Performance, carcass traits and costs of Suffolk lambs finishing systems with early weaning and controlled suckling

The performance, carcass traits and finishing costs of Suffolk lambs were evaluated in three systems: (1) lambs weaned with 22 kg of body weight (BW) and supplemented with concentrate on pasture until slaughter; (2) lambs weaned with 22 kg BW and fed in feedlot until slaughter; (3) lambs maintained in controlled nursing after 22 kg BW and creep fed in feedlot until slaughter. Average daily gain (ADG) was 224 g/d for lambs weaned and supplemented with concentrate on pasture, 386 g/d for lambs weaned in feedlot and 481 g/d for lambs under controlled nursing. Empty body weight and visceral fat deposition were highest in lambs from feedlot systems. Carcass weights and carcass yields were highest for lambs in controlled nursing. Finishing total costs were highest in controlled nursing and lowest in the system with weaning in feedlot. High concentrate diet associated with controlled nursing in feedlot allowed lambs to reach the growth potential and carcasses with higher weights, higher yields and higher fat content. After weaning, lambs in feedlot fed with high concentrate diet had higher weight gain than lambs supplemented with concentrate on pasture. Carcasses produced under these two systems presented the same characteristics. The system with weaning in feedlot showed the lowest cost per kg carcass.

Anaerobic biodigestion of pigs feces in the initial, growing and finishing stages fed with diets formulated with corn or sorghum

The objective of this study was to evaluate the quality and the production of biogas and biofertilizer obtained from biodigester supplied with pig feces in the initial, growing and finishing stages, fed with diets formulated based on corn or sorghum. Twenty bench biodigesters were used with hydraulic retention time of 30 days and daily loads that contained 4 to 6% of total solids (TS) and 3.6 to 5.2% of volatile solids (VS). In the effluent of the biodigesters, mean levels of TS were observed ranging between 1.6 and 2.0% and of VS between 1.2 and 1.6%. The mean reductions of TS were 57.7 to 64.7% and of VS from 61.7 to 69.0%, and there was only difference in the finishing phase, in which the major averages reductions were produced by the biodigesters supplied with feces from animals fed with diets based on corn. In biodigesters supplied with feces from animals in the initial and growing stages fed with diets based on corn, were observed higher average productions of biogas and the greatest average potentials of biogas production. The average potentials obtained were 0.033; 0.181; 0.685; 0.788 and 1.132 m³ per kg of affluent, manure, TS added, VS added and VS reduced, respectively. No differences were found on the average content of methane in the biogas between diets and stages. The average concentrations of nutrients N, P, K, Ca, Mg, Na, Fe, Mn, Zn and Cu in the biodigester affluent and effluent, ranged between diets and stages.

Use of interactive performance optimization for identifying the ideal profile of swine finishing producers

The present research aimed to develop a modeling capable of identifying the ideal profile of swine finishing producers using the interactive performance optimization, which began by verifying qualitative the criteria considered most relevant to the decision-making, generating a closed structured diagnosis that covers the socioeconomic aspects about the activity, until the design of a mathematical model able to translate the data obtained in quantitative information. For the verification, it was proposed a practical study for a universe of 120 members of a cooperative in the state of Rio Grande do Sul, Brazil. The results showed that, from the application and the definition of the ideal profile, it was possible to verify that 82 producers are in the group of those who have obtained a "Good" performance, and to 44 the result is in the range between 86% to 90% from the ideal, which means that most have short or medium-term conditions to evolve their status for the considered "Very Good", where only 12.5% of the producers are currently.

Influence of tail biting on weight gain, lesions and condemnations at slaughter of finishing pigs

