896 resultados para Android,Peer to Peer,Wifi,Mesh Network
Resumo:
L'utilizzo di percorsi non centralizzati per la comunicazione tra dispositivi mobili presenta notevoli vantaggi, tra i quali una maggiore sicurezza e segretezza e l'indipendenza da infrastrutture esterne (Internet). Gli studi e le implementazioni di questo tipo di funzionalità stanno emergendo recentemente di pari passo con i traguardi raggiunti nel campo della tecnologia mobile, ma si trovano ancora in uno stato sperimentale e poco fruibile in pratica. È stata sviluppata come proof of work un'applicazione che permette di diffondere messaggi tra dispositivi mobili senza connessione a internet, sfruttando un sistema di comunicazione (quasi) peer to peer. Viene descritta in generale l'architettura e il funzionamento dell'applicazione insieme a dei possibili casi d'uso. Inoltre vengono mostrati i metodi vagliati ed effettivamente utilizzati per implementare questo tipo di comunicazione, insieme ad altre caratteristiche secondarie (crittografia). Il risultato conseguito è a tutti gli effetti funzionante e viene ritenuto la soluzione migliore possibile tra tutte quelle trovate, ma presenta comunque diversi difetti. La conclusione raggiunta è che lo stato attuale dell'arte non permetta di raggiungere lo scopo prefissato in maniera ottimale, in quanto è necessario ricorrere a metodi poco funzionali a causa della mancanza di supporto alle tecnologie necessarie.
Resumo:
Recognizing the potentially ruinous effect of negative reviews on the reputation of the hosts as well as a subjective nature of the travel experience judgements, peer-to-peer accommodation sharing plat-forms, like Airbnb, have readily embraced the “response” option, empowering hosts with the voice to challenge, deny or at least apologize for the subject of critique. However, the effects of different re-sponse strategies on trusting beliefs towards the host remain unclear. To fill this gap, this study focus-es on understanding the impact of different response strategies and review negativity on trusting be-liefs towards the host in peer-to-peer accommodation sharing setting utilizing experimental methods. Examination of two different contexts, varying in the controllability of the subject of complaint, re-veals that when the subject of complaint is controllable by a host, such strategies as confession / apol-ogy and denial can improve trusting beliefs towards the host. However, when the subject of criticism is beyond the control of the host, denial of the issue does not yield guest’s confidence in the host, where-as confession and excuse have positive influence on trusting beliefs.
Resumo:
En el projecte ens centrarem en el funcionament de les Xarxes mallades sense fils, es fa una breu explicació de les xarxes Ad-hoc, ja que aquestes formen un part important dintre d’una xarxa Mesh. S’explicaran diversos protocols d’enrutament com ara BATMAN, AODV, 802.11s i OLSR. Aquest últim és el que utilitzarem per a la configuració de la xarxa que realitzarem. S’explicarà el tipus de paquets que s’envien entre els nodes perquè el funcionament de la xarxa sigui òptim i tots els clients puguin tenir-hi accés i estiguin connectats entre ells. Al finalitzar l’estudi teòric d’aquest tipus de xarxa i veure les seves avantatges i desavantatges respecte altres tipus de xarxes sense fils, es muntaran dos petites xarxa. Per a muntar-les utilitzarem de Punts d’Accés els nodes Ubuquiti Nanoestation LocoM2. Una de les xarxes serà al poble Bellcaire d’Urgell, on és connectaran tres cases, on només una te accés a Internet i els nodes estaran connectats en línia, es a dir, del Node1 – Node2 – Node3. La segona serà a una casa de Barcelona on mitjançant els tres nodes obtindrem una connexió d’Internet a tota la casa, en aquest cas els tres nodes estaran connectats els tres formant un cercle, es a dir, Node1-Node2-Node3-Node1. Finalment, és mirarà una proposta de futur, on es parlaria amb l’Ajuntament del poble on s’ha fet la primera proba per realitzar una Xarxa mallada sense fils a tots els llocs públics del poble.
