Evolution of the functional properties of titanium–silver thin films for biomedical applications: Influence of in-vacuum annealing

In this work, the thermal stability of TiAgx thin films, deposited by magnetron sputtering, was evaluated, envisaging their application in biomedical devices, namely as electrodes for biosignal acquisition. Based on the composition and microstructural characterization, a set of four representative TiAgx thin films was selected in order to infer whether they are thermally stable in terms of functional properties. In order to achieve this purpose, the structural and morphological evolution of the films with annealing temperature was correlated with their electrical, mechanical and thermal properties. Two distinct zones were identified and two samples from each zone were extensively analysed. In the first zone (zone I), Ti was the main component (Ti-rich zone) while in the second, zone II, the Ag content was more significant. The selected samples were annealed in vacuum at four different temperatures up to 500 oC. For the samples produced within zone I, small microstructural changes were observed due to the recrystallization of the Ti structure and grain size increment. Also, no significant changes were observed with annealing temperature regarding the f l ’ functional properties, being thermally stable up to 500 oC. For higher Ag contents (zone II) the energy supplied by thermal treatments was sufficient to activate the crystallization of Ti-Ag intermetallic phases. A strong increase of the grain size of these phases was also reported. The structural and morphological organization proved to be determinant for the physical responses of the TiAgx system. The hardness and Y g’s modulus were significantly improved with the formation of the intermetallic phases. The silver addition and annealing treatments also played an important role in the electrical conductivity of the films, which was once again improved by the formation of Ti-Ag phases. The thermal diffusivity of the films was practically unchanged with the heat-treatment. This set of results shows that this intermetallic-like thin film system has good thermal stability up to high temperatures (as high as 500 oC), which in case of the highest Ag content zone is particularly evident for electrical and mechanical properties, showing an important improvement. Hardness increases about three times, while resistivity values become half of those from the lowest Ag contents zone. These set of characteristics are consistent with the targeted applications, namely in terms of biomedical sensing devices.

Den 6 Maj Festkantat till Johann Ludwig Runebergs minne [Partituuri]

Soitinnus: sekakuoro, orkesteri.

Talleres en el aula.

El centro realizador no existe en la actualidad.

The influence of zero-value subtraction on the performance of two laser fluorescence devices for detecting occlusal caries in

Background. The aim of this study was to evaluate the influence of zero-value subtraction on the performance of two laser fluorescence (LF) devices developed to 'detect occlusal caries.Methods. The authors selected 119 permanent molars. Two examiners assessed three areas (cuspal, middle and cervical) of both mesial and distal portions of the buccal surface and one occlusal site using an LF device and an LF pen. For each tooth, the authors subtracted the value measured in the cuspal, middle and cervical areas in the buccal surface from the value measured in the respective occlusal site.Results. The authors observed differences among the readings for both devices in the cuspal, middle and cervical areas in the buccal surface as well as differences for both devices with and without the zero-value subtraction in the occlusal surface. When the authors did not perform the zero-value subtraction, they found statistically significant differences for sensitivity and accuracy far the LF device. When this was done with the LF pen, specificity increased and sensitivity decreased significantly.Conclusions. For the LF device, the zero-value subtraction decreased the sensitivity. For this reason, the authors concluded that clinicians can obtain measures with the LF device effectively without using zero-value subtraction. For the LF pen, however, the absence of the zero-value subtraction changed both the Sensitivity and specificity, and so the authors concluded that clinicians should not eliminate this step from the procedure.Clinical Implications. When using the LF device, clinicians might not need to perform the zero-value subtraction; however, for the LF pen, clinicians should do so.

Rehabilitation with forage grasses of an area degraded by urban solid waste deposits

Dry matter yield and chemical composition of forage grasses harvested from an area degraded by urban solid waste deposits were evaluated. A split-plot scheme in a randomized block design with four replicates was used, with five grasses in the plots and three harvests in the subplots. The mineral content and extraction and heavy metal concentration were evaluated in the second cut, using a randomized block design with five grasses and four replicates. The grasses were Brachiaria decumbens cv. Basilisk, Brachiaria ruziziensis, Brachiaria brizantha cv. Marandu and cv. Xaraés, and Panicum maximum cv. Tanzânia, cut at 42 days of regrowth. The dry matter yield per cut reached 1,480 kg ha-1; the minimum crude protein content was 9.5% and the average neutral detergent fiber content was 62.3%. The dry matter yield of grasses was satisfactory, and may be an alternative for rehabilitating areas degraded by solid waste deposits. The concentration of heavy metals in the plants was below toxicity levels; the chemical composition was appropriate, except for phosphorus. The rehabilitated areas may therefore be used for grazing.

The EU as an Effective Trade Power? Strategic Choice of Judicial Candidates in the Context of the World Trade Organization

Drawing on the European Union (EU) foreign policy literature on effectiveness, this article studies how the European Union chooses judges to serve on the World Trade Organization’s key judicial institution: the Appellate Body. Conceptually, the article differentiates between effectiveness in representation and effectiveness in impact. The article shows how delegation to the European Commission has increased the strategic agenda-setting power for championing its preferred candidates. The article further compares European and US practice in nominating candidates. Overall, the article finds that effectiveness in representation has increased over time. In terms of effectiveness in impact, the article shows how the international environment conditions the EU’s influence. The article also exposes the difficulties of studying the effectiveness of EU external relations due to the peculiar decision-making processes dominant in judicial bodies.