The present study assessed the association of tail-biting lesions in finishing pigs with weight gain, occurrence of locomotion or respiratory disorders and abscesses during finishing period, and carcass condemnation at slaughter. The study was carried out on 4 different farms. For each animal with a tail biting lesion, two control pigs were selected. The total number of animals in the study was 312, with 104 of them being tail-bitten. Tail lesions were classified according to the degree of severity into four scores: score 0 -normal tail withou lesion; score 1-3 - increasing lesion severity, and score 4 - healed lesions. Overall, the occurrence of severe tail lesions (score 3) varied from 55 to 73% of tail-bitten pigs among farms. On all farms, healing of tail lesions was observed in 95% to 100% of the animals at the evaluation performed within 41-43 days after the commencement of the study. In two out of the four evaluated farms, pigs with score of 3 showed lower weight gain (P<0.05) compared with score 0 pigs. Before slaughter, the occurrence of locomotion problems and nodules/abscesses was associated (P<0.05) with the presence of tail-biting lesions. At slaughter, tail-biting lesions were associated (P<0.05) with the presence of abscesses, lung lesions (pleuritis and embolic pneumonia) or arthritis in carcasses. Carcass condemnation was associated with the presence of tail-biting lesions (P<0.05). Overall, carcass condemnation rate was 21.4%, of which animals with tail-biting lesions accounted for 66.7% of condemnations. Among the animals diagnosed with cannibalism at farm level, only two had not healed their lesions at slaughter. The fact that there were a lot of carcass condemnations, despite the fact that tail-bitten animals had no more active lesions, suggests that different situations may be observed between the field and slaughter, reinforcing the need to analyze pigs both at farm and slaughter to allow proper assessment of losses related to tail biting. Collectively, the observations of the present study show that complications associated with tail-biting found in slaughterhouses are probably underestimating field prevalence.

Critical aspects on the behavior of material from the mechanical tool-workpiece interaction in single point diamond turning

Some material aspects such as grain size, purity and anisotropy exert an important influence on surface quality, especially in single point diamond turning. The aim of this paper is to present and discuss some critical factors that can limit the accuracy of ultraprecision machining of non-ferrous metals and to identify the effects of them on the cutting mechanism with single point diamond tools. This will be carried out through observations of machined surfaces and chips produced using optical and scanning electron microscopy. Solutions to reduce the influence of some of these limiting factors related with the mechanism of generation of mirror-like surfaces will be discussed.

Investigation on diamond turning of silicon crystal - generation mechanism of surface cut with worn tool

This paper discusses the effect of tool wear on surface finish in single-point diamond turning of single crystal silicon. The morphology and topography of the machined surface clearly show the type of cutting edge wear reproduced onto the cutting grooves. Scanning electron microscopy is used in order to correlate the cutting edge damage and microtopography features observed through atomic force microscopy. The possible wear mechanisms affecting tool performance and surface generation during cutting are also discussed. The zero degree rake angle single point diamond tool presented small nicks on the cutting edge. The negative rake angle tools presented more a type of crater wear on the rake face. No wear was detected on flank face of the diamond tools.

Effect of genotype, finishing system, and sex on physiochemical characteristics of goat meat

Seventy-eight kids of both sexes and five genotypes were used: Alpine, ½ Boer + ½ Alpine (½ BA), ¾ Boer + ¼ Alpine, ½ Anglo-nubian + ½ Alpine and "tricross" (½ Anglo-nubian + ¼ Boer + ¼ Alpine) with initial average weight of 14.1 ± 2.5. The objective was to evaluate the effect of genotype, finishing system, and sex on the physiochemical characteristics of goat meat. Finishing systems were: ST1 - kid + dam in pasture and ST2 - weaned kid and feedlot. Kids in ST1 were kept in an area with Panicum maximum cv. Tanzania, and after grazing, water and mineral salt/mix were fed ad libitum to the animals. The animals in ST2 were confined in collective pens distributed according to genotypes and received diet with 16% CP and 73% TDN. The values of pH, a* (red content), Cooking Loss (CL), and Ether Extract (EE) percentage were influenced by genotype. Values for red content (a*) and L* (brightness), CL and percentages of moisture, protein, EE, and ash were influenced by the finishing system. Longissimus dorsi muscle from animals ½ BA exhibited better physiochemical characteristics. For greater tenderness and higher percentages of fat, consumers should choose female kid goat meat.

Brazil and the institutionalization of South America: from hemispheric estrangement to cooperative hegemony

This article argues that Brazil went from a posture of estrangement in relation to the hemispheric project represented by the Free Trade Area of the Americas (FTAA) to a strategy of cooperative hegemony aimed at institutionalizing the South American space and increasing the costs of the FTAA for the United States. Although Brazil was initially isolated, US lack of leadership combined with events at the subregional level ended up turning the tide in the direction of Brazilian interests. These factors help to understand the current institutional configuration of South America.

