High Frequency Class DE Converter Using a Multilayer Coreless PCB Transformer

In modern power electronics equipment, it is desirable to design a low profile, high power density, and fast dynamic response converter. Increases in switching frequency reduce the size of the passive components such as transformers, inductors, and capacitors which results in compact size and less requirement for the energy storage. In addition, the fast dynamic response can be achieved by operating at high frequency. However, achieving high frequency operation while keeping the efficiency high, requires new advanced devices, higher performance magnetic components, and new circuit topology. These are required to absorb and utilize the parasitic components and also to mitigate the frequency dependent losses including switching loss, gating loss, and magnetic loss. Required performance improvements can be achieved through the use of Radio Frequency (RF) design techniques. To reduce switching losses, resonant converter topologies like resonant RF amplifiers (inverters) combined with a rectifier are the effective solution to maintain high efficiency at high switching frequencies through using the techniques such as device parasitic absorption, Zero Voltage Switching (ZVS), Zero Current Switching (ZCS), and a resonant gating. Gallium Nitride (GaN) device technologies are being broadly used in RF amplifiers due to their lower on- resistance and device capacitances compared with silicon (Si) devices. Therefore, this kind of semiconductor is well suited for high frequency power converters. The major problems involved with high frequency magnetics are skin and proximity effects, increased core and copper losses, unbalanced magnetic flux distribution generating localized hot spots, and reduced coupling coefficient. In order to eliminate the magnetic core losses which play a crucial role at higher operating frequencies, a coreless PCB transformer can be used. Compared to the conventional wire-wound transformer, a planar PCB transformer in which the windings are laid on the Printed Board Circuit (PCB) has a low profile structure, excellent thermal characteristics, and ease of manufacturing. Therefore, the work in this thesis demonstrates the design and analysis of an isolated low profile class DE resonant converter operating at 10 MHz switching frequency with a nominal output of 150 W. The power stage consists of a class DE inverter using GaN devices along with a sinusoidal gate drive circuit on the primary side and a class DE rectifier on the secondary side. For obtaining the stringent height converter, isolation is provided by a 10-layered coreless PCB transformer of 1:20 turn’s ratio. It is designed and optimized using 3D Finite Element Method (FEM) tools and radio frequency (RF) circuit design software. Simulation and experimental results are presented for a 10-layered coreless PCB transformer operating in 10 MHz.

Toxicity of polychlorinated biphenyls and N-phenyl-1-naphthylamine in the juvenile turtle, Chelydra serpentina

Polychlorinated biphenyls (PCBs) and substituted phenylamine antioxidants (SPAs) are two chemical groups that have been used in multiple Canadian industrial processes. Despite the production ban of PCBs in North America in 1977, they are still ubiquitous in the environment and in wildlife tissues. Previous studies of fish, amphibians, birds, and mammals have shown that PCBs are toxic and act as endocrine disruptors. In contrast, SPAs, specifically N-phenyl-1-naphthylamine (PANA), have received very little attention despite their current use in Canada and their expected environmental releases. The effects of PCB and PANA exposures in reptiles remain unknown thus, juvenile Chelydra serpentina were used in this thesis as a model vertebrate to fill in missing toxicity research gaps due to their importance as an environmental indicator. First, food pellets were spiked at an environmentally relevant concentration of the PCB mixture Aroclor 1254 (A1254) to model hepatic bioaccumulation (0.45 μg/g A1254 for 31 days) and depuration (clean food for 50 days) of PCBs in turtles. No significant differences in PCB concentrations were observed between the control and treated animals, suggesting that juvenile turtles exposed to environmentally relevant concentrations of PCBs can likely detoxify low concentrations of PCBs. Additionally, two dose-response experiments were performed using A1254 or PANA spiked food (0-12.7 μg/g and 0-3,446 μg/g, respectively) to determine hepatic toxicity and bioaccumulation in juvenile C. serpentina. An increase in hepatic cyp1a was observed when exposed to the highest dose of both chemicals: 1) for A1254, induction correlated to the significant increase in hepatic PCB congeners that are known to be metabolized by CYP1A; and 2) for PANA, induction suggested that CYP1A has a potential role in its detoxification. PCBs are known endocrine disruptors, but no significant changes were observed for both thyroid receptors (alpha and beta) or by estrogen and androgen receptors. This lack of response, also noted in the PANA exposure, suggests that C. serpentina is less sensitive to endocrine disruption than other vertebrates. Furthermore, the expression of genes involved in cellular stress was not altered in PCB and PANA exposed animals, supporting the resilience of turtles to oxidative stress. This is the first study to demonstrate the toxicity of PCBs and PANA in C. serpentina, demonstrating the turtle’s high tolerance to contamination.