Soap bubble appearance in brain magnetic resonance imaging: cryptococcal meningoencephalitis

Although cryptococcal infections begin in the lungs, meningoencephalitis is the most frequently encountered manifestation of cryptococcosis among individuals with advanced immunosuppression. As the infection progresses along the Virchow-Robin spaces, these structures may become dilated with mucoid material produced by the capsule of the organism. We report a case of a 24-year-old man with cryptococcal meningoencephalitis in which magnetic resonance imaging showed clusters of gelatinous pseudocysts in the periventricular white matter, basal ganglia, mammillary bodies, midbrain peduncles and nucleus dentatus with a soap bubble appearance.

Bubble-Bubble Interaction in Horizontal Two-Phase Slug Flow

Modelling of the slug structure requires a new effort on fundamental research. To clarify some aspects of the horizontal slug flow, an experimental study of the behaviour of two isolated bubbles in a single-phase liquid flow was performed. This procedure was adopted to avoid the overlap of different phenomena induced by a train of long bubbles. The experimental facility consists of a 90-m horizontal PVC pipe with internal diameter of 0,053 m. The behaviour of two single air bubbles travelling in a water flow was studied. Focus was given on the influence of the distance between the bubbles on the velocity of the second bubble. This study allows the understanding of the mechanism of overtaking that takes place right after the slug formation and that precedes the coalescence of bubbles in a slug flow. The results show that bubbles placed behind a liquid slug smaller than a critical value move faster than the leading one. Otherwise, they move slower than the leading one.

ULTRASTRUCTURAL CHANGES IN Schistosoma mansoni MALE WORMS AFTER in vitro INCUBATION WITH THE ESSENTIAL OIL OF Mentha x villosa Huds

Introduction: The essential oil Mentha x villosa (MVEO) has a wide range of actions, including antibacterial, antifungal, antiprotozoal and schistosomicidal actions. The present study aimed to investigate the ultrastructural changes of MVEO on the tegument of adult Schistosoma mansoni. Materials and Methods: Different concentrations of MVEO were tested on S. mansoni adult worms in vitro. Ultrastructural changes on the tegument of these adult worms were evaluated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results: The MVEO caused the death of all worms at 500 μg mL-1 after 24 h. After 24h of 500 μg mL-1 MVEO treatment, bubble lesions were observed over the entire body of worms and they presented loss of tubercles in some regions of the ventral portion. In the evaluation by TEM, S. mansoni adult worms treated with MVEO, 500 μg mL-1, presented changes in the tegument and vacuoles in the syncytial matrix region. Glycogen granules close to the muscle fibers were visible. Conclusion: The ability of MVEO to cause extensive ultrastructural damage to S. mansoni adult worms correlates with its schistosomicidal effects and confirms earlier findings with S. mansoni.

Behavior of Biomphalaria glabrata Say, 1818 (Gastropoda: Planorbidae): I. Morphophysiology of the Mantle Cavity

Using longitudinal and transverse anatomical sections, we observed that the three cristae of the mantle of Biomphalaria glabrata (renal, rectal and dorsolateral cristae) divide the mantle cavity into three chambers which we designated air or pulmonary chamber, water inflow chamber and water outflow chamber. Using videotape filming, we observed the inflow and outflow of air and water into and from the mantle cavity and we related their probable functions such as flotation, oxygen reservoir and transport, excreta circulation and elimination, water skeleton, and modification of specific weight. To determine whether the air bubble may function as a physical gill in this species we submitted three groups of snails to different systems in which water contained the same level of dissolved oxygen whereas the gas phases were atmospheric air, pure nitrogen or pure oxygen. We observed the following parameters: time of permanence on the surface, time of immersion, and frequency at which the snails reached the surface. These results did not demonstrate a physical gill function; morphological analysis of the mantle cavity indicates this possibility

Preparação de carbonos porosos por moldagem sequencial

Porous carbons have received great attention because of their potential use as adsorbents, sensors, catalytic supports and others. Among the available methods for preparing these solids, the sequential templating emerges as an efficient way to tail carbon materials, with large specific surface areas, high porosity, controlled narrow pore size distribution and different functional groups. The template process is based on the infiltration of carbon precursors into the pores of inorganic frameworks. This work reviews the most important variables involved in the sequential template process to prepare micro, meso and macroporous carbon with tailored properties as well as their applications.

