Estudo da influência do diluente reativo PGE na cinética de cura de resina epóxi utilizada em compósitos estruturais

Phenil glycidyl ether (PGE), a monofunctional diluent, has been used in epoxy resins formulations in order to increase the toughness of the epoxy molded composite. In a systematic study concerning its influence in the cure kinetics of the epoxy resin, it was used in concentrations of 2,5; 5,0; 10 and 20% in relation to a diglycidyl ether bisphenol-A (DGEBA)/diamino diphenil-sulfone (DDS) base matrix. Dynamic and isothermal scanning analysis were carried out using a differential scanning calorimety (DSC) equipment. For all the concentrations of PGE, a n order kinetics was observed, with n varing between 0,35 -- 0,91 as a function of the increase in the PGE concentration.

Phosphorus extracted by ion exchange resins and mehlich-1 from oxisols (latosols) treated with different phosphorus rates and sources for varied soil-source contact periods

Despite the large number of studies addressing the quantification of phosphorus (P) availability by different extraction methods, many questions remain unanswered. The aim of this paper was to compare the effectiveness of the extractors Mehlich-1, Anionic Resin (AR) and Mixed Resin (MR), to determine the availability of P under different experimental conditions. The laboratory study was arranged in randomized blocks in a [(3 x 3 x 2) + 3] x 4 factorial design, with four replications, testing the response of three soils with different texture: a very clayey Red Latosol (LV), a sandy clay loam Red Yellow Latosol (LVA), and a sandy loam Yellow Latosol (LA), to three sources (triple superphosphate, reactive phosphate rock from Gafsa-Tunisia; and natural phosphate from Araxá-Minas Gerais) at two P rates (75 and 150 mg dm-3), plus three control treatments (each soil without P application) after four contact periods (15, 30, 60, and 120 days) of the P sources with soil. The soil acidity of LV and LVA was adjusted by raising base saturation to 60 % with the application of CaCO3 and MgCO3 at a 4:1 molar ratio (LA required no correction). These samples were maintained at field moisture capacity for 30 days. After the contact periods, the samples were collected to quantify the available P concentrations by the three extractants. In general, all three indicated that the available P-content in soils was reduced after longer contact periods with the P sources. Of the three sources, this reduction was most pronounced for triple superphosphate, intermediate for reactive phosphate, while Araxá phosphate was least sensitive to the effect of time. It was observed that AR extracted lower P levels from all three soils when the sources were phosphate rocks, while MR extracted values close to Mehlich-1 in LV (clay) and LVA (medium texture) for reactive phosphate. For Araxá phosphate, much higher P values were determined by Mehlich-1 than by the resins, because of the acidity of the extractor. For triple superphosphate, both resins extracted higher P levels than Mehlich-1, due to the consumption of this extractor, particularly when used for LV and LVA.

Monomer conversion of composite dental resins photoactivated by a halogen lamp and a LED: a FT-Raman spectroscopy study

Eighteen circular blocks of resins cured either by a LED or a halogen lamp (20, 40 and 60 s), had their top (T) and bottom (B) surfaces studied using a FT-Raman spectrometer. Systematic changes in the intensity of the methacrylate C=C stretching mode at 1638 cm-1 as a function of exposure duration were observed. The calculated degree of conversion (DC) ranged from 45.0% (B) to 52.0% (T) and from 49.0% (B) to 55.0% (T) for the LED and halogen lamp, respectively. LED and halogen light produced similar DC values with 40 and 60 s of irradiation.

Color change using HSB color system of dental resin composites immersed in different common Amazon region beverages

The purpose of this study is to evaluate in vitro the color stability of composite resins when exposed to beverages with high coloring contents from the Amazon region. 240 samples from four different composite brands (Natural Look, Z350, 4Seasons and Opallis) of hue A3 were fabricated using an acrylic matrix. The samples were stored in distilled water at 37ºC for 24 hours. The initial color (T0) was registered using a Canon EOS Rebel XTi 10 mp camera, and then the samples were divided into four groups (n=15): G1 (coffee), G2 (açaí juice), G3 (energetic guaraná) and G4 (control - distilled water). The samples were exposed to solutions of DES (6hs) and RE (18hs) and placed in a double boiler under constant agitation, at 37ºC for 30 days. The samples were immersed in the coloring solutions for 15 minutes daily. After 7, 15 and 30 days, new photographic registers were made (T1, T2 and T3). The images were analyzed using Corel PHOTO-PAINT 12 software to identify the colors through the HSB system. The Kruskal-Wallis and t tests (p<0.05) demonstrated significant differences in color (hue, saturation and brightness). The results revealed that none of the tested composites showed color stability when exposed to coloring solutions, and that the Amazon region beverages (açaí juice and energetic guaraná) showed to be less coloring than coffee.

