Estudo da combustão do óleo pirolítico de pneus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização e pirólise de arenitos asfálticos oriundos da Formação Pirambóia, Bacia do Paraná: avaliação da viabilidade para produção de óleo

Neste trabalho, algumas caracterizações químicas foram realizadas em arenitos asfálticos da região de Piracicaba-SP, Formação Piramboia da Bacia do Paraná, para verificar seu potencial de produção de óleo. Para isso, as amostras obtidas da região foram submetidas a avaliação por termogravimetria, teor de umidade, teor de cinzas, teor de material orgânico por extração, pirólise, análise elementar e fracionamento em coluna. Por TGA observou-se que a 500 C praticamente todo material orgânico presente sofreu pirólise. A extração colaborou para se obter a classificação das amostras quanto ao teor de material orgânico, apresentando entre 4 e 13%, sendo que pelos teores encontrados a amostra AM06 é considerada de alto potencial produtivo, as amostras AM05, AM08 e AM09 são de médio, as amostras AM01, AM02, AM03 e AM07 possuem baixo, mas ainda atrativo, e a AM04 não possui atratividade. Pela avaliação elementar, a relação H/C e O/C dos extratos evidenciaram que algumas amostras estão no processo final da diagênese e outras no início da catagênese, indicando que elas estão no processo inicial de maturação. A avaliação cromatográfica dos extratos revelou que houve perdas de óleo por intemperismo restando majoritariamente compostos de alto peso molecular. O fracionamento permitiu verificar que as amostras AM01, AM06 e AM09 possuem maior quantidade de hidrocarbonetos livres e as amostras AM06 e AM07 e AM09 apresentaram maior teor de óleo. O procedimento de pirólise evidenciou que as amostras AM01, AM05, AM06 e AM09 apresentam maior potencial de geração de óleo, sendo que a faixa encontrada de óleo pirolítico ficou entre 2 e 8%, e através de avaliação por CGAR e CGAR-EM observou-se que ela promove a liberação de quantidades consideráveis de substâncias mais leves do que quando comparados aos extratos obtidos diretamente nas amostras originais. Além de produzir uma série homóloga de hidrocarbonetos parafínicos e olefínicos. A comparação dos produtos de pirólise dos arenitos com os produtos de pirólise de um resíduo de vácuo por CGAR-EM permitiu observar que existe similaridade entre suas composições, onde o processo de pirólise do resíduo de vácuo gera uma série homóloga de hidrocarbonetos entre C10 a C32, similar aos produtos de pirólise da amostra AM09, porém com menor variedade de tipos de hidrocarbonetos. A pré-avaliação da co-pirólise dos arenitos com resíduos plásticos indicou que é possível aumentar a geração de líquidos, porém é necessário mais estudo para afirmações inequívocas. Com base nos resultados das avaliações realizadas podemos concluir que a região apresenta na sua maioria potencial interessante para produção de óleo utilizando pirólise

Bio-óleo e biogás da degradação termoquímica de lodo de esgoto doméstico em cilindro rotativo

