Optimization of the use of carbon paste electrodes (CPE) for electrochemical study of the chalcopyrite

The use of carbon paste electrodes (CPE) of mineral sulfides can be useful for electrochemical studies to overcome problems by using massive ones. Using CPE-chalcopyrite some variables were electrochemically evaluated. These variables were: (i) the atmosphere of preparation (air or argon) of CPE and elapsed time till its use; (ii) scan rate for voltammetric measurements and (iii) chalcopyrite concentration in the CPE. Based on cyclic voltammetry, open-circuit potential and electrochemical impedance results the recommendations are: oxygen-free atmosphere to prepare and kept the CPE until around two ours, scan rates from 10 to 40 mV s-1, and chalcopyrite concentrations > 20%.

Tribocorrosão da liga TI6AL4V em solução salina tamponada com fosfato

The tribocorrosion behavior of Ti6Al4V alloy was investigated in a Phosphate Buffered Saline (PBS) solution by a reciprocating wear, using alumina ball as the counterface material, at different normal forces and sliding velocities. Dry wear experiments were performed in order to compare with the tribocorrosion experiments at open circuit potential and under anodic polarization. Dry wear induced a superior damage on the counterface, forming larger and shallower wear tracks compared with those experiments performed in PBS solution. The anodic current was increased by wear; however the volume of oxidized metal in tribocorrosion experiments correspond to a relative low percentage of the wear track volume.

Kinetic modeling of the biosorption of Cd2+ ions from aqueous solutions onto Eichhornia crassipes roots using potentiometry: low-cost alternative to conventional methods

This work presents the use of potentiometric measurements for kinetic studies of biosorption of Cd2+ ions from aqueous solutions on Eichhornia crassipes roots. The open circuit potential of the Cd/Cd2+ electrode of the first kind was measured during the bioadsorption process. The amount of Cd2+ ions accumulated was determined in real time. The data were fit to different models, with the pseudo-second-order model proving to be the best in describing the data. The advantages and limitations of the methodology proposed relative to the traditional method are discussed.

Aplicação de técnicas eletroquímicas no estudo da dissolução oxidativa da covelita (CuS) por Thiobacillus ferrooxidans

Among the copper sulphides, chalcopyrite (CuFeS2), covellite (CuS) and chalcocite (Cu2S) are the most important source of minerals for copper mining industry. The acknowledge of behaviour of these sulphides related with bacterial leaching process are essential for optimization procedures. Despite of its importance, covellite has not deserved much interest of researchers regarding this matter. In this work it was studied the oxidation of covellite by the chemolithotrophic bacterium Thiobacillus ferrooxidans by using electrochemical techniques, such as open circuit potentials with the time and cyclic voltammetry. The experiments were carried out in acid medium (pH 1.8), containing or not Fe2+ as additional energy source, and in different periods of incubation; chemical controls were run in parallel. The results showed that a sulphur layer is formed spontaneously due the acid attack, covering the sulphide in the initial phase of incubation, blocking the sulphide oxidation. However, the bacterium was capable to oxidize this sulphur layer. In the presence of Fe2+ as supplemental energy source, the corrosion process was facilitated, because ocurred an indirect oxidation of covellite by Fe3+, which was produced by T. ferrooxidans oxidation of the Fe2+ added in the medium.

Methodology for Photovoltaic Modules Characterization and Shading Effects Analysis

This work describes the methodology, basic procedures and instrumental employed by the Solar Energy Laboratory at Universidade Federal do Rio Grande do Sul for the determination of current-voltage characteristic curves of photovoltaic modules. According to this methodology, I-V characteristic curves were acquired for several modules under diverse conditions. The main electrical parameters were determined and the temperature and irradiance influence on photovoltaic modules performance was quantified. It was observed that most of the tested modules presented output power values considerably lower than those specified by the manufacturers. The described hardware allows the testing of modules with open-circuit voltage up to 50 V and short-circuit current up to 8 A.

