Effect Of Simulated Microwave Disinfection On The Linear Dimensional Change, Hardness And Impact Strength Of Acrylic Resins Processed By Different Polymerizing Cycles.

This study investigated the effect of simulated microwave disinfection (SMD) on the linear dimensional changes, hardness and impact strength of acrylic resins under different polymerization cycles. Metal dies with referential points were embedded in flasks with dental stone. Samples of Classico and Vipi acrylic resins were made following the manufacturers' recommendations. The assessed polymerization cycles were: A-- water bath at 74ºC for 9 h; B-- water bath at 74ºC for 8 h and temperature increased to 100ºC for 1 h; C-- water bath at 74ºC for 2 h and temperature increased to 100ºC for 1 h;; and D-- water bath at 120ºC and pressure of 60 pounds. Linear dimensional distances in length and width were measured after SMD and water storage at 37ºC for 7 and 30 days using an optical microscope. SMD was carried out with the samples immersed in 150 mL of water in an oven (650 W for 3 min). A load of 25 gf for 10 sec was used in the hardness test. Charpy impact test was performed with 40 kpcm. Data were submitted to ANOVA and Tukey's test (5%). The Classico resin was dimensionally steady in length in the A and D cycles for all periods, while the Vipi resin was steady in the A, B and C cycles for all periods. The Classico resin was dimensionally steady in width in the C and D cycles for all periods, and the Vipi resin was steady in all cycles and periods. The hardness values for Classico resin were steady in all cycles and periods, while the Vipi resin was steady only in the C cycle for all periods. Impact strength values for Classico resin were steady in the A, C and D cycles for all periods, while Vipi resin was steady in all cycles and periods. SMD promoted different effects on the linear dimensional changes, hardness and impact strength of acrylic resins submitted to different polymerization cycles when after SMD and water storage were considered.

Effect Of Simulated Microwave Disinfection On The Linear Dimensional Change, Hardness And Impact Strength Of Acrylic Resins Processed By Different Polymerization Cycles.

This study investigated the effect of simulated microwave disinfection (SMD) on the linear dimensional changes, hardness and impact strength of acrylic resins under different polymerization cycles. Metal dies with referential points were embedded in flasks with dental stone. Samples of Classico and Vipi acrylic resins were made following the manufacturers' recommendations. The assessed polymerization cycles were: A) water bath at 74 ºC for 9 h; B) water bath at 74 ºC for 8 h and temperature increased to 100 ºC for 1 h; C) water bath at 74 ºC for 2 h and temperature increased to 100 ºC for 1 h; and D) water bath at 120 ºC and pressure of 60 pounds. Linear dimensional distances in length and width were measured after SMD and water storage at 37 ºC for 7 and 30 days using an optical microscope. SMD was carried out with the samples immersed in 150 mL of water in an oven (650 W for 3 min). A load of 25 gf for 10 s was used in the hardness test. Charpy impact test was performed with 40 kpcm. Data were submitted to ANOVA and Tukey's test (5%). The Classico resin was dimensionally steady in length in the A and D cycles for all periods, while the Vipi resin was steady in the A, B and C cycles for all periods. The Classico resin was dimensionally steady in width in the C and D cycles for all periods, and the Vipi resin was steady in all cycles and periods. The hardness values for Classico resin were steady in all cycles and periods, while the Vipi resin was steady only in the C cycle for all periods. Impact strength values for Classico resin were steady in the A, C and D cycles for all periods, while Vipi resin was steady in all cycles and periods. SMD promoted different effects on the linear dimensional changes, hardness and impact strength of acrylic resins submitted to different polymerization cycles when after SMD and water storage were considered.

Comparative In vitro Mechanical Evaluation Of Techniques Using A 2.0 mm Locking Fixation System For Simulated Fractures Of The Mandibular Body.

