Numerical study of wedge supported oblique shock wave-oblique detonation wave transitions

The results of a numerical study of premixed Hydrogen-air flows ignition by an oblique shock wave (OSW) stabilized by a wedge are presented, in situations when initial and boundary conditions are such that transition between the initial OSW and an oblique detonation wave (ODW) is observed. More precisely, the objectives of the paper are: (i) to identify the different possible structures of the transition region that exist between the initial OSW and the resulting ODW and (ii) to evidence the effect on the ODW of an abrupt decrease of the wedge angle in such a way that the final part of the wedge surface becomes parallel to the initial flow. For such a geometrical configuration and for the initial and boundary conditions considered, the overdriven detonation supported by the initial wedge angle is found to relax towards a Chapman-Jouguet detonation in the region where the wedge surface is parallel to the initial flow. Computations are performed using an adaptive, unstructured grid, finite volume computer code previously developed for the sake of the computations of high speed, compressible flows of reactive gas mixtures. Physico-chemical properties are functions of the local mixture composition, temperature and pressure, and they are computed using the CHEMKIN-II subroutines.

Factorial validity of the Maslach Burnout Inventory (MBI-HSS) among Spanish professionals

OBJECTIVE: To assess the factorial validity and internal consistency of the Maslach Burnout Inventory (MBI-HSS). METHODS: In a sample consisting of 705 Spanish professionals from diverse occupational sectors (health, education, police and so one), seven plausible factorial models hypothesized were compared using LISREL 8. RESULTS: The four-factor oblique solution and the three-factor oblique solution showed the best and similar fit. Deletion of Item 12 and Item 16, taking into consideration the suggestions in the manual, improved the goodness of fit for both models. The four-factor oblique model suggests that, in addition to Emotional Exhaustion (EE) and Depersonalization (DP), Personal Accomplishment (PA) consists of two components labeled here Self-Competence (Items 4, 7, 17, and 21) and the Existential Component (Items 9, 12, 18, and 19). However, the alpha coefficient was relatively low for the Self-Competence component, suggesting that it is more suitable to estimate the syndrome as a threedimensional construct. The Cronbach's alpha was satisfactory for PA (alpha =.71) and EE (alpha =.85), and moderate for DP (alpha =.58). CONCLUSIONS: The results show that the MBI-HSS offers factorial validity and its scales present internal consistency to evaluate the quality of working life for Spanish professionals.

Anfíbios Anuros da coleção Adolpho Lutz: III - Hyla claresignata Lutz & B. Lutz, 1939

Hyla claresignata Lutz & Lutz, 1939, is a large species apparently not closely allied to the other known Brazilian hylas. It is characterized by the very small tympanum; the head is short and the snout rounded; the legs are long, the hands and feet unusually large, the latter extensively webbbed. The specific name is derived from the insular, irregular, or roughly triangular, dark spots, with a light halo, found mostly in the dorso-lateral region and on the legs. It belongs to the rain-forest fauna of the Marítime Range. The adult is a bromeliad-dweller and the tadpole rhyacophilous. DESCRIPTION. Vomerine teeth in two separate, oblique, groups, behind the large choanae, parallel to the posterior half of their inner border. Tongue entire, short, very broad and hardly free behind. Snout short, rounded, with distinct canthus rostralis and gradually sloping loreal region. Eye very large and prominent, its horizontal diameter almost equal to the distance between its anterior corner and the tip of the snout. Tympanum very small, less than one third of the diameter of the eye, but distinct, partly covered by a short, heavy ridge. Lateral fingers less than one third webbed; fourth finger slightly longer than the second, just reaching the base of the disk of the third; subarticular tubercles well developed; an angular pollex rudiment, more noticeable in the males. Toes almost completely webbed, the edge of the web inserted at the base of the disk on the third and the fifth; an inner metatarsal tubercle. Skin smooth above, granular beneath, on the throat minutely so. No dermal appendage on the hell. Habit robust, head broader than long, body rather heavy, slightly narrowed in the postaxillary region. Legs long, the tibiotarsal articulation reaching beyond the tip of the snout when adpressed. Type (female): 61 mm. (Fig. 1.) DIAGNOSIS of TADPOLE (by G. Orton). "A large specialized, mountain-stream tadpole, with wide head an elongated, flattened snout, greatly enlarged lips and high tooth formula. Eyes dorsal. Spiracle sinistral, projecting, situated far back on side. Anus dextral. Tooth formula 8/12 to 9/14 in fully grown larvae. Tail with a prominent, vertical dark band across musculature and fins; a second concentration of dark pigment near tip of tail, may or may not form a similar but narrower band. Maximum known total length: 60mm.; head and body length 25mm. (Figs. 6 e 7). For further details see Lutz & Lutz, 1939 and Lutz B. & Orton G. 1946.

