Nitrogênio mineral em um latossolo em função de sistemas de manejo do solo e de culturas de cobertura de inverno

The increasing advancement of agriculture makes providing adequate conditions for the growth and development of plants is the primary purpose of soil management systems. Much of the success of PD is attributed to cultural remains left by cover crops that do not require high nitrogen inputs and can thus be used to reduce nitrogen input in the agro- ecosystem. The nitrogen is one of the elements applied in agriculture, it is absorbed in higher quantities and limiting the yield of grain crops such as corn. Thus, there has been the influence of the no-till and conventional tillage combined with different crops of winter cover and bare soil when in succession to corn, on mineral nitrogen content. The experimental work was made at the experimental station of the Agronomic Institute of Paraná - Iapar. The implemented design was blocks at random split plot with three replications in factorial 6 x 2 x 3 x 5. The main plots were as treatment, beyond the bare soil, 5 winter species (ryegrass, vetch, vetch + oat, oat and radish), while in the subplots were used two tillage systems (No-till and conventional tillage). Three collections made were (before management, the urea before and after the urea), these being held in 5 depths (0-5, 5-10, 10-20, 20-40 and 40-60 cm). So a layer 0-5 cm and a que presents increased amount to NH4 + ion. The use of associated PD system in the presence of winter cover crops decreased as NO3 - losses in soil profile.

Atributos do solo sob modelos em estágio inicial de restauração de floresta subtropical

The replacement of native vegetation by other land uses is one of the main degrading ecosystem agents, being the most important component of terrestrial environments, natural or with different levels of human disturbance, besides being the main substrate used by plants to obtain conditions soil for its development. In this context, there is the need to adopt the use and sustainable management of land systems. The study aimed to evaluate what is forest restoration system more efficient degraded areas, based on the potential recovery of physical, chemical, carbon and biological activity in the soil. The work was conducted in a forest restoration area UTFPR- Campus two neighbors, whose experiment was established in October 2010. The experimental design is completely randomized, with four replications and experimental plot of 40 m wide by 54 m long ( 2160 m2) were collected and six sampling points per plot. The soil is classified as a Typic. The models evaluated are: 1 - natural or passive regeneration; 2 - Nucleation; 3 - Planting trees in the total area under lines fill and diversity (total planting); 4 - Reference area (forest). The collection of soil samples in layers of 0.0-0.05, 0.05-0.10, 0.10-0.20 and 0.20-0.40 m was carried out in October 2013 and evaluated physical attributes of texture, bulk density, total porosity, microporosity and soil macroporosity and stability of water in households, chemical properties, and total organic carbon (TOC) and physical particle size fractionation and soil biological activity. To find the best forest restoration model, we designed a Restoration Quality Weighted Index for each variable analyzed. Natural regeneration and total plantation showed generally better soil aggregation over 0.10 m and nucleation volume of similar porosity the forest for these layers. There were no differences between the models below 0.10 m for the variables aggregation and soil porosity. The nucleation template had the lowest bulk density, but being greater than the density in the layer forest 0.05-0.10 m, however, was similar to below 0.10 m above the ground. The models had chemical properties similar to or greater than the forest. The forest had the highest stock of COT and carbon associated with minerals (CAM), but natural regeneration was similar to the particulate organic carbon (POC) in the superficial layers of the soil (0-0.10 m), below 0, 10 m, the forest showed higher stock of COT and COP on the ground. The highest peak of C-CO2 emissions occurred in the 28-35 day range where the total plantation was similar to forest. After four years of experiments, it was found that the effect of restoration methods on physical attributes and soil carbon restricted to 0.10 m deep.

