The effect of irradiation and thermal process on beef heme iron concentration and color properties

The aim of this study was to evaluate the influence of irradiation and thermal process on the heme iron (heme-Fe) concentration and color properties of Brazilian cattle beef. Beef samples (patties and steaks) were irradiated at 0-10 kGy and cooked in a combination oven at 250 ºC for 9 minutes with 70% humidity. Total iron and heme iron (heme-Fe) concentrations were determined. The data were compared by multiple comparisons and fixed- effects ANOVA. Irradiation at doses higher than 5 kGy significantly altered the heme-Fe concentration. However, the sample preparation conditions interfered more in the heme-Fe content than did the irradiation. Depending on the animal species, meat heme iron levels between 35 and 52% of the total iron are used for dietetic calculations. In this study the percentage of heme-iron was, on average, 70% of the total iron showing that humidity is an important factor for its preservation. The samples were analyzed instrumentally for CIE L*, a*, and b* values.

Biochemical changes and color properties of fresh-cut green bean (Phaseolus vulgaris L. cv.gina) treated with calcium chloride during storage

Calcium chloride is widely used in industries as a firming agent, and also to extend shelf-life of vegetables. The aim of this study was to determine, the effect of different doses of calcium chloride on biochemical and color properties of fresh-cut green bean. Fresh-cut green beans were dipped for 90 seconds in 0.5%, 1%, 2% and 3% solution of calcium chloride at 25°C. The fresh-cut green bean samples were packaged in polystyrene foam dishes, wrapped with stretch film and stored in a cold room at 5±1°C temperature and 85-90% RH. Calcium chloride treatments did not retain the green color of samples. Whiteness index, browning index and total color difference (ΔE) values of CaCl2 treated samples were high. Saturation index and hue angle were low compared to the control, especially at higher doses of CaCl2. Polyphenol oxidase (PPO) enzyme activity in samples treated with CaCl2 at 3% doses, was low at the 7th days of storage than with other treatments. Fructose and sucrose content of samples increased in all treatment groups whereas glucose level decreased during the first 4th days of storage.

Preparation and properties of perichromic dye: an undergraduate laboratory

An undergraduate experiment that illustrates the phenomenon of perichromism-the sensitivity of a dye to its microenvironment, as assessed by color changes of its solutions-is described. An easily prepared perichromic imine is synthesized and characterized, and its solvatochromism, thermochromism, halochromism, and preferential solvation in binary solvent mixtures are demonstrated by visual inspection of its solutions. The results are rationalized by invoking solute - solvent interactions in the various media.

ANION-BINDING AND SENSING PROPERTIES OF NOVEL RECEPTORS BASED ON N-(INDOL-3-YLGLYOXYLYL)BENZYLAMINE

Indole-based receptors such as biindole, carbazole, and indolocarbazole are regarded as some of the most favorable anion receptors in molecular recognition. This is because indole groups possess N–H groups as hydrogen-bonding donors. The introduction of amide groups in the indole framework can induce strong binding properties and good water solubility. In this study, we designed and synthesized a series of N-(indol-3-ylglyoxylyl)benzylamine derivatives as novel and simple anion receptors. The receptors derived by aryl and aliphatic amines can selectively recognize F– based on a color change from colorless-to-yellow in DMSO. The receptors derived by hydrazine hydrate can recognize F–, AcO–, and H2PO4– by similar color changes in DMSO and can even enable the selective recognition of F– in a DMSO–H2O binary solution by the naked eye. Spectrographic data indicate that complexes are formed between receptors and anions through multiple hydrogen-bonding interactions in dual solutions.

Mechanical properties of castor beans subject to different drying temperatures aiming to disrupt the bean coat

In castor oil extraction process, the bean coat is abrasive to the equipment and releases substances that modify the oil color, reducing its quality. A potential solution would be to run the extraction by compressing only the endosperm. Due to lack of information, the objective of this study was to evaluate the influence of forced air drying at 40, 60, 80 and 100 ºC and farmyard drying, in the mechanical properties of the beans, aiming to break the bean coat. Castor beans were subjected to compression tests, in two perpendicular directions, at a strain rate of 0.6 mm.s-1. Average values of force, deformation energy, strain, all at rupture, and stiffness were used to evaluate the effects of dehydration. It was observed that the heat treatments did not alter the mechanical properties of castor beans, the strain and stiffness values discriminate the differences between the directions and had the lowest coefficients of variation. It was concluded that forced air drying, more costly than farmyard drying, does not bring benefits to the decortication. However, regardless the heat treatment used, the mechanical stress lengthwise is the most suitable to promote decortication.

