Utilization of biodiesel-derived glycerol or xylose for increased growth and lipid production by indigenous microalgae

The use of industrial wastes rich in mineral nutrients and carbon sources to increase the final microalgal biomass and lipid yield at a low cost is an important strategy to make algal biofuel technology viable. Using strains from the microalgal collection of the Université de Montréal, this report shows for the first time that microalgal strains can be grown on xylose, the major carbon source found in wastewater streams from pulp and paper industries, with an increase in growth rate of 2.8 fold in comparison to photoautotrophic growth, reaching up to µ=1.1/day. On glycerol, growth rates reached as high as µ=1.52/day. Lipid productivity increased up to 370% on glycerol and 180% on xylose for the strain LB1H10, showing the suitability of this strain for further development for biofuels production through mixotrophic cultivation.

Biotechnological Utilization of Biodiesel-Derived Glycerol for the Production of Ribonucleotides and Microbial Biomass

Ten yeast strains were evaluated concerning their capabilities to assimilate biodiesel-derived glycerol in batch cultivation. The influence of glycerol concentration, temperature, pH and yeast extract concentration on biomass production was studied for the yeast selected. Further, the effect of agitation on glycerol utilization by the yeast Hansenula anomala was also studied. The yeast H. anomala CCT 2648 showed the highest biomass yield (0.30 g g(-1)) and productivity (0.19 g L-1 h(-1)). Citric acid, succinic acid, acetic acid and ethanol were found as the main metabolites produced. The increase of yeast extract concentration from 1 to 3 g L-1 resulted in high biomass production. The highest biomass concentration (21 g L-1), yield (0.45 g g(-1)) and productivity (0.31 g L-1 h(-1)), as well as ribonucleotide production (13.13 mg g(-1)), were observed at 700 rpm and 0.5 vvm. These results demonstrated that glycerol from biodiesel production process showed to be a feasible substrate for producing biomass and ribonucleotides by yeast species.

Effect of impurities in biodiesel-derived waste glycerol on the performance and feasibility of biotechnological processes

The rapid development of biodiesel production technology has led to the generation of tremendous quantities of glycerol wastes, as the main by-product of the process. Stoichiometrically, it has been calculated that for every 100 kg of biodiesel, 10 kg of glycerol are produced. Based on the technology imposed by various biodiesel plants, glycerol wastes may contain numerous kinds of impurities such as methanol, salts, soaps, heavy metals and residual fatty acids. This fact often renders biodiesel-derived glycerol unprofitable for further purification. Therefore, the utilization of crude glycerol though biotechnological means represents a promising alternative for the effective management of this industrial waste. This review summarizes the effect of various impurities-contaminants that are found in biodiesel-derived crude glycerol upon its conversion by microbial strains in biotechnological processes. Insights are given concerning the technologies that are currently applied in biodiesel production, with emphasis to the impurities that are added in the composition of crude glycerol, through each step of the production process. Moreover, extensive discussion is made in relation with the impact of the nature of impurities upon the performances of prokaryotic and eukaryotic microorganisms, during crude glycerol bioconversions into a variety of high added-value metabolic products. Finally, aspects concerning ways of crude glycerol treatment for the removal of inhibitory contaminants as reported in the literature are given and comprehensively discussed

Glycerine derived from biodiesel production as a feedstuff for broiler diets

The performance, carcass traits, and litter humidity of broilers fed increasing levels of glycerine derived from biodiesel production were evaluated. In this experiment, 1,575 broilers were distributed according to a completely randomized experimental design into five treatments with seven replicates of 45 birds each. Treatments consisted of a control diet and four diets containing 2.5, 5.0, 7.5, or 10% glycerine. The experimental diets contained equal nutritional levels and were based on corn, soybean meal and soybean oil. The glycerine included in the diets contained 83.4% glycerol, 1.18% sodium, and 208 ppm methanol, and a calculated energy value of 3,422 kcal AMEn/kg. Performance parameters (weight gain, feed intake, feed conversion ratio, live weight, and livability) were monitored when broilers were 7, 21, and 42 days of age. On day 43, litter humidity was determined in each pen, and 14 birds/treatment were sacrificed for the evaluation of carcass traits. During the period of 1 to 7 days, there was a positive linear effect of the treatments on weight gain, feed intake, and live weight gain. Livability linearly decreased during the period of 1 to 21 days. During the entire experimental period, no significant effects were observed on performance parameters or carcass traits, but there was a linear increase in litter humidity. Therefore, the inclusion of up to 5% glycerine in the diet did not affect broiler performance during the total rearing period.

