Optimization of microwave-assisted extration of phenolic compounds from tomao by full factorial design coupled with response surface methodology

Tomato (Lycopersicon esculentum Mill.), apart from being a functional food rich in carotenoids, vitamins and minerals, is also an important source of phenolic compounds [1 ,2]. As antioxidants, these functional molecules play an important role in the prevention of human pathologies and have many applications in nutraceutical, pharmaceutical and cosmeceutical industries. Therefore, the recovery of added-value phenolic compounds from natural sources, such as tomato surplus or industrial by-products, is highly desirable. Herein, the microwave-assisted extraction of the main phenolic acids and flavonoids from tomato was optimized. A S-Ieve! full factorial Box-Behnken design was implemented and response surface methodology used for analysis. The extraction time (0-20 min), temperature (60-180 "C), ethanol percentage (0-100%), solidlliquid ratio (5-45 g/L) and microwave power (0-400 W) were studied as independent variables. The phenolic profile of the studied tomato variety was initially characterized by HPLC-DAD-ESIIMS [2]. Then, the effect of the different extraction conditions, as defined by the used experimental design, on the target compounds was monitored by HPLC-DAD, using their UV spectra and retention time for identification and a series of calibrations based on external standards for quantification. The proposed model was successfully implemented and statistically validated. The microwave power had no effect on the extraction process. Comparing with the optimal extraction conditions for flavonoids, which demanded a short processing time (2 min), a low temperature (60 "C) and solidlliquid ratio (5 g/L), and pure ethanol, phenolic acids required a longer processing time ( 4.38 min), a higher temperature (145.6 •c) and solidlliquid ratio (45 g/L), and water as extraction solvent. Additionally, the studied tomato variety was highlighted as a source of added-value phenolic acids and flavonoids.

Non-fermented and fermented jabuticaba (Myrciaria cauliflora Mart.) pomaces as valuable sources of functional ingredients

abuticaba (Myrciaria cauliflora. Mart) is a highly perishable fruit native to Brazil, which is consumed both fresh and industrially processed in the form of juices, jams, wines and distilled liqueurs. This processing generates a large amount of waste by-products, which represent approximately 50% of the fruit weight. The by-products are of interest for obtaining valuable bioactive compounds that could be used as nutraceuticals or functional ingredients. In this study, fermented and non-fermented jabuticaba pomaces were studied regarding their hydrophilic and lipophilic compounds, as well as their antioxidant properties, including: soluble sugars, organic acids and tocopherols (using high performance liquid chromatography coupled to refraction index, diode array and fluorescence detector, respectively); phenolics and anthocyanins, (using liquid chromatography coupled to diode array detection, and mass spectrometry with electrospray ionization); and fatty acids (using gas-liquid chromatography with flame ionization detection). The analytical data demonstrated that jabuticaba pomaces are a rich source of bioactive compounds such as tocopherols, polyunsaturated fatty acids and phenolic compounds (namely hydrolyzable tannins and anthocyanins) with antioxidant potential. Therefore, jabuticaba pomace may have good potential as a functional ingredient in the fabrication of human foods and animal feed.

Assessment of grazing selectivity in relation to land cover: a comparison between sheep and goats

Portugal’s Northeast production of sheep and goats are based on the exploitation of landscape by-products such as spontaneous native vegetation and agriculture leftovers. Shepherds tend the flocks throughout grazing itineraries every day, crossing a mosaic of patches of varied land uses. During the journey, the shepherd acts together with the sheep and goats to select each patch in creating an ordered sequence of land uses. The focus of the research is on the land-use composition of the grazing itineraries; determinate how they depend on the patterns of the landscape mosaic. It is utilized a data set of 26 monthly herd’s itineraries, 13 of sheep and 13 of goats, to investigate the relationship of the land uses crossed by the flocks and the land uses of the landscape, evaluating the land-use preferences and selectivity of the sheep and goats. It is utilized the divergences in the time spent and distance travelled by the herds and the area of the land uses in the landscape, the chi-square test to relate the preferred land used and the season, and the discriminate analysis to distinguish the preferences and the selectivity of the herd of sheep and the herd of goats. The herds of the sheep and the goats presented different land-use preferences over the seasons and the discriminant analysis shows that they have different landscape preferences. The herd of sheep has the highest selectivity indexes for the annual irrigated crops, the agricultural complex systems and the agroforestry land uses. The highest selectivity indexes for the herd of goats were found for the deciduous forest, the agriculture with natural and semi-natural spaces and the shrublands land uses. It was concluded that the landscape management for sheep and goats herding has to be different: the agricultural land uses are essential to the flocks of sheep and the forest land uses are decisive to the flocks of goats.

