Estudos sobre a alimentação mineral do algodoeiro. II. Deficiências de micronutrientes na variedade I. A. C. 11

No sentido de se obter o quadro sintomatológico da carência dos micronutrientes, assim como dados analíticos, cultivou-se em solução nutritiva purificada plantas de algodão da variedade I. A. C. 11. Foi obtido o quadro sintomatológico das carências de B, Cu, Fe, Mn, Mo e Zn. A análise química das folhas novas afetadas pelas carências apresentou os seguintes valores (ppm): B=33; Cu=4,8; Fe=238; Mn=8,7; Mo = 0,12: Zn=25,2.

Measurements of glial metabolic fluxes with C-11-acetate using positron emission and an adapted NMR-based metabolic modeling approach

Objectives: Acetate brain metabolism has the particularity to occur specifically in glial cells. Labeling studies, using acetate labeled either with 13C (NMR) or 11C (PET), are governed by the same biochemical reactions and thus follow the same mathematical principles. In this study, the objective was to adapt an NMR acetate brain metabolism model to analyse [1-11C]acetate infusion in rats. Methods: Brain acetate infusion experiments were modeled using a two-compartment model approach used in NMR.1-3 The [1-11C]acetate labeling study was done using a beta scintillator.4 The measured radioactive signal represents the time evolution of the sum of all labeled metabolites in the brain. Using a coincidence counter in parallel, an arterial input curve was measured. The 11C at position C-1 of acetate is metabolized in the first turn of the TCA cycle to the position 5 of glutamate (Figure 1A). Through the neurotransmission process, it is further transported to the position 5 of glutamine and the position 5 of neuronal glutamate. After the second turn of the TCA cycle, tracer from [1-11C]acetate (and also a part from glial [5-11C]glutamate) is transferred to glial [1-11C]glutamate and further to [1-11C]glutamine and neuronal glutamate through the neurotransmission cycle. Brain poster session: oxidative mechanisms S460 Journal of Cerebral Blood Flow & Metabolism (2009) 29, S455-S466 Results: The standard acetate two-pool PET model describes the system by a plasma pool and a tissue pool linked by rate constants. Experimental data are not fully described with only one tissue compartment (Figure 1B). The modified NMR model was fitted successfully to tissue time-activity curves from 6 single animals, by varying the glial mitochondrial fluxes and the neurotransmission flux Vnt. A glial composite rate constant Kgtg=Vgtg/[Ace]plasma was extracted. Considering an average acetate concentration in plasma of 1 mmol/g5 and the negligible additional amount injected, we found an average Vgtg = 0.08±0.02 (n = 6), in agreement with previous NMR measurements.1 The tissue time-activity curve is dominated by glial glutamate and later by glutamine (Figure 1B). Labeling of neuronal pools has a low influence, at least for the 20 mins of beta-probe acquisition. Based on the high diffusivity of CO2 across the blood-brain barrier; 11CO2 is not predominant in the total tissue curve, even if the brain CO2 pool is big compared with other metabolites, due to its strong dilution through unlabeled CO2 from neuronal metabolism and diffusion from plasma. Conclusion: The two-compartment model presented here is also able to fit data of positron emission experiments and to extract specific glial metabolic fluxes. 11C-labeled acetate presents an alternative for faster measurements of glial oxidative metabolism compared to NMR, potentially applicable to human PET imaging. However, to quantify the relative value of the TCA cycle flux compared to the transmitochondrial flux, the chemical sensitivity of NMR is required. PET and NMR are thus complementary.

Comparison of C-11 methionine and C-11 choline for PET imaging of brain metastases: a prospective pilot study

The aim of the study was the comparison of C-11 methionine (MET) and C-11 choline (CHO) in the positron emission tomography (PET) imaging of brain metastases in correlation to the histopathology findings in stereotactic biopsy.

