A influência do uso do "clamp" ou braçadeira no acúmulo de coágulos em drenos pleurais tubulares

OBJETIVO: Conduziu-se este estudo prospectivo a fim de avaliar-se a influência do uso da braçadeira sobre o acúmulo de coágulos dentro dos drenos pleurais. MÉTODO: Os drenos pleurais foram pesados logo após sua retirada, lavados e secados e pesados novamente. A diferença entre a primeira e a segunda pesagem foi admitida como a quantidade de coágulos acumulada. RESULTADOS: Houve maior acúmulo de coágulo nos drenos temporariamente obstruídos por braçadeira em relação àqueles não obstruídos. CONCLUSÃO: Notou-se, neste estudo, maior acúmulo de coágulo dentro de drenos pleurais obstruídos, mesmo que intermitentemente, o que pode levar ao mau funcionamento de todo o sistema de drenagem. A discussão sobre o correto uso dos drenos pleurais deve ser constante e fazer parte de programas de educação continuada para médicos e enfermagem, a fim de que este sistema, amplamente utilizado e altamente eficiente, seja otimizado.

A quality and cost approach for welding process selection

The aim of this work was to propose, apply and evaluate a methodical approach to select welding processes in a productive environment based on market requirements of Quality and Costs. A case study was used. The welds were carried out in laboratory, simulating the joint conditions of a manufacturer and using several welding processes: SMAW, GTAW, pulsed GTAW, GMAW with CO2 and Ar based shielding gases and pulsed GMAW. For Quality analysis geometrical aspects of the beads were considered and for Cost analysis, welding parameters and consumable prices. Quantitative indices were proposed and evaluated. After that, evaluation of both Quality and Costs was done, showing to be possible to select the most suitable welding process to a specific application, taking into account the market conditions of a company.

Welding current effect on diffusible hydrogen content in flux cored arc weld metal

The application of flux cored arc welding (FCAW) has increased in manufacturing and fabrication. Even though FCAW is well known for its good capability in producing quality welds, few reports have been published on the cause of the relatively high diffusible hydrogen content in the weld metal and its relation with the ingredients used in the wire production and with the welding parameters (mainly welding current). This paper describes experiments where data obtained from weld metal diffusible hydrogen analysis, metal droplet collection, and high-speed recording of metal droplet transfer were used to evaluate the effect of welding current on diffusible hydrogen content in the weld metal. The results from gas chromatography analysis showed that weld metal hydrogen content indeed increased with welding current. A polynomial regressional analysis concluded that hydrogen increase with current was better described by a linear function with proportional constant of approximately 0.7 or 70%. Different from the GMA welding transfer behavior, statistical analysis showed only a small increase in metal droplet size with increasing current. The metal transfer mode remained in the globular range for currents between 100 and 150 A. The most surprising findings were with the high-speed cinematography recording. Observing the high speed movies, it was possible to see that at low current, "unmelted" flux sporadically touched the weld pool but at higher current, the flux remained touching the weld pool during the whole time of droplet formation and transfer. It is believed that since the flux has ingredients that contain hydrogen, hydrogen passes through the arc undisturbed, going to the weld bead intact and increasing the hydrogen content in the weld metal. Another important observation is regarding to droplet size. Droplet size increased with increasing current because forces from decomposed gases from the flux could sustain the droplets, retarding their transfer and allowing them to grow.

Patch-clamp detection of macromolecular translocation along nuclear pores

The present paper reviews the application of patch-clamp principles to the detection and measurement of macromolecular translocation along the nuclear pores. We demonstrate that the tight-seal 'gigaseal' between the pipette tip and the nuclear membrane is possible in the presence of fully operational nuclear pores. We show that the ability to form a gigaseal in nucleus-attached configurations does not mean that only the activity of channels from the outer membrane of the nuclear envelope can be detected. Instead, we show that, in the presence of fully operational nuclear pores, it is likely that the large-conductance ion channel activity recorded derives from the nuclear pores. We conclude the technical section with the suggestion that the best way to demonstrate that the nuclear pores are responsible for ion channel activity is by showing with fluorescence microscopy the nuclear translocation of ions and small molecules and the exclusion of the same from the cisterna enclosed by the two membranes of the envelope. Since transcription factors and mRNAs, two major groups of nuclear macromolecules, use nuclear pores to enter and exit the nucleus and play essential roles in the control of gene activity and expression, this review should be useful to cell and molecular biologists interested in understanding how patch-clamp can be used to quantitate the translocation of such macromolecules into and out of the nucleus