Chemical composition of the essential oils from two subspecies of Protium heptaphyllum

Qualitative and quantitative analyses of the volatile constituents from resin of Protium heptaphyllum (Aubl.) Marchand subsp. ulei (Swat) Daly (PHU), and Protium heptaphyllum (Aubl.) Marchand subsp. heptaphyllum (PHH), Burseraceae were performed using GC-MS and GC-FID. The resins were collected around the city of Cruzeiro do Sul, state of Acre, Brazil. Essential oils from the two subspecies were extracted by hydrodistillation with a yield of 8.6% (PHU) and 11.3% (PHH); the main components were terpinolene (42.31%) and p-cymene (39.93%) for subspecies ulei (PHU) and heptaphyllum (PHH), respectively.

Use of glass beads and CF 11 cellulose for removal of leukocytes from malaria-infected human blood in field settings

Passage of malaria infected blood through a two-layered column composed of acid-washed glass beads and CF 11 cellulose removes white cells from parasitized blood. However, because use of glass beads and CF 11 cellulose requires filtration of infected blood separately through these two resins and the addition of ADP, the procedure is time-consuming and may be inapropriate for use in the field, especially when large numbers of blood samples are to be treated. Our modification of this process yields parasitized cells free of contaminating leukocytes, and because of its operational simplicity, large numbers of blood samples can be processed. Our procedure also compares well with those using expensive commercial Sepacell resins in its ability to separate leukocytes from whole blood. As a test of usefulness in molecular biologic investigations, the parasites obtained from the blood of malaria-infected patients using the modified procedure yield genomic DNA whose single copy gene, the circumsporozite gene, efficiently amplifies by polymerase chain reaction.

Meliponini neotropicais: o gênero Partamona Schwarz, 1939 (Hymenoptera, Apidae, Apinae) - bionomia e biogeografia

