Public-domain software for root image analysis

In the search for high efficiency in root studies, computational systems have been developed to analyze digital images. ImageJ and Safira are public-domain systems that may be used for image analysis of washed roots. However, differences in root properties measured using ImageJ and Safira are supposed. This study compared values of root length and surface area obtained with public-domain systems with values obtained by a reference method. Root samples were collected in a banana plantation in an area of a shallower Typic Carbonatic Haplic Cambisol (CXk), and an area of a deeper Typic Haplic Ta Eutrophic Cambisol (CXve), at six depths in five replications. Root images were digitized and the systems ImageJ and Safira used to determine root length and surface area. The line-intersect method modified by Tennant was used as reference; values of root length and surface area measured with the different systems were analyzed by Pearson's correlation coefficient and compared by the confidence interval and t-test. Both systems ImageJ and Safira had positive correlation coefficients with the reference method for root length and surface area data in CXk and CXve. The correlation coefficient ranged from 0.54 to 0.80, with lowest value observed for ImageJ in the measurement of surface area of roots sampled in CXve. The IC (95 %) revealed that root length measurements with Safira did not differ from that with the reference method in CXk (-77.3 to 244.0 mm). Regarding surface area measurements, Safira did not differ from the reference method for samples collected in CXk (-530.6 to 565.8 mm²) as well as in CXve (-4231 to 612.1 mm²). However, measurements with ImageJ were different from those obtained by the reference method, underestimating length and surface area in samples collected in CXk and CXve. Both ImageJ and Safira allow an identification of increases or decreases in root length and surface area. However, Safira results for root length and surface area are closer to the results obtained with the reference method.

Software for interpolation of vegetative growth of yerba mate plants in 3D

The objective of this work was to build mock-ups of complete yerba mate plants in several stages of development, using the InterpolMate software, and to compute photosynthesis on the interpolated structure. The mock-ups of yerba-mate were first built in the VPlants software for three growth stages. Male and female plants grown in two contrasting environments (monoculture and forest understory) were considered. To model the dynamic 3D architecture of yerba-mate plants during the biennial growth interval between two subsequent prunings, data sets of branch development collected in 38 dates were used. The estimated values obtained from the mock-ups, including leaf photosynthesis and sexual dimorphism, are very close to those observed in the field. However, this similarity was limited to reconstructions that included growth units from original data sets. The modeling of growth dynamics enables the estimation of photosynthesis for the entire yerba mate plant, which is not easily measurable in the field. The InterpolMate software is efficient for building yerba mate mock-ups.

Uso do software Estradas para determinação do espaçamento entre desaguadouros em estradas não pavimentadas do interior de Goiás

Estradas não pavimentadas correspondem a aproximadamente 90% da malha rodoviária brasileira. Estas, na maioria das vezes, são construídas sem a realização de estudos prévios, estando sujeitas a vários tipos de problemas. Um dos principais fatores de deterioração dessas vias é a ineficiência do sistema de drenagem. Neste trabalho simulou-se o espaçamento entre desaguadouros em estradas não pavimentadas, utilizando-se um software desenvolvido com base num modelo matemático de dimensionamento de sistemas de drenagem em estradas não pavimentadas. Utilizaram-se valores de erodibilidade, tensão crítica de cisalhamento e massa específica para diferentes solos de estradas, localizadas no Estado de Goiás. Simularam-se cenários considerando alterações na declividade (1, 5, 10 e 15%) e na seção transversal do canal com relações entre altura e largura de 1:1, 1:2, 1:5 e 1:10. O modelo respondeu sensivelmente às alterações na declividade, na seção transversal do canal e nas de resistência do solo. Os espaçamentos obtidos indicaram que, estradas com declividades inferiores a 5%, mesmo com elevados valores de erodibilidade permitiram espaçamentos viáveis em aspectos construtivos. No entanto, para as declividades de 10 e 15%, os espaçamentos, na maioria dos casos, apresentaram dimensões reduzidas, tornando-se impraticáveis, sendo necessário, nestes casos, proteção do canal ou alteração de suas características hidráulicas.