The role of discriminant analysis in the refinement of customer satisfaction assessment

OBJECTIVE: To test discriminant analysis as a method of turning the information of a routine customer satisfaction survey (CSS) into a more accurate decision-making tool. METHODS: A 7-question, 10-multiple choice, self-applied questionnaire was used to study a sample of patients seen in two outpatient care units in Valparaíso, Chile, one of primary care (n=100) and the other of secondary care (n=249). Two cutting points were considered in the dependent variable (final satisfaction score): satisfied versus unsatisfied, and very satisfied versus all others. Results were compared with empirical measures (proportion of satisfied individuals, proportion of unsatisfied individuals and size of the median). RESULTS: The response rate was very high, over 97.0% in both units. A new variable, medical attention, was revealed, as explaining satisfaction at the primary care unit. The proportion of the total variability explained by the model was very high (over 99.4%) in both units, when comparing satisfied with unsatisfied customers. In the analysis of very satisfied versus all other customers, significant relationship was identified only in the case of the primary care unit, which explained a small proportion of the variability (41.9%). CONCLUSIONS: Discriminant analysis identified relationships not revealed by the previous analysis. It provided information about the proportion of the variability explained by the model. It identified non-significant relationships suggested by empirical analysis (e.g. the case of the relation very satisfied versus others in the secondary care unit). It measured the contribution of each independent variable to the explanation of the variation of the dependent one.

Postharvest changes and respiratory pattern of bacuri fruit (Platonia insignis Mart.) at different maturity stages during ambient storage

Bacuri (Platonia insignis, Mart.) is one of the most important among Amazonian fruits. However, little is known about its postharvest physiology, such as maturity stages, changes during ambient storage, and respiratory pattern. Fruits were harvested at three maturity stages based on epicarp colour: dark green, light green, and turning (50% yellow), in order to determine colour modification and respiratory pattern during ambient storage (25.2 ºC, 75.1 % RH). Fruit of all maturity stages showed, after three days of harvest, a non-climacteric respiratory pattern, with turning fruit presenting the highest CO2 production rate until the fourth storage day (177.63 mg.CO2.kg-1.h-1). Yellowing increased throughout storage as related to lightness, chromaticity, and hue angle reductions. Turning fruit can be stored at ambient conditions for up to 10 days without any loss in marketability.

Ichthyometry and electrical bioimpedance analysis to estimate the body composition of tambatinga

Body composition analysis is relevant to characterize the nutritional requirements and finishing phase of fish. The aim of this study was to investigate the relationship between ichthyometric (weight, total and standard length, density and yields), bromatological (fat, protein, ash and water content) and bioelectrical-impedance-analysis (BIA) (resistance, reactance, phase angle and composition indexes) variables in the hybrid tambatinga (Colossoma macropomum × Piaractus brachypomus). In a non-fertilized vivarium, 520 juveniles were housed and fed commercial rations. Then, 136 days after hatching (DAH), 15 fish with an average weight of 37.69 g and average total length of 12.96 cm were randomly chosen, anesthetized (eugenol) and subjected to the first of fourteen fortnightly assessments (BIA and biometry). After euthanasia, the following parts were weighed: whole carcass with the head, fillet, and skin (WC); fillet with skin (FS); and the remainder of the carcass with the head (CH). Together, FS and CH were ground and homogenized for the bromatological analyses. Estimates of the body composition and yields of tambatinga, with models including ichthyometric and BIA variables, showed correlation coefficients ranging from 0.81 (for the FS yield) to 1,00 (for the total ash). Similarly, models that included only BIA variables had correlation coefficients ranging from 0.81 (FS and CH yields) to 0.98 (for the total ash). Therefore, in tambatinga, the BIA technique allows the estimation of the yield of the fillet with skin and the body composition (water content, fat, ash, and protein). The best models combine ichthyometric and BIA variables.

