20 resultados para Technology of building
em Scielo Saúde Pública - SP
Resumo:
Residual insecticide activity of BHC vapors from various building materials in controlled humidity chambers in the laboratory were significantly different. Laboratory-reared, first instar nymphs of Dipetalogaster maximus were exposed to vapors of BHC which were being released from the treated surfaces of building materials taken from Mambaí, Goiás.
Resumo:
Digital Libraries (DLs) are extremely complex information systems that support the creation, management, distribution, and preservation of complex information resources, while allowing effective and efficient interaction among the several societies that benefit from DL content and services. In this paper, we focus on our experience facing challenges of building, maintaining, and developing the Networked University Digital Library (www.nudl.org), an extension of the Networked Digital Library of Theses and Dissertations (www.ndltd.org). NUDL is a worldwide initiative that addresses making the intellectual property produced in universities more accessible, stimulating international collaboration across all disciplines. We detail technological aspects of our solutions and research activities carried out to provide powerful and enriched services for the communities served by this initiative.
Resumo:
This paper brings a comprehensive analysis of the peacebuilding process conducted by the UN in Timor-Leste. Drawing on fieldwork, interviews, and secondary sources, the paper brings light to the main fragilities of this process. Firstly, the paper briefly outlines the scholarly debate around UN peacebuilding process. Then, the paper brings an overview of the UN missions deployed to Timor-Leste. Finally, the paper identifies the major limitations of such engagement. By highlighting the main flaws of this peacebuilding process, the paper opens the space for (re)thinking alternative ways of building peace in post-conflict scenarios.
Resumo:
ABSTRACT OBJECTIVE To analyze oral health work changes in primary health care after Brazil’s National Oral Health Policy Guidelines were released. METHODS A literature review was conducted on Medline, LILACS, Embase, SciELO, Biblioteca Virtual em Saúde, and The Cochrane Library databases, from 2000 to 2013, on elements to analyze work changes. The descriptors used included: primary health care, family health care, work, health care policy, oral health care services, dentistry, oral health, and Brazil. Thirty-two studies were selected and analyzed, with a predominance of qualitative studies from the Northeast region with workers, especially dentists, focusing on completeness and quality of care. RESULTS Observed advances focused on educational and permanent education actions; on welcoming, bonding, and accountability. The main challenges were related to completeness; extension and improvement of care; integrated teamwork; working conditions; planning, monitoring, and evaluation of actions; stimulating people’s participation and social control; and intersectorial actions. CONCLUSIONS Despite the new regulatory environment, there are very few changes in oral health work. Professionals tend to reproduce the dominant biomedical model. Continuing efforts will be required in work management, training, and permanent education fields. Among the possibilities are the increased engagement of managers and professionals in a process to understand work dynamics and training in the perspective of building significant changes for local realities.
Resumo:
Vaccination of infants with conjugated Haemophilus influenzae type b (Hib) vaccines has been proven to reduce Hib meningitis by 95% and pneumoniae by 20%. The routine use of Hib vaccine is facilitated by the introduction of combination vaccines into the EPI (Expanded Plan of Immunization). The objective of this study was to compare the immunogenicity and reactogenicity of an extemporaneously mixed DTPw/Hib (diphtheria-tetanus-whole cell pertussis) combination, using the technology of two Brazilian manufacturers, against a licensed DTPw/Hib European combination in 108 infants vaccinated at 2, 4 and 6 months according to the local national schedule. The Brazilian combination was highly immunogenic with Hib seroprotection rates (anti-PRP > 0.15 mg /ml of 98% after 2 doses and 100% after 3). Also for tetanus and pertussis the new Brazilian combination was as immunogenic as the European counterpart, except the diphtheria seroprotection rates and titers were lower. There was also no clinically relevant difference in reactogenicity. If these feasibility results are confirmed, the Brazilian DTPw/Hib combination should help to boost the uptake of Hib vaccination in Brazil.