Desempenho de sulcadores no desenvolvimento e produtividade da soja em solo submetido a diferentes níveis de compactação

On the national scene, soybean crop occupies a prominent position in cultivated area and volume production, being cultivated largely in the no tillage system. This system, due to the intense traffic of machines and implements on its surface has caused soil compaction problems, which has caused the yield loss of crops. In order to minimize this effect the seeder-drill uses the systems to opening the furrow by shank or the double disc type. The use of the shank has become commonplace for allowing the disruption of the compacted surface layer, however requires greater energy demand and may cause excessive tillage in areas where there is not observed high levels of compaction. Thus, this study aimed to evaluate the effects of furrowers mechanisms and levels of soil compacting on traction requirement by a seeder-drill and on the growing and productivity of soybean in an Oxisol texture clay, in a two growing seasons. The experimental design consisted of randomized blocks with split plots with the main plots composed of four levels of soil compaction (N0 – no tillage without additional compaction, N1, N2 and N3 – no tillage subjected to compaction through two, four and six passes with tractor, respectively) corresponding to densities of soil 1.16, 1.20, 1.22 and 1.26 g cm-3, and subplots by two furrowers mechanisms (shank and double disc) with four replicates. To evaluate the average, maximum and specific traction force requested by the seeder-drill, was used a load cell, with capacity of 50 kN and sensitivity of 2 mV V-1, coupled between the tractor and seeder-drill, whose data are stored in a datalogger system model CR800 of Campbell Scientific. In addition, were evaluated the bulk density, soil mechanical resistance to penetration, sowing depth, depth and groove width, soil area mobilized, emergence speed index, emergence operation, final plant stand, stem diameter, plant height, average number of seeds per pod, weight of 1,000 seeds, number of pods per plant and crop productivity. Data were subjected to analysis of variance, the mean of furrowers were compared by Tukey test (p≤0.05), while for the factor soil compaction, polynomial regression analysis was adopted, selected models by the criterion of greater R2 and significance (p≤0.05) of equation parameters. Regardless of the crop season, penetration resistance increase as soil compaction levels up to around 0.20 m deep, and bulk density influenced the sowing quality parameters, however, did not affect the crop yield. In the first season, there was a higher productivity with the use of the shank type. In the second crop season, the shank demanded greater energetic requirement with the increase of bulk density and opposite situation with the double disc. The locking of sowing lines allow better performance of the shank to break the compacted layer.

Qualidade física e matéria orgânica do solo em sistema de integração lavoura - pecuária submetido a doses de nitrogênio

The animal trampling favors the soil compaction process in sheep raising and crop production integrated systems. This compression has negative effects, hindering the development of roots, the availability of nutrients, water and aeration, causing production losses, making it essential for the assessment of soil physical attributes for monitoring soil quality. Soil organic matter can be used to assess the quality of the soil, due to its relationship with the chemical, physical and biological soil properties. Conservation management system with tillage, along with systems integration between crops and livestock are being used to maintain and even increase the levels of soil organic matter. For that, a field experiment was carried out over a Oxisol clayey Alic in Guarapuava, PR, from de 2006 one. experiment sheep raising and crop production integrated systems The climate classified as Cfb .. The study was to evaluate the soil physical properties and quantify the stock of soil organic carbon and its compartmentalization in system integration crop - livestock with sheep under four nitrogen rates (0, 75, 150 and 225 kg ha-1) in the winter pasture, formed by the consortium oat (Avena strigosa) and ryegrass (Lolium multiflorum) and the effect of grazing (with and without). The soil samples blades density evaluations, total porosity, macro and micro, aggregation and carbon stocks were held in two phases: Phase livestock (after removal of the animals of the area) and phase crop (after maize cultivation). The collection of soil samples were carried out in layers of 0-0.5, 0.05-0.10, 0.10-0.20 and m. Data were subjected to analysis of variance and the hypotheses tested by the F test (p <0.05). For the quantitative effect data regression and the qualitative effect used the test medium. In non-significant regressions used the average and standard deviation treatments. The animal trampling caused an increase in bulk density in the 0.10-0.20 m layer. The dose of 225 kg N ha-1 in winter pasture increased total soil porosity at 8% compared to dose 0 kg N ha-1 in the crop stage. The grazing had no effect on soil macroporosity. GMD of aggregates in the phase after grazing the surface layer was damaged by grazing. Nitrogen rates used in the winter pasture and grazing not influence the total organic carbon stocks. The TOC is not influenced by nitrogen fertilization on grassland. The grazing increases the stock of POC in the 0.10-0.20 m layer livestock phase and cause the stock of POC in the 0-0.5 m layer in the crop stage. The MAC is not influenced by N rates applied in the pasture or by grazing.