Einiges über neue Chrysanthemum

Von Obergärtner P. Mischke

Análisis Constructivo y Dimensional de las Fachadas de la Gran Vía madrileña en el primer tramo de la calle

Esta investigación analiza la solución constructiva y dimensional de las fachadas del primer tramo de la Gran Vía madrileña y señala, entre otros aspectos, la aportación que supuso en el Sector de la Construcción español, la incorporación de perfilería metálica a la fábrica en los edificios del primer tramo de la calle, constituyendo el punto de partida del construir moderno del Madrid de principios del Siglo XX. Se han analizado sistemas y modulaciones que sintetizan, en un catálogo de fichas el modo constructivo de los primeros lustros del SXX. La metodología se ha centrado en el diseño de las fichas que describo a continuación: • Ficha de Histórica de datos generales (hitos históricos), esta ficha resume la historia de la construcción del edificio, indicando usos tanto originales como actuales, propiedad, fecha de construcción, e intervenciones constatadas. Especial significado para el desarrollo del trabajo tiene la definición de usos tanto originales como actuales. El uso del edificio se ha interpretado como la función. • Ficha dimensional, muestra medidas tanto en el eje X como en el Y, o en Z, en concreto intereje de huecos, medidas de entrepaños, ancho de huecos; medidas de suelo a suelo, medida del hueco más dintel; medidas de vuelos de balcones y/o miradores, y otros parámetros como porcentaje de huecos en fachada, frecuencia de aparición de los distintos huecos, su proporción alto ancho; parámetros que definen dimensionalmente los elementos que constituyen la fachada del edificio. Esta Ficha se acompaña del alzado de cada edificio acotado y de una fotografía actual. • Ficha de elementos y sistemas constructivos, en función del soporte (composición) y/o del material de acabado recogen datos obtenidos de la documentación gráfica y memorias existente en el archivo histórico y/o de documentación gráfica realizada por arquitectos que han intervenido en estos edificios. Tanto el contacto establecido con los arquitectos intervinientes, propietarios y empresas constructoras, como la localización de manuales de construcción fechados entre 1870 y 1925, han ayudado a definir a través de este catálogo de Fichas, los tipos (sistemas) constructivos y las modulaciones empleadas, una métrica que define con matemáticas la geometría del diseño, expresando además toda la carga de magia, encantamiento y siempre de modelo y orden que permanece en las fachadas de estos edificios. El desarrollo de estas técnicas denominadas en 1915 modernas han supuesto un cambio importante en el diseño, pues éste es un hecho diferencial en esta arquitectura con estructura metálica con respecto a los sistemas constructivos anteriores, permitiendo reducir el espesor del muro, y conseguir luces superiores tanto en huecos como en los vuelos de elementos salientes (balcones y miradores ) y consiguiendo un diseño acorde con la importancia del edificio. Una vez analizado el uso del edificio, sus dimensiones y los sistemas empleados, (siempre referidos al estudio de fachadas), se ha podido comprobar la relación entre Dimensión, Sistema y Función y los casos concretos en que esto sucede. La inspección visual y seguimiento de la calle han constatado la frecuencia de las labores de mantenimiento, reparación, o restauración en las fachadas de estos edificios. Estos conocimientos serán importantes de cara a intervenciones posteriores en el tiempo, quizá en los próximos 100 años. ABSTRACT Innovative techniques used in Spanish construction (for houses and buildings) emerged at the beginning of the 20th century. Reinforced steel profiles instead of traditional masonry was one of the most important innovations that was introduced. In order to make the most of the space available, masonry had to be as light as possible. This paper will examine the façades of these first buildings in “Gran Vía” Street and aims to show how they were constructed. Field work was carried out in order to analyze both the history of how the buildings were constructed and the construction and dimensional systems of the façade elements. Comprehending these building techniques and characteristics is the purpose of this Investigation. Some data sheets (cards) have been designed for finding out about historical information, uses, modulations and construction systems, in order to determine the relation between the Function, Dimension and System in these buildings. • The historical card shows date of construction, uses, propertys not only the original ones but nowadays, interventions special interest keeps the use or finality of the building. • The dimensional card shows measurements not only of axis X but also Y and Z, specifically the centre distance of openings, measurements of stretches of walls, the width of openings; floor to floor measurements, measurement of windows plus lintels; balcony overhangs and / or bay windows, and other parameters such as the percentage of façade openings, the frequency of the appearance of different openings, their proportion regarding height and width; parameters that dimensionally define the elements that make the façade of the building. This Card accompanies of the elevation of every measured building plus a current photograph. • Card of elements and building systems, depending on the support (composition) and / or the finish material that compiles information obtained from the existing graphic documentation and reports from historic files and / or graphic documentation drawn up by architects who have intervened in these buildings. The visual inspection and follow-up of the street confirm the frequency of maintenance work, repairs, or restoration of the façades of these buildings. Comprehension of these techniques and characteristics will enable future intervention, maybe in the next century.

GesInv: portal de ayuda a la gestión de la investigación

En la actualidad, la gestión de proyectos de investigación en la Universidad Complutense de Madrid se encuentra parcialmente automatizada o soportada mediante el uso de aplicaciones informáticas. No obstante, los procesos de justificación más habituales en la gestión económica de los proyectos de investigación (gestión de pagos / compras, gestión y justificación de viajes y gestión de material inventariable) se lleva a cabo en papel y manualmente. GesInv nace con objeto de facilitar y agilizar estos procesos que suponen una gran carga de trabajo a los investigadores y al personal administrativo debido a la gran cantidad de trámites que se gestionan en la UCM. GesInv proporciona un portal web que integra a todos los actores que están involucrados en los mencionados procedimientos, permitiendo la tramitación electrónica que disminuye los tiempos de tramitación y disminuye los errores cometidos al trasladar la información del papel a digital (como en la actualidad se lleva a cabo).