134 resultados para 2895


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Part studies on the impact of microfinance through self help groups (HGs) and other collective poverty alleviation initiatives have predominantly focused on the financial benefits to the individual or the group (Hermes and Lensink 2011; Hulme and Mosley 1996). Such benefits are typically attributed to the financial capital made available to SHGs (Swain and Varghese 2009) and the social capital which accrues through networking mechanisms within SHG processes (Tesoriero 2005). Few studies however, have examined the benefits of SHGs beyond group members. Accordingly, research was conducted to look beyond the immediate group processes and outcomes, and examine the impact of SHGs in the wider (local) community.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The electrodeposition of silver from two ionic liquids, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF4]) and N-butyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide ([C4mPyr][TFSI]), and an aqueous KNO3 solution on a glassy carbon electrode was undertaken. It was found by cyclic voltammetry that the electrodeposition of silver proceeds through nucleation–growth kinetics. Analysis of chronoamperometric data indicated that the nucleation–growth mechanism is instantaneous at all potentials in the case of [BMIm][BF4] and [C4mPyr][TFSI], and instantaneous at low overpotentials tending to progressive at high overpotentials for KNO3. Significantly, under ambient conditions, the silver electrodeposition mechanism changes to progressive nucleation and growth in [C4mPyr][TFSI], which is attributed to the uptake of atmospheric water in the IL. It was found that these differences in the growth mechanism impact significantly on the morphology of the resultant electrodeposit which is characterised ex situ by scanning electron microscopy and X-ray diffraction.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Introduction β-alanine (BAl) and NaHCO3 (SB) ingestion may provide performance benefits by enhancing concentrations of their respective physiochemical buffer counterparts, muscle carnosine and blood bicarbonate, counteracting acidosis during intense exercise. This study examined the effect of BAl and SB co-supplementation as an ergogenic strategy during high-intensity exercise. Methods Eight healthy males ingested either BAl (4.8 g day−1 for 4 weeks, increased to 6.4 g day−1 for 2 weeks) or placebo (Pl) (CaCO3) for 6 weeks, in a crossover design (6-week washout between supplements). After each chronic supplementation period participants performed two trials, each consisting of two intense exercise tests performed over consecutive days. Trials were separated by 1 week and consisted of a repeated sprint ability (RSA) test and cycling capacity test at 110 % Wmax (CCT110 %). Placebo (Pl) or SB (300 mg kgbw−1) was ingested prior to exercise in a crossover design to creating four supplement conditions (BAl-Pl, BAl-SB, Pl–Pl, Pl-SB). Results Carnosine increased in the gastrocnemius (n = 5) (p = 0.03) and soleus (n = 5) (p = 0.02) following BAl supplementation, and Pl-SB and BAl-SB ingestion elevated blood HCO3 − concentrations (p < 0.01). Although buffering capacity was elevated following both BAl and SB ingestion, performance improvement was only observed with BAl-Pl and BAl-SB increasing time to exhaustion of the CCT110 % test 14 and 16 %, respectively, compared to Pl–Pl (p < 0.01). Conclusion Supplementation of BAl and SB elevated buffering potential by increasing muscle carnosine and blood bicarbonate levels, respectively. BAl ingestion improved performance during the CCT110 %, with no aggregating effect of SB supplementation (p > 0.05). Performance was not different between treatments during the RSA test.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This report provides a systematic review of the most economically damaging endemic diseases and conditions for the Australian red meat industry (cattle, sheep and goats). A number of diseases for cattle, sheep and goats have been identified and were prioritised according to their prevalence, distribution, risk factors and mitigation. The economic cost of each disease as a result of production losses, preventive costs and treatment costs is estimated at the herd and flock level, then extrapolated to a national basis using herd/flock demographics from the 2010-11 Agricultural Census by the Australian Bureau of Statistics. Information shortfalls and recommendations for further research are also specified. A total of 17 cattle, 23 sheep and nine goat diseases were prioritised based on feedback received from producer, government and industry surveys, followed by discussions between the consultants and MLA. Assumptions of disease distribution, in-herd/flock prevalence, impacts on mortality/production and costs for prevention and treatment were obtained from the literature where available. Where these data were not available, the consultants used their own expertise to estimate the relevant measures for each disease. Levels of confidence in the assumptions for each disease were estimated, and gaps in knowledge identified. The assumptions were analysed using a specialised Excel model that estimated the per animal, herd/flock and national costs of each important disease. The report was peer reviewed and workshopped by the consultants and experts selected by MLA before being finalised. Consequently, this report is an important resource that will guide and prioritise future research, development and extension activities by a variety of stakeholders in the red meat industry. This report completes Phase I and Phase II of an overall four-Phase project initiative by MLA, with identified data gaps in this report potentially being addressed within the later phases. Modelling the economic costs using a consistent approach for each disease ensures that the derived estimates are transparent and can be refined if improved data on prevalence becomes available. This means that the report will be an enduring resource for developing policies and strategies for the management of endemic diseases within the Australian red meat industry.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Y2SiO5 has potential applications as functional-structural ceramic and environmental/thermal barrier coating material. As an important grain-boundary phase in the sintered Si3N4, it also influences the mechanical and dielectric performances of the host material. In this paper, we present the mechanical properties of Y2SiO5 including elastic moduli, hardness, strength and fracture toughness, and try to understand the mechanical features from the viewpoint of crystal structure. Y2SiO5 has low shear modulus, low hardness, as well as high capacity for dispersing mechanical damage energy and for resisting crack penetration. Particularly, it can be machined by cemented carbides tools. The crystal structure characteristics of Y2SiO5 suggest the low-energy weakly bonded atomic planes crossed only by the easily breaking Y-O bonds as well as the rotatable rigid SiO4 tetrahedra are the origins of low shear deformation, good damage tolerance and good machinability of this material. TEM observations also demonstrate that the mechanical damage energy was dispersed in the form of the micro-cleavages, stacking faults and twins along these weakly bonded atomic planes, which allows the "microscale-plasticity" for Y2SiO5.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aims were to determine whether measures of acceleration of the legs and back of dairy cows while they walk could help detect changes in gait or locomotion associated with lameness and differences in the walking surface. In 2 experiments, 12 or 24 multiparous dairy cows were fitted with five 3-dimensional accelerometers, 1 attached to each leg and 1 to the back, and acceleration data were collected while cows walked in a straight line on concrete (experiment 1) or on both concrete and rubber (experiment 2). Cows were video-recorded while walking to assess overall gait, asymmetry of the steps, and walking speed. In experiment 1, cows were selected to maximize the range of gait scores, whereas no clinically lame cows were enrolled in experiment 2. For each accelerometer location, overall acceleration was calculated as the magnitude of the 3-dimensional acceleration vector and the variance of overall acceleration, as well as the asymmetry of variance of acceleration within the front and rear pair of legs. In experiment 1, the asymmetry of variance of acceleration in the front and rear legs was positively correlated with overall gait and the visually assessed asymmetry of the steps (r ≥0.6). Walking speed was negatively correlated with the asymmetry of variance of the rear legs (r=−0.8) and positively correlated with the acceleration and the variance of acceleration of each leg and back (r ≥0.7). In experiment 2, cows had lower gait scores [2.3 vs. 2.6; standard error of the difference (SED)=0.1, measured on a 5-point scale] and lower scores for asymmetry of the steps (18.0 vs. 23.1; SED=2.2, measured on a continuous 100-unit scale) when they walked on rubber compared with concrete, and their walking speed increased (1.28 vs. 1.22m/s; SED=0.02). The acceleration of the front (1.67 vs. 1.72g; SED=0.02) and rear (1.62 vs. 1.67g; SED=0.02) legs and the variance of acceleration of the rear legs (0.88 vs. 0.94g; SED=0.03) were lower when cows walked on rubber compared with concrete. Despite the improvements in gait score that occurred when cows walked on rubber, the asymmetry of variance of acceleration of the front leg was higher (15.2 vs. 10.4%; SED=2.0). The difference in walking speed between concrete and rubber correlated with the difference in the mean acceleration and the difference in the variance of acceleration of the legs and back (r ≥0.6). Three-dimensional accelerometers seem to be a promising tool for lameness detection on farm and to study walking surfaces, especially when attached to a leg.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