Seasonal dynamics of a drosophilid (Diptera) assemblage and its potencial as bioindicator in open environments

Drosophila Fallen, 1823 (Diptera, Drosophilidae) is for long a well-established model organism for genetics and evolutionary research. The ecology of these flies, however, has only recently been better studied. Recent papers show that Drosophila assemblies can be used as bioindicators of forested environment degradation. In this work the bioindicator potential of drosophilids was evaluated in a naturally opened environment, a coastal strand-forest (restinga). Data from nine consecutive seasonal collections revealed strong temporal fluctuation pattern of the majority of Drosophila species groups. Drosophila willistoni group was more abundant at autumns, whereas D. cardini and D. tripunctata groups were, respectively, expressive at winters and springs, and D. repleta group at both seasons. The exotic species D. simulans Sturtevant, 1919 (from D. melanogaster group) and Zaprionus indianus Gupta, 1970 were most abundant at summers. Overall, the assemblage structure did not show the same characteristics of forested or urban environments, but was similar to the forests at winters and to cities at summers. This raises the question that this locality may already been under urbanization impact. Also, this can be interpreted as an easily invaded site for exotic species, what might lead to biotic homogenization and therefore can put in check the usage of drosophilid assemblages as bioindicators at open environments.

Occurrence of Cabassous tatouay (Cingulata, Dasypodidae) in Rio Grande do Sul and its potential distribution in southern Brazil

ABSTRACT Cabossous tatouay Desmarest, 1804 is considered a rare species in southern South America, and Rio Grande do Sul State, Brazil, records of the species are scarce and inaccurate. This study reports 40 localities for C. tatouay, and provides a map of the species' potential distribution using ecological niche modeling (ENM). The ENM indicated that in this region C. tatouay is associated with open grasslands, including the areas of "Pampas" and the open fields in the highlands of the Atlantic Forest. This study contributes to the information about the greater naked-tailed armadillo in southern Brazil, and provides data key to its future conservation.

Ammonia losses estimated by an open collector from urea applied to sugarcane straw

The quantification of ammonia (NH3) losses from sugarcane straw fertilized with urea can be performed with collectors that recover the NH3 in acid-treated absorbers. Thus, the use of an open NH3 collector with a polytetrafluoroethylene (PTFE)-wrapped absorber is an interesting option since its cost is low, handling easy and microclimatic conditions irrelevant. The aim of this study was to evaluate the efficiency of an open collector for quantifying NH3-N volatilized from urea applied over the sugarcane straw. The experiment was carried out in a sugarcane field located near Piracicaba, São Paulo, Brazil. The NH3-N losses were estimated using a semi-open static collector calibrated with 15N (reference method) and an open collector with an absorber wrapped in PTFE film. Urea was applied to the soil surface in treatments corresponding to rates of 50, 100, 150 and 200 kg ha-1 N. Applying urea-N fertilizer on sugarcane straw resulted in losses NH3-N up to 24 % of the applied rate. The amount of volatile NH3-N measured in the open and the semi-open static collector did not differ. The effectiveness of the collection system varied non-linearly, with an average value of 58.4 % for the range of 100 to 200 kg ha-1 of urea-N. The open collector showed significant potential for use; however, further research is needed to verify the suitability of the proposed method.

The Brazilian electronic theses and dissertations digital library: providing open access for scholarly information

This paper describes a project led by the Instituto Brasileiro de Informações em Ciência e Tecnologia (Ibict), a government institution, to build a national digital library for electronic theses and dissertations - Bibliteca Digital de Teses e Dissertações (BDTD). The project has been a collaborative effort among Ibict, universities and other research centers in Brazil. The developers adopted a system architecture based on the Open Archives Initiative (OAI) in which universities and research centers act as data providers and Ibict as a service provider. A Brazilian metadata standard for electronic theses and dissertations was developed for the digital library. A toolkit including open source package was also developed by Ibict to be distributed to potential data providers. BDTD has been integrated with the international initiative: the Networked Digital Library of Thesis and Dissertation (NDLTD). Discussions in the paper address various issues related to project design, development and management as well as the role played by Ibict. Conclusions highlight some important lessons learned to date and challenges for the future in expanding the BDTD project.

Allohexaploid pearl millet x elephantgrass population potential for a recurrent selection program

The objective of this work was to evaluate the potential of allohexaploid pearl millet x elephantgrass (HGL) population for a recurrent selection program through open-pollinated progenies. Seventy-eight progenies, one representative sample of the population, and two commercial cultivars, Pioneiro and Paraíso, were evaluated in a 9x9 triple lattice design, in two sites. Plant height and dry matter yield were evaluated in three and four cuts, respectively. For plant height, the 17 best progenies were similar to both commercial controls, while for dry matter yield they were higher than 'Paraíso' and lower than 'Pioneiro'. The correlation between progenies and cuts indicated that the fourth cut represents the mean of all cuts, and the possibility of using early selection. Heritability estimates considering cuts and sites were 56.9% for plant height and 58.8% for dry matter yield, and the expected response to selection was 23.4% for dry matter yield and 18.1% for plant height. These results demonstrate the promising HGL population potential for a recurrent selection program.

