Preparação de nanocompósitos através do encapsulamento de polímeros condutores em 2H-MoS2 e 1T-TiS2

Nanocomposites obtained by the encapsulation of conducting polymers such as polyaniline and polydiphenylamine in 2H-MoS2 and 1T-TiS2 are synthesized and characterized by X-ray diffraction and infrared spectrophotometry. The synthesis consists in intercalating the layered compound with n-butyllithium and subsequent exfoliation in water and organic solvents. The nanocomposites are obtained by the adsorption of the polymers into the single-layers sulfides and posterior restacking. The X-ray diffraction measurements showed that the organic conducting polymers are encapsulated in mono and bilayers arrangement in a well-ordered fashion to produce single phase compounds.

Transdutores potenciométricos a base de polímeros condutores: aplicações analíticas

A review is given about the most relevant advances on the analytical applications of conducting polymers in potentiometric sensors. These organic polymers represent a new class of materials with conducting properties due to its doping by ions. Several polymers already were synthesized such as polypyrrole, polyaniline, polythiophene, among others. Particular attention is devoted to the main advantages supplied by ion selective electrodes and gas sensors using conducting polymers, as well as the incorporation of bioactive elements in these polymers for the construction of biosensors. The correlation between structure, stability and ability to ion exchange of some conducting polymers applied as potentiometric transducers, is discussed.

Construção de uma célula espectroeletroquímica termostatizada e sua aplicação para estudar polímeros eletrocrômicos

The construction of a temperature controllable spectroelectrochemical cell is described. Its use in the analysis of the thermodynamic and structural parameters of the electrochromic process of poly(3-methyl thiophene) in the temperature range between -40ºC and 60ºC is given as an example of application.

Sistema com atmosfera controlada para a caracterização de sensores a gases

This paper describes a sample holder for the electrical measurement of oxides or conducting polymers in the form of pellets or films which are used as gas sensors. The system makes it possible to control the sample temperature, the gas pressure and composition. The temperature in the sample can be changed from 25ºC to 450ºC, and the gas pressure in the chamber is controlled between 5 ¥ 10-4 and 1000 mbar. The performance of the system in resistance measurements of doped tin oxide pellets and polyaniline films deposited on platinum electrodes for methane is analyzed.

Transporte de massa em polímeros intrinsecamente condutores: importância, técnicas e modelos teóricos

In this work we discuss the aspects related to the phenomenon of mass transport in thin electroactive polymer films. Such phenomenon must be considered because the properties and consequent applications of these materials largely depend on the movement of charge carriers, i.e. ions, electrons or holes. The most recent majority of the techniques, methods and theoretical models used in this type of study are gathered and discussed, providing an easy and critical way for choosing the methodology for an investigation.

Influência da acidez do meio sobre a síntese e o comportamento redox do polipirrol

The influence of acidity on the synthesis and redox behavior of polypyrrole films was studied using galvanostatic and potentiodynamic techniques employing aqueous solutions formed by H2SO4/Na2SO4 , HCl/NaCl and HCl/CsCl. The chemical structure of the films were investigated using the FTIR technique. The polymer behavior as a function of the pH used in the cyclic voltammetric measurements is explained in terms of the mechanism responsible for the charge compensation formed during the polymer chain oxidation. From the FTIR measurements, it is seen that the water nucleophilic attack during the synthesis, does not occur under the experimental conditions employed in this work.

Filmes poliméricos ultrafinos produzidos pela técnica de automontagem: preparação, propriedades e aplicações

The self-assembly technique is a powerful tool to fabricate ultrathin films from organic compounds aiming at technological applications in molecular electronics. This relatively new approach allows molecularly flat films to be obtained on a simple and cheap fashion from various types of material, including polyelectrolytes, conducting polymers, dyes and proteins. The resulting multilayer films may be fabricated according to specific requirements since their structural and physical properties may be controlled at the molecular level. In this review we shall comment upon the evolution of preparation methods for ultrathin films, the process of adsorption and their main properties, as well as some examples of technological applications of layer-by-layer or self-assembled films.

Materiais para cátodos de baterias secundárias de lítio

In this work, cathodes employed in secondary lithium batteries are reviewed. These cathodes have great technologic and scientific importance, specifically, materials for cathodes as electronic conductor polymers (ECP), transition metal oxides (TMO) and nanocomposites of ECP/TMO. The use of a specific cathodic material is based in some intrinsic characteristics that improve the performance of the battery. Thus, some vantages and disvantages of these insertion compounds are discussed, as lithium insertion capacity, energy density, and the ciclability of these materials.

Tendências em modificação de eletrodos amperométricos para aplicações eletroanalíticas

The most relevant advances on the analytical applications of chemically modified electrodes (CME) are presented. CME have received great attention due to the possibility of electrode surface modification including chemisorption, composite generation and polymer coating. In recent years, the interest in CME has increased overall to improve the sensitivity and selectivity of the electroanalytical probes, considering the electron mediator incorporation and the new conducting polymers development. The general procedures employed for the electrode modification and the operational characteristics of some electrochemical sensors are discussed.