Resumo:
Birds are vulnerable to collisions with human-made fixed structures. Despite ongoing development and increases in infrastructure, we have few estimates of the magnitude of collision mortality. We reviewed the existing literature on avian mortality associated with transmission lines and derived an initial estimate for Canada. Estimating mortality from collisions with power lines is challenging due to the lack of studies, especially from sites within Canada, and due to uncertainty about the magnitude of detection biases. Detection of bird collisions with transmission lines varies due to habitat type, species size, and scavenging rates. In addition, birds can be crippled by the impact and subsequently die, although crippling rates are poorly known and rarely incorporated into estimates. We used existing data to derive a range of estimates of avian mortality associated with collisions with transmission lines in Canada by incorporating detection, scavenging, and crippling biases. There are 231,966 km of transmission lines across Canada, mostly in the boreal forest. Mortality estimates ranged from 1 million to 229.5 million birds per year, depending on the bias corrections applied. We consider our most realistic estimate, taking into account variation in risk across Canada, to range from 2.5 million to 25.6 million birds killed per year. Data from multiple studies across Canada and the northern U.S. indicate that the most vulnerable bird groups are (1) waterfowl, (2) grebes, (3) shorebirds, and (4) cranes, which is consistent with other studies. Populations of several groups that are vulnerable to collisions are increasing across Canada (e.g., waterfowl, raptors), which suggests that collision mortality, at current levels, is not limiting population growth. However, there may be impacts on other declining species, such as shorebirds and some species at risk, including Alberta’s Trumpeter Swans (Cygnus buccinator) and western Canada’s endangered Whooping Cranes (Grus americana). Collisions may be more common during migration, which underscores the need to understand impacts across the annual cycle. We emphasize that these estimates are preliminary, especially considering the absence of Canadian studies.
Resumo:
Este proyecto de fin de grado pretende demostrar la importancia y la utilidad de la creación de redes de dispositivos móviles conectados entre sí. Para ello se explicarán varios tipos de redes inalámbricas que permiten estas conexiones directas entre dispositivos sin la necesidad de un servidor. En estas redes inalámbricas se destacan las redes P2P y las redes Ad-hoc, las cuales se explicarán posteriormente. El despliegue de estas redes se puede encontrar en un amplio rango de campos como puede ser la agricultura, la medicina e incluso en el ámbito militar. Es objetivo de este proyecto, además, el estudio de la tecnología Wi-Fi Direct creada por la Wi-Fi Alliance. Como se explicará a lo largo del proyecto, Wi-Fi Direct está basado en las redes P2P. Esta tecnología permite a los dispositivos cercanos crear redes P2P a través de la red Wi-Fi sin la necesidad de un punto de acceso a Internet. Por otro lado, una gran cantidad de los dispositivos móviles que existen actualmente poseen el sistema operativo Android. Android ha incorporado en sus dispositivos más recientes la tecnología Wi-Fi Direct. Debido a ello han ido surgiendo aplicaciones que usando esta tecnología consiguen desde enviar ficheros hasta indicar la localización de un usuario. Esta tecnología combinada con este tipo de dispositivos puede ser muy útil para utilizar en casos de emergencia donde las infraestructuras de comunicaciones no estén disponibles ya que al no necesitar un punto de acceso a internet es posible la comunicación entre un usuario en peligro y otro que se encuentre dentro de un radio cercano. Por estos motivos otro de los principales objetivos de este proyecto es la implementación de una aplicación para dispositivos Android que use la tecnología Wi-Fi Direct para realizar varias funcionalidades diferentes, como es el intercambio de ficheros entre dispositivos y la creación de un chat para la comunicación simultanea entre dos dispositivos. Con esto se pretende conocer mejor el funcionamiento de la tecnología Wi-Fi Direct y demostrar su utilidad en los dispositivos móviles como son los dispositivos Android. ABSTRACT. This final degree Project tries to demonstrate the importance and utility of networking mobile devices. For this purpose several types of wireless networks will be explained. These networks allow direct connections between devices. The most prominent Wireless networks are P2P and Ad-hoc which will be explained later. The use of these networks can be found in a wide range of fields such as agriculture medicine, and even in the military sector. Besides, other aim of this project is the study of Wi-Fi Direct Technology which is created by Wi-Fi Alliance. As it explained along the project, Wi-Fi Direct is based on P2P networks. This technology lets nearby devices create P2P networks through Wi-Fi network without an Internet access point. On the other hand, a large number of mobile devices have the Android OS. Android has integrated Wi-Fi Direct technology in its latest devices. Because of this applications have emerged that using this technology they get from sending files to send the user’s location. This technology combined with these devices can be very useful to use in emergencies where communications infrastructures are not available. Since not need an Internet access point, communication between a user in danger and another within close radius is possible. For these reasons another of the main aims of this project is the implementation of an application for Android devices which use Wi-Fi Direct technology to perform several different functionalities, such as file exchange or chat for simultaneous communication between devices. This is intended to better understand the operation of Wi-Fi Direct technology and prove its utility on mobile devices such as Android devices.
