DEVELOPMENT AND VALIDATION OF ANALYTICAL METHOD FOR PALM OIL DETERMINATION IN MICROCAPSULES PRODUCED BY COMPLEX COACERVATION

The microencapsulation of palm oil may be a mechanism for protecting and promoting the controlled release of its bioactive compounds. To optimize the microencapsulation process, it is necessary to accurately quantify the palm oil present both external and internal to the microcapsules. In this study, we developed and validated a spectrophotometric method to determine the microencapsulation efficiency of palm oil by complex coacervation. We used gelatin and gum arabic (1:1) as wall material in a 5% concentration (w/v) and palm oil in the same concentration. The coacervates were obtained at pH 4.0 ± 0.01, decanted for 24 h, frozen (−40 ºC), and lyophilized for 72 h. Morphological analyzes were then performed. We standardized the extraction of the external palm oil through five successive washes with an organic solvent. We then explored the best method for rupturing the microcapsules. After successive extractions with hexane, we determined the amount of palm oil contained in the microcapsules using a spectrophotometer. The proposed method was shown to be of low cost, fast, and easy to implement. In addition, in the validation step, we confirmed the method to be safe and reliable, as it proved to be specific, accurate, precise, and robust.

Docosahexaenoic acid ethyl esther (DHAEE) microcapsule production by spray-drying: optimization by experimental design

Docosahexaenoic acid is an essential polyunsaturated fatty acid with important metabolic activities. Its conjugated double bonds make it susceptible to decomposition. Its stability may be improved through fatty acid entrapment with a spray-drying technique; however, the many parameters involved in this technique must be considered to avoid affecting the final product quality. Therefore, this study aimed to evaluate the entrapment conditions and yields of fish oil enriched with docosahexaenoic acid ethyl ester. Microcapsules were obtained from Acacia gum using a spray-drying technique. The experimental samples were analyzed by chromatography and delineated by Statistica software, which found the following optimum entrapment conditions: an inlet temperature of 188 °C; 30% core material; an N2 flow rate of 55 mm; and a pump flow rate of 12.5 mL/minute. These conditions provided a 66% yield of docosahexaenoic acid ethyl ester in the oil, corresponding to 19.8% of entrapped docosahexaenoic acid ethyl ester (w/w). This result was considered significant since 30% corresponded to wall material.

Retention of short chain fatty acids under drying and storage conditions

Cheese whey permeate was used as a substrate for the fermentation of Propionibacterium freudenreichi PS1 for the production of short chain fatty acids, components of the bio-aroma of Swiss cheese. The liquid bio-aroma was encapsulated by spray drying under different conditions of air inlet temperature and feed rate. A study was carried out on the stability of the bio-aroma during storage in laminated packages at 30 °C for 96 days using the product showing the greatest retention of acetic and propionic acids. The results showed that the best drying conditions were an air entrance temperature of 180 °C and a feed rate of 24 g/min resulting in particles with a smooth surface and few invaginations and micro-fissures. However, 72% of the acetic acid and 80% of the propionic acid were lost during storage showing that the wall material used was inadequate to guarantee product stability.

Microencapsulation of babassu coconut milk

The objective of this study was to obtain babassu coconut milk powder microencapsulated by spray drying process using gum Arabic as wall material. Coconut milk was extracted by babassu peeling, grinding (with two parts of water), and vacuum filtration. The milk was pasteurized at 85 ºC for 15 minutes and homogenized to break up the fat globules, rendering the milk a uniform consistency. A central composite rotatable design with a range of independent variables was used: inlet air temperature in the dryer (170-220 ºC) and gum Arabic concentration (10-20%, w/w) on the responses: moisture content (0.52-2.39%), hygroscopicity (6.98-9.86 g adsorbed water/100g solids), water activity (0.14-0.58), lipid oxidation (0.012-0.064 meq peroxide/kg oil), and process yield (20.33-30.19%). All variables influenced significantly the responses evaluated. Microencapsulation was optimized for maximum process yield and minimal lipid oxidation. The coconut milk powder obtained at optimum conditions was characterized in terms of morphology, particle size distribution, bulk and absolute density, porosity, and wettability.

Influence of spray drying operating conditions on microencapsulated rosemary essential oil properties

Spray drying is an important method used by the food industry in the production of microencapsulated flavors to improve handling and dispersion properties. The objective of this study was to evaluate the influence of the process conditions on the properties of rosemary essential oil microencapsulated by spray drying using gum Arabic as encapsulant. The effects of the wall material concentration (10-30%), inlet air temperature (135-195 ºC), and feed flow rate (0.5-1.0 L.h-1) on the moisture content, hygroscopicity, wettability, solubility, bulk and tapped densities, particle density, flowability, and cohesiveness were evaluated using a 2³ central composite rotational experimental design. Moisture content, hygroscopicity and wettability were significantly affected by the three factors analyzed. Bulk density was positively influenced by the wall material concentration and negatively by the inlet air temperature. Particle density was influenced by the wall material concentration and the inlet air temperature variables, both in a negative manner. As for the solubility, tapped density, flowability, and cohesiveness, the models did not fit the data well. The results indicated that moderate wall material concentration (24%), low inlet air temperature (135 ºC), and moderate feed flow rate (0.7 L.h-1) are the best spray drying conditions.