Determination of free glycerol in biodiesel at a platinum oxide surface using potential cycling technique

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Combustion and emission characteristics of a typical biodiesel engine operated on waste cooking oil derived biodiesel

Waste cooking oils can be converted into fuels to provide economical and environmental benefits. One option is to use such fuels in stationary engines for electricity generation, co-generation or tri-generation application. In this study, biodiesel derived from waste cooking oil was tested in an indirect injection type 3-cylinder Lister Petter biodiesel engine. We compared the combustion and emission characteristics with that of fossil diesel operation. The physical and chemical properties of pure biodiesel (B100) and its blends (20% and 60% vol.) were measured and compared with those of diesel. With pure biodiesel fuel, full engine power was achieved and the cylinder gas pressure diagram showed stable operation. At full load, peak cylinder pressure of B100 operation was almost similar to diesel and peak burn rate of combustion was about 13% higher than diesel. For biodiesel operation, occurrences of peak burn rates were delayed compared to diesel. Fuel line injection pressure was increased by 8.5-14.5% at all loads. In comparison to diesel, the start of combustion was delayed and 90% combustion occurred earlier. At full load, the total combustion duration of B100 operation was almost 16% lower than diesel. Biodiesel exhaust gas emissions contained 3% higher CO2 and 4% lower NOx, as compared to diesel. CO emissions were similar at low load condition, but were decreased by 15 times at full load. Oxygen emission decreased by around 1.5%. Exhaust gas temperatures were almost similar for both biodiesel and diesel operation. At full engine load, the brake specific fuel consumption (on a volume basis) and brake thermal efficiency were respectively about 2.5% and 5% higher compared to diesel. Full engine power was achieved with both blends, and little difference in engine performance and emission results were observed between 20% and 60% blends. The study concludes that biodiesel derived from waste cooking oil gave better efficiency and lower NOx emissions than standard diesel. Copyright © 2012 SAE International.

Os instrumentos de incentivo à produção e uso de biodiesel no Brasil: uma análise constitucional sob o princípio do desenvolvimento sustentável

The recent insertion of biodiesel derived from oily vegetables in the Brazilian energetic matrix calls for the study of some aspects that belong to it. The analysis of the carbonized energetic pattern concerns the paradigm of economic development that is constitutionally enshrined sustainable development which make environmental protection compatible with the needs of the economic rationality. This text is structured according to the ideas of modern hermeneutic that sees substantial value in the principles capable of create a harmonious relationship between law and society. The study of the constitutional principles to conduct a legal analysis about the National Program for Production and Use of Biodiesel - PNPB. The aim of the research is the study of PNPB ahead with the constitutional principles governing the economic order. To achieve this end we studied the sustainable development as a constitutional principle. We start with the notion that the thematic principles, and fundamental to understanding the dimension of sustainable development institute, since its concept is closely related to the applications of the principles enshrined in virtually all the constitutional order of the Western world. Then this was the National Energy Policy, initiating the approach by guiding principles of the National Energy Policy to develop the theme of public policy in the energy sector. Therefore, we studied the National Program of Biodiesel Production and Use - PNPB. From a technical introduction to the concept of biodiesel and a brief historical background, analyzing their advantages compared to fossil fuels predominantly used. Then it became a regulatory overview of the Brazilian legislation on the subject, central to understanding the plans and objectives pursued by the Brazilian government with encouraging the production of biodiesel. Finally discussed the tax incentives for production and use of biodiesel in Brazil. From the idea of federalism, characterized the tax as an instrument of state intervention in the economy. And finally it brought the tax incentives of Law No. 11.116/2005 in the face of the constitutional principles of economy and tax, and tax incentives from projects related to the Kyoto Protocol

Genotoxicity assessment of water soluble fractions of biodiesel and its diesel blends using the Salmonella assay and the in vitro MicroFlow (R) kit (Litron) assay

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lipase production by Botryosphaeria ribis EC-01 on soybean and castorbean meals: Optimization, immobilization, and application for biodiesel production

The effects of soybean and castorbean meals were evaluated separately, and in combinations at different ratios, as substrates for lipase production by Botryosphaeria ribis EC-01 in submerged fermentation using only distilled water. The addition of glycerol analytical grade (AG) and glycerol crude (CG) to soybean and castorbean meals separately and in combination, were also examined for lipase production. Glycerol-AG increased enzyme production, whereas glycerol-CG decreased it. A 24 factorial design was developed to determine the best concentrations of soybean meal, castorbean meal, glycerol-AG, and KH2PO4 to optimize lipase production by B. ribis EC-01. Soybean meal and glycerol-AG had a significant effect on lipase production, whereas castorbean meal did not. A second treatment (22 factorial design central composite) was developed, and optimal lipase production (4,820 U/g of dry solids content (ds)) was obtained when B. ribis EC-01 was grown on 0.5 % (w/v) soybean meal and 5.2 % (v/v) glycerol in distilled water, which was in agreement with the predicted value (4,892 U/g ds) calculated by the model. The unitary cost of lipase production determined under the optimized conditions developed ranged from US$0.42 to 0.44 based on nutrient costs. The fungal lipase was immobilized onto Celite and showed high thermal stability and was used for transesterification of soybean oil in methanol (1:3) resulting in 36 % of fatty acyl alkyl ester content. The apparent K m and V max were determined and were 1.86 mM and 14.29 μmol min -1 mg-1, respectively. © 2013 Springer Science+Business Media New York.

