Knoop Microhardness and FT-Raman Spectroscopic Evaluation of a Resin-Based Dental Material Light-Cured by an Argon Ion Laser and Halogen Lamp: An in Vitro Study

Objective: The purpose of this study was to evaluate in vitro the Knoop microhardness (Knoop hardness number [KHN]) and the degree of conversion using FT-Raman spectroscopy of a light-cured microhybrid resin composite (Z350-3M-ESPE) Vita shade A3 photopolymerized with a halogen lamp or an argon ion laser. Background Data: Optimal polymerization of resin-based dental materials is important for longevity of restorations in dentistry. Materials and Methods: Thirty specimens were prepared and inserted into a disc-shaped polytetrafluoroethylene mold that was 2.0 mm thick and 3 mm in diameter. The specimens were divided into three groups (n = 10 each). Group 1 (G1) was light-cured for 20 sec with an Optilux 501 halogen light with an intensity of 1000 mW/cm(2). Group 2 (G2) was photopolymerized with an argon laser with a power of 150 mW for 10 sec, and group 3 (G3) was photopolymerized with an argon laser at 200 mW of power for 10 sec. All specimens were stored in distilled water for 24 h at 37 degrees C and kept in lightproof containers. For the KHN test five indentations were made and a depth of 100 mu m was maintained in each specimen. One hundred and fifty readings were obtained using a 25-g load for 45 sec. The degree of conversion values were measured by Raman spectroscopy. KHN and degree of conversion values were obtained on opposite sides of the irradiated surface. KHN and degree of conversion data were analyzed by one-way ANOVA and Tukey tests with statistical significance set at p < 0.05. Results: The results of KHN testing were G1 = 37.428 +/- 4.765; G2 = 23.588 +/- 6.269; and G3 = 21.652 +/- 4.393. The calculated degrees of conversion (DC%) were G1 = 48.57 +/- 2.11; G2 = 43.71 +/- 3.93; and G3 = 44.19 +/- 2.71. Conclusions: Polymerization with the halogen lamp ( G1) attained higher microhardness values than polymerization with the argon laser at power levels of 150 and 200 mW; there was no difference in hardness between the two argon laser groups. The results showed no statistically significant different degrees of conversion for the polymerization of composite samples with the two light sources tested.

Argon ion laser and halogen lamp activation of a dark and light resin composite: microhardness after long-term storage

The objective of this study was to evaluate in vitro light activation of the nano-filled resin composite Vita shade A1 and A3 with a halogen lamp (QTH) and argon ion laser by Knoop microhardness profile. Materials and methods: Specimens of nanofilled composite resin (Z350-3 M-ESPE) Vita shade A1 and A3 were prepared with a single increment inserted in 2.0-mm-thick and 3-mm diameter disc-shaped Teflon mold. The light activation was performed with QTH for 20 s (with an intensity of approximately 1,000 mW/cm(2) and 700 mW/cm(2)) and argon ion laser for 10 s (with a power of 150 mW and 200 mW). Knoop microhardness test was performed after 24 h and 6 months. The specimens were divided into the 16 experimental groups (n = 10), according to the factors under study: photoactivation form, resin shade, and storage time. Knoop microhardness data was analyzed by a factorial ANOVA and TukeyA ` s tests at the 0.05 level of significance. Results: Argon ion laser was not able to photo-activate the darker shade of the nanofilled resin composite evaluated but when used with 200 mW it can be as effective as QTH to photo-activate the lighter shade with only 50% of the time exposure. After 6 months storage, an increase in the means of Knoop microhardness values were observed. Conclusions: Light-activation significantly influenced the Knoop microhardness values for the darker nanofilled resin composite.

Micro-hardness evaluation of a micro-hybrid composite resin light cured with halogen light, light-emitting diode and argon ion laser

This in vitro study aimed to determine whether the micro-hardness of a composite resin is modified by the light units or by the thickness of the increment. Composite resin disks were divided into 15 groups (n = 5), according to the factors under study: composite resin thickness (0 mm, 1 mm, 2 mm , 3 mm and 4 mm) and light units. The light activation was performed with halogen light (HL) (40 s, 500 mW/cm(2)), argon ion laser (AL) (30 s, 600 mW/cm(2)) or light-emitting diode (LED) (30 s, 400 mW/cm(2)). Vickers micro-hardness tests were performed after 1 week and were carried out on the top surface (0 mm-control) and at different depths of the samples. Analysis of variance (ANOVA) and Tukey tests (P a parts per thousand currency signaEuro parts per thousand 0.05) revealed no statistically significant difference among the light units for the groups of 0 mm and 1 mm thickness. At 2 mm depth, the AL was not statistically different from the HL, but the latter showed higher micro-hardness values than the LED. In groups with 3 mm and 4 mm thickness, the HL also showed higher micro-hardness values than the groups activated by the AL and the LED. Only the HL presented satisfactory polymerization with 3 mm of thickness. With a 4 mm increment no light unit was able to promote satisfactory polymerization.