Observation on the morphology of Australorbis glabratus

The present morphological study of A. glabratus was based on the observation of shell, radula, renal region and genitalia of 50 specimens having a shell diameter of 18 mm. In this summary we record the data pertaining to the chracteristics that can be used in systematics. The numerals refere to the mean and their standard deviation; no special reference being made, they correspond to length measurements. Shell: 18 mm in diameter, 5.59 ± 0.24 mm in greatest width, 5 to 6 whorls. Right side umbilicated, left one weakly depressed. Last whorl about thrice as tall as the penultimate one at the aperture, the measurements being taken on the right side. Aperture perpendicular or a little oblique. Body, extended: 47.06 ± 3.31 mm. Renal tube: Narrow and elongated, 23.84 ± 1.90 mm, showing a pigmented ridge along its ventral surface. Ovotestis: 12.78 ± 1.50 mm. Mainly trifurcate diverticula attaching in fan-like manner to the collecting canal (this arrangement is seen to best advantage in the cephalic middle of the ovotestis). The collecting canal greatly swells at the cephalic end, narrowing suddenly as it leaves the ovotestis. Ovisperm duct: 13.70 ± 1.68 mm, including the non-unwound seminal vesicle. The latter, situated about 1 mm from the beginning af the ovisperm duct, was 1.14 ± 0.29 mm in greatest diameter, and is beset by numerous short diverticula. Sperm duct: 14.16 ± 1.27 mm, pursuing a sinous course along the oviduct. Prostate: Prostate duct 5.53 ± 0.74 mm, collecting a row of long diverticula, the latter 21.6 ± 3.5 in number. Last diverticulum generally simple or bifurcate, penultimate generally arborescent, bifurcate or simple, antepenultimate nearly always arborescent, the remaining ones arborescent. The arborescent diverticula frequently give off secondary branches. Vas deferens: 17.50 ± 2.05 mm. The ratio vas deferens/vergic sac was 4.7 ± 0.6. Verge: 3.70 ± 0.54 mm long, 0.12 ± 0.03 mm wide. Free end tapering to a point where the sperm canal opens. No penial stylet. Vergic sac: 3.77 ± 0.50 mm long, 0.19 ± 0.01 mm wide. The length ratio vergic sac/preputium was 1 ± 0.02. Preputium: Deeply pigmented, 3.79 ± 0.40 mm long, 0.89 ± 0.12 mm wide in the middle. Muscular diaphragm between it and the vergic sac. Two muscular pilasters along its lateral walls. Oviduct: 10.24 ± 1.29 mm, suddenly swollen at the cephalic end so that it forms a folded pouch capping the beginning of the uterus. Uterus: 10.58 ± 1.18 mm. Vagina: 2.06 ± 0.15 mm long, 0.32 ± 0.05 mm wide, showing a swelling at its caudal portion, just above the opening of the spermathecal duct. Spermatheca: 1.57 ± 0.41 mm long, 0.92 ± 0.23 mm wide. Spermathecal duct 1.15 ± 0.23 mm. Radula: 125 to 163 rows of teeth (mean 141.4 ± 9.8). Radula formula 27-1-27 to 34-1-34 (mean 30.9 ± 1.7).

