Differences on allocation of available resources, in growth, reproduction, and survival, in an exotic gastropod of Physidae compared to an endemic one

Physa acuta Draparnaud, 1805 is an invasive gastropod that can affect local species. In Argentina, it is widespread and abundant, even in environments inhabited by the native species Stenophysa marmorata Guilding, 1828. Its predominance raises the question whether this could be explained by a more successful energy allocation in functional requirements (growth, reproduction and survival) compared to S. marmorata. This study was aimed at comparing growth rates, as well as survival and fecundity, between both species under laboratory conditions. Individuals born on the same day were grouped in four per aquaria and kept under controlled conditions of food, light, and temperature. Snails were weekly measured (maximum shell length), and growth rates were calculated using the Von Bertalanffy's equation. The number of eggs and survivors were grouped by week. Stenophysa marmorata was larger at birth than Physa acuta and invested more energy in growth, delaying sexual maturity. This resulted in a disadvantage in fecundity and survival compared to P. acuta, which had a lower growth rate but matured earlier and survived longer. Furthermore, the growth of P. acuta was not affected by reproduction, its reproductive period was longer, consequently with more eggs laid than S. marmorata.

Intestinal parasites in Iaualapiti indians from Xingu Park, Mato Grosso, Brazil

Brine flotation and gravity sedimentation coproscopical examinations were performed in stool samples from 69 of the 147 Iaualapiti Indians of the Xingu Park, Mato Grosso State, Brazil. Intestinal [arasites were present in 89.9% of the population examined. High rates of prevalence were found for some parasite species. Ancylostomidae, 82.6%; Enterobius vermicularis, 26.1%; Ascaris lumbricoides, 20.3%; and Entamoeba coli, 68.1%. Infection by Trichuris trichuria, Schistosoma mansoni, Taenia spp. and Hymenolepis nana was not detected. Helminth's prevalence in children aged one year or less was comparatively low (33.3%). Quantitative coproscopy was done in positive samples for Ascaris and Ancylostomidae and the results expressed in eggs per gram of feces (EPG). Quantitative results revealed that worm burdens are very low and overdispersed in this Indian tribe, a previously unreported fact.

Genetic epidemiology of fecal egg excretion during Schistosoma mansoni infection in an endemic area in Minas Gerais, Brazil

There is considerable variation in the level of fecal egg excretion during Schistosoma mansoni infections. Within a single endemic area, the distribution of egg counts is typically overdispersed, with the majority of eggs excreted coming from a minority of residents. The purpose of this study was to quantify the influence of genetic factors on patterns of fecal egg excretion in a rural study sample in Brazil. Individual fecal egg excretions, expressed in eggs per gram of feces, were determined by the Kato-Katz method on stool samples collected on three different days. Detailed genealogic information was gathered at the time of sampling, which allowed assignment of 461 individuals to 14 pedigrees containing between 3 and 422 individuals. Using a maximum likelihood variance decomposition approach, we performed quantitative genetic analyses to determine if genetic factors could partially account for the observed pattern of fecal egg excretion. The quantitative genetic analysis indicated that between 21-37% of the variation in S. mansoni egg counts was attributable to additive genetic factors and that shared environment, as assessed by common household, accounted for a further 12-21% of the observed variation. A maximum likelihood heritability (h²) estimate of 0.44 ± 0.14 (mean ± SE) was found for the 9,604 second- and higher-degree pairwise relationships in the study sample, which is consistent with the upper limit (37%) of the genetic factor determined in the variance decomposition analysis. These analyses point to the significant influence of additive host genes on the pattern of S. mansoni fecal egg excretion in this endemic area.

Meloidogyne javanica control by Pochonia chlamydosporia, Gracilibacillus dipsosauri and soil conditioner in tomato

Organic matter plays a fundamental role in the antagonistic activity of microorganisms against phytonematode populations on the soil. In this study, the compatibility between the fungus Pochonia chlamydosporia (Pc-12) and the rhizobacterium Gracilibacillus dipsosauri (MIC 14) was evaluated in vitro, as well as the effect of the fungus at the concentration of 5,000 chlamydospores per gram of soil, rhizobacterium at 4.65 x 10(9) cells/g of soil, and the soil conditioner Ribumin® at 10 g/pot, either alone or in combination, against Meloidogyne javanica population in tomato plants (3,000 eggs/pot). A suspension of water or Ribumin® alone was applied on the soil as negative control, while a suspension of nematode eggs was applied as positive control. The reduction in the number of galls in roots per plant was 48 and 41% for the treatments Ribumin + MIC 14 + Pc-12 and MIC 14 + Pc-12, respectively. Regarding to the number of eggs per plant, MIC 14 and Pc-12 + Ribumin led to a reduction by 26 and 21%, respectively, compared to the control treatment. Interaction between the nematophagous fungus and the rhizobacterium was positive for the nematode control, even though G. dipsosauri inhibited P. chlamydosporia growth by up to 30% in in vitro tests.