Resumo:
Wireless mesh networks present an attractive communication solution for various research and industrial projects. However, in many cases, the appropriate preliminary calculations which allow predicting the network behavior have to be made before the actual deployment. For such purposes, network simulation environments emulating the real network operation are often used. Within this paper, a behavior comparison of real wireless mesh network (based on 802.11s amendment) and the simulated one has been performed. The main objective of this work is to measure performance parameters of a real 802.11s wireless mesh network (average UDP throughput and average one-way delay) and compare the derived results with characteristics of a simulated wireless mesh network created with the NS-3 network simulation tool. Then, the results from both networks are compared and the corresponding conclusion is made. The corresponding results were derived from simulation model and real-worldtest-bed, showing that the behavior of both networks is similar. It confirms that the NS-3 simulation model is accurate and can be used in further research studies.
Resumo:
We developed UAVNet, a framework for the autonomous deployment of a flying Wireless Mesh Network using small quadrocopter-based Unmanned Aerial Vehicles (UAVs). The flying wireless mesh nodes are automatically interconnected to each other and building an IEEE 802.11s wireless mesh network. The implemented UAVNet prototype is able to autonomously interconnect two end systems by setting up an airborne relay, consisting of one or several flying wireless mesh nodes. The developed software includes basic functionality to control the UAVs and to setup, deploy, manage, and monitor a wireless mesh network. Our evaluations have shown that UAVNet can significantly improve network performance.
Resumo:
Over the past several years the topics of energy consumption and energy harvesting have gained significant importance as a means for improved operation of wireless sensor and mesh networks. Energy-awareness of operation is especially relevant for application scenarios from the domain of environmental monitoring in hard to access areas. In this work we reflect upon our experiences with a real-world deployment of a wireless mesh network. In particular, a comprehensive study on energy measurements collected over several weeks during the summer and the winter period in a network deployment in the Swiss Alps is presented. Energy performance is monitored and analysed for three system components, namely, mesh node, battery and solar panel module. Our findings cover a number of aspects of energy consumption, including the amount of load consumed by a mesh node, the amount of load harvested by a solar panel module, and the dependencies between these two. With our work we aim to shed some light on energy-aware network operation and to help both users and developers in the planning and deployment of a new wireless (mesh) network for environmental research.
Resumo:
The digital revolution of the 21st century contributed to stem the Internet of Things (IoT). Trillions of embedded devices using the Internet Protocol (IP), also called smart objects, will be an integral part of the Internet. In order to support such an extremely large address space, a new Internet Protocol, called Internet Protocol Version 6 (IPv6) is being adopted. The IPv6 over Low Power Wireless Personal Area Networks (6LoWPAN) has accelerated the integration of WSNs into the Internet. At the same time, the Constrained Application Protocol (CoAP) has made it possible to provide resource constrained devices with RESTful Web services functionalities. This work builds upon previous experience in street lighting networks, for which a proprietary protocol, devised by the Lighting Living Lab, was implemented and used for several years. The proprietary protocol runs on a broad range of lighting control boards. In order to support heterogeneous applications with more demanding communication requirements and to improve the application development process, it was decided to port the Contiki OS to the four channel LED driver (4LD) board from Globaltronic. This thesis describes the work done to adapt the Contiki OS to support the Microchip TM PIC24FJ128GA308 microprocessor and presents an IP based solution to integrate sensors and actuators in smart lighting applications. Besides detailing the system’s architecture and implementation, this thesis presents multiple results showing that the performance of CoAP based resource retrievals in constrained nodes is adequate for supporting networking services in street lighting networks.