This work, dedicated to the study of nesting habits of the species of the Neotropical genus Partamona Schwarz, is a sequence to the taxonomic revision recently published elsewhere. A total of 214 nests and nest aggregations of 18 species [Partamona epiphytophila Pedro & Camargo, 2003; P. testacea (Klug, 1807); P. mourei Camargo, 1980; P. vicina Camargo, 1980; P. auripennis Pedro & Camargo, 2003; P. combinata Pedro & Camargo, 2003; P. chapadicola Pedro & Camargo, 2003; P. nhambiquara Pedro & Camargo, 2003; P. ferreirai Pedro & Camargo, 2003; P. pearsoni (Schwarz, 1938); P. gregaria Pedro & Camargo, 2003; P. batesi Pedro & Camargo, 2003; P. ailyae Camargo, 1980; P. cupira (Smith, 1863); P. mulata Moure in Camargo, 1980; P. seridoensis Pedro & Camargo, 2003; P. criptica Pedro & Camargo, 2003; P. helleri (Friese, 1900)] were studied , including data about habitat, substrate, structural characteristics, construction materials and behavior. The descriptions of the nests are illustrated with 48 drawings. Partial data of the nests of P. bilineata (Say, 1837), P. xanthogastra Pedro & Camargo, 1997, P. orizabaensis (Strand, 1919), P. peckolti (Friese, 1901), P. aequatoriana Camargo, 1980, P. musarum (Cockerell, 1917) and P. rustica Pedro & Camargo, 2003 are also presented. Nests of P. grandipennis (Schwarz, 1951), P. yungarum Pedro & Camargo, 2003, P. subtilis Pedro & Camargo, 2003, P. vitae Pedro & Camargo, 2003, P. nigrior (Cockerell, 1925), P. sooretamae Pedro & Camargo, 2003 and P. littoralis Pedro & Camargo, 2003 are unknown. The species of Partamona build notable nest entrance structures, with special surfaces for incoming / exiting bees; some of them are extremely well-elaborated and ornamented, serving as flight orientation targets. All species endemic to western Ecuador to Mexico with known nesting habits (P. orizabaensis, P. peckolti, P. xanthogastra, P. bilineata, P. aequatoriana and P. musarum) build their nests in several substrates, non-associated with termitaria, such as cavities and crevices in walls, among roots of epiphytes and in bases of palm leaves, in abandoned bird nests, under bridges, and in other protected places, except P. peckolti that occasionally occupies termite nests. In South America, on the eastern side of the Andes, only P. epiphytophila and P. helleri nest among roots of epiphytes and other substrates, non-associated with termitaria. All other species studied (P. batesi, P. gregaria, P. pearsoni, P. ferreirai, P. chapadicola, P. nhambiquara, P. vicina, P. mourei, P. auripennis, P. combinata, P. cupira, P. mulata, P. ailyae, P. seridoensis, P. criptica and P. rustica) nest inside active termite nests, whether epigeous or arboreous. The only species that builds obligate subterranean nests, associated or not with termite or ant nests (Atta spp.) is P. testacea. Nests of Partamona have one vestibular chamber (autapomorphic for the genus) closely adjacent to the entrance, filled with a labyrinth of anastomosing pillars and connectives, made of earth and resins. One principal chamber exists for food and brood, but in some species one or more additional chambers are filled with food storage pots. In nests of P. vicina, there is one atrium or "false nest", between the vestibule and the brood chamber, which contains involucral sheaths, cells and empty pots. All structures of the nest are supported by permanent pillars made of earth and resins (another autapomorphy of the genus). The characters concerning nesting habits were coded and combined with morphological and biogeographic data, in order to hypothesize the evolutive scenario of the genus using cladistic methodology. The phylogenetic hypothesis presented is the following: (((((P. bilineata (P. grandipennis, P. xanthogastra)) (P. orizabaensis, P. peckolti)) (P. aequatoriana, P. musarum)) P. epiphytophila, P. yungarum, P. subtilis, P. vitae) (((((P. testacea (P. mourei, P. vicina)) (P. nigrior (P. auripennis, P. combinata))) (P. ferreirai (P. pearsoni (P. gregaria (P. batesi (P. chapadicola, P. nhambiquara)))))) ((((P. ailyae, P. sooretamae) P. cupira, P. mulata) P. seridoensis) P. criptica, P. rustica, P. littoralis)) P. helleri))). One area cladogram is presented. Dates of some vicariance / cladogenesis events are suggested. For bilineata / epiphytophila group, which inhabits the Southwestern Amazonia and the Chocó-Mexican biogeographical components, the origin of ancestral species is attributed to the Middle Miocene, when the transgressions of the Maracaibo and Paranense seas isolated the tropical northwestern South America from the eastern continental land mass. The next cladogenic event in the history of the bilineata / epiphytophila group is attributed to the Plio-Pleistocene, when the Ecuadorian Andes reached more than 3000 m, and the ancestral species was fragmented in two populations, one occupying the western Andes (ancestral species of the bilineata subgroup) and other the southwestern Amazon (ancestral species of the epiphytophila subgroup). Other aspects of the history of Partamona are also discussed.

Handling sticky resin by stingless bees (Hymenoptera, Apidae)

For their nest defense, stingless bees (Meliponini) collect plant resins which they stick on intruders like ants or cleptobiotic robber bees causing their immobilization. The aim of this article is to identify all parts of stingless bee workers contacting these sticky resins. Of special interest are those body parts with anti-adhesive properties to resin, where it can be removed without residues. For that, extensive behavioral observations during foraging flight, handling and application of the resin have been carried out. When handling the resin, all tarsi touch the resin while walking above it. For transportation from plants to the nest during foraging flight, the resin is packed to the corbicula via tarsi and basitarsi of front and middle legs. Once stuck to the resin or after the corbicula had been unloaded, the bee's legs have to be cleaned thoroughly. Only the tips of the mandibles, that form, cut and apply the sticky resin, seem to have at least temporarily resin-rejecting properties.