Inibição da corrente de cálcio tipo L por tramadol e enantiômeros em miócitos cardíacos de ratos

FUNDAMENTO: O tramadol é um analgésico de ação central cujo mecanismo de ação envolve a ativação de um receptor opioide. Anteriormente, mostramos que o tramadol e seus enantiômeros apresentavam um efeito inotrópico negativo sobre o músculo papilar no qual o (+)-enantiômero era mais potente que (-)- e (±)-tramadol. OBJETIVO: No presente trabalho, investigamos os efeitos do tramadol e seus enantiômeros na corrente de cálcio tipo L (I Ca-L). MÉTODOS: Os experimentos foram realizados em miócitos ventriculares isolados de ratos Wistar utilizando a técnica de patch-clamp com configuração de célula inteira. RESULTADOS: O tramadol (200 µM) reduziu a amplitude de pico do I Ca-L em potenciais de 0 a +50 mV. Em 0 mV, a I Ca-L foi reduzida em 33,7 ± 7,2%. (+)- e (-)-tramadol (200 µM) produziram uma inibição semelhante da I Ca-L, na qual a amplitude do pico foi reduzida em 64,4 ± 2,8% e 68,9 ± 5,8%, respectivamente a 0 mV (P > 0,05). O tramadol, (+)- e (-)-tramadol mudaram a inativação de estado estacionário de I Ca-L para potenciais de membrana mais negativos. Além disso, tramadol e (+)-tramadol alteraram significativamente a curva de recuperação dependente de tempo da I Ca-L para a direita e reduziram a recuperação de I Ca-L da inativação. A constante de tempo foi aumentada de 175,6 ± 18,6 a 305,0 ± 32,9 ms (P < 0,01) para o tramadol e de 248,1 ± 28,1 ms para 359,0 ± 23,8 ms (P < 0,05) para o (+)-tramadol. O agonista do receptor µ-opioide (DAMGO) não tem nenhum efeito na I Ca-L. CONCLUSÃO: A inibição da I Ca-L induzida por tramadol e seus enantiômeros não teve relação com a ativação de receptores opioides e poderia explicar, pelo menos em parte, seu efeito inotrópico negativo cardíaco.

Electrical Properties of Isolated Cardiomyocytes in a Rat Model of Thiamine Deficiency

In modern society, thiamine deficiency (TD) remains an important medical condition linked to altered cardiac function. There have been contradictory reports about the impact of TD on heart physiology, especially in the context of cardiac excitability. In order to address this particular question, we used a TD rat model and patch-clamp technique to investigate the electrical properties of isolated cardiomyocytes from epicardium and endocardium. Neither cell type showed substantial differences on the action potential waveform and transient outward potassium current. Based on our results we can conclude that TD does not induce major electrical remodeling in isolated cardiac myocytes in either endocardium or epicardium cells.

A new species of Probursata Bravo-Hollis, 1984 (Mogenea: Heteraxinidae: Heteraxininae) parasite of Oligoplites spp. (Osteichthyes: Carangidae) from the coast of the state of Rio de Janeiro, Brazil

Probursata brasiliensis n. sp., a gill filament parasite of carangid fishes, O. palometa (Cuvier), Oligoplites saurus (Bloch & Schneider), and O. saliens (Bloch), from the Brazilian coast, is described and illustrated. The new species differs from Probursata veraecrucis Bravo-Hollis, 1984, the type and only species of this genus by the presence of spines in the auricular expansions of the genital atrium, by the trifurcate supplementary process of the clamp's midsclerite, and by having a larger number of tests and clamps. This is the first record of the genus Probursata Bravo-Hollis, 1984, in the South Atlantic Ocean.

Cardiomyocyte dysfunction during the chronic phase of Chagas disease

Chagas disease, which is caused by the parasite Trypanosoma cruzi, is an important cause of heart failure. We investigated modifications in the cellular electrophysiological and calcium-handling characteristics of an infected mouse heart during the chronic phase of the disease. The patch-clamp technique was used to record action potentials (APs) and L-type Ca2+ and transient outward K+ currents. [Ca2+]i changes were determined using confocal microscopy. Infected ventricular cells showed prolonged APs, reduced transient outward K+ and L-type Ca2+ currents and reduced Ca2+ release from the sarcoplasmic reticulum. Thus, the chronic phase of Chagas disease is characterised by cardiomyocyte dysfunction, which could lead to heart failure.

