Recurrence of atrial septal defect in three generations

Beginning with a patient presenting with an atrial septal defect (ASD) of the secundum type, the genealogy was identified in four affected individuals who belonged to three successive generations of the same family. The defects were visually confirmed in all individuals and were found to be anatomically similar. No other congenital malformations were present in these individuals. The genealogy was identified in 1972, when ASD recurred in two generations, and it was concluded that the mechanism of transmission was autosomal recessive. The fifth individual, identified 21 years later, and having an anomaly identical to that of the others, was the child of a couple who had no consaguinity and whose mother was a member of the previously studied genealogy. Considering the absence of phenotype in the parents and the rarity of the ASD gene in the general population, the occurrence of the uniparental disomy for this family nucleus, and the same autosomal recessive mechanism of transmission by this affected individual is possible. This study reports the familial occurrence of ASD by genetic mechanisms of transmission, emphasizing the necessity for genetic-clinical studies in members of the familial nucleus in order to detect new carriers, who usually are asymptomatic, thereby allowing for early and adequate treatment of individuals who may be affected.

Double outlet right ventricle with anterior and left-sided aorta and subpulmonary ventricular septal defect

Double outlet right ventricle (DORV) is a heterogeneous group of abnormal ventriculoarterial connections where, by definition, both great arteries (pulmonary artery and aorta) arise primarily from the morphologically right ventricle. This condition affects 1-1.5% of the patients with congenital heart diseases, with a frequency of 1 in each 10,000 live births. We report the case of an 18-day-old infant with DORV and extremely rare anatomical features, such as anterior and left-sided aorta and subpulmonary ventricular septal defect (VSD). In addition to the anatomic features, the role of the echocardiogram for guiding the diagnosis and the surgical therapy of this congenital heart disease are discussed.

Surgical treatment of partial atrioventricular septal defect: functional analysis of the mitral valve in the postoperative period

OBJECTIVE: To study mitral valve function in the postoperative period after correction of the partial form of atrioventricular septal defect. METHODS: Fifty patients underwent surgical correction of the partial form of atrioventricular septal defect. Their mean age was 11.8 years and 62% of the patients were males. Preoperative echocardiography showed moderate and severe mitral insufficiency in 44% of the patients. The mitral valve cleft was sutured in 45 (90%) patients (group II - GII). Echocardiographies were performed in the early postoperative period, and 6 and 12 months after hospital discharge. RESULTS: The patients who had some type of arrhythmia in the postoperative period had ostium primum atrial septal defect of a larger size (2.74 x 2.08 cm). All 5 patients in group I (GI), who did not undergo closure of the cleft, had a competent mitral valve or mild mitral insufficiency in the preoperative period. One of these patients began to have moderate mitral insufficiency in the postoperative period. On the other hand, in GII, 88.8% and 82.2% of the patients had competent mitral valve or mild mitral insufficiency in the early and late postoperative periods, respectively. CONCLUSION: The mitral valve cleft was repaired in 90% of cases. Echocardiography revealed competent mitral valve or mild mitral insufficiency in 88.8% and 82.2% of GII patients in the early and late postoperative periods, respectively.

COMPARISON BETWEEN WOOD DRYING DEFECT SCORES: SPECIMEN TESTING X ANALYSIS OF KILN-DRIED BOARDS

It is important to develop drying technologies for Eucalyptus grandis lumber, which is one of the most planted species of this genus in Brazil and plays an important role as raw material for the wood industry. The general aim of this work was to assess the conventional kiln drying of juvenile wood of three clones of Eucalyptus grandis. The specific aims were to compare the behavior between: i) drying defects indicated by tests with wood specimens and conventional kiln-dried boards; and ii) physical properties and the drying quality. Five 11-year-old trees of each clone were felled, and only flatsawn boards of the first log were used. Basic density and total shrinkage were determined, and the drying test with wood specimens at 100 °C was carried out. Kiln drying of boards was performed, and initial and final moisture content, moisture gradient in thickness, drying stresses and drying defects were assessed. The defect scoring method was used to verify the behavior between the defects detected by specimen testing and the defects detected in kiln-dried boards. As main results, the drying schedule was too severe for the wood, resulting in a high level of boards with defects. The behavior between the defects in the drying test with specimens and the defects of kiln-dried boards was different, there was no correspondence, according to the defect scoring method.

Use of surgical mesh of different compositions in the correction of the abdominal wall defect in rats

Objective: To analyze the performance of two surgical meshes of different compositions during the defect healing process of the abdominal wall of rats. Methods: thirty-three adult Wistar rats were anesthetized and subjected to removal of an area of 1.5 cm x 2 cm of the anterior abdominal wall, except for the skin; 17 animals had the defect corrected by edge-to-edge surgical suture of a mesh made of polypropylene + poliglecaprone (Group U - UltraproTM); 16 animals had the defect corrected with a surgical mesh made of polypropylene + polidioxanone + cellulose (Group P - ProceedTM). Each group was divided into two subgroups, according to the euthanasia moment (seven days or 28 days after the operation). Parameters analyzed were macroscopic (adherence), microscopic (quantification of mature and immature collagen) and tensiometric (maximum tension and maximum rupture strength). Results : there was an increase in collagen type I in the ProceedTM group from seven to 28 days, p = 0.047. Also, there was an increase in the rupture tension on both groups when comparing the two periods. There was a lower rupture tension and tissue deformity with ProceedTM mesh in seven days, becoming equal at day 28. Conclusion : the meshes retain similarities in the final result and more studies with larger numbers of animals must be carried for better assessment.

Three-dimensional supersonic flow over a spike-nosed body of revolution

The unsteady, viscous, supersonic flow over a spike-nosed body of revolution is numerically investigated by solving the Navier-Stokes equations. The time-accurate computations are performed employing an implicit algorithm based on the second-order time-accurate LU-SGS scheme with the incorporation of a subiteration procedure to maintain time accuracy. The characteristics of the flow field for a Mach number of 3.0, Reynolds number of 7.87 x 10(6)/m, and angles of attack of 5 and 10 degrees are described. Self-sustained asymmetric shock wave oscillations were observed in the numerical computations for these angles of attack. The main characteristic of the flow field, as well as its influence on drag coefficient is discussed.

A strategy for obtaining social benefits from the gene revolution

The strategy described in the present paper offers details about the possibility for Brazil to play a more substantial role in the gene revolution. If successfully applied, the powerful science-based technology currently available in Brazil can contribute to extend the benefits of the gene revolution to the poorest countries, very much like the Green Revolution did in the past, thereby reducing the hunger syndrome which claimed the lives of millions of people in some Asian countries, particularly Pakistan and India, decades ago. In his visit to Brazil in February 2004, Norman Borlaug had the opportunity to witness the success of Brazilian agriculture. At a Conference held at ESALQ - Superior School of Agriculture Luiz de Queiroz in Piracicaba, SP, Brazil, he stated that the 21st century revolution will come from Brazil in the area of agriculture. He also said that reducing hunger is essential for the world to achieve socioeconomic stability. A central question remains unanswered: who will fund this revolution? The FAO 2003-2004 Annual Report listed the barriers preventing the gene revolution from reaching the poorest countries: inadequate regulatory procedures - Intellectual Property Rights and Biosafety, poorly functioning seed delivering systems and weak domestic plant breeding capacity; all are discussed in this paper.