Efeitos diretos e indiretos de parâmetros dos semivariogramas referentes aos atributos químicos do solo sobre a produtividade de grãos de soja

In order to add value to soybens crops, and hence the marketing, medium and large producers have been using precision agriculture techniques (PA), as the Remote Sensing, Geographic Information Systems (GIS) and positioning satellite, to assist the management of crops. Thus, given the economic relevance of that culture to the southwest of Paraná State and Brazil, scientific studies to increase their productivity and profitability are of main importance. The objective of this study was to evaluate the correlation between the chemical soil properties and soybean yield for each estimated parameter of semivariogram (range, nugget and level effect), and the deployment of these correlations in direct and indirect effects, aiming to improve the mapping process of spatial variability of soil chemical properties for use in PA. The hypothesis is that not all attributes of soil used to estimate the semivariogram parameters has a direct effect on productivity, and that even in groups of plants within a larger area it is possible to estimate the parameters of the semivariograms. The experiment was conducted in a commercial area of 19.7 ha, located in the city of Pato Branco - PR, central geographic coordinates 26º 11 '35 "South, 52 43' 05" West longitude, and average altitude of 780 m. The area is planted with soybeans for over 30 years, currently being adopted to cultivate Brasmax Target RR - Don Mario 5.9i, with row spacing of 0.50 m and 13 plants m-1, totaling 260,000 plants ha-1. For georeferencing of the area of study and sampling points was used a couple of topographic ProMarkTM3 receptors, making a relative positioning to obtain the georeferenced coordinates. To collect data (chemical analyzes of soil and crop yield) were sampled 10 blocks in the experimental area, each with an area of 20 m2 (20 meters long x 1 meter wide) containing two spaced adjacent rows of 0.5 m. Each block was divided into 20 portions of 1 m2, and from each were collected four subsamples at a distance of 0.5 m in relation to the lines of blocks, making up a sample depth for 0-10 cm a sample to 10-20 cm for each plot, totaling 200 samples for each depth. The soybean crop was performed on the blocks depending on maturity, and in each block was considered a bundle at each meter. In the data analysis, it was performed a diagnosis of multicollinearity, and subsequently a path analysis of the main variables according to the explanatory variables (range of chemical attributes: pH, K, P, Ca, etc.). The results obtained by the path analysis of the parameters of the semivariogram of soil chemical properties, indicated that only the Fe, Mg, Mn, organic matter (OM), P and Saturation by bases (SB) exerted direct and indirect effects on soybean productivity, although they have not presented spatial variability, indicating that the distribution of blocks in the area was unable to identify the spatial dependence of these elements, making it impossible to draw up maps of the chemical attributes for use in PA.

Destino no ambiente e comportamento agronômico de atrazina em resposta a doses e níveis de palha de espécies de cobertura de solo