EVALUATION OF TECHNOLOGICAL INTENSITY OF EXPORTS IN THE FORESTRY SECTOR

ABSTRACT One of the fastest growing sectors in the domestic industry is the forestry, which has contributed significantly to economic development, job creation, income taxes, putting Brazil in a prominent position in the world market. This paper analyzes the evolution of the technological intensity of 12 main products exported by the sector, from 2000 to 2011. For that, utilizes an indicator called PRODY, which allows classifying different products according to their technological intensity or income content and considers the GDP per capita of exporting countries of each product, weighted by its revealed comparative advantage. It can be seen by the results, a continuous growth in all products' technology indicators and their decomposition into income effects, comparative advantage and joint effects, allowed to verify the main causes of this growth. Products with lower PRODY values are those that presented a higher evolution during the period studied. Products of higher processing, and those from pulp and paper industry, had greater technological advances, thanks to a joint effect, while the ones of lower processing, had a technological improvement due to the increase in GDP per capita in exporting countries. Sawn wood was the standout product, being the only one who proved to be dependent of comparative advantage effect, confirming that this industry has been reinventing itself and incorporating, in fact, more technology. This study revealed the importance of technological intensification to generate comparative advantage and be able to stand against international competition.

Quality Indicators of Cervical Cytopathology Tests in the Public Service in Minas Gerais, Brazil

Objective The objective of this study is to assess the performance of cytopathology laboratories providing services to the Brazilian Unified Health System (Sistema Único de Saúde - SUS) in the State of Minas Gerais, Brazil. Methods This descriptive study uses data obtained from the Cervical Cancer Information System from January to December 2012. Three quality indicators were analyzed to assess the quality of cervical cytopathology tests: positivity index, percentage of atypical squamous cells (ASCs) in abnormal tests, and percentage of tests compatiblewith high-grade squamous intraepithelial lesions (HSILs). Laboratories were classified according to their production scale in tests per year≤5,000; from 5,001 to 10,000; from 10,001 to 15,000; and 15,001. Based on the collection of variables and the classification of laboratories according to production scale, we created and analyzed a database using Microsoft Office Excel 97-2003. Results In the Brazilian state of Minas Gerais, 146 laboratories provided services to the SUS in 2012 by performing a total of 1,277,018 cervical cytopathology tests. Half of these laboratories had production scales≤5,000 tests/year and accounted for 13.1% of all tests performed in the entire state; in turn, 13.7% of these laboratories presented production scales of > 15,001 tests/year and accounted for 49.2% of the total of tests performed in the entire state. The positivity indexes of most laboratories providing services to the SUS in 2012, regardless of production scale, were below or well below recommended limits. Of the 20 laboratories that performed more than 15,001 tests per year, only three presented percentages of tests compatible with HSILs above the lower limit recommended by the Brazilian Ministry of Health. Conclusion The majority of laboratories providing services to the SUS in Minas Gerais presented quality indicators outside the range recommended by the Brazilian Ministry of Health.

Influence of Cutting Conditions on Tool Life, Tool Wear and Surface Finish in the Face Milling Process

The main goal of this work is to study the influence of cutting conditions - cutting speed, feed velocity and feed per tooth - on tool life and surface finish of the workpiece in the face milling of flat surfaces. Aiming to achieve this goal, several milling experiments were carried out with different cutting speeds, feed velocities and feeds per tooth. In the first phase of the experiments, cutting speed was varied without varying feed velocity, which caused a variation in feed per tooth. In the second phase of the experiments, cutting speed and feed velocity were varied in such a way that feed per tooth was kept constant. Tool flank wear and surface roughness of the workpiece were measured as cutting time elapsed. The main conclusions of this work are that a) cutting speed has a strong influence on tool life, regardless of whether feed velocity or feed per tooth varies and b) an increase in surface roughness of the workpiece is not closely related to an increase in wear of the primary cutting edge.

Relationship between pulmonary function and indoor air pollution from coal combustion among adult residents in an inner-city area of southwest China

Few studies evaluate the amount of particulate matter less than 2.5 mm in diameter (PM2.5) in relation to a change in lung function among adults in a population. The aim of this study was to assess the association of coal as a domestic energy source to pulmonary function in an adult population in inner-city areas of Zunyi city in China where coal use is common. In a cross-sectional study of 104 households, pulmonary function measurements were assessed and compared in 110 coal users and 121 non-coal users (≥18 years old) who were all nonsmokers. Several sociodemographic factors were assessed by questionnaire, and ventilatory function measurements including forced vital capacity (FVC), forced expiratory volume in 1 s (FEV1), the FEV1/FVC ratio, and peak expiratory flow rate (PEFR) were compared between the 2 groups. The amount of PM2.5 was also measured in all residences. There was a significant increase in the relative concentration of PM2.5 in the indoor kitchens and living rooms of the coal-exposed group compared to the non-coal-exposed group. In multivariate analysis, current exposure to coal smoke was associated with a 31.7% decrease in FVC, a 42.0% decrease in FEV1, a 7.46% decrease in the FEV1/FVC ratio, and a 23.1% decrease in PEFR in adult residents. The slope of lung function decrease for Chinese adults is approximately a 2-L decrease in FVC, a 3-L decrease in FEV1, and an 8 L/s decrease in PEFR per count per minute of PM2.5 exposure. These results demonstrate the harmful effects of indoor air pollution from coal smoke on the lung function of adult residents and emphasize the need for public health efforts to decrease exposure to coal smoke.