Uma Introdução à Sintaxe do C++: C++03 e C++11

A interacção dos humanos com os computadores envolve uma combinação das tarefas de programação e de utilização. Nem sempre é explícita a diferença entre as duas tarefas. Introduzir comandos num programa de desenho assistido por computador é utilização ou programação numa linguagem interpretada? Modificar uma folha de cálculo com macros é utilização ou programação? Usar um “Integrated Development Environment” ou IDE para inserir dados num ficheiro é utilização (do IDE) ou programação? A escrita de um texto usando LaTeX ou HTML é utilização ou programação numa “markup language”? Recorrer a um programa de computação simbólica é utilização ou programação? Utilizar um processador de texto é utilização ou programação visual? Ao utilizador não se exige um conhecimento completo de todos os comandos, todos os menus, todos os símbolos do software que utiliza. Nem a memorização da sintaxe e de todos os pormenores de funcionamento de um programa é um atributo necessário ou sequer útil ao utilizador; a concretização desse conhecimento não assegura maior eficiência na utilização. Quando se começa, apenas algumas instruções elementares são recebidas, por vezes de um colega, de um Professor, ou obtidas recorrendo à pesquisa na Internet. Com a familiarização, o utilizador exige mais do Software que usa e de si próprio: um manual passa a ser um recurso de grande utilidade. A confiança conquistada gera, periodicamente, a necessidade de auto-exame e de aumento do âmbito do conhecimento. Desta forma, quem utiliza computadores acaba por ser confrontado com uma tarefa que, efectivamente, pode ser considerada ou requer programação. Põe-se uma questão no imediato (se ninguém decidiu por si) que é a da selecção da linguagem de programação. A abordagem multiparadigma e longa experiência de utilização do C++ tornam-no atractivo para aplicações onde a eficiência se combina com a disponibilidade de estruturas de dados e algoritmos adoptados pela indústria (o que coloquialmente se denomina STL, Standard Template Library, cf. [#breymann, #josuttis], mais geralmente biblioteca Standard). Adicionalmente, linguagens populares como o Java, C# e PHP possuem sintaxes inspiradas e em muitas partes coincidentes com as do C e C++. Por exemplo, um ciclo “for” em Java é parcialmente coincidente com o do C99, que é um sub-conjunto do “for” do C++. São os pormenores, a eficiência e as capacidades do C++ que permitem a criação de software Profissional. Todos os sistemas operativos clássicos (Unix, Microsoft Windows, Linux) dispõem de compiladores, IDE, bibliotecas e são em grande parte construídos recorrendo a C e C++. Relativamente a outras linguagens, a quantidade de ferramentas disponível e o conhecimento adquirido durante décadas é difícil de ignorar. Esse conhecimento faz com que a sintaxe do C++ pareça muito maior do que o estritamente necessário e afaste potenciais interessados. A longa evolução do C++ introduziu também uma diferença no estilo muito marcada. Código dos anos 80 e 90 do século XX é frequentemente menos legível do que o que correntemente se produz. Muitos tutoriais disponíveis online fazem parecer a linguagem menos rigorosa (e mais complexa) do que na realidade é, já que raramente é apresentado o caso geral da sintaxe. Constata-se que muitos autores ainda usam os cabeçalhos do C, quando já não são necessários. Scott Meyers afirma que o C++ é uma federação de linguagens [#scottmeyers] e por esse facto requer perspectivas de abordagem distintas de outras linguagens. Sem alguma sistematização é difícil apreciar a sua compacidade e coerência. Porém, a forma harmoniosa como as componentes sintácticas se encaixam é uma grande mais-valia do C++ só constatada com experimentação e leitura atenta. A presente monografia dirige-se a quem pretenda utilizar o C++ como ferramenta profissional de Software. Em termos de pré-requisitos Académicos, dir-se-á que um curso (1º Ciclo) de Ciência ou de Engenharia aumentará o interesse por certos aspectos mais técnicos da linguagem mas qualquer indivíduo com gosto pela experimentação tirará proveito do conteúdo. Este texto não busca a exaustividade enciclopédica na cobertura do tema. Neste texto forneço, de forma directa, uma introdução ao C++ a qual permite começar a produzir código sem os custos da dispersão de fontes e notações na recolha de informação. Antecipo assim a sua utilização nos Países de Língua Portuguesa, uma vez que os textos que encontrei são ora mais exigentes ora menos completos, frequentemente ambos.

Useful Strategies for Algal Volatile Analysis

The production of volatile organic compounds (VOC) by plants is well known. However, few scientific groups have studied VOC produced by green, brown and red algae. Headspace collection of volatiles and solid phase microextraction, as well as the traditional extraction by hydrodistillation combined with analytical chromatographic techniques (i.e., GC-MS), have significantly improved the investigation of VOC from plants and algae. The major volatile compounds found in seaweeds are hydrocarbons, terpenes, phenols, alcohols, aldehydes, ketones, esters, fatty acids and halogen or sulfur-containing compounds. This article presents an overview of VOC isolated from and identified in marine macro-algae. Focus is given to non-halogenated and non-sulfur volatile compounds, as well as strategies to analyze and identify algal VOC by GC-MS.

First imaging results of an intraindividual comparison of (11)C-acetate and (18)F-fluorocholine PET/CT in patients with prostate cancer at early biochemical first or second relapse after prostatectomy or radiotherapy.