Aspectos interessantes observados na meiose de alguns hemípteros

Particular aspects of the meiosis of two species of Hemiptera, namely Megalotomus pallescens (Stal) (Coriscidae) and Jadera sanguinolenta (Fabr.); (Corizidae) are described and discussed in this paper. Megalotomus pallescens This species has primary spermatocytes provided with 7 autosomal tetrads plus a single sex chromosome. The X is smaller than the autosomes and may be found either in the periphery of the circle formed by the autosomal tetrads or in the center together with the m-tetrad which always occupies this position. The X chromosome - In the primary spermatocytes this element, which is tetradiform, orients itself parallelly to the spindle axis and divides transversely by its median constriction. In the secondary spermatocytes it passes undivided to one pole. The m-chromosomes - These chromosomes have been frequently found in close association with the sex chromosome in nuclei wich have passed the diffuse stage, a fact which was considered as affording some evidence in support of the idea /developed by the present writer in another paper with regard to the origin of the m-chromosomes from the sex chromosome. Formation of tetrads - Tetrads appear at first as irregular areas of reticular structure, becoming later more and more distinct. Then, two chromosomal strands very loose and irregular in outline, connected whit each other by several transverse filaments, begin to develop in each area. Growing progressively shorter, thicker and denser, these strands soon give origin to typical Hemiptera tetrads. Jadera sanguinolenta Spermatogonia of this species have 13 chromosomes, that is, 10 autosomes, 2 m-chromosomes and one sex chromosome, one pair of autosomes being much larger than the rest. Chromosomes move toward the poles with both ends looking to them. Primary spermatocytes show 6 tetrads and a single X. The sex chromossome in the first division of the spermatocytes divides as if it was a tetrad, passing undivided to one pole in the second division. In the latter it does not orient, being found anywhere in the cells. Its most common situation in anaphase corresponds therefore to precession. Tetrads are formed here in an entirely different way : the bivalents as they become distinct in the nuclei which came out. of the diffuse stage they appear in form of two thin threads united only at the extremities, an aspect which may better be analized in the larger bivalent. Up from this stage the formation of the tetrads is a mere process of shortening and thickening of both members of the pair. Due to the fact that the paired chromosomes are well separated from each other throughout their entire lenght, the author concluded that chiasmata, if present, are accumulated at the very ends of the bivalents. If no chiasmata have been at all formed, then, what holds together the corresponding extremities must be a strong attraction developed by the kinetochores. If one interprets the bivalents represented in the figures 17-21 as formed by four chromatids paired by one of the ends and united by the opposite one, then the question of the diffuse attachment becomes entirely disproved since it is exactly by the distal extremities that the tetrads later will be connected with the poles. In the opinion of the present writer the facts referred to above are one of the best demonstration at hand of the continuity of the paired threads and at the same time of the dicentricity of Hemiptera chromosomes. In view of the data hitherto collected by the author the behavior of the sex chromosome of the Hemiptera whose males are of the XO type may be summarized as follows: a) The sex chromosome in the primary metaphase appears longitudinally divided, without transverse constriction. It is oriented with the extremities in the plane of the equator and its chromatids separate by the plane of division. (Euryophthalmus, Protenor). In the second division the sex chromosome, provided as it is with an active kinetochore at each end, orients itself with its lenght parallelly to the spindle axis and passes undivided to one pole (Protenor?), or loses to the other pole a centric end (Euryophthalmus) In the latter case it has to become dicentric by means of a longitudinal spliting beginning at the kinetochore. b) The sex chromosome in the primary metaphase is tetradiform, that is, it is provided with a longitudinal split and a median transverse constriction. Orients with its length paral lelly to the spindle axis (what is probably due to the kinetochores being not yet divided) and divides transversely. (Corizas hyalinus, Megalotomus pallescens). in the secondary metaphase the sex chromosome which turned to be dicentric in consequence of a longitudinal spliting initiated in the kineto chore, orients perpendicularly to the equatorial plane and without losing anyone of its extremities passes undivided to one pole (Megalotomus). Or, distending between both poles passes to one side, in which case it loses one of its ends to the other side. (Corizas hyalinus). c) The very short sex chromosome in the first division of the spermatocytes orients in the same manner aa the tetrads and divides transversely. In the second division, due to the inactivity o the inetochore, it remains monocentric and motionless anywhere in the cell, finishing by being enclosed in the nearer nucleus. In the secondary telophase it recuperates its dicentricity at the same time as the autosomal chromatids. (Jadera sanguinolenta, Diactor bilineatus). d) The sex chromosome in the first division orients in the equador with its longitudinal axis parallelly to the spindle axis passing integrally to one pole or, distending itself between the anaphase plates, loses one of its ends to the opposite pole. In this case it becomes dicentric in the prometaphase of the second division, behaving in this division as the autossomes. It thus divides longitudnally. (Pachylis laticomis, Pachylis pharaonis).