The use of cover crops is a fundamental strategy to the weed management in Southern Brazil. In highly infested areas, the herbicides use is increasing, which increases the costs of the crops production as well as the environmental contamination. Oat and velvet bean plants havecontrasting characteristics regarding to residues decomposition speed and the capacity to immobilize Nitrogen in the soil, providing distinct results of weeds suppression throughout the time, and therefore, requiring distinct management strategies before, during, and after the corn crop establishment. The general objective of the experiment was to evaluate the environmental dynamics of the herbicide atrazine, the corn grain yield, and the efficiency of the weed control, considering areas with distinct history regarding the use of mulching, levels of straw and rates of atrazine. For this, the experiment was carried out in two parts: in the first part, two trials with the corn crop were established, one using oat and the other using velvet bean as cover crops. The experimental design used for both field trials was randomized complete blocks arrangement with four replications. The factor A was constituted by four levels of straw (0; 0.75x; 1.5x; 3x) and the factor B was constituted by four rates of the herbicide atrazine (0; 2100; 4200; 8400 g a i. ha-1). Soil samples were collected for greenhouse trialsto determine the persistence. Atrazine leaching evaluation was performed by chromatography using samples collected over the soil profile.In the field, the weed density, the fresh and dry weight and the yield of the corn were evaluated. In the greenhouse trials, the main variables evaluated were plant height and injury caused by the herbicide toxicity. In the second part, soils with distinct covering history were sampled, and the mineralization and sorption studies, both with 14C-atrazine, were conducted in the laboratory. The experimental design was randomized complete blocks arrangement with four replications. The results from the field experiment show that the high levels of straw above ground, isolated, were not efficient to control completely the weeds, and that high levels of velvet bean`s straw decreased the corn potential yield. The greenhouse trials showed that high levels of oat straw prevent the scape of atrazine to soil, this effect of oat straw upon the herbicide availability on soil was detected up to 12 days after spraying. The half-life of atrazine sprayed over oat straw varied from 7 to 14 days after spraying, while the half-life of atrazine sprayed over velvet bean varied from 5 to 14 days after spraying. Increasing oat straw levels presents the capacity to reduce the lixiviation of atrazine in the soil profile, however, this effect was not verified when using velvet bean straw, because the herbicide was not detected in the soil profile, at 21 days after spraying. The chromatographic analysis indicate thatthe atrazine concentrates closer to the soil surface regardless of amount of straw, not being detected deeper than 8 cm in the soil. The accumulated mineralization of 14C-arazine sprayed over V. sativa is superior if compared to soils with S. cereale or non-covered soils. The sorption coefficient of atrazine is superior when sprayed over straw than over the soil.

Sistemas de produção de milho sob adubação nitrogenada e plantas de cobertura do solo

The no-tillage system is the predominant model in the agricultural scenario of southern Brazil. Thus, the use of cover crops is significant due to the addition of biomass to protect the soil surface, and contribute to the cycling and/or fixing of nutrients, and in particular nitrogen (N) with liberation for the subsequent culture. Among the cool season species, it was found predominant use of oat to obtain straw to system. Though large quantities input of residue is not the preferred species to precede the corn, cereal with relevant importance in the Paraná Southwest region. It was aimed to evaluate the productivity capacity of corn in no-tillage, in the absence or presence of nitrogen fertilization, on waste of winter cover crops on soil and climatic conditions of the Paraná Southwest region. The installation of no-tillage was held in 2010 in the experimental area belonging to UTFPR, Campus Dois Vizinhos, on a Red Latosol. For the present study, we used data relating to three agricultural years (2012/2013, 2013/2014 and 2014/2015). The experimental design was randomized block design with split plots with three replications. The main plots consisted of systems composed by cover crops (black oat, ryegrass, rye, turnip, vetch, white lupine, aot+vetch consortium and oat+vetch+turnip), preceding corn. In the subplots were used two doses of nitrogen fertilization (0 and 180 kg ha N) coverage in maize.The biggest coverage rates occurred in the consortium with 95% at 62 days after sowing. The residual effect of 180 kg ha cool season plants following year. The residual effect of 180 kg ha systems, reduced in 21% the C/N ratio of poaceae. The common vetch accumulated 32 kg N per ton of MS added. The oat and rye keeps more than 50% waste to the land cover, after 120 days, while the ryegrass and vetch provide low soil protection. Consortium oat+vetch+turnip, vetch and white lupine, released the largest amounts of N, between 52 and 59 kg ha brassica and consortia positively influencing the diameter and length of cobs, number of kernels per row and, total number of grains per ear of corn, in the absence of mineral N. The weight of a thousand grains was increased by 12.4% by the addition of 180 kg ha increase in productivity of grain by the addition of 180 kg ha N, was 2.1 Mg ha 5.6 Mg ha 6.4 Mg ha components when cultivated on vetch. Systems containing fabaceae, brassica and consortium oat+vetch+turnip, predating the corn, in the absence of mineral N, provided similar grain yelds inrelation to the systems with the addition of 180 kg ha Keywords: Cover crops. No-tillage. Grain yield. Zea mays - 1 -1 N, increased 4.8% coverage rate in the of N in corn/cover crops -1 -1 . Fabaceae, -1 N mineral. The average N, in relation to dose 0 kg ha corn kernels on fabaceae, brassica and consortium oat+vetch+turnip, and poaceae the grains in succession. The consortium added amount between 4.0 the DM in the years of study. There was no effect of mineral N rate for corn yield components when cultivated on vetch. Systems containing fabaceae, brassica and consortium oat+vetch+turnip, predating the corn, in the absence of mineral N, provided similar grain yelds inrelation to the systems with the addition of 180 kg ha-1 N.