LOW COST ANALYZER FOR THE DETERMINATION OF PHOSPHORUS BASED ON OPEN-SOURCE HARDWARE AND PULSED FLOWS

The need for automated analyzers for industrial and environmental samples has triggered the research for new and cost-effective strategies of automation and control of analytical systems. The widespread availability of open-source hardware together with novel analytical methods based on pulsed flows have opened the possibility of implementing standalone automated analytical systems at low cost. Among the areas that can benefit from this approach are the analysis of industrial products and effluents and environmental analysis. In this work, a multi-pumping flow system is proposed for the determination of phosphorus in effluents and polluted water samples. The system employs photometric detection based on the formation of molybdovanadophosphoric acid, and the fluidic circuit is built using three solenoid micropumps. The detection is implemented with a low cost LED-photodiode photometric detection system and the whole system is controlled by an open-source Arduino Uno microcontroller board. The optimization of the timing to ensure the color development and the pumping cycle is discussed for the proposed implementation. Experimental results to evaluate the system behavior are presented verifying a linear relationship between the relative absorbance and the phosphorus concentrations for levels as high as 50 mg L-1.

Prediction of transients and control reactions in a transonic wind tunnel

This work describes a lumped parameter mathematical model for the prediction of transients in an aerodynamic circuit of a transonic wind tunnel. Control actions to properly handle those perturbations are also assessed. The tunnel circuit technology is up to date and incorporates a novel feature: high-enthalpy air injection to extend the tunnel’s Reynolds number capability. The model solves the equations of continuity, energy and momentum and defines density, internal energy and mass flow as the basic parameters in the aerodynamic study as well as Mach number, stagnation pressure and stagnation temperature, all referred to test section conditions, as the main control variables. The tunnel circuit response to control actions and the stability of the flow are numerically investigated. Initially, for validation purposes, the code was applied to the AWT ("Altitude Wind Tunnel" of NASA-Lewis). In the sequel, the Brazilian transonic wind tunnel was investigated, with all the main control systems modeled, including injection.

Analysis of open CNC architecture for machine tools

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.

The survival and establishment potential of spores of Cyathea delgadii Sternb. in soils from Itirapina and Moji Guaçu (SP), Brazil

Germination of spores of Cyathea delgadii was carried out in soils collected in March 1997 (rainy season) at three depths (0-5, 5-10 and 10-15 cm) from the cerrado, open-cerrado, gallery forest and marsh at Moji Guaçu and cerradão, cerrado and gallery forest at Pedregulho, in Itirapina, both in the state of São Paulo, Brazil. Viability of spores mixed with soil and buried in the cerrado at the Reserva in Moji Guaçu were conducted for up to 10 months. The spores germinated in all soils. Germination in the soils was significantly lower than in distilled water. Germination was higher in soils from the gallery forest and cerrado than from open cerrado, cerradão and marsh. The germination was the same in the soil samples from the three depths of gallery forest, cerrado and cerradão. Spores of C. delgadii maintained viability longer when buried in cerrado soil than when dry stored at 4°C. After 10 months germination was 50.5% in buried spores against 3.8% in spores of the same age and harvest, stored at 4°C.

Changes in the electrophysiological parameters of the posterior intestine of Anguilla anguilla (Pisces) induced by oxytocin, urotensin II and aldosterone

In view of the importance of the intestine in the osmoregulation of freshwater fishes, we determined the effects of oxytocin, urotensin II (UII), and aldosterone added to the serosal side of the isolated posterior intestine of the freshwater-adapted teleost Anguilla anguilla on electrophysiological parameters. Oxytocin decreased the short-circuit current (SCC) and transepithelial potential difference (TPD) at concentrations of 1 and 10 mU/ml (to 50% and 42% of control values, respectively), but did not alter these parameters at a concentration of 0.1 mU/ml. UII reduced SCC and TPD at concentrations of 10 nM, 50 nM and 100 nM (to 85% of control values), but increased these parameters at the concentration of 500 nM (to 115% of control values). Aldosterone did not alter SCC or TPD at the concentrations tested (10 nM and 100 nM). Oxytocin may open Na+ channels in the apical membrane, allowing the flow of Na+ to the serosa, reducing SCC and TPD. Should this hypothesis be correct, oxytocin would be important for freshwater adaptation, since it would increase Na+ absorption. The reduction of SCC and TPD in the posterior intestine of A. anguilla induced by UII is evidence that this neurohormone is also important for freshwater adaptation in teleosts. Aldosterone did not show this effect probably due to the lack of receptors in this organ