Prevalence of rubella antibodies in a non-immunized urban population, São Paulo, Brazil

The prevalence of rubella antibodies was evaluated through a ramdom Seroepidemiological survey in 1400 blood samples of 2-14 year old children and in 329 samples of umbilical cord serum. Rubella IgG antibodies were detected by ELISA, and the sera were collected in 1987, five years before the mass vaccination campaign with measles-mumps-rubella vaccine carried out in the city of São Paulo in 1992. A significant increase in prevalence of rubella infection was observed after 6 years of age, and 77% of the individuals aged from 15 to 19 years had detectable rubella antibodies. However, the seroprevalence rose to 90.5% (171/189) in cord serum samples from children whose mothers were 20 to 29 years old, and reached 95.6% in newborns of mothers who were 30 to 34 years old, indicating that a large number of women are infected during childbearing years. This study confirms that rubella infection represents an important Public Health problem in São Paulo city. The data on the seroprevalence of rubella antibodies before the mass vaccination campaign reflects the baseline immunological status of this population before any intervention and should be used to design an adequate vaccination strategy and to assess the Seroepidemiological impact of this intervention.

Migration and urban schistosomiasis. The case of São Lourenço da Mata, Northeast of Brazil

A population-based case-control design was used to investigate the association between migration, urbanisation and schistosomiasis in the Metropolitan Region of Recife, Northeast of Brazil. 1022 cases and 994 controls, aged 10 to 25, were selected. The natives and the migrants who come from endemic areas have a similar risk of infection. On the other hand, the risk of infection of migrants from nonendemic areas seems to be related with the time elapsed since their arrival in São Lourenço da Mata; those who have been living in that urban area for 5 or more years have a risk of infection similar to that of the natives. Those arriving in the metropolitan region of Recife mostly emigrate from "zona da mata" and "zona do agreste" in the state of Pernambuco. Due to the changes in the sugar agro-industry and to the increase in the area used for cattle grazing these workers were driven to villages and cities. The pattern of urbanisation created the conditions for the establishment of foci of transmission in São Lourenço da Mata.

Structure-based drug design studies of the interactions ofent-kaurane diterpenes derived from Wedelia paludosa with the Plasmodium falciparumsarco/endoplasmic reticulum Ca2+-ATPase PfATP6

Malaria is responsible for more deaths around the world than any other parasitic disease. Due to the emergence of strains that are resistant to the current chemotherapeutic antimalarial arsenal, the search for new antimalarial drugs remains urgent though hampered by a lack of knowledge regarding the molecular mechanisms of artemisinin resistance. Semisynthetic compounds derived from diterpenes from the medicinal plant Wedelia paludosawere tested in silico against the Plasmodium falciparumCa2+-ATPase, PfATP6. This protein was constructed by comparative modelling using the three-dimensional structure of a homologous protein, 1IWO, as a scaffold. Compound 21 showed the best docking scores, indicating a better interaction with PfATP6 than that of thapsigargin, the natural inhibitor. Inhibition of PfATP6 by diterpene compounds could promote a change in calcium homeostasis, leading to parasite death. These data suggest PfATP6 as a potential target for the antimalarial ent-kaurane diterpenes.

Interaction between Telenomus remus and Trichogramma pretiosum in the management of Spodoptera spp.

Interaction betweeen Telenomus remus and Trichogramma pretiosum in the management of Spodoptera spp. The use of egg parasitoids is a promising strategy for Integrated Pest Management (IPM), but different species of parasitoids have greater or lesser control efficiency, depending on the pest species. Recently, not only Anticarsia gemmatalis and Pseudoplusia includens but also Spodoptera cosmioides and S. eridania have been among the key Lepidoptera larvae attacking soybeans. This study evaluated the combination of Telenomus remus and Trichogramma pretiosum for parasitism of eggs of the Spodoptera complex, for better control efficiency and broader spectrum of action among the key pests of soybeans. The experiment was carried out under controlled environmental conditions (25 ± 2ºC; 70 ± 10% RH; and 14 h photophase) in a completely randomized experimental design with seven treatments and 10 replicates with S. frugiperda, S. cosmioides and S. eridania eggs. Each replicate consisted of one egg mass of each Spodoptera species, with approximately 100 eggs offered to the parasitoids. The treatments were: 1) 10 females of T. pretiosum; 2) nine females of T. pretiosum and one female of T. remus; 3) eight females of T. pretiosum and two females of T. remus; 4) seven females of T. pretiosum and three females of T. remus; 5) six females of T. pretiosum and four females of T. remus; 6) five females of T. pretiosum and five females of T. remus, and 7) 10 females of T. remus. The parameter evaluated was the percentage of parasitized eggs. Results showed that treatments combining both parasitoid species with only 1 T. remus for each 9 T. pretiosum (10%) and only 2 T. remus for each 8 T. pretiosum (20%) were enough to significantly increase the parasitism observed on eggs of S. cosmioides and S. frugiperda, respectively. This association of T. pretiosum and T. remus in different proportions is very promising for biological control in IPM programs because it provides wide spectrum of control.