El presente ensayo se realizó con el objetivo de medir el efecto de tres períodos de destete diferentes (20, 40 y 60 días respectivamente) sobre el Peso de la hembra al destete (PHD), Peso de la camada al destete (PCD) y Peso de la hembra al segundo parto (PHP2) en conejas primíparas. Para el análisis de los datos fue utilizado un Diseño Completamente Aleatorio (D.C.A.) con 4 repeticiones (hembras primíparas) para el destete de 20 días, 5 repeticiones para el destete de 40 días y 4 repeticiones para el destete de 60 días. La información utilizada para los análisis estadísticos provino de datos recaudados en registros reproductivos, de un conejar compuesto de 13 conejas y un padrote. La edad y peso promedio de los animales al inicio del ensayo fueron homogéneos (7 meses y 3.007 Kg respectivamente). El ensayo se realizó en el municipio de Rivas ubicado a 111 km de la ciudad de Managua, a 11º 26' de latitud Norte y 85º 44' de longitud Oeste, a una elevación de 57.77 m.s.n.m. Las variables en estudio fueron: Peso de la hembra al destete (PHD), Peso de la camada al destete (PCD), Peso de la hembra al segundo parto (PHP2). Los valores y desviación estándar para dichas variables fue de : 2.94483 ± 0.3071 Kg, promedios 2.8629 ± 1.5308 Kg y 3.0635 ± 0.2212 Kg, respectivamente. En el ANDEVA realizado para las diferentes variables, el efecto de los tratamientos sobre el Peso de la hembra al destete resultó no significativo. No así, para con las variables Peso de la camada al destete (PCD) y Peso de la hembra al segundo parto (PHP2), donde el efecto de los tratamientos sobre estas fue significativo. El efecto de la covariable (Peso de la hembra al primer parto) solamente resultó significativo para la variable Peso de la hembra al destete (PHD). Mediante la Separación de medias por la Prueba de DUNCAN se obtuvieron los siguientes promedios de las variables por tratamiento; Peso de la hembra al destete (PHD): 1.3469 Kg (t: 20 días), 2.9508 Kg (t: 40 días) y 2.9194 Kg (t: 60 días). Para el Peso de la camada al destete (PCD), los valores fueron: 1.3469 kg (t: 20 días), 2.6571 Kg (t: 40 días) y 4.6363 Kg (t: 60 días). Para el Peso de la hembra al segundo parto (PHP2) los valores fueron: 3.2895 Kg (t: 20 días), 3.0030 Kg (t: 40 días) y 2.9131 Kg (t: 60 días). Con la realización del Análisis de los Costos para hembras, se determinaron valores de 105.29, 127.42 y 148.65 (córdobas), para una hembra al destete en los tratamientos de 20, 40 y 60 días de destete respectivamente. Los costos para una hembra al segundo parto fueron: C$ 130.77 (t: 20 días), C$ 147.03 (t: 40 días) y C$168.26 (t: 60 días). Para gazapo al nacimiento los costos por tratamiento fueron los siguientes: C$ 4.43 (t: 20 días), C$ 4.60 (t: 40 días) y C$ 4.87 (t 60 días. Así también, se determinaron los costos de un gazapo al destete, obteniéndose valores de C$ 7.90, C$ 11.53 y C$15.82 para los tratamientos de 20, 40 y 60 días de destete respectivamente.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