Estudo da morfologia renal após a oclusão da aorta abdominal infra-renal em ratos

OBJETIVO: Relacionar as alterações morfológicas renais sob microscopia de luz, de ratos submetidos à oclusão de aorta, em modelo que simule a condição clínica de reparação cirúrgica de um aneurisma de aorta abdominal. MÉTODO: Ratos Wistar (N = 60), machos pesando entre 200 e 250g, foram distribuídos em três grupos: I (simulado); II (isquemia); III (isquemia + reperfusão); e cada grupo redistribuído em dois subgrupos: A (30 min); B (60 min). Foi realizada isquemia utilizando clamp vascular (8mm) na aorta abdominal infra-renal de acordo com o grupo estudado. Ao final de cada experimento os animais foram mortos e realizada análise histológica renal cortical e medular (descritiva e morfométrica) através de metodologia convencional (parafina-hematoxilinaeosina). A análise semiquantitativa de lesão tubular e intersticial foi realizada de acordo com o índice de lesão tubular e índice de lesão intersticial. Para a análise estatística foram aplicados os seguintes testes: Mann-Whitney, Kruskal-Wallis, Comparações múltiplas (p < 0,001). RESULTADOS: Observou-se no grupo III alterações histológicas tubulares e intersticiais significantes com relação aos outros grupos (p < 0,001). CONCLUSÕES: A oclusão da aorta abdominal infra-renal em ratos está associada a lesões estruturais renais tanto tubulares quanto intersticiais principalmente na fase de reperfusão.

Parameter optimization of AC rectangular wave outputs for aluminum cold wire GTAW

The objective of this work was to optimize the parameter setup for GTAW of aluminum using an AC rectangular wave output and continuous feeding. A series of welds was carried-out in an industrial joint, with variation of the negative and positive current amplitude, the negative and positive duration time, the travel speed and the feeding speed. Another series was carried out to investigate the isolate effect of the negative duration time and travel speed. Bead geometry aspects were assessed, such as reinforcement, penetration, incomplete fusion and joint wall bridging. The results showed that currents at both polarities are remarkably more significant than the respective duration times. It was also shown that there is a straight relationship between welding speed and feeding speed and this relationship must be followed for obtaining sound beads. A very short positive duration time is enough for arc stability achievement and when the negative duration time is longer than 5 ms its effect on geometry appears. The possibility of optimizing the parameter selection, despite the high inter-correlation amongst them, was demonstrate through a computer program. An approach to reduce the number of variables in this process is also presented.

Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

Local Web Buckling in Tapered Composite Beams: A Parametric Study

Composite flooring systems supported by tapered (varying web depth) beams are very attractive from an economic point of view. However, the tapered beam sections are fabricated from plate by welding, and are susceptible to imperfection effects. These may interact with the localised compressive stress field that is generated in the web at a slope change in the lower flange to cause local web buckling. A substantial parametric study using a non-linear elasto-plastic finite element program and covering practical ranges of the important parameters including the area of the tension flange, taper slope and web thickness is reported. Moment-rotation relations, peak moments and failure mechanisms have been predicted. The validity of the work is supported by the good correlation obtained between the results of the parametric study and experimental data.