Endobronchial valves in severe emphysematous patients: CT evaluation of lung fissures completeness, treatment radiological response and quantitative emphysema analysis

OBJECTIVE: To evaluate lung fissures completeness, post-treatment radiological response and quantitative CT analysis (QCTA) in a population of severe emphysematous patients submitted to endobronchial valves (EBV) implantation. MATERIALS AND METHODS: Multi-detectors CT exams of 29 patients were studied, using thin-section low dose protocol without contrast. Two radiologists retrospectively reviewed all images in consensus; fissures completeness was estimated in 5% increments and post-EBV radiological response (target lobe atelectasis/volume loss) was evaluated. QCTA was performed in pre and post-treatment scans using a fully automated software. RESULTS: CT response was present in 16/29 patients. In the negative CT response group, all 13 patients presented incomplete fissures, and mean oblique fissures completeness was 72.8%, against 88.3% in the other group. QCTA most significant results showed a reduced post-treatment total lung volume (LV) (mean 542 ml), reduced EBV-submitted LV (700 ml) and reduced emphysema volume (331.4 ml) in the positive response group, which also showed improved functional tests. CONCLUSION: EBV benefit is most likely in patients who have complete interlobar fissures and develop lobar atelectasis. In patients with no radiological response we observed a higher prevalence of incomplete fissures and a greater degree of incompleteness. The fully automated QCTA detected the post-treatment alterations, especially in the treated lung analysis.

Calibração multivariada para sistemas com bandas sobrepostas através da análise da fatores do tipo Q

A multivariate calibration method to determine chemical compositions of systems with severely overlapped bands is proposed. Q mode factors are determined from the spectral data and subsequently rotated using the varimax and oblique transformation of Imbrie. The method is applied to two sets of simulated data to test the sensitivity of analytical results to random experimental error. The chemical concentrations of alanine and threonine mixture are determined from spectral data of the 302,5 - 548,5 nm region.

Aplicação de métodos quimiométricos na especiação de Cr(VI) em solução aquosa

The equilibria, the spectra and the identities of the species of Cr(VI) that are present in aqueous solution have long been an active subject of discussion in the literature. In this paper, three different chemometric methodologies are applied to sets of UV/Visible spectra of aqueous Cr(VI) solutions, in order to solve a chemical system where there is no available information concerning the composition of the samples nor spectral information about the pure species. Imbrie Q-mode factor analysis, followed by varimax rotation and Imbrie oblique projection, were used to estimate the composition of Cr(VI) equilibrium solutions and, by combining these results with the k-matrix method, to obtain the pure spectra of the species. Evolving factor analysis and self modeling curve resolution were used to confirm the number of the species and the resolution of the system, respectively. Sets of 3.3×10-4 and 3.3×10-5 mol L-1 Cr(VI) solutions, respectively, were analyzed in the pH range from 1 to 12. Two factors were identified, which were related to the chromate ion (CrO4(2-)) and bichromate ion (HCrO4-). The pK of the equilibrium was estimated as 5.8.

Autoagregação da 5,10,15,20-tetrakis(4-metoxifenil)porfirina (tmpp): estudos espectroscópicos e análises multivariadas

In this work, the spectroscopic properties of 5,10,15,20-tetrakis(4-methoxyphenyl)porphyrin (TMPP) in solvents of different polarities and water/ethanol mixtures were studied by electronic absorption spectroscopy and resonance light scattering associated with statistical analysis. The molar absorption coefficient and emission maximum of TMPP were dependent on solvent polarity. In the water/ethanol mixture, TMPP remained monomeric up to 25% of water, when it reaches its critical aggregation percentage. Oblique head-to-tail aggregate was found at intermediate water content (35 - 55%), while formation of a J-type aggregate was observed at higher water content (> 60%).

