Experimental analysis of the flow between stay and guide vanes of a pump-turbine in pumping mode

An experimental study was conducted in a pump-turbine model in pumping mode, in order to characterize the flow field structure in the region between stay and guide vanes, using mainly the laser-Doppler anemometry in a two-color and back-scattered light-based system. The structure of the steady and unsteady flow was analyzed. The measurements were performed at three operation points. The obtained data provide appropriate boundary conditions and a good base of validation for numerical codes, and for the understanding of main loss mechanisms of this complex flow.

Identificação das estruturas músculo-ligamentares do assoalho pélvico feminino na ressonância magnética

OBJETIVO: Determinar a freqüência de identificação das estruturas músculo-ligamentares do assoalho pélvico por meio de exames de ressonância magnética e avaliar o índice de concordância entre os observadores. MÉTODO: Estudo prospectivo em 20 voluntárias assintomáticas, idade de 20 a 80 anos (média de 50 anos). Realizados exames de ressonância magnética pélvica (1,5 T) nas seqüências turbo spin-eco ponderadas em T1 e T2 nos planos axial e sagital. Os exames foram avaliados por dois observadores independentes, que procuraram identificar os músculos levantador do ânus (músculos coccígeo, pubococcígeo, iliococcígeo e puborretal), obturador interno e compressor da uretra e os ligamentos pubovesical e pubouretral. Os resultados foram comparados com base na freqüência de identificação das estruturas anatômicas e na concordância entre os observadores (índice kappa -- kapa). RESULTADOS: A freqüência de identificação das estruturas variou de 50% a 100%, sendo pouco inferior para os ligamentos. A concordância interobservador na identificação das estruturas foi a seguinte: músculos levantador do ânus e obturador interno (kapa=1), pubococcígeo (kapa=0,62), iliococcígeo (kapa=0,86), puborretal (kapa=0,27), coccígeo (kapa=0) e compressor da uretra (kapa=1), e ligamentos pubovesical (kapa=0,50) e pubouretral (kapa=0,58). CONCLUSÃO: A ressonância magnética de pelve permite identificar as principais estruturas músculo-ligamentares do assoalho pélvico na grande maioria dos indivíduos, com boa concordância interobservador.

Um banho termostático de baixo custo (temperatura ambiente até 0ºC)

Thermal baths to decrease ambient temperature are an indispensable tool for most research and teaching laboratories, especially those in tropical or equatorial regions. A simple and inexpensive thermal bath has been developed based on a scratched compressor. It has three possible setups for cooling: sample immersed into the bath, sample flowing through the bath, and cooling liquid flowing in a jacket around the sample. It has been tested for 40 months. The temperature ranges from room temperature to 0 °C, when using water. The repeatability is better than 3% and the precision varies from 0.5% to 2%.

Avaliação das câmaras frias usadas para o armazenamento de frutas e hortaliças no entreposto terminal de São Paulo (CEAGESP): CEAGESP

O tempo de vida pós-colheita de frutas e hortaliças está diretamente relacionado à temperatura de armazenamento do produto. Em condições controladas de temperatura e umidade relativa do ar, as reações metabólicas podem ser retardadas, proporcionando melhor conservação do produto. Foram realizadas avaliações das câmaras frias destinadas à estocagem de frutas e hortaliças na Companhia de Entrepostos e Armazéns Gerais de São Paulo, CEAGESP - São Paulo - SP, com o objetivo de identificar a situação das câmaras frias utilizadas nesse entreposto. As condições de estocagem dos produtos foram avaliadas por meio dos parâmetros: temperatura do ar, umidade relativa, isolamento, equipamento frigorífico (condensador, compressor, evaporador), piso, dimensões da câmara e da porta. Avaliou-se a eficiência de uso por meio do cálculo para a determinação da carga térmica. Observou-se que maçã e pêra possuem os maiores volumes comercializados, utilizando-se de estocagem pelo frio (63,25%), seguido pela banana (24,10%). Baseando-se no volume médio de comercialização dos permissionários, constatou-se que 73,91% possuem motores superdimensionados a sua capacidade calorífica de uso.

Pectus excavatum: abordagem terapêutica

The pectus excavatum treatment has two different approaches: non-surgical techniques (modified dynamic thoracic compressor, exercises and the vacuum bell) or surgical techniques (silastic or solid silicone implant, open surgical repair like sternochondroplasty and minimally invasive repair). The introduction of Nuss procedure improved the pectus excavatum treatment, but its low acceptance was due to the high complication rate (e.g. cardiac perfuration). The thoracoscopy use for bar mediastinal passage reduced the complication rate. In comparison with sternochondroplasty, the Nuss procedure has smaller incision, less blood loss and less operative time. However, it has more reoperations, complications, longer hospital stay and more readmission rates, more time of thoracic epidural catheter for postoperative analgesia and more need for analgesic after being discharged. Although Nuss procedure has been used in children, patients under ten years must be only observed. The Nuss procedure is applicable to moderate or light symmetrical pectus excavatum, without costal protrusion, in young and adolescents patients. Furthermore, the sternochondroplasty is applicable to severe or asymmetric pectus excavatum, with or without inferior costal protrusion. Therefore, Nuss procedure and sternocondroplasty are not antagonistic procedures, and they must be used in accordance with a treatment organogram and the technique choice must be by functional and aesthetic outcome.

Arc fusion of self-fluxed nickel alloys

Self-fluxed nickel alloys are usually flame fused after thermal spraying. However, due to the practical aspects of high temperatures reached during flame fusing, large structures such as the hydraulic turbines for power generation, can not be efficiently coated. An alternative is to fuse the sprayed coating with a gas tungsten electric arc. In this case, heating is much more intensive and substrate temperature during and after the fusing operation is much lower, thus reducing the possibility that any problem will occur. In this work, coatings of self-fluxed nickel alloy fused by flame and gas tungsten arc were evaluated as protection of hydraulic turbines against cavitational damage. Several tests were performed, including the ASTM ultrasonically vibration-induced cavitation, optical and scanning electronic microscopic metallography, and hardness tests. The results showed that the arc-fused coating presented better cavitation damage resistance, probably due to its finer microstructure. A field application of this new technique is also described. A self-fluxed Ni alloy was flame sprayed in critical regions of Francis-type hydraulic turbine blades and fused by a gas tungsten arc after spraying. The blades will be inspected during the next two years.