Biologia da Arsenura xanthopus (Walker, 1855) ( Lepidoptera - Adelocephalidae ), praga do «Açoita-Cavalo» (Luehea spp.) e notas sôbre seus inimigos naturais

Biology of Arsenura xanthopus (Walker, 1855) (Lep., Adelocephalidae), a pest of Luehea spp. (Tiliaceae), and notes on its natural enemies. In the beginning of 1950, one of the Authors made some observations about the biology of Arsenura xanthopus (Walker), in Piracicaba, State of S. Paulo, Brazil. From 1951 to 1953, both Authors continued the observations on such an important Adelocephalidae, the caterpillars of which represent a serious pest of Luehea spp. leaves. Actually, in some occasions, the caterpillars can destroy completely the leaves of the trees. The species is efficientely controlled by two natural enemies: an egg parasite (Tetrastichus sp., Hym., Eulophidae) and a fly attacking the last instar caterpillar (Winthemia tricolor (van der Wulp), Dip., Tachinidae). Tetrastichus sp. can destroy 100% of the eggs and the fly, 70 to 100% of the caterpillars. Indeed, facts as such are very interesting because we rarely know of a case of so complete a control of a pest by an insect. A. xanthopus had not yet been mentioned in our literature. Actually neither the systematic bibliography nor the economic one has treated of this species. However, a few other species of Arsenura are already known as living on Luehea spp. According to the Authors' observations, W. tricolor was also unknown by the Brazilian entomological literature. Arsenura xanthopus (Walker, 1855) After giving the sinonimy and a few historical data concerning the species, and its geographical distribution, the Authors discuss its placing in the genus Arsenura Duncan or Rhescyntis Huebner, finishing by considering Arsenura xanthopus as a valid name. The Authors put the species in the family Adelocephalidae, as it has been made by several entomologists. The host plant The species of Tiliaceae plants belonging to the genus Luehea are called "açoita-cavalo" and are well known for the usefulness of their largely utilized wood. The genus comprises exclusively American plants, including about 25 species distributed throughout the Latin America. Luehea divaricata Mart, is the best known species and the most commonly cultivated. Biology of Arsenura xanthopus Our observations show that the species passes by 6 larval stages. Eggs and egg-postures, all the 6 instars of the caterpillars as well as the chrysalid are described. The pupal period is the longest of the cycle, taking from 146 to 256 days. Data on the eclosion and habits of the caterpillars are also presented. A redescription of the adult is also given. Our specimens agreed with BOUVIER's description, except in the dimension between the extremities of the extended wings, which is a little shorter (107 mm according to BOUVlErVs paper against from 80 to 100mm in our individuals). Winthemia tricolor (van der Wulp, 1890) Historical data, geographical distribution and host are first related. W. tricolor had as yet a single known host-; Ar^-senura armida (Cramer). This chapter also contains some observations on the biolcn gy of the fly and on its behaviour when trying to lay eggs on the caterpillars' skin. The female of W. tricolor lays from 1 to 33 eggs on the skin of the last instar caterpillar. The mam region of the body where the eggs are laid are the membranous legs. Eggs are also very numerous oh the ventral surface of the thorax and abdomen. The. preference for such regions is easily cleared up considering the position assumed by the caterpillar when fixed motionless in a branch. In such an occasion, the fly approaches, the victim, puts the ovipositor out and lays the eggs on different parts of the body, mainly on the mentioned regions, which are much more easily reached. The eggs of the fly are firmly attached to the host's skin, being almost impossible to detach them, without having them broken. The minute larvae of the fly enter the body of, the host when it transforms into chrysalid. Chrysalids recentely formed and collected in nature f requentely show a few small larvae walking on its skin and looking for an adequate place to get into the body. A few larvae die by remaining in the skin of the caterpillar which is pushed away to some distance by the active movements of the chrysalid recentely formed. From 1 to 10 larvae completely grown may emerge from the attacked chrysalid about 8 days after their penetrating into the caterpillars' body and soon begin to look for an adequate substratum where they can transform themselves into pupae. In natural conditions, the metamorphosis occurs in the soil. The flies appear within 15 days. Tetrastichus sp. This microhymenoptera is economically the most interesting parasite, being commonly able to destroy the whole pos^ ture of the moth. Indeed, some days after the beginning of the infestation of the trees, it is almost impossible to obtain postures completely free of parasites. The active wasp introduces the ovipositor into the egg of the moth, laying its egg inside, from 80 to 120 seconds after having introduced it. A single adult wasp emerges from each egg. Sarcophaga lambens Wiedemann, 1830 During the observations carried out, the Authors obtained 10 flies from a chysalid that were recognized as belonging to the species above. S. lambens is a widely distributed Sarcophagidae, having a long list of hosts. It is commonly obtained from weak or died invertebrates, having no importance as one of their natural enemies. Sinonimy, list of hosts and distribution are presented in this paper. Control of Arsenura xanthopus A test has been carefully made in the laboratory just to find out the best insecticide for controlling A. xanthopus caterpillars. Four different products were experimented (DDT, Pa-rathion, BHC and Fenatox), the best results having been obtained with DDT at 0,25%. However, the Authors believe in spite of the initial damages of the trees, that the application of an insecticide may be harmful by destroying the natural agents of control. A biological desiquilibrium may in this way take place. The introduction of the parasites studied (Tetrastichus sp. and Winthemia tricolor) seems to be the most desirable measure to fight A. xanthopus.