PURPOSE: (18)F-Fluorocholine (FCH) and (11)C-acetate (ACE) PET are widely used for detection of recurrent prostate cancer (PC). We present the first results of a comparative, prospective PET/CT study of both tracers evaluated in the same patients presenting with recurrence and low PSA to compare the diagnostic information provided by the two tracers. METHODS: The study group comprised 23 patients studied for a rising PSA level after radical prostatectomy (RP, 7 patients, PSA ≤ 3 ng/ml), curative radiotherapy (RT, 7 patients, PSA ≤ 5 ng/ml) or RP and salvage RT (9 patients, PSA ≤ 5 ng/ml). Both FCH and ACE PET/CT scans were performed in a random sequence a median of 4 days (range 0 to 11 days) apart. FCH PET/CT was started at injection (307 ± 16 MBq) with a 10-min dynamic acquisition of the prostate bed, followed by a whole-body PET scan and late (45 min) imaging of the pelvis. ACE PET/CT was performed as a double whole-body PET scan starting 5 and 22 min after injection (994 ± 72 MBq), and a late view (45 min) of the prostate bed. PET/CT scans were blindly reviewed by two independent pairs of two experienced nuclear medicine physicians, discordant subgroup results being discussed to reach a consensus for positive, negative end equivocal results. RESULTS: PET results were concordant in 88 out of 92 local, regional and distant findings (Cohen's kappa 0.929). In particular, results were concordant in all patients concerning local status, bone metastases and distant findings. Lymph-node results were concordant in 19 patients and different in 4 patients. On a per-patient basis results were concordant in 22 of 23 patients (14 positive, 5 negative and 3 equivocal). In only one patient was ACE PET/CT positive for nodal metastases while FCH PET/CT was overall negative; interestingly, the ACE-positive and FCH-negative lymph nodes became positive in a second FCH PET/CT scan performed a few months later. CONCLUSION: Overall, ACE and FCH PET/CT showed excellent concordance, on both a per-lesion and a per-patient basis, suggesting that both tracers perform equally for recurrent prostate cancer staging.

Cyclotron production of 11^C: experimental assessment of saturation yield and validation with Monte Carlo simulation

Nell'ambito della Fisica Medica, le simulazioni Monte Carlo sono uno strumento sempre più diffuso grazie alla potenza di calcolo dei moderni calcolatori, sia nell'ambito diagnostico sia in terapia. Attualmente sono disponibili numerosi pacchetti di simulazione Monte Carlo di carattere "general purpose", tra cui Geant4. Questo lavoro di tesi, svolto presso il Servizio di Fisica Sanitaria del Policlinico "S.Orsola-Malpighi", è basato sulla realizzazione, utilizzando Geant4, di un modello Monte Carlo del target del ciclotrone GE-PETtrace per la produzione di C-11. Nel modello sono stati simulati i principali elementi caratterizzanti il target ed il fascio di protoni accelerato dal ciclotrone. Per la validazione del modello sono stati valutati diversi parametri fisici, tra i quali il range medio dei protoni nell'azoto ad alta pressione e la posizione del picco di Bragg, confrontando i risultati con quelli forniti da SRIM. La resa a saturazione relativa alla produzione di C-11 è stata confrontata sia con i valori forniti dal database della IAEA sia con i dati sperimentali a nostra disposizione. Il modello è stato anche utilizzato per la stima di alcuni parametri di interesse, legati, in particolare, al deterioramento dell'efficienza del target nel corso del tempo. L'inclinazione del target, rispetto alla direzione del fascio di protoni accelerati, è influenzata dal peso del corpo del target stesso e dalla posizione in cui questo é fissato al ciclotrone. Per questo sono stati misurati sia il calo della resa della produzione di C-11, sia la percentuale di energia depositata dal fascio sulla superficie interna del target durante l'irraggiamento, al variare dell'angolo di inclinazione del target. Il modello che abbiamo sviluppato rappresenta, dunque, un importante strumento per la valutazione dei processi che avvengono durante l'irraggiamento, per la stima delle performance del target nel corso del tempo e per lo sviluppo di nuovi modelli di target.

Niveles de anticuerpos bactericidas frente a meningococo C tras la vacunación de niños de 2 a 6 años de edad en Andalucía.

BACKGROUND In 1997, 18.5% of the cases of Meningococcal Disease caused b serogroup C in Andalusia were children between 2 and 4 years of age; ages where the initial immune response and the duration of the capsular A + C meningococcal polysaccharide vaccine is less than in older age groups. Research was designed in order to measure the immune response produced by this vaccine in children from 2 to 6 years of age and to compare it with the natural immunity present in unvaccinated children. METHODS I. Dual monitoring study: a) groups of children vaccinated previously and control groups, b) groups of children who were going to be vaccinated, for pre and post-vaccination (1, 6 and 12 months) analysis and a control group. II. The bactericidal activity was measured according to the standardised protocol of the CDC with regard to the strain of N. meningitidis C-11. The sera with bactericidal activity (TAB) > 1:8 were considered to be protective. RESULTS 1 and 2 months following vaccination, the proportion of TAB > 1:8 was significantly higher than that of the control group (65.6% and 73% in comparison to 2.2% and 12%). In the pre-vaccine and post-vaccine (after 6, 7, 12 and 13 months) verification, no significant difference between vaccinated individuals and controls was observed. CONCLUSIONS The differences between vaccinated and unvaccinated individuals 1 and 2 months following vaccination indicate seroconversion in the vaccinated individuals. For the age group of between 2 to 6 years of age, the bactericidal activity acquired decline quickly, as, after 6 months, differences between this group and the control group are no longer observed.