To perform a comparative evaluation of the mechanical resistance of simulated fractures of the mandibular body which were repaired using different fixation techniques with two different brands of 2.0 mm locking fixation systems. Four aluminum hemimandibles with linear sectioning simulating a mandibular body fracture were used as the substrates and were fixed using the two techniques and two different brands of fixation plate. These were divided into four groups: groups I and II were fixed with one four-hole plate, with four 6 mm screws in the tension zone and one four-hole plate, with four 10 mm screws in the compression zone; and groups III and IV were fixed with one four-hole plate with four 6 mm screws in the neutral zone. Fixation plates manufactured by Tóride were used for groups I and III, and by Traumec for groups II and IV. The hemimandibles were submitted to vertical, linear load testing in an Instron 4411 servohydraulic mechanical testing unit, and the load/displacement (3 mm, 5 mm and 7 mm) and the peak loads were measured. Means and standard deviations were evaluated applying variance analysis with a significance level of 5%. The only significant difference between the brands was seen at displacements of 7 mm. Comparing the techniques, groups I and II showed higher mechanical strength than groups III and IV, as expected. For the treatment of mandibular linear body fracture, two locking plates, one in the tension zone and another in the compression zone, have a greater mechanical strength than a single locking plate in the neutral zone.

[access To Information About How To Prevent Oral Problems Among School Children In The Public School Network].

The scope of this study is to identify the prevalence of access to information about how to prevent oral problems among schoolchildren in the public school network, as well as the factors associated with such access. This is a cross-sectional and analytical study conducted among 12-year-old schoolchildren in a Brazilian municipality with a large population. The examinations were performed by 24 trained dentists and calibrated with the aid of 24 recorders. Data collection occurred in 36 public schools selected from the 89 public schools of the city. Descriptive, univariate and multiple analyses were conducted. Of the 2510 schoolchildren included in the study, 2211 reported having received information about how to prevent oral problems. Access to such information was greater among those who used private dental services; and lower among those who used the service for treatment, who evaluated the service as regular or bad/awful. The latter use toothbrush only or toothbrush and tongue scrubbing as a means of oral hygiene and who reported not being satisfied with the appearance of their teeth. The conclusion drawn is that the majority of schoolchildren had access to information about how to prevent oral problems, though access was associated with the characteristics of health services, health behavior and outcomes.

Burnout Syndrome In Nursing Assistants Of A Public Hospital In The State Of São Paulo.

The burnout syndrome is a psychosocial phenomenon that arises as a response to chronic interpersonal stressors present at work. There are many aspects that make nursing assistants vulnerable to chronic stress situations that may lead to burnout, highlighting the low degree of autonomy in the healthcare staff and spending more in direct contact with patients. To assess the prevalence of the burnout syndrome in nursing assistants in a public hospital, as well as its association with socio-demographic and professional variables. A socio-demographic and professional questionnaire and the Maslach Burnout Inventory (MBI-SS) were applied to 534 nursing assistants. The prevalence of burnout syndrome among nursing assistants was 5.9%. High emotional exhaustion was observed in 23.6%, 21.9% showed high depersonalization, and 29.9% low professional achievement. It was found statistically significant associations between emotional exhaustion, job sector and marital status; depersonalization, having children and health problems; low professional achievement and job sector and number of jobs. There was association between job satisfaction and the three dimensions. Professionals working in the health area must pay intense and extended attention to people who are dependent upon others. The intimate contact of the nursing assistants with hard-to-handle patients, as well as being afraid to make mistakes in healthcare are additional chronic stress factors and burnout syndrome cases related in this study.

[need For Orthodontic Treatment Among Brazilian Adolescents: Evaluation Based On Public Health].

To identify the prevalence and the severity of malocclusions and to analyze factors associated with the need for orthodontic treatment of Brazilian adolescents. This exploratory, cross-sectional study was carried out based on secondary data from the national epidemiological survey on oral health in Brazil (2002-2003). Socio-demographic conditions, self-perception, and the existence and degree of malocclusion, using the Dental Aesthetic Index, were evaluated in 16,833 adolescent Brazilians selected by probabilistic sample by conglomerates. The dependent variable - need orthodontic treatment - was estimated from the severity of malocclusion. The magnitude and direction of the association in bivariate and multivariate analyzes from a Robust Poisson regression was estimated RESULTS: The majority of the adolescents needed orthodontic treatment (53.2%). In the multivariate analysis, the prevalence of the need for orthodontic treatment was larger among females, non-whites, those that perceived a need for treatment, and those that perceived their appearance as normal, bad, or very bad. The need for orthodontic treatment was smaller among those that lived in the Northeast and Central West macro-regions compared to those living in Southeast Brazil and it was also smaller among those that perceived their chewing to be normal or their oral health to be bad or very bad. There was a high prevalence of orthodontic treatment need among adolescents in Brazil and this need was associated with demographic and subjective issues. The high prevalence of orthodontic needs in adolescents is a challenge to the goals of Brazil's universal public health system.