Complex mating behavior in Adelosgryllus rubricephalus (Orthoptera, Phalangopsidae, Grylloidea)

We describe the mating behavior of Adelosgryllus rubricephalus Mesa & Zefa, 2004. In trials carried out in laboratory we verified the following mating sequence: (1) sexual recognition by antennation; (2) courtship with male turning his abdomen towards the female, performing mediolateral antennae vibration, jerking its body antero-posteriorly and stridulating intermittently, while receptive female drums on the male's abdomen tip, cerci and hind-tibia with her palpi or foretarsi; the male then stops and stays motionless for some seconds, extrudes the spermatophore and both restart the behavioral sequence described above; (3) copulation: male underneath female; with his tegmina inclined forward, and joins his genitalia to the female's to promote sperm transference ; the female steps off the male, occurring a brief end-to-end position; (4) postcopulation: without guarding behavior; male retains the spermatophore and eats it. We quantified elapsed time of each behavioral sequence and discussed its implications in the observed mating behavior.

Estudos sôbre óleos do fígado de cacão Desmobrânquios da família Sphyrnidae, Mir. Rib., gêneros Carcharias, Raf., Galeocerdo, Ranz., e Odontaspis, Shau

1. The author suggests a tecnique for the determination of vitamin A on shark liver oils in industrial plants. The advantages of using oly four ml. of reagent and of permitting a quickly rigorous reading by photoeletric cell, contribute to the possibility of the examination of a great number of samples daily; 2. It is described a survey on the vitamin A content of oils from shark livers, which has been made at the Finishing School Darcy Vargas, Marammaia Is., Rio de Janeiro State. The conclusions are the following: a) Male individuals have showed generally tendency for higher vitamin A pontency oils; b) The size of the fish does not interfere in the vitamin content of the oil (graphic 4); c) The data collected upon 3.085 individuals led to the conclusion that some species are richer in the reservated vitamin although it was possible to catch in the same specie fishes with widely variable potency in vitamin A. One fish belonging to the specie C. lamia produced the highest vitamin potency oil with 167.712 international units per gram; d) The fishing season appears to have no influence on the oils; e) The adventitous food seems to be the most important factor affecting the content of vitamin A of the shark-liver oils; 3. The presence and the quantity of vitamin D in those oils was investigated and two of the determinations are presented.