Adubação nitrogenada no milho em sucessão à plantas de cobertura sob sistemas de cultivo do solo

To achieve high yields the corn crop is dependent on nitrogen. Systems of cover crops preceding corn and form of land cultivation are essential for the best use of nitrogen by corn. This study aimed to evaluate the use or not of nitrogen fertilization in corn in succession to cover crops, planted in three cropping systems. The experimental design was randomized blocks with sub-divided portion where the main plots consisted of three cultivation systems (tillage, conventional tillage and minimum tillage), the subplots by four plant cover in monocrop (oat, hairy vetch, field peas and turnip) and sub-subplots by nitrogen fertilization (0 and 160 kg ha-1 N). Evaluations were performed, the cover crops, soil cover rate, dry matter, content and accumulation of nutrients. In corn we evaluated yield components, yield, chlorophyll and nutrient levels in leaves. Among the species coverage studied the oat showed hardiness in the experiment, covering ground faster and showing more dry matter, however vetch hairy showed higher concentrations of N, P and K and higher accumulation of N ha-1. The soil tillage system influenced the K leaf content. The interaction cultivation x coverage showed significance for the total chlorophyll of corn. In the absence of N, N content and chlorophyll were higher where the corn was sown on the pea and hairy vetch. The corn production, despite a higher average in the presence of nitrogen fertilization, did not differ significantly when used the pea and hairy vetch as a cover crop.

Fontes de matéria orgânica para a formulação de fertilizantes organominerais peletizados no desenvolvimento da cultura do sorgo

Organo-mineral fertilizers have been used to both meet plants’ nutritional needs and reduce producers’ reliance on mineral fertilizers. This practice improves both the use of nutrients by plants and the soil structure due to the organic matter in these fertilizers. This study aimed to determine the effect of organic matter sources in the composition of organomineral fertilizers and compare it to the effect of traditional mineral fertilizers when it comes to the initial development of sorghum. Research was carried out in a greenhouse at the Federal University of Uberlandia, in Uberlandia, Minas Gerais, Brazil. Sorghum seeds of grain-bearing simple hybrid 1G100 were used in the seeding process. The experiment followed a randomized complete block design in a 4 x 3 + 2 factorial arrangement. Factors included four levels (50, 75, 100 and 125% of 450 kg ha-1, which is the recommended dose for sorghum crops), three organic matter sources in the composition of the organomineral fertilizers (sewage sludge, filter cake, and peat), a control (100% mineral fertilizer), and an untreated check (no fertilizers). Each experimental plot consisted of four plants divided into two pots. Oxisol was used in all pots. Analyses were performed at 30 and 60 days after seeding (DAS) and targeted: plant height, stem diameter, chlorophyll A, chlorophyll B, and leaf area. After this period, plants were removed from the soil, and had their aerial parts isolated to be dried in an air-forced oven before measurement of their dry mass. Means of the organomineral fertilizers outperformed those of both control and untreated check plots in almost all variables at 30 DAS. The only exception was variable stem diameter, in which organomineral fertilizers outperformed untreated check plots only. Sorghum fertilized with organomineral fertilizers also showed positive results in the variables analyzed at 60 DAS: even with dose reduction, their means were similar to those found in control plots. Organomineral fertilizers had higher means in some variables, such as diameter and dry mass of the aerial part, than both control and untreated check plots. In the conditions set in this study and considering the variables herein reported, organomineral fertilizers can substitute mineral fertilizers in the initial development of sorghum, even with some dose reductions.