Estudo das variáveis operacionais dos processos de separação na produção de biodiesel, a partir do óleo de palma bruto (Elaeis guineensis, Jacq) em escala de laboratório

Neste trabalho investigaram-se de forma sistemática as variáveis operacionais de processo envolvidas nas operações de separação aplicadas no pré-tratamento do óleo de palma bruto (Elaeis guineensis, jacq) e na purificação do biodiesel produzido via transesterificação etanólica utilizando NaOH como catalisador, em escala de laboratório. Na etapa de pré-tratamento foram investigados os processos de Filtração e Decantação, sendo a filtração do produto da neutralização realizada a 40ºC, 50ºC e 60ºC, enquanto que na Decantação, avaliaram-se as temperaturas de 40ºC e 60ºC em 120 minutos. Em seguida, investigou-se a influência do tempo de decantação de 60, 90 e 120 minutos no processo de lavagem do óleo neutralizado a 40ºC e 60ºC, seguida de Desidratação sob vácuo a 80ºC, tendo sido investigado nesta etapa a influência da pressão. Após a reação de transesterificação, avaliou-se o processo de Evaporação do etanol em excesso, onde em um primeiro momento investigou-se as temperaturas de 70 e 80ºC, mantendo-se o tempo de evaporação constante em 20 minutos, no intervalo de 613,30 a 80,00 mbar, e em um segundo momento analisou-se as pressões de operação de 480,00 e 346,66 mbar. Em seguida, investigou-se a influência do tempo no processo de decantação da fase rica em glicerol a 70ºC, para tempos de 60, 120 e 180 minutos. Sendo realizada a lavagem da fase rica em ésteres a 70ºC, para os tempos de 60, 90 e 120 minutos de decantação da água residual. Avaliou-se ainda a eficiência do processo de centrifugação da mistura biodiesel e glicerol a 60 e 70ºC a 2000 rpm, para um tempo de 15 minutos. Em seguida, procedeu-se a lavagem da fase rica em ésteres com água a 60 e 70ºC, sendo a separação realizada via centrifugação a 60 e 70ºC. As fases ricas em ésteres, obtidas via decantação e centrifugação, foram submetidas à Desidratação sob vácuo, e caracterizadas em conformidade com as especificações da ANP. De acordo com os resultados experimentais, com base na qualidade do óleo neutro e rendimento do processo, observou-se que a Filtração a 50ºC gerou os melhores resultados para o pré-tratamento do óleo. Em relação à Evaporação do etanol, o melhor percentual de recuperação foi obtido a 80ºC e 346,6 mbar. Com relação à separação da fase ricas em ésteres e glicerol, o processo de Centrifugação a 60ºC gerou um biodiesel de melhor qualidade e maior rendimento. Observou-se ainda, a necessidade de uma segunda etapa de centrifugação de forma a minimizar a perdas de biodiesel na fase rica em glicerol.

Desenvolvimento e teste de um sistema para separação automática das fases glicerol-biodiesel utilizando sensor de condutividade elétrica

Pós-graduação em Engenharia Mecânica - FEIS

Genotoxicity assessment of water soluble fractions of biodiesel and its diesel blends using the Salmonella assay and the in vitro MicroFlow (R) kit (Litron) assay

The designation of biodiesel as an environmental-friendly alternative to diesel oil has improved its commercialization and use. However, most biodiesel environmental safety studies refer to air pollution and so far there have been very few literature data about its impacts upon other biotic systems, e.g. water, and exposed organisms. Spill simulations in water were carried out with neat diesel and biodiesel and their blends aiming at assessing their genotoxic potentials should there be contaminations of water systems. The water soluble fractions (WSF) from the spill simulations were submitted to solid phase extraction with C-18 cartridge and the extracts obtained were evaluated carrying out genotoxic and mutagenic bioassays [the Salmonella assay and the in vitro MicroFlow (R) kit (Litron) assay]. Mutagenic and genotoxic effects were observed, respectively, in the Salmonella/microsome preincubation assay and the in vitro MN test carried out with the biodiesel WSF. This interesting result may be related to the presence of pollutants in biodiesel derived from the raw material source used in its production chain. The data showed that care while using biodiesel should be taken to avoid harmful effects on living organisms in cases of water pollution. (C) 2011 Elsevier Ltd. All rights reserved.