Effect of argon purity on mechanical properties, microstructure and fracture mode of commercially pure (cp) Ti and Ti-6Al-4V alloys for ceramometal dental prostheses

Provision of an inert gas atmosphere with high-purity argon gas is recommended for preventing titanium castings from contamination although the effects of the level of argon purity on the mechanical properties and the clinical performance of Ti castings have not yet been investigated. The purpose of this study was to evaluate the effect of argon purity on the mechanical properties and microstructure of commercially pure (cp) Ti and Ti-6Al-4V alloys. The castings were made using either high-purity and/or industrial argon gas. The ultimate tensile strength (UTS), proportional limit (PL), elongation (EL) and microhardness (VHN) at different depths were evaluated. The microstructure of the alloys was also revealed and the fracture mode was analyzed by scanning electron microscopy. The data from the mechanical tests and hardness were subjected to a two-and three-way ANOVA and Tukey`s test (alpha = 0.05). The mean values of mechanical properties were not affected by the argon gas purity. Higher UTS, PL and VHN, and lower EL were observed for Ti-6Al-4V. The microhardness was not influenced by the argon gas purity. The industrial argon gas can be used to cast cp Ti and Ti-6Al-4V.

Shrinkage stress and mechanical properties of photoactivated composite resin using the argon ion laser

The objective of this study was to verify the influence of photoactivation with the argon ion laser on shrinkage stress (SS), followed by evaluation of Vickers microhardness (VM), percentage of maximum hardness (PMH), flexural strength (FS), and flexural modulus (FM) of a composite resin. The study groups were: L1-laser at 200 mW for 10 seconds; L2-laser at 200 mW for 20 seconds; L3-laser at 250 mW for 10 seconds; L4-laser at 250 mW for 20 seconds; H-halogen light at 275 mW for 20 seconds. Data were analyzed by ANOVA/Tukey`s test (alpha=5%). The values of SS (MPa) were statistically lower for the group L3 (1.3)c, followed by groups L1 (2.7)b, L4 (3.4)a, b, L2 (3.7)a, and H (4.5)a. There was no difference in the values of VM when the same time of photoactivation was used, with respective values being L1=70.1a, L2=78.1b, L3=69.9a, L4=78.1b and H=79.9b. All groups showed a PMH of at least 80%. Only the group L1 showed differences in FS (MPa) and FM (GPa), the respective values of 86.2 and 5.4 being lower. Therefore, the use of argon ion laser had influenced the composite resin polymerization. The L3 group presented adequate mechanical properties and minimum SS, reducing the clinical working time for photoactivation of restorations with the tested resin by 50%.

Behavior of argon gas release from manganese oxide minerals as revealed by Ar-40/Ar-39 laser incremental heating analysis

Manganese oxides in association with paleo-weathering may provide significant insights into the multiple factors affecting the formation and evolution of weathering profiles, such as temperature, precipitation, and biodiversity. Laser probe step-heating analysis of supergene hollandite and cryptomelane samples collected from central Queensland, Australia, yield well-defined plateaus and consistent isochron ages, confirming the feasibility, dating very-fined supergene manganese oxides by Ar-40/(39) Ar technique. Two distinct structural sites hosting Ar isotopes can be identified in light of their degassing behaviors obtained by incremental heating analyses. The first site, releasing its gas fraction at the laser power 0.2-0.4 W, yields primarily Ar-40(atm), Ar-38(atm), and Ar-36(atm), (atmospheric Ar isotopes). The second sites yield predominantly Ar-40* (radiogenic Ar-40), Ar-39(K), and Ar-38(K) (nucleogenic components), at similar to0.5-1.0 W. There is no significant Ar gas released at the laser power higher than 1.0 W, indicating the breakdown of the tunnel sites hosting the radiogenic and nucleogenic components. The excellent match between the degassing behaviors of Ar-40*, Ar-39(K), and Ar-38(K) suggests that these isotopes occupy the same crystallographic sites and that Ar-39(K) loss from the tunnel site by recoil during neutron irradiation and/or bake-out procedure preceding isotopic analysis does not occur. Present investigation supports that neither the overwhelming atmospheric Ar-40 nor the very-fined nature of the supergene manganese oxides poses problems in extracting meaningful weathering geo-chronological information by analyzing supergene manganese oxides minerals.