Microparticles obtained by complex coacervation: influence of the type of reticulation and the drying process on the release of the core material

Microparticles obtained by complex coacervation were crosslinked with glutaraldehyde or with transglutaminase and dried using freeze drying or spray drying. Moist samples presented Encapsulation Efficiency (%EE) higher than 96%. The mean diameters ranged from 43.7 ± 3.4 to 96.4 ± 10.3 µm for moist samples, from 38.1 ± 5.36 to 65.2 ± 16.1 µm for dried samples, and from 62.5 ± 7.5 to 106.9 ± 26.1 µm for rehydrated microparticles. The integrity of the particles without crosslinking was maintained when freeze drying was used. After spray drying, only crosslinked samples were able to maintain the wall integrity. Microparticles had a round shape and in the case of dried samples rugged walls apparently without cracks were observed. Core distribution inside the particles was multinuclear and homogeneous and core release was evaluated using anhydrous ethanol. Moist particles crosslinked with glutaraldehyde at the concentration of 1.0 mM.g-1 protein (ptn), were more efficient with respect to the core retention compared to 0.1 mM.g-1 ptn or those crosslinked with transglutaminase (10 U.g-1 ptn). The drying processes had a strong influence on the core release profile reducing the amount released to all dry samples

Táticas oligopolísticas para controlar mercados e o crescimento das CTNs na indústria de material elétrico do Brasil

A maioria das explicações convencionais da rápida expansão das corporações transnacionais (CTNs) nos países em desenvolvimento atribui seu crescimento à eficiência superior das CTNs em relação a seus competidores domésticos. Uma interpretação alternativa focaliza as estruturas industriais do oligopólio que estão associadas ao investimento transnacional e o poder de mercado das CTNs. Este trabalho explora algumas táticas de mercado e extramercado empregadas pelas CTNs para protegerem sua vantagem monopolística nos países hospedeiros. Usando o exemplo da indústria de material elétrico do Brasil, o artigo considera as conseqüências econômicas de sete formas de conduta de CTN: diretorias entrosadas, indulgência mútua, controle de canais de suprimento, subsidiação mútua e predação, conluio formal e informal, vínculos políticos formais e comportamento de aquisição das CTNs. Conclui-se que nem as barreiras à entrada determinadas pela eficiência, nem as determinadas pela tecnologia são completamente satisfatórias para explicar o crescimento da participação do mercado transnacional; ao menos no caso da indústria de material elétrico do Brasil, o poder de mercado associado ao comportamento da CTN é igualmente, ou talvez mais, importante.

Avaliação de material educativo: adequação de quatro volantes sobre alimentação da criança de 0 a 12 meses de idade

Foi feita, através do Serviço de Educação de Saúde Pública da Secretaria de Estado da Saúde de São Paulo (Brasil), avaliação do tipo pré-teste de material instrucional - quatro volantes sobre alimentação da criança de 0 a 12 meses de idade, utilizados no programa de Assistência à Criança da referida Secretaria, com o objetivo de fornecer subsídios para reformulação deste material. O estudo foi realizado em 18 Centros de Saúde da Região Leste da Grande São Paulo, com uma amostra de 50 mães entrevistadas, clientes das Unidades Sanitárias e 48 funcionários. Investigou-se a compreensão das mães e dos funcionários em relação ao conteúdo do material instrucional e a percepção da viabilidade das práticas recomendadas nos volantes. Os resultados mostraram que em relação a 3 volantes a maioria das mensagens foi interpretada corretamente, sendo que para as mães a "boa compreensão" variou de 80,0% a 96,0% e para o pessoal auxiliar de 90,9% a 100,0%. Quanto à percepção da impossibilidade de se por em prática as orientações - avaliada através de interpretação de caráter projetivo - foi maior entre os funcionários (80,0% e mais) do que entre as mães (em torno de 50%). Identificaram-se algumas barreiras de comunicação e obtiveram-se sugestões que contribuiram para reformulação e melhoria dos materiais.

Educação em saúde para alunos de primeiro grau: avaliação de material para ensino e profilaxia da esquistossomose

Considerando a importância da informação sobre a esquistossomose para alunos de 7 a 15 anos, faixa etária apontada como de alta prevalência em regiões endêmicas e cujos hábitos colaboram para a disseminação da doença, foi elaborado um material de ensino baseado em um texto de conotação literária, o qual foi aplicado em escolas de região considerada foco isolado da doença no Município do Rio de Janeiro (Brasil). Desenvolveu-se uma metodologia de uso do material a ser empregada pelos professores, que resultou eficaz em promover aprendizagem de conceitos e cuidados básicos em relação à esquistossomose. Propõe-se o uso deste processo para outras doenças parasitárias a serem testadas em áreas caracteristicamente endêmicas.

The use of wide-mesh gauze impregnated with lambda-cyhalothrin covering wall openings in huts as a vector control method in Suriname

An alternative vector control method, using lambda-cyhalothrin impregnated wide-mesh gauze covering openings in the walls of the houses was developed in an area in the Eastern part of the interior of Suriname. Experimental hut observations showed that Anopheles darlingi greatly reduced their biting activity (99-100%) during the first 5 months after impregnation. A model assay showed high mortality both of mosquitoes repelled by the gauze as well as of those that succeeded in getting through it. A field application test in 270 huts showed good acceptance by the population and good durability of the applied gauze. After introducing the method in the entire working area, replacing DDT residual housespraying, the malaria prevalence, of 25-37% before application dropped and stabilized at between 5 and 10% within one year. The operational costs were less than those of the previously used DDT housespraying program, due to a 50% reduction in the cost of materials used. The method using widemesh gauze impregnated with lambdacyhalothrin strongly affects the behavior of An. darlingi. It is important to examine the effect of the method on malaria transmission further, since data indirectly obtained suggest substantial positive results.