Resumo:
Understanding how wildlife responds to road and traffic is essential for effective conservation. Yet, not many studies have evaluated how roads influence wildlife in protected areas, particularly within the large iconic African National Parks where tourism is mainly based on sightings from motorized vehicles with the consequent development and intense use of roads. To reduce this knowledge gap, we studied the behavioral response and local spatial distribution of impala Aepyceros melampus along the heterogeneous (with variation in road surface type and traffic intensity) road-network of Kruger National Park (KNP, South Africa). We surveyed different types of roads (paved and unpaved) recording the occurrence of flight responses among sighted impala and describing their local spatial distribution (in relation to the roads). We observed relatively few flight responses (19.5% of 118 observations), suggesting impalas could be partly habituated to vehicles in KNP. In addition, impala local distribution is apparently unaffected by unpaved roads, yet animals seem to avoid the close proximity of paved roads. Overall, our results suggest a negative, albeit small, effect of traffic intensity, and of presence of pavement on roads on the behavior of impala at KNP. Future studies would be necessary to understand how roads influence other species, but our results show that even within a protected area that has been well-visited for a long time, wildlife can still be affected by roads and traffic. This result has ecological (e.g., changes in spatial distribution of fauna) and management implications (e.g., challenges of facilitating wildlife sightings while minimizing disturbance) for protected areas where touristic activities are largely based on driving.
Resumo:
Differently from theoretical scale-free networks, most real networks present multi-scale behavior, with nodes structured in different types of functional groups and communities. While the majority of approaches for classification of nodes in a complex network has relied on local measurements of the topology/connectivity around each node, valuable information about node functionality can be obtained by concentric (or hierarchical) measurements. This paper extends previous methodologies based on concentric measurements, by studying the possibility of using agglomerative clustering methods, in order to obtain a set of functional groups of nodes, considering particular institutional collaboration network nodes, including various known communities (departments of the University of Sao Paulo). Among the interesting obtained findings, we emphasize the scale-free nature of the network obtained, as well as identification of different patterns of authorship emerging from different areas (e.g. human and exact sciences). Another interesting result concerns the relatively uniform distribution of hubs along concentric levels, contrariwise to the non-uniform pattern found in theoretical scale-free networks such as the BA model. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
Several positioning techniques have been developed to explore the GPS capability to provide precise coordinates in real time. However, a significant problem to all techniques is the ionosphere effect and the troposphere refraction. Recent researches in Brazil, at São Paulo State University (UNESP), have been trying to tackle these problems. In relation to the ionosphere effects it has been developed a model named Mod_Ion. Concerning tropospheric refraction, a model of Numerical Weather Prediction(NWP) has been used to compute the zenithal tropospheric delay (ZTD). These two models have been integrated with two positioning methods: DGPS (Differential GPS) and network RTK (Real Time Kinematic). These two positioning techniques are being investigated at São Paulo State University (UNESP), Brazil. The in-house DGPS software was already finalized and has provided very good results. The network RTK software is still under development. Therefore, only preliminary results from this method using the VRS (Virtual Reference Station) concept are presented.
Resumo:
The simulated annealing optimization technique has been successfully applied to a number of electrical engineering problems, including transmission system expansion planning. The method is general in the sense that it does not assume any particular property of the problem being solved, such as linearity or convexity. Moreover, it has the ability to provide solutions arbitrarily close to an optimum (i.e. it is asymptotically convergent) as the cooling process slows down. The drawback of the approach is the computational burden: finding optimal solutions may be extremely expensive in some cases. This paper presents a Parallel Simulated Annealing, PSA, algorithm for solving the long term transmission network expansion planning problem. A strategy that does not affect the basic convergence properties of the Sequential Simulated Annealing algorithm have been implementeded and tested. The paper investigates the conditions under which the parallel algorithm is most efficient. The parallel implementations have been tested on three example networks: a small 6-bus network, and two complex real-life networks. Excellent results are reported in the test section of the paper: in addition to reductions in computing times, the Parallel Simulated Annealing algorithm proposed in the paper has shown significant improvements in solution quality for the largest of the test networks.
Resumo:
In this paper a method for solving the Short Term Transmission Network Expansion Planning (STTNEP) problem is presented. The STTNEP is a very complex mixed integer nonlinear programming problem that presents a combinatorial explosion in the search space. In this work we present a constructive heuristic algorithm to find a solution of the STTNEP of excellent quality. In each step of the algorithm a sensitivity index is used to add a circuit (transmission line or transformer) to the system. This sensitivity index is obtained solving the STTNEP problem considering as a continuous variable the number of circuits to be added (relaxed problem). The relaxed problem is a large and complex nonlinear programming and was solved through an interior points method that uses a combination of the multiple predictor corrector and multiple centrality corrections methods, both belonging to the family of higher order interior points method (HOIPM). Tests were carried out using a modified Carver system and the results presented show the good performance of both the constructive heuristic algorithm to solve the STTNEP problem and the HOIPM used in each step.