Calcium handling by vascular myocytes in hypertension

Calcium ions (Ca2+) trigger the contraction of vascular myocytes and the level of free intracellular Ca2+ within the myocyte is precisely regulated by sequestration and extrusion mechanisms. Extensive evidence indicates that a defect in the regulation of intracellular Ca2+ plays a role in the augmented vascular reactivity characteristic of clinical and experimental hypertension. For example, arteries from spontaneously hypertensive rats (SHR) have an increased contractile sensitivity to extracellular Ca2+ and intracellular Ca2+ levels are elevated in aortic smooth muscle cells of SHR. We hypothesize that these changes are due to an increase in membrane Ca2+ channel density and possibly function in vascular myocytes from hypertensive animals. Several observations using various experimental approaches support this hypothesis: 1) the contractile activity in response to depolarizing stimuli is increased in arteries from hypertensive animals demonstrating increased voltage-dependent Ca2+ channel activity in hypertension; 2) Ca2+ channel agonists such as Bay K 8644 produce contractions in isolated arterial segments from hypertensive rats and minimal contraction in those from normotensive rats; 3) intracellular Ca2+ concentration is abnormally increased in vascular myocytes from hypertensive animals following treatment with Ca2+ channel agonists and depolarizing interventions, and 4) using the voltage-clamp technique, the inward Ca2+ current in arterial myocytes from hypertensive rats is nearly twice as large as that from myocytes of normotensive rats. We suggest that an alteration in Ca2+ channel function and/or an increase in Ca2+ channel density, resulting from increased channel synthesis or reduced turnover, underlies the increased vascular reactivity characteristic of hypertension

Connexin domains relevant to the chemical gating of gap junction channels

Most cells exchange ions and small metabolites via gap junction channels. These channels are made of two hemichannels (connexons), each formed by the radial arrangement of six connexin (Cx) proteins. Connexins span the bilayer four times (M1-M4) and have both amino- and carboxy-termini (NT, CT) at the cytoplasmic side of the membrane, forming two extracellular loops (E1, E2) and one inner (IL) loop. The channels are regulated by gates that close with cytosolic acidification (e.g., CO2 treatment) or increased calcium concentration, possibly via calmodulin activation. Although gap junction regulation is still unclear, connexin domains involved in gating are being defined. We have recently focused on the CO2 gating sensitivity of Cx32, Cx38 and various mutants and chimeras expressed in Xenopus oocytes and studied by double voltage clamp. Cx32 is weakly sensitive to CO2, whereas Cx38 is highly sensitive. A Cx32 chimera containing the second half of the inner loop (IL2) of Cx38 was as sensitive to CO2 as Cx38, indicating that this domain plays an important role. Deletion of CT by 84% did not affect CO2 sensitivity, but replacement of 5 arginines (R) with sparagines (N) at the beginning of CT (C1) greatly enhanced the CO2 sensitivity of Cx32. This suggests that whereas most of CT is irrelevant, positive charges of C1 maintain the CO2 sensitivity of Cx32 low. As a hypothesis we have proposed a model that involves charge interaction between negative residues of the beginning of IL1 and positive residues of either C1 or IL2. Open and closed channels would result from IL1-C1 and IL1-IL2 interactions, respectively

Monosodium glutamate (MSG)-obese rats develop glucose intolerance and insulin resistance to peripheral glucose uptake

Different levels of insulin sensitivity have been described in several animal models of obesity as well as in humans. Monosodium glutamate (MSG)-obese mice were considered not to be insulin resistant from data obtained in oral glucose tolerance tests. To reevaluate insulin resistance by the intravenous glucose tolerance test (IVGTT) and by the clamp technique, newborn male Wistar rats (N = 20) were injected 5 times, every other day, with 4 g/kg MSG (N = 10) or saline (control; N = 10) during the first 10 days of age. At 3 months, the IVGTT was performed by injecting glucose (0.75 g/kg) through the jugular vein into freely moving rats. During euglycemic clamping plasma insulin levels were increased by infusing 3 mU . kg-1 . min-1 of regular insulin until a steady-state plateau was achieved. The basal blood glucose concentration did not differ between the two experimental groups. After the glucose load, increased values of glycemia (P<0.001) in MSG-obese rats occurred at minute 4 and from minute 16 to minute 32. These results indicate impaired glucose tolerance. Basal plasma insulin levels were 39.9 ± 4 µU/ml in control and 66.4 ± 5.3 µU/ml in MSG-obese rats. The mean post-glucose area increase of insulin was 111% higher in MSG-obese than in control rats. When insulinemia was clamped at 102 or 133 µU/ml in control and MSG rats, respectively, the corresponding glucose infusion rate necessary to maintain euglycemia was 17.3 ± 0.8 mg . kg-1 . min-1 for control rats while 2.1 ± 0.3 mg . kg-1 . min-1 was sufficient for MSG-obese rats. The 2-h integrated area for total glucose metabolized, in mg . min . dl-1, was 13.7 ± 2.3 vs 3.3 ± 0.5 for control and MSG rats, respectively. These data demonstrate that MSG-obese rats develop insulin resistance to peripheral glucose uptake