The objective of this study was to produce biofuels (bio-oil and gas) from the thermal treatment of sewage sludge in rotating cylinder, aiming industrial applications. The biomass was characterized by immediate and instrumental analysis (elemental analysis, scanning electron microscopy - SEM, X-ray diffraction, infrared spectroscopy and ICP-OES). A kinetic study on non-stationary regime was done to calculate the activation energy by Thermal Gravimetric Analysis evaluating thermochemical and thermocatalytic process of sludge, the latter being in the presence of USY zeolite. As expected, the activation energy evaluated by the mathematical model "Model-free kinetics" applying techniques isoconversionais was lowest for the catalytic tests (57.9 to 108.9 kJ/mol in the range of biomass conversion of 40 to 80%). The pyrolytic plant at a laboratory scale reactor consists of a rotating cylinder whose length is 100 cm with capable of processing up to 1 kg biomass/h. In the process of pyrolysis thermochemical were studied following parameters: temperature of reaction (500 to 600 ° C), flow rate of carrier gas (50 to 200 mL/min), frequency of rotation of centrifugation for condensation of bio-oil (20 to 30 Hz) and flow of biomass (4 and 22 g/min). Products obtained during the process (pyrolytic liquid, coal and gas) were characterized by classical and instrumental analytical techniques. The maximum yield of liquid pyrolytic was approximately 10.5% obtained in the conditions of temperature of 500 °C, centrifugation speed of 20 Hz, an inert gas flow of 200 mL/min and feeding of biomass 22 g/min. The highest yield obtained for the gas phase was 23.3% for the temperature of 600 °C, flow rate of 200 mL/min inert, frequency of rotation of the column of vapor condensation 30 Hz and flow of biomass of 22 g/min. The non-oxygenated aliphatic hydrocarbons were found in greater proportion in the bio-oil (55%) followed by aliphatic oxygenated (27%). The bio-oil had the following characteristics: pH 6.81, density between 1.05 and 1.09 g/mL, viscosity between 2.5 and 3.1 cSt and highest heating value between 16.91 and 17.85 MJ/ kg. The main components in the gas phase were: H2, CO, CO2 and CH4. Hydrogen was the main constituent of the gas mixture, with a yield of about 46.2% for a temperature of 600 ° C. Among the hydrocarbons formed, methane was found in higher yield (16.6%) for the temperature 520 oC. The solid phase obtained showed a high ash content (70%) due to the abundant presence of metals in coal, in particular iron, which was also present in bio-oil with a rate of 0.068% in the test performed at a temperature of 500 oC.

Professor Emeritus Leo G Carney Optometry's quiet achiever

Perhaps more than any other sub-discipline in optometry and vision science, the academic field of cornea and contact lenses is populated by an assortment of extroverted and flamboyant characters who constantly travel the world, entertaining clinicians with dazzling audiovisual presentations, informing them about the latest advances in the field and generally promoting their own scientific agendas. The antithesis of this is Leo Carney (Figure 1), a highly accomplished researcher, teacher, mentor and administrator, who has quietly and with great dignity carved out an impressive career in academic optometry. Indeed, Leo Carney is optometry's quintessential ‘quiet achiever’

Portrait of Leo Catzenstein with his mother-in-law Henriette Gottschalk holding a parasol Portraits Family

Digital Image

Leo Catzenstein seated on an outdoor bench Portraits Men

Digital Image

Portrait of Leo Catzenstein and his wife Aenny Catzenstein nee Gottschalk Portraits Couples

Digital Image

Portrait of Leo Baeck as military chaplain Military; World War I; Portraits

Digital Image

Leo Baeck with unidentified soldiers Military; World War I; Portraits Groups

Center May 2000

Seated portrait of Leo Baeck; Oppeln Portraits; Men

"Dr. Leo Baeck Im Jahre 1900 als junger Rabbiner in Oppeln O.S."

Rabbi Leo Baeck's arrival at La Guardia Airport, New York from London for the Union of American Hebrew Congregations American Jewish Cavalcade Portraits; Groups

Sitting l-r Leo Baeck, Maurice N. Eisendrath, Oscar M. Lazrus; Standing l-r Jane Evans, Henry W. Levy, Saul Elgart, Rabbi Daniel L. Davis, Louis Rittenberg and Leonard H. Spring

Leo Baeck with group; Boston Portraits; Groups; Men

Page 58 of the "American Jewish Cavalcade" scrapbook of Leo Baeck in New York found in ROS 10 Folder 3

Rabbi Leo Baeck with Willard Johnson of the World Brotherhood and Rabbi S. Andhil Fineberg of the American Jewish Committee, after a dinner honoring Baeck; World Brotherhood; Bonn Portraits Groups; Men

Digital Image