C-H...O hydrogen bonding in 4-phenyl-benzaldehyde: a comprehensive crystallographic, spectroscopic and computational study

The crystal structure of 4-phenyl-benzaldehyde reveals the presence of a dimer linked by the C=O and C( 9)-H groups of adjacent molecules. In the liquid phase, the presence of C-(HO)-O-... bonded forms is revealed by both vibrational and NMR spectroscopy. A Delta H value of - 8.2 +/- 0.5 kJ mol(-1) for the dimerisation equilibrium is established from the temperature-dependent intensities of the bands assigned to the carbonyl-stretching modes. The NMR data suggest the preferential engagement of the C(2,6)-H and C(10/12)/C(11)-H groups as hydrogen bond donors, instead of the C(9)-H group. While ab initio calculations for the isolated dimers are unable to corroborate these NMR results, the radial distribution functions obtained from molecular dynamics simulations show a preference for C(2,6)-H and C(10/12)/C(11)-(HO)-O-... contacts relative to the C(9)-(HO)-O-... ones.

Crystalline structure of mangiferin, a C-glycosyl-substituted 9H-xanthen-9-one isolated from the stem bark of Mangifera indica

The crystalline structure of mangiferin (= 2-beta-D-glucopyranosyl-1,3,6,7-tetrahydroxy-9H-xanthen-9-one; 1), a biologically active xanthenone C-glycoside, isolated from the stem bark of Mangifera indica (Anacardiaceae), was unambiguously determined by single-crystal X-ray diffraction (XRD). The crystal structure is summarized as follows: triclinic, P1, a = 7.6575(5), b = 11.2094(8), c = 11.8749(8) angstrom, alpha = 79.967(5), beta = 87.988(4), gamma = 72.164(4)degrees, V = 955.3(1) angstrom(3), and Z = 2. The structure also shows two molecules in the asymmetric unit cell and five crystallization H2O molecules. The packing is stabilized by several intermolecular H-bonds involving either the two symmetry-independent mangiferin molecules 1a and 1b, or the H2O ones.

Elemental and isotope compositions of lipids, kerogens and asphaltenes from samples of DSDP Hole 41-368

The thermal effects of three (one major and two minor) Miocene diabase intrusions on Cretaceous black shales from DSDP site 41-368 have been analyzed. A concentration gradient was observed, especially for the hydrocarbons, decreasing towards the major intrusion and between the three sills. The thermally-altered samples in the proximity of and between the sills contained elemental sulfur and an excess of thermally-derived pristane over phytane. whereas, the unaltered sediments contained no elemental sulfur, and more phytane than pristane. A maximum yield of the extractable hydrocarbons was observed at a depth of 7 m below the major sill. Two classes of molecular markers were present in this bitumen suite. The first was sesqui-, di- and triterpenoids and steranes. which could be correlated with both terrigenous and autochthonous sources. They were geologically mature and showed no significant changes due to the thermal stress. The second class was found in the altered samples, which contained only polynuclear aromatic hydrocarbons with low alkyl substitution and sulfur and oxygen heterocyclic aromatic compounds. These compounds were derived from pyrolytic reactions during the thermal event. Kerogen was isolated from all of these samples, but only traces of humic substances were present. The H/C, N/C, d13C, d34S and dD all exhibit the expected effects of thermal stress. The kerogen becomes more aromatized and richer in 13C, 34S and D in the proximity of and between the sills. Maturation trends were also measured by the vitrinite reflectance and electron spin resonance, where the thermal stress could be correlated with an elevated country rock temperature and an increased degree of aromaticity. The effects of in situ thermal stress on the organic-rich shales resulted in the generation and expulsion of petroliferous material from the vicinity of the sills.

4-(2,5-Dioxo-2,5-dihydro-1H-pyrrol-1-yl)benzoic acid: X-ray and DFT-calculated structure

In the title compound, C(11)H(7)NO(4), there is a dihedral angle of 45.80 (7)degrees between the planes of the benzene and maleimide rings. The presence of O-H...O hydrogen bonding and weak C-H...O interactions allows the formation of R (3) 3(19) edge-connected rings parallel to the (010) plane. Structural, spectroscopic and theoretical studies were carried out. Density functional theory (DFT) optimized structures at the B3LYP/6-311 G(d,p) and 6-31++G(d,p) levels are compared with the experimentally determined molecular structure in the solid state. Additional IR and UV theoretical studies allowed the presence of functional groups and the transition bands of the system to be identified.