Resposta da batata cv. Cupido à fertilização organomineral

Potato crop cycle is relatively short and presents high yield per area; therefore, it is a very demanding culture for available nutrients in the soil solution. Despite its importance and the large number of studies about the crop, there is little research on plant nutrition regarding the use of organomineral fertilizer. This study evaluated potato, cv. Cupid, development and productivity as a function of fertilization with pelletized organomineral fertilizer. The experiment was done in Perdizes, Minas Gerais, in the rainy season of 2014/2015. The experimental design was a randomized blocks, with factorial arrangement of 4 x 2 (doses x management) and a control with mineral fertilizer, with 3 repetitions. Organomineral fertilizer doses were 25, 50, 75 and 100% of the conventional mineral dose, which was 600 kg ha-1 K2SO4, 850 kg ha-1 NH4H2PO4, and 300 kg ha-1 (NH4)2SO4 of topdressing 19 days after planting (DAP). Fertilization managements were with or without topdressing at 19 DAP, when the potato was hilled. Two plants per plot were sampled at 36, 50, 64 and 81 DAP and analyzed for leaf, stem and dry matter contents. DRIS - Diagnosis and Recommendation Integrated System was applied at 36 DAP and the potatoes were harvested 112 DAP and subjected to tuber classification. Throughout the cycle, stem, leaf and tuber dry mass showed no significant differences between the fertilization managements. The doses of organomineral fertilizer and topdressing management does not affect productivity, and the lower doses (25%) were similar the greater ones and the control, with an average of 16.8 t ha-1, demonstrating that it is viable to make a single application of organomineral fertilizer at planting due to operational efficiency. The low yields observed were due to high rainfall and temperature, creating favorable conditions for the incidence of pests and diseases. According to DRIS, the organomineral dose 75% for topdressing, presented the best nutritional balance.

Métodos de extração de fósforo e micronutrientes em latossolos com uso de energia ultrassônica

Assessing the soil nutrient availability to plants under lab conditions is one of the main challenges to Soil Fertility and Chemistry, due to the complex behavior and the interaction of the soil properties. Many extractant solutions associated with mechanical forms of agitation have been proposed, showing different correlations with plant growth and nutrients absorption. Using ultrasonic energy is a agitation procedure of the soil:extractant solution suspension (based on the cavitation phenomenon). It allows the establishment of relations between the amount of extracted nutrient and the ultrasonic energy level. Thus, this work aims: to evaluate the effect of cavitation intensity on the extraction of P, Zn, Cu, Mn and Fe in soil samples from five Latosols under different uses around Uberlândia and Uberaba, Minas Gerais State; to obtain extracting curves as function of ultrasonic energy levels; and to obtain an index from extracting curves to expresses the nutrient retention by the soil solid phase. A soil-solution suspension (ratio 1:10) was sonicated using a probe ultrasound equipment under different combinations of power and time: i) 30 W for 35, 70, 140 and 280 s; ii) 50 W for 21, 42, 84 and 168 s; and iii) 70 W for 15, 30, 60 and 120 s. The extractant solutions used were Mehlich-1 (for all elements), Olsen and distilled water for P. After each sonication, P concentration was quantified by molybdenum blue colorimetric method and Zn, Cu, Mn and Fe by flame atomic absorption spectrophotometry. The cavitation intensity did not affect the P extraction, only the total energy applied. The P extraction was influenced by extractant solution, decreasing as follows: Mehlich-1>Olsen>water. In cultivated Latosols, the P extraction increased linearly with ultrasonic energy, and the slope of the 1:1 linear regression reflects the P retention in the soil. The Zn and Fe extractions were influenced only by total energy applied. Mn and Cu extractions were influenced by both cavitation intensity and total ultrasonic energy. Soils containing similar amounts of P, Cu, Zn, Mn, and Fe may have a different extraction rate. Likewise, soils containing different amounts of those elements may have the same extraction rate.