Elucidando os estados de oxidação do nitrogênio através da espectroscopia de absorção de raios-X na borda K do nitrogênio

The potentialities of X-ray Absorption Near Edge Spectroscopy (XANES) of the N K edge (N K) obtained with the spherical grating monochromator beam line at the Brazilian National Synchrotron Light Laboratory are explored in the investigation of poly(aniline), nanocomposites and dyes. Through the analysis of N K XANES spectra of conducting polymers and many other dye compounds that are dominated by 1s®p* transitions, it was possible to correlate the band energy value with the nitrogen oxidation states. An extensive N K XANES spectral database was obtained, thus permitting the elucidation of the nature of different nitrogens present in the intercalated conducting polymers.

Poly(o-methoxyaniline) modified electrode for detection of lithium ions

This paper reports the use of an electrode modified with poly(o-methoxyaniline) for detecting lithium ions. These ions are present in drugs used for treating bipolar disorder and that requires periodical monitoring of the concentration of lithium in blood serum. Poly(o-methoxyaniline) was obtained electrochemically by cyclic voltammetry on the surface of a gold electrode. The results showed that the electrode modified with a conducting polymer responded to lithium ions in the concentration range of 1 x 10-5 to 1 x 10-4 mol L-1 . The results also confirmed that the performance of the modified electrode was comparable to that of the standard method (atomic emission spectrophotometry).

STAPHYLOCOCCUS AUREUS BIOFILM FORMATION ON POLYPYRROLE: AN ELECTRICAL OVERVIEW

The development of organic devices based on conducting polymers for biofilm detection requires the combination of superior electrical response and high surface area for biofilm incorporation. Polypyrrole is a potential candidate for application in biofilm detection and control due to its characteristic superior electrical response and strong interaction with bacteria, which enables the use of the bioelectric effect in resulting devices. In this study, chemically synthesized polypyrrole was applied as a support for biofilm growth of S. aureus. Modifications in the electrical response of the polymeric template were explored to identify general mechanisms established during the deposition of the biofilm.

Propagação vegetativa de porta-enxertos de pereira por estacas semi-lenhosas

Pesquisou-se a viabilidade técnica da propagação vegetativa dos porta-enxertos de pereira 'Taiwan Nashi-C', 'Taiwan Mamenashi' (Pyrus calleryana Dcne.) e 'Seleção IAC-1' (Pyrus spp.), por estacas semi-lenhosas. O experimento foi conduzido em telado equipado com sistema de nebulização intermitente, pertencente ao Núcleo de Pesquisa e Desenvolvimento do Jardim Botânico, do Instituto Agronômico (IAC), em Campinas, Estado de São Paulo. Adotou-se o fatorial 3 x 4 (porta-enxertos x doses de ácido indolbutírico), com cinco repetições de 20 estacas, em delineamento inteiramente casualizado. Com os resultados obtidos aos 60 dias após a estaquia, conclui-se que: a) é tecnicamente possível a propagação dos porta-enxertos 'Taiwan Nashi-C', 'Taiwan Mamenashi' e 'Seleção IAC-1' por estacas semi-lenhosas; b) dentre os porta-enxertos pesquisados, 'Taiwan Nashi-C' apresenta a maior porcentagem de enraizamento, a menor porcentagem de estacas com calo, além do maior comprimento de raízes e número de raízes por estaca; c) é necessário o uso de ácido indolbutírico para o enraizamento de estacas semi-lenhosas desses porta-enxertos, sendo que, no conjunto das variáveis analisadas, as concentrações de 4.000 mg.L-1 e de 6.000 mg.L-1 proporcionam os maiores benefícios ao enraizamento adventício; d) as concentrações de ácido indolbutírico testadas não são fitotóxicas às estacas semi-lenhosas dos genótipos pesquisados.

Processo de trabalho e grupos semi-autônomos: a evolução da experiência sueca de Kalmar aos anos 90

Este trabalho visa a apresentar o desenvolvimento recente de novas formas de organização da produção e do trabalho na Suécia, em especial no que se refere ao setor automotivo (ônibus, caminhões e automóveis). Apresentam-se em detalhes as características da mais recente planta do grupo Volvo, denominada Uddevalla, projetada segundo o conceito de dock-assembly. É introduzida também uma discussão sucinta acerca de semelhanças e diferenças entre esse caso e outros como, por exemplo, o da planta da Toyota no Japão. Por fim, procurase reforçar a importância da consideração de soluções novas - e adaptadas - ao caso brasileiro, no que diz respeito a formas de organização do trabalho que contribuam para aumento da produtividade (em um sentido amplo) dos sistemas de produção.

Prática do aleitamento materno em comunidades rurais do semi-árido baiano

Com o objetivo de conhecer p estabelecimento e duração do aleitamento materno total e exclusivo em comunidades rurais do Semi-Árido Baiano, Brasil, foram estudadas 226 crianças de O a 2 anos de idade, filhas de pequenos produtores rurais que vivem numa das regiões mais secas do nordeste brasileiro, de pobreza absoluta. Os dados referem-se a todas as crianças da família que à data do estudo tinham até 2 anos de idade. Os dados foram coletados por meio de formulários aplicados às mães ou responsáveis pelo menor, no período de 1988 a 1989. A tábua de vida foi o recurso estatístico utilizado para o cálculo da duração mediana do evento. Das 226 crianças que integraram o estudo, 91,6 iniciaram a amamentação ao peito. A duração mediana do aleitamento total foi de 90,28 dias e o aleitamento exclusivo apresentou duração mediana de 0,1 dia. Ainda que o estabelecimento da amamentação ao peito possa ser considerado alto, a duração mediana do aleitamento total foi extrememente curta, e o aleitamento exclusivo foi desprezível.