Development and assessment of acceptability and nutritional properties of a light snack

A light snack was developed using a fat replacer as a flavor fixative agent. The product presented a calorie reduction of up to 47.5% in comparison with products available on the market. The impact of this fat replacer on the sensory properties was determined by comparing this light snack to the traditional ones. No significant difference in texture was observed; however, there was a difference in color (deltaE = 8.67), due mainly to luminosity (deltaL = 7.79). The light snack presented high sensory acceptability (7.27 ± 1.3; 82.5% of grades were > 7 on 9-point hedonic scale); no significant difference in snack acceptability was observed. However, the traditional snack was significantly preferred in sensory terms (p < 0.05). In an opinion survey when the consumers were informed about snack composition, 75% of them said that they would buy the light snack instead of the traditional one. The caloric and fat reductions allow the use of the claims "light snack" and "fat free", in accordance with the legislation of various countries. We conclude that it is technologically possible to use a fat replacer in snack production, resulting in a sensory acceptable light snack with great potential to replace traditional ones.

Lactobacillus plantarum AJ2 isolated from naturally fermented sausage and its effects on the technological properties of Milano-type salami

L. plantarum, strain AJ2, was isolated from naturally fermented sausage manufactured in the Southern region of Brazil and inoculated in Milano-type salami. The lactic culture exhibited the ability of growing in the product, decreasing pH in the first seven days of fermentation/maturation and the residual levels of nitrite and nitrate, as well as peroxide and TBARS values. The inoculated sausage had the highest intensity for brightness and red color, but did not present a difference in chemical composition and fatty acid composition, compared to the control.

Physical and chemical properties of granulated cane sugar "panelas"

"Panela" is a natural sweetener obtained by concentrating sugar cane juice and handmade in small factories. In the study carried out, the physical and chemical properties of two commercial brands of artisanal granulated panelas and of one made on an experimental level were determined. Three lots of each sample were analyzed. The parameters measured were moisture, a w, protein, ash, minerals, reducing sugars, sucrose, pH, color (L, a and b), insoluble solids (IS), transmittance a 720 nm and filterability. In addition, a qualitative test to detect sulphur dioxide was performed. The parameters with higher variability were moisture (1.66-4.36 g.100 g-1), a w (0.51-0.69), reducing sugars (4.58-11.48 g.100 g-1), pH (5.58-6.90), and color. Potassium was the most abundant mineral (229.52-1027.18 mg.100 g-1). An inverse relationship between IS and transmittance at 720 nm (R² = 0.96) and a direct relationship between IS and ash (R² = 0.94) were found. The sulphur dioxide test was negative for all the samples.

Color and chemical composition and of green corn produced under organic and conventional conditions

The present study aimed to evaluate the chemical properties of green corn, grown in both organic and conventional farming systems, using a completely randomized factorial design. Four corn varieties (AG 1051, BR 106, SWB 551 and VIVI) of green corn kernels were evaluated for color, proximate composition, total calories, carotenoids and bioactive amines. The farming system affected some chemical and physical characteristics of green corn, but this effect was dependent upon variety. In general, organic green corn kernels were reddish (a* color component) and had higher levels of β-carotene compared to the conventional ones, suggesting that these characteristics are related. Moreover, organic green corn had higher levels of total carbohydrates and total energy compared to conventional varieties. On the other hand, crude fiber levels were higher in conventional grains - an unexpected result that deserves further investigation. Finally, the levels of cadaverine and spermine bioactive amines were not affected either by the corn variety or by the farming system.

Partial substitution of nitrite by chitosan and the effect on the quality properties of pork sausages

The aim of the study was to evaluate the influence of partial nitrite replacement by chitosan on the quality of Ham Visking (a type of pork sausages). Five Ham Visking formulations were elaborated modifying the sodium nitrite (0.011; 0.016 or 0.0212%) and chitosan concentrations (0.25 or 0.5%) in the products. Sausages were stored at 4 ºC and physicochemical, microbiological, and sensorial evaluations were performed in order to estimate their shelf life. Chitosan can be used in pork sausages without affecting ensory attributes such as color although the panelists detected textural differences among the samples with chitosan, which suggests that there is some influence of deacetylation degree of chitosan on the textural behavior of sausages which still needed to be explained for a successful application of chitosan in meat products. The reduction of residual sodium nitrite did not affect the color and flavor of such products, but the use of chitosan increasedsignificantly the shelf life of sausages.