Resumo:
This article discusses the construction of tri-sector partnerships in three projects conducted in Brazil in different fields of intervention of public policy (access to water, basic education and performance of boards of rights of children and adolescents). Collaborative articulations involving the players from three sectors (the State, civil society and the market) are practices that are little studied in the Brazilian and even in the international context, as tri-sector partnerships are rare, despite the proliferation of lines of discourse in support of alliances between governments and civil society or between companies and NGOs in the management of public policy. As a research strategy, this study resorted to cooperative inquiry, a method that involves breaking down the boundaries between the subjects and the objects of the analysis. Besides working toward a better understanding of the challenges of building tri-sector partnerships in the Brazilian context, the article also tries to show the relevance to public policy studies of investigative methods based on the subjects studied, as a means of developing an understanding of the practices, lines of discourse and dilemmas linked to social action in social programs.
Resumo:
Clinical practice guidelines in nursing (CPG-N) are tools that allow the necessary knowledge that frequently remains specialist-internalised to be made explicit. These tools are a complement to risk adjustment systems (RAS), reinforcing their effectiveness and permitting a rationalisation of healthcare costs. This theoretical study defends the importance of building and using CPG-Ns as instruments to support the figure of the nursing supervisor in order to optimise the implementation of R&D and hospital quality strategies, enabling clinical excellence in nursing processes and cost-efficient reallocation of economic resources through their linear integration with SARs.
Resumo:
Tillage systems are a key element of the technology of crop production, both with a view to crop yield and from the perspective of soil conservation and sustainability of the production system. The aim of this paper was to evaluate the effects of five tillage systems on the physical properties of a cohesive Yellow Argisol. The experiment was installed in the field on January 21, 2011 and lasted 260 days, in an area previously used as pasture with Brachiaria grass without liming or fertilization, but irrigated by a low pressure spray system. The treatments, in five replications and in a randomized block design, consisted of: 1) disk plow (twice) + disk harrow + ridge-furrow tillage (raising a ridge along the planting row), 135 days after transplanting (DP + RID); 2) disk plow (twice) + disk harrow (DP no RID); 3) subsoiler (SB); 4) disk plow (twice) + disk harrow + scarification with three shanks along the plant row (DP + SPR); and 5) disk plow (twice) + disk harrow + scarification with three shanks in the total area (DP + STA). In all tillage systems, furrows were mechanically opened for the papaya plants. After the treatments, the mechanical resistance to penetration was determined, followed by soil moisture, mean weight diameter (MWD), geometric mean diameter (GMD), bulk density (BD), macroporosity (Ma), microporosity (Mi), and number of fruits per plant. There were differences in penetration resistance (PR) between treatments. The subsoiler was more effective to decrease RP to a distance of 0.35 m from the plants, perpendicular to the plant row. The scarifier resulted in a lower PR than DP or SB, even at the depth of 0.40 m, and it was more effective at greater distances perpendicular to the plant. All tillage systems induced a PR between 2.0 and 3.0 MPa at the depth with the highest concentration of papaya tree roots (0-0.25 m), improving the physical conditions to this depth. There was no statistical difference among the treatments for BD, Ma, Mi, MWD, and GMD at a depth of 0.20 m. The disk plow changed the physical properties of the soil most intensely to a depth of 0.20 m. The use of scarification, reduced tillage with a forest subsoiler, or ridge-furrow tillage did not improve the physical properties in the rhizosphere. Reduced tillage with a forest subsoiler resulted in a lower number of fruits per plant than all other treatments, which did not differ from each other.
Resumo:
The type of artificial light used for inducing photoperiod effect in begonia's seedlings at greenhouse has fundamental importance in the growth and development of these plants and directly reflects in the electrical energy consumption used in this production process. The objective of this research was to analyze the technical and economic feasibility of replacing the current technology of artificial lighting used by the producers (incandescent lamps), by the technology of discharge lamps with the purpose of inducing photoperiod in a greenhouse. The analysis results indicate that the discharge lamp of 32 W Tubular Fluorescent discharge lamp was the one that presented the lower peak demand and lower average energy consumption of 85.01% compared to incandescent filament lamp of 100 W that is the technology of bigger consumption and currently used by the producer.
