887 resultados para Bias ply tires.
Resumo:
National Highway Traffic Safety Administration, Office of Heavy Duty Vehicle Research, Washington, D.C.
Noise and traction characteristics of bias-ply and radial tires for heavy duty trucks. Final report.
Resumo:
Transportation Department, Office of Noise Abatement, Washington, D.C.
Resumo:
Extensive field testes were conducted using the UCD single wheel tester employing three large radial ply tractor tires in two different soils, four different soil conditions, two axle load levels, and three levels of tire inflation pressures in order to quantify the benefits of using low/correct inflation pressures. During these tests slip, net traction, gross traction, and dynamic axle load were recorded. Furthermore, soil moisture content, cone index, and dry bulk density data were obtained at test locations. The results of the analysis showed a significant increase in net traction and traction efficiency when low/correct inflation was used. Benefits of using low/correct pressure was higher in tilled soil conditions.
Resumo:
Transportation Department, Office of Noise Abatement, Washington, D.C.
Resumo:
A utilização correta de pneus em tratores, tanto em relação ao seu tipo quanto à calibração de sua pressão interna, e a lastragem ideal para cada condição de carga são fatores que influem significativamente no desempenho do trator. Esta pesquisa teve como objetivo comparar o desempenho de um trator equipado com pneus radiais e com pneus diagonais, para três condições de lastragem líquida (0%, 40% e 75% de água), em três condições superficiais de um Nitossolo Vermelho distrófico (superfície firme, preparada e com cobertura vegetal de resto de milho) e em três velocidades teóricas de deslocamento (4 km h-1, 5 km h-1 e 7 km h-1), informadas no painel do trator, correspondendo às marchas B1, B2 e C1. O melhor desempenho do trator, equipado com pneu diagonal, ocorreu na condição de 75% de água nos pneus, apresentando maior velocidade de deslocamento, menor patinhagem do trator, menor consumo horário de combustível e gerando maior potência na barra de tração. Com pneus radiais, o melhor desempenho do trator ocorreu na condição de 40% de água nos pneus, proporcionando maiores velocidades de deslocamento do trator, menores patinhagens, menores consumos, horário e específico de combustível, e maiores potência e rendimento na barra de tração.
Resumo:
The tractor is one of the machines that more traffics over the soil during the processes involving agricultural production. The interaction tractor/soil is made by the tires which, in most of the cases, are pneumatic. The tire type and the tractor travel speed, interfere directly on the pressure over the soil. One of the techniques employed to evaluate the alterations that tractor traffic causes in the soil is to measure its Cone Index. The aim of this research was to evaluate the same Cone Index alterations caused by an agricultural tractor equipped with both radial tires and bias ply tires, trafficking mobilized soil in four different travel speeds. The experiment was performed in a LATOSSOLO VERMELHO, located 22°51' S, 48°25'W and 770 m of altitude, in Botucatu-SP, Brazil. The soil mobilization was performed with a chisel plow and a disc arrow. The traction was accomplished with a John Deere tractor, model 6600, with 88 kW of power and 6,723 kg. Equipment requiring a force of 25kN was traced by the tractor draw bar. The experimental design was in randomized blocks with 4 × 2 factorial arrangements, with two distinct treatments corresponding to the types of tires (bias and radial) and the four travel speeds, with six replications. There were selected the following speeds: 3.5, 3.9, 5.1 and 5.9 km h-1. To determine the soil resistance, there was utilized MSSU - Mobile Soil Sampling Unit, with which the Cone Index was obtained in layers from 0-100, 100-200, 200-300, 300-400, 400-500 and over 500 mm deep. The Cone Index where evaluated in areas with non contact between tire and soil (ICn) and in the tire footprint track (ICp). There were calculated the Cone Index increments caused by the tractor tire (AIC) and the results showed that as the tractor travel speed increased, there were observed decrements in the medium values of cone index. The radial tire provided smaller values of the Cone Index in the superficial layer of the soil (0 to 100 mm) in relation to the bias ply tire, when the speed was approximately 6 km h-1. The increment in the Cone Index, promoted by the tractor, was more intense in the first 200 mm depth, but it also reached the layer from 200 to 300 mm.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
The objective of this work was to compare the performance of a tractor equipped with used and new bias-ply tires (63.4% and 41.2%, front and rear tire waste, respectively), in three surface conditions: tillage soil, vegetal covered soil and firm soil. Field data were collected to calculate: forward speed, front and rear slippage tires, drawbar pull, available power at drawbar bar and fuel consumption. Results showed that both, tires and soil conditions, changed tractor capacity on developing drawbar traction. The worst performance was observed on tillage soil. The best performance of the tractor was observed at firm soil track. On the track with tilled soil, results showed that the forward speed was the lowest among the three soil conditions due to the front and rear slippage tires which was higher than vegetal covered and firm soil tracks. Fuel consumption results showed higher values on tilled tracks when compared with firm and vegetal covered tracks. The fuel consumption levels evaluated on bias-ply tires lead to significant changes on tractor’s performance at tilled soil, indicating that, at this condition, it’s necessary to replace the used tires by new tires. For vegetal covered soil operations, and also on firm soil conditions, used tires, at studied levels, indicated that these tires might still be used without tractor performance changing.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
O trabalho comparou o desempenho de um trator agrícola 4x2 TDA de 89 kW (121cv) em função do tipo de pneus (radial, diagonal e de baixa pressão), a condição de lastragem (com e sem água nos pneus) e quatro velocidades [V1 (1,84km h-1), V2 (3,18km h-1, V3 (4,57km h-1), V4 (5,04km h-1)]. O experimento foi realizado na UNESP-Jaboticabal-SP, em condição de preparo do solo com escarificador de sete hastes a 30cm de profundidade. Os pneus foram do tipo R1, com as seguintes características: [radial (dianteiros-14.9 R 26; traseiros-620/75 R 30) diagonal (dianteiros-14.9-26, traseiros-23.1-30) e BPAF (dianteiros-500/60-26.5; traseiros-700/55-34)]. O delineamento experimental foi blocos casualizados, em esquema fatorial 3x2x4, com 24 tratamentos e três repetições. Os resultados evidenciaram vantagens para o trator equipado com pneus radiais.
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.
Resumo:
Mode of access: Internet.
Resumo:
National Highway Traffic Safety Administration, Washington, D.C.