Industrial and urban organic wastes increase soil microbial activity and biomass

Microbial processes have been used as indicators of soil quality, due to the high sensitivity to small changes in management to evaluate, e.g., the impact of applying organic residues to the soil. In an experiment in a completely randomized factorial design 6 x 13 + 4, (pot without soil and residue or absolute control) the effect of following organic wastes was evaluated: pulp mill sludge, petrochemical complex sludge, municipal sewage sludge, dairy factory sewage sludge, waste from pulp industry and control (soil without organic waste) after 2, 4, 6, 12, 14, 20, 28, 36, 44, 60, 74, 86, and 98 days of incubation on some soil microbial properties, with four replications. The soil microbial activity was highly sensitive to the carbon/nitrogen ratio of the organic wastes. The amount of mineralized carbon was proportional to the quantity of soil-applied carbon. The average carbon dioxide emanating from the soil with pulp mill sludge, corresponding to soil basal respiration, was 0.141 mg C-CO2 100 g-1 soil h-1. This value is 6.4 times higher than in the control, resulting in a significant increase in the metabolic quotient from 0.005 in the control to 0.025 mg C-CO2 g-1 Cmic h-1 in the soil with pulp mill sludge. The metabolic quotient in the other treatments did not differ from the control (p < 0.01), demonstrating that these organic wastes cause no disturbance in the microbial community.

Changes in a Rhodic Hapludox under no-tillage and urban waste compost in the northwest of Rio Grande do Sul, Brazil

The use of urban waste compost as nutrient source in agriculture has been a subject of investigation in Brazil and elsewhere, although the effects on soil physical and chemical properties and processes are still poorly known. The aim of this study was to evaluate the effect of application of urban waste compost and mineral fertilizer on soil aggregate stability and organic carbon and total nitrogen content of a Rhodic Hapludox under no-tillage in the northwestern region of Rio Grande do Sul, Brazil, in the 2009/2010 and 2010/2011 growing seasons. The experiment was arranged in a 2 × 6 (seasons and fertilization) factorial in a randomized complete block design with four replications. The factor time consisted of two growing seasons (sunflower in 2009/10 and maize in 2010/11) and the factor fertilization of five rates of urban waste compost (0, 25, 50, 75 and 100 m³ ha-1), and mineral fertilizer. Soil samples were collected from the 0.0-0.10 m layer to determine aggregate stability (mean weight and geometric diameter), soil organic carbon (SOC) and total nitrogen (TN). Rates of up to 75 m³ ha-1 of urban waste compost, after two years of application to no-tillage maize and sunflower, improved aggregation compared to mineral fertilization in a Rhodic Hapludox. After the second crop, the SOC and TN contents increased linearly with the levels of urban waste compost.

Genotype and environment interaction on soybean yield in Mato Grosso State, Brazil

The objective of this work was to investigate the genotype-environment interaction in Mato Grosso State, MT. The relative importance of locations, years, sowing dates and cultivars and their interactions was analyzed from data collected in regional yield trials performed in a randomized complete block design with four replications, from 1994-1995 through 1999-2000, in nine locations and two sowing dates. Individual and pooled analyses of variance over years and locations were performed. Complementary analyses of variances partitioned MT State in two main and five smaller regions, respectively: North and South of Cuiabá; and MT-South-A (Pedra Preta area), MT-South-B (Rondonópolis and Itiquira), MT-East (Primavera do Leste and Campo Verde), MT-Central (Nova Mutum, Lucas do Rio Verde and Sorriso) and MT-Parecis (Campo Novo dos Parecis and Sapezal). Locations are relatively more important than years for yield testing soybeans in the MT State, therefore, investment should be made in increasing locations rather than years to improve experimental precision. Partitioning the MT State into regions has little impact on soybean yield testing results and, consequently, on the efficiency of the soybean breeding program in the State. Breeding genotypes with broad adaptation for the MT State is an efficient strategy for cultivar development.