In Adolescents With Epilepsy, High Scores Of Anxiety And Depression Are Associated With Occurrence Of Seizures In Public Places.

Objective To assess depression and anxiety symptoms of adolescents with epilepsy compared with adolescents without epilepsy. Method The study sample consisted of: case participants (50 subjects) attending the pediatric epilepsy clinic of a tertiary hospital and control participants (51 subjects) from public schools. The instruments utilized were: identification card with demographic and epilepsy data, Beck Depression Inventory and State-Trait Anxiety Inventory. Results No significant differences were founded between the groups regarding scores for depression and anxiety symptoms but both groups presented moderate scores of anxiety. A correlation was found between low scores anxiety and not frequent seizures, low scores anxiety and perception of seizure control, high scores of anxiety and depression and occurrence of seizures in public places. Conclusion Low scores of anxiety are associated with not frequent seizures; high scores of anxiety and depression are associated with occurrence of seizures in public places.

Indications For In Vitro Fertilization At A Public Center For Reproductive Health In Campinas, Brazil.

To assess the sociodemographic profile and gynecologic and obstetric characteristics of women referred to a public reference center in Campinas, Brazil, for in vitro fertilization (IVF). Women referred between April 1, 2008, and October 31, 2009, were eligible for inclusion in a cross-sectional study. Participants were interviewed about sociodemographic characteristics, obstetric and gynecologic history, and etiologic factors resulting in the referral. Preliminary clinical examinations performed elsewhere were evaluated. A total of 176 women were included, of whom 129 (73.3%) presented with tubal factor infertility. Tubal ligation had been performed in 66 (37.5%) women. Overall, 121 (68.8%) women were aged 30 years old or less, 110 (62.5%) had received more than 8 years of schooling, 123 (69.6%) had had infertility for up to 5 years, and 99 (56.3%) did not have any children. Moreover, 25 (14.2%) women had endometriosis and 25 (14.2%) had a male factor issue. A previous ectopic pregnancy was reported for 20 (11.4%) women and pelvic inflammatory disease for 49 (27.8%). Tubal factor infertility was the most common indication for IVF. Preventive measures are required, in addition to policies that ensure access to high-complexity treatments in the public sector.

Development Plates For Stable Internal Fixation: Study Of Mechanical Resistance In Simulated Fractures Of The Mandibular Condyle.

To develop Y-shaped plates with different thicknesses to be used in simulated fractures of the mandibular condyle. Ten plates were developed in Y shape, containing eight holes, and 30 synthetic polyurethane mandible replicas were developed for the study. The load test was performed on an Instron Model 4411 universal testing machine, applying load in the mediolateral and anterior-posterior positions on the head of the condyle. Two-way ANOVA with Tukey testing with a 5% significance level was used. It was observed that when the load was applied in the medial-lateral plate of greater thickness (1.5 mm), it gave the highest strength, while in the anteroposterior direction, the plate with the highest resistance was of the lesser thickness (0.6 mm). A plate with a thickness of 1.5 mm was the one with the highest average value for all displacements. In the anteroposterior direction, the highest values of resistance were seen in the displacement of 15 mm. After comparing the values of the biomechanical testing found in the scientific literature, it is suggested that the use of Y plates are suitable for use in subcondylar fractures within the limitations of the study.

Um estudo das políticas públicas de lazer de Brotas/SP = : Brotas leisure public policies, São Paulo State

Universidade Estadual de Campinas . Faculdade de Educação Física

O setor privado sem fins lucrativos e as políticas públicas de esporte e lazer (2008-2011) = : The non-profitable private sector and the public policies for sport and leisure (2008-2011)

Universidade Estadual de Campinas . Faculdade de Educação Física