Dinâmica da acumulação de capacidades inovadoras: evidências de empresas de software no Rio de janeiro e em São Paulo

São escassos estudos sobre a dinâmica da acumulação de capacidades inovadoras. Este artigo examina o tema em oito empresas de software em São Paulo e Rio de Janeiro, encontrando: diferenças inter e intraempresariais em termos da direção e taxa de acumulação de capacidade para funções tecnológicas específicas; acúmulo de capacidade tecnológica mais rápido em empresas mais jovens; e decréscimo das taxas de acumulação tecnológica à medida que as empresas se aproximam de níveis mais inovadores de capacidades, demonstrando a potencialidade para aceleração do processo. Tais evidências são relevantes para o entendimento da acumulação tecnológica e fornecem uma noção do tempo necessário para se obterem benefícios de esforços de aprendizagem e construção de capacidade inovadora.

Atratividade de projetos de software livre: importância teórica e estratégias para administração

Milhares de Projetos de Software Livre (PSL) foram e continuam sendo criados na Internet. Esse cenário aumenta as oportunidades de colaboração tanto quanto acirra a concorrência por usuários e contribuidores, que elevariam esses projetos a níveis superiores aos que seriam alcançados por seus fundadores sozinhos. E dado que o aprimoramento por meio de colaboração é o principal objetivo dos fundadores de PSL, a importância de entender e administrar a capacidade de atrair usuários e contribuidores fica estabelecida. Para auxiliar pesquisadores e fundadores nesse desafio, o conceito de atratividade é introduzido neste artigo, que desenvolve um ferramental teórico-gerencial sobre as causas, indicadores e consequências da atratividade, viabilizando sua administração estratégica.

Knowledge cities: a taxonomy for analyzing software and information service clusters

Software and information services (SIS) have become a field of increasing opportunities for international trade due to the worldwide diffusion of a combination of technological and organizational innovations. In several regions, the software industry is organized in clusters, usually referred to as "knowledge cities" because of the growing importance of knowledge-intensive services in their economy. This paper has two primary objectives. First, it raises three major questions related to the attractiveness of different cities in Argentina and Brazil for hosting software companies and to their impact on local development. Second, a new taxonomy is proposed for grouping clusters according to their dominant business segment, ownership pattern and scope of operations. The purpose of this taxonomy is to encourage further studies and provide an exploratory analytical tool for analyzing software clusters.

PROPOSTA DE INVESTIGAÇÃO SOBRE O USO DE SOFTWARE NO SUPORTE À INOVAÇÃO EM SERVIÇOS

RESUMOEste artigo examina os objetivos, instrumentos e características das inovações habilitadas por Tecnologias da Informação e Comunicação (TICs) no Brasil, enfatizando as tecnologias utilizadas, os canais habilitados pelas ferramentas digitais, os processos de aprendizado para inovação e as mudanças organizacionais necessárias para o uso de ferramentas avançadas. A metodologia consiste na adaptação de taxonomias existentes para os propósitos específicos da pesquisa e a realização de uma pesquisa de campo com o auxílio do software Atlas.ti. Os resultados mostram que as inovações habilitadas por TIC não constituem eventos isolados e pontuais, uma vez que alteram processos, formas de relacionamento com parceiros e clientes, e requerem uma maior integração de funções organizacionais. Importantes diferenças foram observadas em função do porte da empresa, da internacionalização das operações, da capacitação técnica e do grau de acesso a ferramentas proprietárias.

Housework, paid work and psychiatric symptoms

OBJECTIVE: To evaluate the hypothesis that work burden, the simultaneous engagement in paid work and unpaid family housework, is a potential risk factor for psychiatric symptoms among women. METHODS: A cross-sectional study was carried out with 460 women randomly selected from a poor area of the city of Salvador, Brazil. Women between 18 to 70 years old, who reported having a paid occupation or were involved in unpaid domestic activities for their families, were eligible. Work burden-related variables were defined as: a) double work shift, i.e., simultaneous engagement in a paid job plus unpaid housework; and b) daily working time. Psychiatric symptoms were collected through a validated questionnaire, the QMPA. RESULTS: Positive, statistically significant associations between high (>7 symptoms) QMPA scores and either double work shift (prevalence ratio -- PR=2.04, 95% confidence interval -- CI: 1.16, 2.29) or more than 10 hours of daily work time (PR=2.29, 95% CI: 1.96, 3.43) were found after adjustment for age, marital status and number of pre-school children. CONCLUSIONS: Major correlates of high QMPA scores are work burden variables. Being married or having pre-school children are also associated with high QMPA scores only when associated with work burden.

BASS 4: a software system for ergonomic design and evaluation of working hours

OBJECTIVE: To extend an existing computer programme for the evaluation and design of shift schedules (BASS 3) by integrating workload as well as economic aspects. METHODS: The redesigned prototype BASS 4 includes a new module with a suitable and easily applicable screening method (EBA) for the assessment of the intensity of physical, emotional and cognitive workload components and their temporal patterns. Specified criterion functions based on these ratings allow for an adjustment of shift and rest duration according to the intensity of physical and mental workload. Furthermore, with regard to interactive effects both workload and temporal conditions, e.g. time of day, are taken into account. In a second new module, important economic aspects and criteria have been implemented. Different ergonomic solutions for scheduling problems can now also be evaluated with regard to their economic costs. RESULTS: The new version of the computer programme (BASS 4) can now simultaneously take into account numerous ergonomic, legal, agreed and economic criteria for the design and evaluation of working hours. CONCLUSIONS: BASS 4 can now be used as an instrument for the design and the evaluation of working hours with regard to legal, ergonomic and economic aspects at the shop floor as well as in administrative (e.g. health and safety inspection) and research problems.

Brazilian WHOQOL-OLD Module version: a Rasch analysis of a new instrument

OBJECTIVE: To evaluate the Brazilian version of WHOQOL-OLD Module and to test potential changes to the instrument to increase its psychometric adequacy. METHODS: A total of 424 older adults living in a city in Southern Brazil completed the WHOQOL-OLD instrument, in 2005. Rasch analysis was used to explore the psychometric performance of the scale, as implemented by the RUMM2020 software. Item-trait interaction, threshold disorders, presence of differential item functioning and item fit, were analyzed. RESULTS: Two ("death and dying" and "sensory abilities") out of six domains showed inadequate item-trait interactions. Rescoring the response scale and deleting the most misperforming items led to scale improvement. The evaluation of domains and items individually showed that the "intimacy" domain does perform well in contrast to the findings using the classical approach. In addition, the "sensory abilities" domain does not derive an interval measure in its current format. CONCLUSIONS: Unidimensionality and local independence were seen in all domains. Changes in the response scale and deletion of problematic items improved the scale's performance.

Agreement between data obtained from repeated interviews with a six-years interval

The objective of the study was to compare information collected through face-to-face interviews at first time and six years later in a city of Southeastern Brazil. In 1998, 32 mothers (N=32) of children aged 20 to 30 months answered a face-to-face interview with structured questions regarding their children's brushing habits. Six years later this same interview was repeated with the same mothers. Both interviews were compared for overall agreement, kappa and weighted kappa. Overall agreement between both interviews varied from 41 to 96%. Kappa values ranged from 0.00 to 0.65 (very bad to good) without any significant differences. The results showed lack of agreement when the same interview is conducted six years later, showing that the recall bias can be a methodological problem of interviews.

Software for pattern recognition of the larvae of Aedes aegypti and Aedes albopictus

Software for pattern recognition of the larvae of mosquitoes Aedes aegypti and Aedes albopictus, biological vectors of dengue and yellow fever, has been developed. Rapid field identification of larva using a digital camera linked to a laptop computer equipped with this software may greatly help prevention campaigns.

A SARIMA forecasting model to predict the number of cases of dengue in Campinas, State of São Paulo, Brazil

INTRODUCTION: Forecasting dengue cases in a population by using time-series models can provide useful information that can be used to facilitate the planning of public health interventions. The objective of this article was to develop a forecasting model for dengue incidence in Campinas, southeast Brazil, considering the Box-Jenkins modeling approach. METHODS: The forecasting model for dengue incidence was performed with R software using the seasonal autoregressive integrated moving average (SARIMA) model. We fitted a model based on the reported monthly incidence of dengue from 1998 to 2008, and we validated the model using the data collected between January and December of 2009. RESULTS: SARIMA (2,1,2) (1,1,1)12 was the model with the best fit for data. This model indicated that the number of dengue cases in a given month can be estimated by the number of dengue cases occurring one, two and twelve months prior. The predicted values for 2009 are relatively close to the observed values. CONCLUSIONS: The results of this article indicate that SARIMA models are useful tools for monitoring dengue incidence. We also observe that the SARIMA model is capable of representing with relative precision the number of cases in a next year.

Artesunate + amodiaquine versus artemether-lumefantrine for the treatment of uncomplicated Plasmodium falciparum malaria in the Colombian Pacific region: a noninferiority trial

INTRODUCTION: In Colombia, there are no published studies for the treatment of uncomplicated Plasmodium falciparum malaria comparing artemisinin combination therapies. Hence, it is intended to demonstrate the non-inferior efficacy/safety profiles of artesunate + amodiaquine versus artemether-lumefantrine treatments. METHODS: A randomized, controlled, open-label, noninferiority (Δ≤5%) clinical trial was performed in adults with uncomplicated P. falciparum malaria using the 28‑day World Health Organization validated design/definitions. Patients were randomized 1:1 to either oral artesunate + amodiaquine or artemether-lumefantrine. The primary efficacy endpoint: adequate clinical and parasitological response; secondary endpoints: - treatment failures defined per the World Health Organization. Safety: assessed through adverse events. RESULTS: A total of 105 patients was included in each group: zero censored observations. Mean (95%CI - Confidence interval) adequate clinical and parasitological response rates: 100% for artesunate + amodiaquine and 99% for artemether-lumefantrine; the noninferiority criteria was met (Δ=1.7%). There was one late parasitological therapeutic failure (1%; artemether-lumefantrine group), typified by polymerase chain reaction as the MAD20 MSP1 allele. The fever clearance time (artesunate + amodiaquine group) was significantly shorter (p=0.002). Respectively, abdominal pain for artesunate + amodiaquine and artemether-lumefantrine was 1.9% and 3.8% at baseline (p=0.68) and 1% and 13.3% after treatment (p<0.001). CONCLUSIONS: Uncomplicated P. falciparum malaria treatment with artesunate + amodiaquine is noninferior to the artemether-lumefantrine standard treatment. The efficacy/safety profiles grant further studies in this and similar populations.

Performance of the Vitek 2 system software version 5.03 in the bacterial identification and antimicrobial susceptibility test: evaluation study of clinical and reference strains of Gram-positive cocci

Introduction. The genera Enterococcus, Staphylococcus and Streptococcus are recognized as important Gram-positive human pathogens. The aim of this study was to evaluate the performance of Vitek 2 in identifying Gram-positive cocci and their antimicrobial susceptibilities. Methods. One hundred four isolates were analyzed to determine the accuracy of the automated system for identifying the bacteria and their susceptibility to oxacillin and vancomycin. Results. The system correctly identified 77.9% and 97.1% of the isolates at the species and genus levels, respectively. Additionally, 81.8% of the Vitek 2 results agreed with the known antimicrobial susceptibility profiles. Conclusion. Vitek 2 correctly identified the commonly isolated strains; however, the limitations of the method may lead to ambiguous findings.