Biossorção do corante têxtil preto reafix super 2R com bagaço de malte

Na indústria têxtil grandes volumes de efluentes são gerados, os quais são caracterizados por serem coloridos e poluentes , devido à presença de corantes em sua composição. Com a necessidade de descontaminação, diferentes métodos são utilizados no tratamento, sendo um deles, a biossorção. Este consiste na remoção das substâncias tóxicas recorrendo a biossorventes obtidos a partir de resíduos agrícolas e sub-produtos de processos industriais. O objetivo principal deste trabalho foi estudar a remoção do corante Preto Reafix Super 2R em soluções aquosas por meio de biossorção com bagaço de malte. Baseando-se sobretudo no estudo da cinética e equilíbrio entre o biossorvente e o corante. Numa primeira fase foi estudada a influência dos parâmetros operacionais, como a influência do diâmetro médio das partículas do biossorvente, o pH da solução e a velocidade de agitação da solução. Sendo as condições ótimas de biossorção definidas a pH 2, velocidade de agitação de 150 rpm e biomassa sem peneiramento. Posteriormente, ajustaram-se os modelos cinéticos de Pseudo-primeira ordem, Pseudo-segunda ordem e de Difusão intrapartícula aos resultados experimentais obtidos pela cinética de adsorção avaliando também a influência da temperatura no tempo de contato para se alcançar o equilibrio. O modelo de Pseudo-segunda ordem conduziu ao melhor ajuste, com um coeficiente de correlação (R2) de apróximadamente 1. A partir dos testes de equilíbrio realizados com diferentes concentrações de corante, foram ajustadas as isotermas de Langmuir, Freundlich, Tempkin aos resultados experimentais tendo-se obtido parâmetros bastante significativos para o modelo Langmuir, cuja capacidade máxima de remoção (qmax) obtida foi de 40,16 mg.g-1. A análise dos parâmetros termodinâmicos permitiram avaliar que o processo de adsorção ocorre espontaneamente, sendo endotérmico e que ao longo do processo aumenta a aleatoriedade na interface sólido/solução, devido à desorganização do processo em virtude das interações que ocorrem.

Effect of commercial starter cultures and native yeasts on ochratoxin a production by aspergillus westerdijkiae and penicillium nordicum in meat products

Processed meat products are of worldwide importance and, because of their intrinsic factors as well as the processing methods, they are highly prone to fungal and mycotoxin contamination. Ochratoxin A (OTA) is the most significant mycotoxin in processed meat products. Penicillium nordicum is considered to be responsible for OTA contamination of meat products, as it is highly adapted to salt and protein-rich matrices and is moderately psycrotrophic. However, another OTA-producing fungus, Aspergillus westerdijkiae, adapted to carbon-rich matrices such as cereals and coffee beans, has been recently associated with high levels of OTA in meat products. Several Lactic Acid Bacteria (LAB) and yeasts have been tested as biocontrol agents against P. nordicum growth and OTA production in meat products, with promising results, but none of the studies have considered A. westerdijkiae. The aim of this work was to evaluate in vitro the effect of a commercial starter culture used in sausage fermentation and four yeasts isolated from dry-cured sausage on these two OTA-producing fungi, both in terms of fungal growth and of OTA production, using different meat-based culture media as model systems. The mechanisms underlying the observed effect were also studied. For this purpose, C. krusei, C. zeylanoides, R. mucilaginosa, R. glutinis, a mix of these yeasts and the starter culture were co-inoculated with P. nordicum and A. westerdijkiae in industrial sausage, traditional sausage, and ham-based media, under conditions of water activity, salt concentration and temperature that mimic real conditions at beginning and end of sausage curing process. Fungal growth was determined by measuring colony diameter, and OTA production was quantified by HPLC-FLD after extraction with methanol. Yeasts where found to inhibit significantly the growth of both fungi. P. nordicum was unable to produce detectable OTA in both sausage-based media under any condition. In ham, yeasts reduced OTA production, while the starter culture significantly increased it. Unexpectedly, OTA production by A. westerdijkiae was significantly stimulated in all media tested by all microorganisms. Matrix has a significant effect on OTA production by P. nordicum, but not by A. westerdijkiae, for which only temperature showed to have effect. By testing the mechanisms of action by which starter culture and C. zeylanoides influenced fungal responses, we were able to determine that direct contact and simultaneous growth of test organisms were the mechanisms more significantly involved in the responses. In conclusion, ochratoxigenic fungi do not all respond to antagonistic microorganisms in the same way. The use of biocontrol agents with the intent of reducing fungal growth and mycotoxin production by one fungus can have unexpected effects on others, thus leading to unforeseen safety problems. Further experiments are recommended to properly understand the reasons behind the different effects of microorganisms, to ensure their safe as biocontrol agents.