Diagnóstico ambiental da área de influência do complexo sucroalcooleiro Usina Vale do São Simão Ltda

One of the most widespread renewable energy sources in Brazil is ethanol, from sugarcane, therefore, the sugar and alcohol sector is expanding, with positive impacts for the economy of the country. Sugar cane was introduced in Brazil as a crop during its colonization, for the production of sugar, and put the country in the global scenario. The expansion of this crop occurred in the seventies, to reduce the reliance in fossil energy sources and to stimulate the development of the agricultural activity. Thus, the federal government has promoted the sugar cane crop and the production of ethanol as a fuel. However, it is important to minimize possible impacts that the crop may cause to the environment. Sugar cane has expanded in the frontiers of the mesoregion of Triângulo Mineiro and Alto Paranaíba-MG, and, in this perspective, the agroindustrial complex known as Companhia Energética Vale do São Simão Ltda., with the Mill located in the county of Santa Vitória, Minas Gerais, was adopted to evaluate the environmental impacts caused by the sugarcane in the area of influence of the mill. The mill has a polygonal area corresponding to 53,525.20 hectares, and for its establishment a Study and Report of Environmental Impacts (EIA/RIMA) was presented, as required as an environment protection instrument by the Environment National Policy (Law nº 6.938/81), and detailed by the Resolution CONAMA nº 01/1986. These studies pointed that native vegetation fragments in the Area of Influence of the Mill, before its implantation, corresponded to approximately 20.7% of the area. Therefore, this study evaluated the impacts of the installation of Usina Vale do São Simão, between 2007 and 2012, determining its reflex on the environmental regularization of the farms, and the vegetation fragments existing in the area, in the recovery and recomposition of areas defined as Legal Reserve and Permanent Preservation. Previous studies of the area were analyzed, soil use and occupation was mapped for the years 2007 and 2012, and the areas of permanent preservation and native vegetation fragments were marked. In general, there was a decline in native vegetation coverage in the period, although it cannot be stated that such reduction was a direct effect of the milling activity. Therefore, the legal requirement of preserving such areas was not capable of bringing the positive effects of protection and recovery as demanded by the Law, highlighting that the current legislation was not enough to protect such areas.

Potencial fisiológico de sementes de soja enriquecidas com molibdênio no armazenamento e sua influência na atividade de enzimas do metabolismo do nitrogênio

Molybdenum is one of the essential micronutrients for soybeans, acting directly on nitrogen metabolism as enzyme cofactor of nitrogenase. Usually, this nutrient is supplied to the plants through seed treatment or foliar application. The aim of this study was to evaluate the molybdenum effects by foliar in the physiological potential of soybean seeds and verify its interference in the enzyme activities involved in nitrogen metabolism. Soybean seeds of BMX Turbo cultivar were used, produced in Erechim, RS, harvest 2013, from plants treated with the following Mo concentrations: 0; 25; 50 and 75 g ha-1, supplied through two commercial products (Biomol and Molybdate) and stored during 0 and 6 months in uncontrolled conditions. The first experiment was conducted in Seedtes Seed Analysis Laboratory in Pato Branco, PR. The used design was completely randomized in a factorial analysis 4 x 2 x 2 with four replications each. The physiological potential of the seeds was evaluated by the germination test, seedling growth, accelerated aging and emergence on the soil. The second experiment was conducted in a greenhouse, where the seeds derived from treatments with different concentrations of Mo: 0; 25; 50 and 75 g ha-1 supplied through two commercial products (Biomol and Molybdate) were grown in vases. The used design was completely randomized in a factorial analysis 4 x 2 with four replications. Evaluations were performed when the plants reached the R1 phenological stage concerning the nodulation, dry matter of root and shoot of the plants and the determination of the activity of the enzymes glutamine synthetase and glutamate synthetase and the content of total soluble proteins. The data were submitted to variance analysis and when significant they were assessed by Tukey’s test for comparison of products and seed storage and with regression study to the concentrations at 5% probability. Analyses were performed using SISVAR statistical software. The soybean seed storage under uncontrolled conditions affected the seed vigour produced with Mo, regardless of the commercial product used during production. The application of Mo through foliar positively influences the production of soya beans which presented increasing responses in the germination and vigour with the application of Mo above 25 g ha-1 . The enrichment of Mo through foliar did not affect the nodulation of plants of the next generation, however, the use of Mo above 25 g ha-1 provided an increase in the activity of enzymes involved in nitrogen metabolism as well as on the total protein content.