双层靶结构是一种有效的太空防护结构,对速度为5~7km/s的小颗粒弹丸具有极好的防护作用。为研究双层靶结构的防护作用,用二级轻气炮发射超高速弹丸撞击靶板,用脉冲X光摄影系统拍摄弹丸撞击靶板后形成的碎片粒子云团。对照见证靶被侵彻的形态,可以得到内涵十分深刻的实验数据。自动跟踪式脉冲X光摄影系统是一种新型的脉冲X光摄影系统。应用该系统成功地拍摄了高速弹丸撞击靶板后弹、靶形成碎片粒子云团的形态。文章披露了铝弹撞击铝靶,钢弹撞击铅靶后某一时刻的X光拍摄的图象,并对实验结果作了初步分析。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Neste trabalho foram investigados os comportamentos térmico e mecânico e as características morfológicas de amostras de policarbonato de bisfenol-A (PC) com cristalinidade induzida por exposição ao vapor de solvente. A técnica de indução de cristalização foi empregada em três amostras de policarbonato de bisfenol-A de diferentes massas molares. Filmes vazados a partir de soluções de PC em clorofórmio e amostras moldadas por compressão foram expostos a um ambiente contendo vapor de acetona. Os filmes foram expostos por diferentes períodos de tempo e analisados em equipamentos de Calorimetria Diferencial de Varredura, Microscopia Óptica com luz polarizada e Espectroscopia na Região do Infravermelho com Transformada de Fourier, para caracterizar a indução de cristalinidade. A indução de cristalinidade foi confirmada e a fase cristalina apresentou estrutura esferulítica. As amostras de maior massa molar mostraram maior teor de cristalinidade. O desempenho mecânico das amostras cristalinas de policarbonato mostrou diferenças, com a mudança de seu comportamento mecânico de dúctil para frágil, independente da massa molar

Relevância:

10.00% 10.00%

Publicador: