. Ferner wurden die Auswirkungen äußerer Einflüsse infolge Temperaturschwankungen und Verkehr bei den durchgeführten Messungen untersucht. Bei der praktischen Anwendung sind Besonderheiten aufgetreten, die durch die Verwendung des Modellkorrekturverfahrens weitgehend erfasst werden konnten. Zusammenfassend lässt sich sagen, dass die Verwendung dieses Verfahrens die Genauigkeit im Vergleich mit den bisherigen Schwingungsmessmethoden beachtlich erhöht. Ferner wird eine Erweiterung des Anwendungsbereiches auch auf Spezialfälle (z. B. bei einem unplanmäßigen Anliegen) gewährleistet.

Análisis teórico de la variación aleatoria de los esfuerzos de montaje de los cables en los puentes atirantados

Los puentes atirantados son una de las tipologías estructurales con mas desarrollo en los últimos años ya que cuentan con un ámbito de aplicación que se ha extendido en gran medida, llegando hasta el rango de luces de más de 1000 m. Por otra parte, para el caso de luces medias, este tipo de puentes aporta unas características resistentes y formales que los hacen muy adecuados en gran número de situaciones. Simultaneamente al importante número de realizaciones llevadas a cabo con esta tipología en los últimos años, se ha producido un gran desarrollo del conocimiento teórico de diferentes aspectos técnicos específicos de estos puentes, tanto a nivel de su comportamiento estructural como de la simulación y mejora de sus procesos constructivos. Estos desarrollos se han producido en gran parte gracias al avance en las capacidad de computación disponible hoy en día con los numerosos y cada vez más sofisticados programas comerciales de cálculo estructural, los cuales permiten la realización de análisis que hasta hace poco tiempo eran muy complicados de desarrollar. Una de las principales características de este tipo de estructuras, además de su elevado hiperestatismo, es la importancia del proceso constructivo, y en concreto del proceso de tesado de los cables, a la hora de conseguir alcanzar una situación final con la estructura en servicio que cumpla los requisitos establecidos a priori. Por este motivo se han llevado a cabo bastantes investigaciones orientadas a la optimización de los axiles a aplicar a los cables en el momento de su colocación y en su situación final. Parte de estos análisis se han centrado en particular en la posible influencia de ciertos parámetros geométricos y mecánicos aleatorios sobre los esfuerzos provocados sobre la estructura. Por otra parte, el propio comportamiento resistente de un tirante introduce ciertas incertidumbres en los formatos de seguridad asociados a los esfuerzos generados sobre ellos, en concreto en relación a la dependencia de estas fuerzas respecto de las cargas permanentes y a su consideración a nivel de coeficientes de seguridad asociados a dichas acciones. En vista de estos aspectos particulares se ha procedido a desarrollar la investigación que se expone a continuación, en la que se ha pretendido obtener un conocimiento adicional de algunos de estos aspectos para así poder contrastar la validez de las hipótesis que hoy en día son establecidas por la normativa vigente. De esta forma el planteamiento adoptado en esta tesis ha sido en primer lugar proponer un método novedoso de introducción de errores aleatorios sobre los esfuerzos o deformaciones de tesado de los cables, de tal manera que se pueda aplicar dicha técnica a distintas tipologías de puentes atirantados. Se pretende con ello conocer la influencia de dichos errores sobre el comportamiento de estas estructuras y valorar la magnitud de las desviaciones finalmente creadas respecto de la situación teórica. Una vez conocida la implicación que supone la aleatoriedad aplicada en la colocación de los tirantes, tanto cualitativa como cuantitativamente, se ha procedido a realizar un análisis de las consecuencias respecto de los formatos de seguridad que de estos datos se deducen. Señalar que esta tesis se ha centrado en el caso concreto de puentes atirantados construidos por voladizos sucesivos y con tableros de hormigón, dado el gran numero de puentes ejecutados con estas características, y con el objetivo de concentrar el estudio realizado en una tipología particular, pero de gran aplicación. Cable-stayed bridges represent one of the most developed structural typologies being used recently as it has a span range that can extend beyond 1000m. Furthermore, when it comes to bridges that span to a medium range we could say their shape and resistance are features that make this kind of bridge suitable for many different applications. Moreover, due to this type of bridge being used newly more extensively it has allowed for a better understanding of the theoretical knowledge of the various technical aspects both at a structural and simulation level in order to improve the constructions process of this type of bridge. Knowledge and development of these bridges can be attributed to the increasing apprehension of I.T. skills and the development of more advanced computer software with regards to structural calculations. The latter can aide more demanding analysis that was previously difficult to ascertain Defining features of this type of structure, besides its hyper static attributes, is the importance of the construction process, namely the cable tensioning process, which determines whether the requirements set out in the construction process will be met once the bridge is finished and traffic loads are applied. This is why much research has been conducted into the optimization of the axial forces to be applied to the cables. Focus, of part of this research, goes into the possible influences of random geometrical and mechanical parametres on the forces applied to the structure. We have therefore proceeded to develop research in which we have tried to gain more in depth knowledge which considers these aspects so that we can validate the hypothesis which are currently established in the regulations Firstly, the purpose of this thesis is to provide a new method to introduce random errors on the forces or deformations of cable tensioning so that this technique can be extended to various models of cable-staying bridges. It is important to highlight that this thesis has focused on cable-stayed bridges built through the balanced cantilever method and with concrete girders and considering there are many actual bridges with these characteristics the research has focused on a specific yet extensively applied method.

Wind analysis of the Messina Strait Bridge design project proposal with stabilizing cables

A new study on suspension bridges has been prompted by the big disaster of the Tacoma Narrow Bridge at half its design speed. The aerodynamic instability of long-span bridges has been studied using wind tunnel tests. As a result of improved aerodynamic performance from the geometrical configuration of the bridge deck, the aerodynamic criteria for suspension and cable-stayed bridges have become well established in recent years, thereby allowing longer bridge spans to be developed. Although the Messina Strait Bridge has yet to be constructed, we are looking forward to evaluating the impact of different deck cross-sections on both aerodynamic stability and cost reduction. To further improve the aerodynamic characteristics of long-span suspension bridges, an optimized multi-box bridge deck model with two side decks for traffic lanes, two middle railway decks, and three gaps separating them has been proposed aerodynamic performance has been experimentally verified. 1:80 scale wind tunnel tests have been conducted. According to the current MIDAS Model, the first torsional and the first vertical frequency ratios are 1.27787 and 1.36[1] respectively. It is the torsional/vertical frequency ratio, combined with the deck aerodynamic properties, that determines the wind response properties of the bridge for the most dangerous possible form of aeroelastic instability. The classic flutter is caused by the coupling of torsional and vertical modes. Stabilizing cables to the deck could be a solution to this classic flutter by reducing lateral displacement of the deck and increasing frequency ratios. Stabilizing cables will be installed on the deck in three different orientations: vertical, inclined, and horizontal, with diameters of 80 cm, 60 cm, and 40 cm in each orientation respectively. An overview of the research undertaken on this topic will be presented, as well as the most important findings.