Effect of pectinolitic enzymes on the physical properties of caja-manga (Spondias cytherea Sonn.) pulp

Cajá-manga, also known as golden apple and hog-plum, is an exotic fruit native from Îles de la Société (French Polynesia), which was first introduced in Brazil in 1985. The pulp of ripe fruit was treated with the commercial enzymatic pool and its effect was evaluated in terms of yield, as well as the physical properties viscosity, turbidity and color (L* values). Response surface methodology was used and three levels were adopted for the independent variables temperature (30, 40, and 50 ºC), incubation time (30, 60 and 90 minutes) and enzyme concentration (0.01, 0.05, 0.09 v/v%). A central composite statistical design was used to guide the experimental work. The enzyme treatment highly increased both juice yield (up to 56%) and color (up to 8.6%) and strongly decreased viscosity (up to 57.4%), clarity (up to 77%) and turbidity (up to 85.5%). Incubation time was the most interacting facto, whereas temperature was the least one. Optimization analysis was carried out to reduce enzyme concentration to a minimum by superposing the contour plots of the tested properties, and the recommended ranges of the variables enzyme concentration, process temperature and incubation time were, respectively, 0.042-0.068%, 47.0-49.0 ºC and 82-90 minutes.

Functional properties and proximate composition of cactus pear cladodes flours

The objective of this research was to study the functional properties and proximate composition of three different flours prepared from cactus pear cladodes. Immature cactus pear cladodes were dried at 60 °C, 70 °C and 80 °C. The flours were analyzed for chemical composition, amino acid profile, fatty acid composition, functional properties and color. The analyses showed no significant differences in crude protein, total lipid, crude fiber and total ash content in the flours, possibly due to the drying temperature effect. Nevertheless, during the drying at 80 °C, a reduction of the water holding capacity (55%) was observed, along with a reduction of the green color intensity (34%) - characteristic of cactus pear. The heating produced larger concentrations of tyrosine, proline, aspartic acid, and glutamic acid. In the lipids of the flours, the most abundant fatty acids were palmitic acid (C16:0), linoleic acid (C18:2n6), linolenic acid (C18:3n3), and oleic acid (C18:1n9). The cladodes flours prepared at 60 °C presented a higher quality regarding their nutritional and functional properties.

Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

Given the broad acceptance of sour cassava starch biscuits in Brazil and the nutritional quality of quinoa flour, this study aimed to evaluate the effect of extrusion temperature, screw speed, moisture, and amount of quinoa flour on the physical properties of puffed snacks. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Effects of moisture and amount of quinoa flour on the expansion index and specific volume of snacks were observed. There was a pronounced increase in water solubility index of blends with the extrusion process with significant effects of all process parameters on the WSI. Higher water absorption index (WAI) was observed under high temperature, low moisture, and lower quinoa flour amount. Temperature and amount of quinoa flour influenced the color of the snacks. A positive quadratic effect of quinoa flour on hardness of products was observed. Blends of sour cassava starch and quinoa flour have good potential for use as raw material in production of extruded snacks with good physical properties.

Chemical and physical properties of aloe vera (Aloe barbadensis Miller) gel stored after high hydrostatic pressure processing

The aim of this study was to evaluate the influence of high hydrostatic pressure (150, 250, 350, 450, and 550 MPa), applied for 5 minutes, on antioxidant capacity, total phenolic content, color, firmness, rehydration ratio, and water holding capacity of aloe vera gel stored for 60 days at 4 °C. The analyzed properties of the pressurized gel showed significant changes after the storage period. The highest value of total phenolic content was found at 550 MPa. However, a decrease in the antioxidant capacity was observed for all pressurized gel samples when compared to the control sample (p < 0.05). The smallest changes in product color were observed at pressure levels between 150 and 250 MP. The application of high hydrostatic pressure resulted in lower gel firmness, and the lowest value was found at 150 MPa (p < 0.05). On the other hand, the untreated sample showed a greater decrease in firmness, indicating that high pressure processing preserves this property. The application of high hydrostatic pressure exhibited modifications in the food matrix, which were evaluated in terms of rehydration ratio and water holding capacity.

Effects of processing on physical properties of extruded snacks with blends of sour cassava starch and flaxseed flour

The opportunity to supplement common cassava biscuits with a product of higher nutritional value meets consumer expectations. In this work it was studied the effects of process parameters and flaxseed addition on physical properties of expanded snacks. Extrusion process was carried out using a single screw extruder in a factorial central composite rotatable design with four factors: flaxseed flour percentage (0-20%), moisture (12-20%), extrusion temperature (90-130 °C) and screw speed (190-270). The effect of extrusion variables was investigated in terms of expansion index, specific volume, water absorption index, water solubility index, color parameters (L*, a* ,b*) and hardness. The data analysis showed that variable parameters of the extrusion process and flaxseed flour affected physical properties of puffed snacks. Among the experimental conditions used in the present study, expanded snack products with good physical properties can be obtained under the conditions of 10% flaxseed flour, 230 rpm screw speed, temperature of 90 °C and moisture of 12%.