Horizontal Slug Flow in a Large-Size Pipeline: Experimentation and Modeling

The knowledge of the slug flow characteristics is very important when designing pipelines and process equipment. When the intermittences typical in slug flow occurs, the fluctuations of the flow variables bring additional concern to the designer. Focusing on this subject the present work discloses the experimental data on slug flow characteristics occurring in a large-size, large-scale facility. The results were compared with data provided by mechanistic slug flow models in order to verify their reliability when modelling actual flow conditions. Experiments were done with natural gas and oil or water as the liquid phase. To compute the frequency and velocity of the slug cell and to calculate the length of the elongated bubble and liquid slug one used two pressure transducers measuring the pressure drop across the pipe diameter at different axial locations. A third pressure transducer measured the pressure drop between two axial location 200 m apart. The experimental data were compared with results of Camargo's1 algorithm (1991, 1993), which uses the basics of Dukler & Hubbard's (1975) slug flow model, and those calculated by the transient two-phase flow simulator OLGA.

Hydrodynamics Characteristics and Gas-Liquid Mass Transfer in a Three Phase Fluidized Bed Reactor

This paper presents the experimental characterization of hydrodynamics and gas-liquid mass transfer in a three-phase fluidized bed containing polystyrene and nylon particles. The influence of gas and liquid velocities on phase holdups and volumetric gas-liquid mass transfer coefficient was investigated for flow conditions similar to those applied in biotechnological process. The phase holdups were obtained by the pressure profile technique. The volumetric gas-liquid mass transfer coefficient was obtained adjusting the experimental concentration profiles of dissolved oxygen in the liquid phase with the predictions of the axial dispersion model. According to experimental results the liquid holdup increases with the gas velocity, whereas the solid holdup decreases. The gas holdup increases significantly with the increase in gas velocity, and it shows for the three-phase fluidized bed comparable values or larger than those of bubble column. The volumetric gas-liquid mass transfer coefficient increases significantly with an increase in the air velocity for both bubble column and fluidized beds. In addition, in the operational condition of high liquid velocity, the presence of low-density particles in the bed increased the gas-liquid mass transfer, and thus the volumetric mass transfer coefficient values obtained in the fluidized bed were comparable or larger than those of bubble column.

Macroeconomic trouble and policy challenges in the wake of the financial bust

Contrasting with the 1929 great crisis, authorities intervened forcefully in 2008 to stop the disintegration of the financial system. Governments and central banks then sought to revise the prudential regulation in depth. It would be optimistic, however, to believe that prudential measures, alone, could deliver full economic recovery, at least in the countries that had been involved in the financial turmoil. Indeed, the collapse of the "state of confidence" and the negative effects of private debts on consumption and investment decisions have fed depressive forces and policy challenges which could hold for a while, even once the financial sector is made safe. On the one hand, the economic slowdown and the direct and indirect assistance provided by the governments to the private sectors are having a heavy impact on public finances, meanwhile, on the other hand, the massive amounts of money which artificially inflated the prices of housing and financial products could produce inflationary pressures in the post-crisis period, unless a new assets bubble is allowed for. Authorities could therefore be facing high unemployment in a damaged context of public deficits and inflationary pressures. The paper aims at discussing these new challenges. The inadequacy of inflation targets and fiscal orthodoxy in a depressed economy is emphasized, and the outlines of a Post Keynesian alternative policy are examined.

The "hot money" phenomenon in Brazil

Because of its high interest rates, Brazil attracts more and more speculative capital flows, called "hot money", under the form of foreign loans, direct or portfolio investments. Actually, the country is directly involved in a carry-trade strategy that tends to appreciate the real, what penalizes the Brazilian exportations of manufactured products. Moreover, capital inflows are extremely volatile, and their departure, causing a fall in loans granted to the Brazilian private banks, could provoke a dangerous burst of the speculative bubble they have contributed to form in the Brazilian real estate sector.