Effect of argon ion energy on the performance of silicon nitridemultilayer permeation barriers grown by hot-wire CVD on polymers

One of the authors (S.M.) acknowledges Direction des Relations Extérieures of Ecole Polytechnique for financial support.

Argon@uta : Les TIC a les webs dels museus d'història i arqueologia

En un principi, aquest projecte es va concebre com un treball de recerca aplicada sobre les possibilitats que obrien les TIC en la gestió del patrimoni. Per tant, es volien contemplar tots els àmbits que conformen la gestió patrimonial: la difusió, la conservació, la gestió d'equipaments, la restauració, la investigació... El resultat d'aquest treball es volia plasmar en la creació d'una pàgina de recursos virtuals per a la gestió del patrimoni que contemplaria dues vessants. D'una banda, aplegaria un recull d'experiències en l'àmbit virtual d'arreu del món -CD's, planes web, interactius...- que poguessin servir de referent als professionals de la gestió patrimonial i als estudiants d'aquest àmbit. D'altre banda, aquesta plana volia oferir una anàlisi crítica i comentari dels recursos seleccionats.

Argon-laser iridoplasty in the management of uveitis-induced acute angle-closure glaucoma.

PURPOSE: To report the use of argon laser iridoplasty in the management of uveitic acute angle-closure glaucoma. METHODS: Interventional case report. RESULTS: A 46-year-old man developed uveitic acute angle-closure glaucoma with an intraocular pressure (IOP) of 65 mmHg. After unsuccessful attempts with medical treatment and two laser peripheral iridotomies, iridoplasty allowed to break posterior synechiae, open the angle, and reduce the IOP within a few hours. CONCLUSIONS: Argon laser iridoplasty allowed rapid reduction of IOP and prevented the need for emergency surgery. Therefore, the authors stipulate that it is a viable management option in active uveitic acute angle-closure glaucoma.

Influence of age on retinochoroidal healing processes after argon photocoagulation in C57bl/6j mice.

PURPOSE: To analyze the influence of age on retinochoroidal wound healing processes and on glial growth factor and cytokine mRNA expression profiles observed after argon laser photocoagulation. METHODS: A cellular and morphometric study was performed that used 44 C57Bl/6J mice: 4-week-old mice (group I, n=8), 6-week-old mice (group II, n=8), 10-12-week-old mice (group III, n=14), and 1-year-old mice (group IV, n=14). All mice in these groups underwent a standard argon laser photocoagulation (50 microm, 400 mW, 0.05 s). Two separated lesions were created in each retina using a slit lamp delivery system. At 1, 3, 7, 14, 60 days, and 4 months after photocoagulation, mice from each of the four groups were sacrificed by carbon dioxide inhalation. Groups III and IV were also studied at 6, 7, and 8 months after photocoagulation. At each time point the enucleated eyes were either mounted in Tissue Tek (OCT), snap frozen and processed for immunohistochemistry or either flat mounted (left eyes of groups III and IV). To determine, by RT-PCR, the time course of glial fibrillary acidic protein (GFAP), vascular endothelial growth factor (VEGF), and monocyte chemotactic protein-1 (MCP-1) gene expression, we delivered ten laser burns (50 microm, 400 mW, 0.05 s) to each retina in 10-12-week-old mice (group III', n=10) and 1-year-old mice (group IV', n=10). Animals from Groups III' and IV' had the same age than those from Groups III and IV, but they received ten laser impacts in each eye and served for the molecular analysis. Mice from Groups III and IV received only two laser impacts per eye and served for the cellular and morphologic study. Retinal and choroidal tissues from these treated mice were collected at 16 h, and 1, 2, 3, and 7 days after photocoagulation. Two mice of each group did not receive photocoagulation and were used as controls. RESULTS: In the cellular and morphologic study, the resultant retinal pigment epithelium interruption expanse was significantly different between the four groups. It was more concise and smaller in the oldest group IV (112.1 microm+/-11.4 versus 219.1 microm+/-12.2 in group III) p<0.0001 between groups III and IV. By contrast, while choroidal neovascularization (CNV) was mild and not readily identifiable in group I, at all time points studied, CNV was more prominent in the (1-year-old mice) Group IV than in the other groups. For instance, up to 14 days after photocoagulation, CNV reaction was statistically larger in group IV than in group III ((p=0.0049 between groups III and IV on slide sections and p<0.0001 between the same groups on flat mounts). Moreover, four months after photocoagulation, the CNV area (on slide sections) was 1,282 microm(2)+/-90 for group III and 2,999 microm(2)+/-115 for group IV (p<0.0001 between groups III and IV). Accordingly, GFAP, VEGF, and MCP-1 mRNA expression profiles, determined by RT-PCR at 16 h, 1, 2, 3, and 7 days postphotocoagulation, were modified with aging. In 1-year-old mice (group IV), GFAP mRNA expression was already significantly higher than in the younger (10-12 week) group III before photocoagulation. After laser burns, GFAP mRNA expression peaked at 16-24 h and on day 7, decreasing thereafter. VEGF mRNA expression was markedly increased after photocoagulation in old mice eyes, reaching 2.7 times its basal level at day 3, while it was only slightly increased in young mice (1.3 times its level in untreated young mice 3 days postphotocoagulation). At all time points after photocoagulation, MCP-1 mRNA expression was elevated in old mice, reaching high levels of expression at 16 h and day 3 respectively. CONCLUSIONS: Our results were based on the study of four different age groups and included not only data from morphological observations but also from a molecular analysis of the various alterations of cytokine signaling and expression. One-year-old mice demonstrated more extensive CNV formation and a slower pace of regression after laser photocoagulation than younger mice. These were accompanied by differences in growth factors and cytokine expression profiles indicate that aging is a factor that aggravates CNV. The above results may provide some insight into possible therapeutic strategies in the future.