A natureza das substâncias de referência na avaliação de massas molares de resinas PBLH por meio de cromatografia de exclusão por tamanho e osmometria de pressão de vapor

The SEC and VPO behaviour of hydroxyl-terminated polybutadiene resins was investigated using toluene as solvent and polybutadiene and polystyrene as standards. The results show that molar mass obtained depend on the nature of the standards used in the calibration, specialy in SEC analysis.

Ultramicroeletrodos. Parte II: construção e aplicações

This work describes the techniques of construction and several applications of ultramicroelectrodes in electrochemistry and electroanalytical chemistry. Disc shaped UME are produced by embedding metal wires on insulating materials such as glass or epoxy resin. In the field of electrochemistry, UME have been applied in studies of the hydrogen evolution reaction and the electrocrystallization of metals. The negligible values of sensibility for ohmic drop and the enhanced mass transport rate by spherical diffusion are the main advantages of UME in these applications. New important conclusions regarding the phenomena under study were drawn from the experimental results. The applications in electroanalytical chemistry involved the determination of contaminants such as heavy metals and nitrites in natural waters and food products. The use of UME requires little sample manipulation and, in general, no need for oxygen removal or the addition of supporting electrolytes.

Construção e avaliação de um eletrodo tubular sensível ao íon hidrogênio como detector em sistemas de análise em fluxo

The construction of a tubular hydrogen ion-selective potentiometric electrode without inner reference solution, based on the tridodecylamine (TDDA) ionophore, and its evaluation in a flow system are described. TDDA was dissolved in 2-nitrophenyl octyl ether, dispersed in a PVC membrane and applied directly to a conducting support which consisted of an epoxy resin and graphite mixture. The electrode was designed with a tubular geometry to effort facilities to be coupled as part of a flow injection network. The main working characteristics such as response time, linear pH range, selectivity and life time were evaluated and compared with those obtained which a conventionally shaped electrode based on the same sensor. The electrode showed a slope of 51-52 mV dec-1 within a linear pH range from 4.0 up to 12.0.

Determinação de resíduos de organoclorados em águas fluviais do município de Viçosa - MG

In this work the contamination, by organochlorinated, of a drinking water source located in the region of Viçosa, MG, was evaluated. The identification and quantification of the analytes was carried out using a gas-chromatograph equipped with an electron capture detector after liquid-liquid extraction and concentration. Four insecticides, Aldrin, Epoxy heptachloride, Endrin and op'- DDT were detected in concentrations that are higher than the safety limits established in the Brazilian legislation.

Estado da arte da cromatografia gasosa de alta resolução e alta temperatura

The developments in stationary phase synthesis and capillary column technology, have opened new perspectives in analysis of high molecular mass compounds (³600 daltons) and thermolabile organic compounds by High Temperature High Resolution Gas Chromatography (HT-HRGC). HT-HRGC is a new analytical borderline and its application to the analysis of high molecular mass compounds is still in its infancy. The apolar and medium polar gum phases can now be operated at temperatures up to 400-480ºC, being used for the analysis of n-alcanes up to C-100, lipids, oligosaccharides, industrial resins, polyglycerols, cyclodextrins, porphyrins, etc. This technique should play a leading role as a powerful tool, for many different analysis types, in multidisciplinary fields of Science.

Principais métodos de caracterização da porosidade de resinas à base de divinilbenzeno

This paper reviews the most important methods used to characterize the porosity of styrene-divinylbenzene resins. Methods such as adsorption of nitrogen for determination of surface area and mercury intrusion porosimetry for characterization of pore size distribution are related.

Novel santalane sesquiterpenoids from the stem bark of Duguetia glabriuscula - Annonaceae

Five novel santalane-type sesquiterpenes were isolated from the stem bark of Duguetia glabriuscula - Annonaceae. Their structures have been established on the basis of spectral data and chemical evidences (¹H and 13C NMR, HMQC, HMBC) as (+)-alpha-santal-10-en-9-ol (1), (+)-alpha-santalan-10,11-epoxy-9-ol (2), alpha-santal-11-en-9,10-diol (3), (+)-alpha-santalan-9,10,11-triol (4), and (+)-alpha-santalan-9,11-epoxy-10-ol (5). Polycarpol, a triterpenoid, was also obtained.