Genotype by environment interaction for seed yield per plant in rapeseed using AMMI model

The objective of this study was to assess genotype by environment interaction for seed yield per plant in rapeseed cultivars grown in Northern Serbia by the AMMI (additive main effects and multiplicative interaction) model. The study comprised 19 rapeseed genotypes, analyzed in seven years through field trials arranged in a randomized complete block design, with three replicates. Seed yield per plant of the tested cultivars varied from 1.82 to 19.47 g throughout the seven seasons, with an average of 7.41 g. In the variance analysis, 72.49% of the total yield variation was explained by environment, 7.71% by differences between genotypes, and 19.09% by genotype by environment interaction. On the biplot, cultivars with high yield genetic potential had positive correlation with the seasons with optimal growing conditions, while the cultivars with lower yield potential were correlated to the years with unfavorable conditions. Seed yield per plant is highly influenced by environmental factors, which indicates the adaptability of specific genotypes to specific seasons.

Evaluation of the influence of base and alkyl bromide on synthesis of pyrazinoic acid esters through fatorial design

Pyrazinoic acid esters have been synthesized as prodrugs of pyrazinoic acid. In the literature, its preparation is reported through the reaction of pyrazinoyl chloride with alcohols and the reaction with DCC/DMAP. In this work, it is reported a 2² factorial design to evaluate the preparation of these esters through the substitution of alkyl bromides with carboxylate anion. The controlled factors were alkyl chain length of bromides (ethyl and hexyl) and the used base (triethylamine and DBU). Results revealed that the used base used has significant effect on yield, and alkyl bromide used has neither significant influence, nor its interaction effect with base.

Use of experimental design in the optimisation of a solid phase preconcentration system for Cobalt determination by GFAAS

In this work is proposed a solid phase preconcentration system of Co2+ ions and its posterior determination by GFAAS in which fractional factorial design and response surface methodology (RSM) were used for optimization of the variables associated with preconcentration system performance. The method is based on cobalt extraction as a complex Co2+-PAN (1:2) in a mini-column of polyurethane foam (PUF) impregnated with 1-(2-pyridylazo)-naphthol (PAN) followed by elution with HCl solution and its determination by GFAAS. The chemical and flow variables studied were pH, buffer concentration, eluent concentration and preconcentration and elution flow rates. Results obtained from fractional factorial design 2(5-1) showed that only the variables pH, buffer concentration and interaction (pH X buffer concentration) based on analysis of variance (ANOVA) were statistically significant at 95% confidence level. Under optimised conditions, the method provided an enrichment factor of 11.6 fold with limit of detection and quantification of 38 and 130 ng L-1, respectively, and linear range varying from 0.13 to 10 µg L-1. The precision (n = 9) assessed by relative standard deviation (RSD) was respectively 5.18 and 2.87% for 0.3 and 3.0 µg L-1 cobalt concentrations.

Modeling of the Fluid-Structure Interaction in Inelastic Piping Systems

In many engineering applications, compliant piping systems conveying liquids are subjected to inelastic deformations due to severe pressure surges such as plastic tubes in modern water supply transmission lines and metallic pipings in nuclear power plants. In these cases the design of such systems may require an adequate modeling of the interactions between the fluid dynamics and the inelastic structural pipe motions. The reliability of the prediction of fluid-pipe behavior depends mainly on the adequacy of the constitutive equations employed in the analysis. In this paper it is proposed a systematic and general approach to consistently incorporate different kinds of inelastic behaviors of the pipe material in a fluid-structure interaction analysis. The main feature of the constitutive equations considered in this work is that a very simple numerical technique can be used for solving the coupled equations describing the dynamics of the fluid and pipe wall. Numerical examples concerning the analysis of polyethylene and stainless steel pipe networks are presented to illustrate the versatility of the proposed approach.