L'argon : utilisations, toxicité et stratégie analytique en toxicologie médicolégale

Bien qu'intrinsèquement non toxiques, les gaz nobles comme l'argon entraînent à fortes concentrations une déplétion d'oxygène pouvant mener jusqu'à l'asphyxie. Si l'argon se retrouve dans la circulation générale, celui-ci peut même être responsable d'embolies parfois fatales. Cependant, les propriétés d'inerties physicochimiques de ce gaz le rendent très utile dans de nombreuses applications actuelles. Ces applications étant en constante augmentation, il n'est pas rare d'observer proportionnellement des intoxications parfois létales liées à ce gaz. Ainsi, devant le manque d'harmonisation des prélèvements d'échantillons biologiques afin de mettre en évidence de telles intoxications aux gaz nobles et devant l'augmentation du nombre de cas, il devient nécessaire d'établir un état des lieux sur l'utilisation de l'argon, sa toxicité et la stratégie analytique à adopter dans le contexte médico-légal.

Painless Indirect Argon Laser in High Risk Proliferative Diabetic Retinopathy.

Background: Proliferative retinopathy is an important cause of vision loss in diabetic patients. Incomplete panretinal photocoagulation (PRP) can lead to recurrent proliferation of new vessels. Patients and Methods: We retrospectively analysed the outcome of patients with high risk proliferative diabetic retinopathy (PDR) previously treated with slit lamp PRP who underwent indirect fill in argon laser treatment with scleral indentation under anesthesia for persistent neovascular proliferation. Results: Seventeen eyes of ten patients were included. The mean age at diabetes onset was 17.3 years SD 16.2 (range 2-44). All patients reported long standing poor glycemic control (mean HbA1c: 8.5 % SD 1.3 range 5.9-10.2). The area of retinal ischemia decreased significantly from 15 ± 7.5 disk areas (DA) before fill-in laser to 3.2 ± 4.2 DA after fill-in laser (p = 0.001). The new vessels also regressed significantly after laser treatment 8.6 ± 6.1 DA before treatment versus 6.5 ± 6.4 DA after laser treatment, (p = 0.044). Quiescent PDR was reached in 10 eyes (58.8 %) at the last visit. Conclusions: Fill-in indirect argon laser under general anesthesia should be considered to achieve further new vessels regression in high risk PDR patients. Scleral indentation and absence of pain may allow for more extensive laser application.

Induction of mitotic aberrations by Argon ion lasers in Vicia faba L. and Allium cepa L.

A comparat ive study of the effect oflaser in inducing chro mosomal aberrat ions at 4gg nm was done in View j aba L. (faba bean) and Allium ccpa L. (onion) with Argon ion laser (Spectra Physics Model 171). Seeds and bulbs of V.jaba and A. eepa were subjected to laser irra diation by 4gg nm excitations from Argon ion laser source at power levels 200 and 400 mW with power densities 2.25 mW em" and 4.49 mW em" and ditTerent exposure times (10, 20, 30 & 40 minutes). Similar to the effect of oth er physical and chemical mutagens, laser caused a dose dependent decrease in mitotic index and a rise in mitotic aberrations when compared to the control. In both plant species, mutations were observed in all stages of mitotic cell cycle. The total percentage of aberrations was two fold higher at 400 mW than at 200 mW exposure.