Crescimento e desenvolvimento de Plinia cauliflora de acordo com a intensidade luminosa em clima subtropical

The jabuticaba fruit tree from classified in the Myrtaceae family and Plinia genre. There are about nine species of this fruit tree, that include as most important, Plinia trunciflora (jabuticaba de cabinho), naturally occurring in southwestern Paraná State, Brazil, P. cauliflora (jabuticaba Paulista or Jabuticaba Açu) and P. jaboticaba (Vell) (jabuticaba sabará), with all the over species producing fruit for the industry or fresh consumption. Nevertheless, there aren‟t commercial orchards with this culture, with highest yield part from extractive. This fact can be combined with lack of technical knowledge for the plants produce in the field. As these species are found in the forest, the first point is whether they can adapt to other light intensity conditions. The aim of this work was to identify the adaptive behavior of jabuticaba fruit seedling and tree when they were put in different light intensities and what this can be considered ideal for the growth, as well as, its influence in the leaves secondary compounds production. Two experiments were conducted, with the first involved with the study of the seedlings and the second with plants in the field. The work was carried out at Universidade Tecnológica Federal do Paraná – Câmpus Dois Vizinhos, Paraná State - Brazil. The experimental design was a completely randomized and a block design with four treatments and four replications of 10 seedlings or two plants per plot, according to nursery or orchard conditions, respectively. The treatments were base according to the light intensity. The treatments used were, 1 - full sun, similar the orchard condition, with 0% shading; 2 - side cover with shade cloth and top with transparent plastic, representing a gap forest condition; 3 - side and top cover with shade cloth, representing stage where the forest canopy is closing, focusing only indirect sunlight; 4 - side and top cover with shade cloth, simulating a closed canopy condition, with PPD (photon flux density) of 10% (90% shading); 5 - side and top cover with shade cloth, simulating a more open canopy condition with PPD 65% (35% shading). The growth and development seedling and plant characteristics were evaluated once by month, as also, during time part in the plants the secondary metabolites leaves, soil activity microbiological and the fresh and dry matter root and shoot and, root length from seedlings. For the growth and development of jabuticaba Açú Paulista seedling recommend to use of side cover with shade cloth and top with transparent plastic, representing a gap forest condition. In orchard, for the growth and development of plants jabuticaba Híbrida tree it was recommended the use of side and top cover with shade cloth of some type. For production of secondary metabolites of leaves, the plant must to be full sunlight condition orchard.

Adubação de sistemas: antecipação de adubação nitrogenada para a cultura do milho em integração lavoura-pecuária

Traditionally in no-tillage systems, fertilization is done to the catch crop. In general nutrient cycling in crop systems has not been treated as an important tool in the process of nutrient supplying for plants. The type and the condition in which vegetable residuesis decomposed can affect the efficiency of nutrient cycling.This study assessed the effect of anticipated nitrogen fertilization in crop-livestock systems on cultivated cornproduction, rate ofnutrient release from plant residue, and theN-minerallevels of soil. The study was carried out in the city Abelardo Luz (SC) in a Clayey Oxisol. The experimental design was a randomized block design with three replications. The treatments were arranged in a 2 x 2 factorial arrangement. The first factor was N Fertilization Time: in the N-Pasture level, nitrogen (200 kg ha-1 N) and N-Grains level, no nitrogen was applied. The second factor was the Grazing Height, characterized by two sward heights of oat at 15 cm (Low Height Pasture) and at 30 cm (High Height Pasture). Corn hybrid ‘Máximus’ was sowed in 10thOctober, 31 days after the removal of animals. In the twelve resulting plots from the combination of treatments on pasture phase (N Fertilization Time x Grazing Height) rates of N-fertilizer (0, 100, 200 e 300 Kg ha-1 of N) as urea were allocated in the split plot.We conclude that anticipated N fertilization of winter cover crop pasture to provide high-quality forage and carry-over N to the subsequent corn crop and may eventually replace side drees nitrogen fertilization on corn and can improve overall N fertilizer efficiency use in integrated crop-livestock systems.The rate of K release from plant residues is very fast, releasing large quantities in the first days after plant desiccation.Despite of considerably high nitrogen dose used in both the pasture and at the grain crop it was not observed nitrate leaching risks during the study period.