Ontogenesis of stomata in Velloziaceae: paracytic versus tetracytic?

In Velloziaceae, the number of subsidiary cells has been used to characterize species and support groups. Nevertheless, the homology of the stomatal types have not been scrutinized. Stomatal ontogenesis of Vellozia epidendroides and V. plicata, assigned to have tetracytic stomata, and of V. glauca and Barbacenia riparia, assigned to have paracytic stomata, were investigated. In the four species studied, stomata followed perigenic development. Subsidiary cells arise from oblique divisions of neighbouring cells of the guard mother cell (GMC). These cells are elongated and parallel to the longer axis of the stoma. Polar cells show wide variation, following the shape and size of the epidermal cells in the vicinity. Hence, these cells cannot be called subsidiary cells. This wide variation is due to a much higher density of stomata in some regions of the leaf blade. This distribution of stomata forces the development of short polar cells, leading to an apparently tetracytic stomata. In regions of low concentration of stomata, higher spatial availability between the GMCs allows the elongation of polar cells, leading to evident paracytic stomata. Therefore, the four studied species are considered braquiparacytic, questioning the classification of stomata into tetracytic and paracytic in Velloziaceae.

Measuring higher order optical aberrations of the human eye: techniques and applications

In the present paper we discuss the development of "wave-front", an instrument for determining the lower and higher optical aberrations of the human eye. We also discuss the advantages that such instrumentation and techniques might bring to the ophthalmology professional of the 21st century. By shining a small light spot on the retina of subjects and observing the light that is reflected back from within the eye, we are able to quantitatively determine the amount of lower order aberrations (astigmatism, myopia, hyperopia) and higher order aberrations (coma, spherical aberration, etc.). We have measured artificial eyes with calibrated ametropia ranging from +5 to -5 D, with and without 2 D astigmatism with axis at 45º and 90º. We used a device known as the Hartmann-Shack (HS) sensor, originally developed for measuring the optical aberrations of optical instruments and general refracting surfaces in astronomical telescopes. The HS sensor sends information to a computer software for decomposition of wave-front aberrations into a set of Zernike polynomials. These polynomials have special mathematical properties and are more suitable in this case than the traditional Seidel polynomials. We have demonstrated that this technique is more precise than conventional autorefraction, with a root mean square error (RMSE) of less than 0.1 µm for a 4-mm diameter pupil. In terms of dioptric power this represents an RMSE error of less than 0.04 D and 5º for the axis. This precision is sufficient for customized corneal ablations, among other applications.

Functional changes of human quadriceps muscle injured by eccentric exercise

The present study evaluated functional changes of quadriceps muscle after injury induced by eccentric exercise. Maximal isometric torque of quadriceps and the surface electromyography (root mean square, RMS, and median frequency, MDF) of the vastus medialis oblique (VMO) and vastus lateralis (VL) muscles were examined before, immediately after and during the first 7 days after injury. Serum creatine kinase (CK) levels and magnetic resonance imaging (MRI) were used to identify muscle injury. The subject was used as her own control and percent refers to pre-injury data. Experiments were carried out with a sedentary 23-year-old female. Injury was induced by 4 bouts of 15 maximal isokinetic eccentric contractions (angular velocity of 5º/s; range of motion from 40º to 110º of knee flexion). The isometric torque of the quadriceps (knee at 90º flexion) decreased 52% immediately after eccentric exercise and recovered on the 5th day. The highest reduction of RMS occurred on the 2nd day after injury in both VL (63%) and VMO (66%) and only VL recovered to the pre-injury level on the 7th day. Immediately after injury, the MDF decreased by 5 and 3% (VMO and VL, respectively) and recovered one day later. Serum CK levels increased by 109% on the 2nd day and were still increased by 32% on the 7th day. MRI showed large areas of injury especially in the deep region of quadriceps. In conclusion, eccentric exercise decreased the isometric torque and electromyographic signals of quadriceps muscle, which were recovered in one week, despite the muscle regeneration signals.