Resumo:
This study was conducted to evaluate and compare the behavior of the heating inside poultry shed through gas hood and underfloor heating. The experiment was conducted in poultry shed belonging to the Federal Institute of Education, Science and Technology of Triângulo Mineiro Region, Uberlândia city  state of Minas Gerais (MG), Brazil. The dimensions of the shed are 24 meters long and 9.6 meters wide and with a ceiling height of 3.2 meters. The temperature was measured with an optical thermometer of Minipa brand, MT 350 model. It was used, to the analysis of temperature behavior, the public domain software FEMM 4.2, which uses finite elements techniques, with data collected from two lots. Underfloor heating is made using hot water flowing through a serpentine type system, which is installed below the bed; this hot water is from solar heaters. An energetic and economic assessment of the warming shed for raising chickens was realized. From the results obtained with the simulations, it may observe that the heating through the floor provides a more homogeneous distribution of temperature when compared with the hood heating. The flow of heat is upwards supplying, thus, the greatest need of heating of the bird, which is the pectoral part.
Resumo:
OBJECTIVE: to evaluate the impact of the new technology of multidetector computed tomography (MDCT) in improving the accuracy and early diagnosis of BSBI.METHODS: patients with blunt small bowel injuries (BSBI) grade> I were identified retrospectively and their CT scans reviewed by an experienced radiologist. Clinical and tomographic findings were analyzed and patients grouped as "pre-MDCT" and "post-MDCT", according to the time of implementation of a 64-slice MDCT.RESULTS: of the 26 patients with BSBI 16 had CT scans. Motor vehicle collision (62.5%) was the most frequent mechanism of injury. In the pre-MDCT period, five of the 13 patients (38.5%) had abdominal CT, and in the post-MDCT, 11 of 13 patients (84.6%) had the exam. During pre-MDCT, all CT scans were abnormal with findings of pneumoperitoneum (60%), free fluid (40%) and bowel wall enhancement (20%). In the post-MDCT group, all exams but one were abnormal and the most frequent findings were free fluid (90.9%), bowel wall enhancement (72.7%), and pneumoperitoneum (54.5%). However, the rate of delayed laparotomy did not change. The mortality rate in both groups were similar, with 20% during pre-MDCT and 18.2% during post-MDCT.CONCLUSION: the use of MDCT in abdominal trauma in our service has increased the sensibility of the diagnosis, but has had no impact on outcome so far.
Resumo:
Furosemide (40mg) was administered to 20 street dogs, 10 males and 10 females, in two different pharmaceutical forms: (1) compressed furosemide 40mg formulated at the Federal University of Pernambuco (UFPE-tablet), and (2) a commercial formulation with equal bioequivalence produced by the Laboratory for Pharmaceutical Technology of Pernambuco State (LAFEPE), the LAFEPE-furosemide. The study aimed to evaluate the kinetics of dissolution of the UFPE-tablet in order to analyze the behavior of bioavailability of the best formulation for veterinary use. The plasmatic concentrations of furosemide for the determination of parameters of pharmacological kinetics were analyzed by high-performance liquid chromatographic method (HPLC). The in vitro study accomplished through physiochemical analyses demonstrated that the formulas of the furosemide tablets attained the pharmaceutical requirements in agreement with USP 23 and the Brazilian Pharmacopoeia. The evaluation accomplished in dogs with UFPE-tablets given in only dose demonstrated uniformity in blood levels indicating stability in maintenance of the pharmaceutical formulation and efficiency in absorption of the active compound. These values are not significantly different in relation to the 5% confidence limit. Regarding maximum concentration (Tmax) time and global bioavaibility assessed by AUC means, there were no considerable differences as well. UFPE-furosemide displayed 743.492µg/mL.h as AUC average value whereas LAFEPE-furosemide had an average of 537.284µg/mL.h.
Resumo:
The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.
Resumo:
A new concept termed "radioautographology" is advocated. This term was synthesized from "radioautography" and "ology", expressing a new science derived from radioautography. The concept of radioautographology (RAGology) is that of a science whose objective is to localize radioactive substances in the biological structure of objects and to analyze and study the significance of these substances in the biological structure. On the other hand, the old term radioautography (RAG) is the technique used to demonstrate the pattern of localization of various radiolabeled compounds in specimens. The specimens used in biology and medicine are cells and tissues. They are fixed, sectioned and placed in contact with the radioautographic emulsions, which are exposed and developed to produce metallic silver grains. Such specimens are designated as radioautographs and the patterns of pictures made of silver grains are named radioautograms. The technicians who produce radioautographs are named radioautographers, while those who study RAGology are scientists and should be called radioautographologists. The science of RAGology can be divided into two parts, general RAGology and special RAGology, as most natural sciences usually can. General RAGology is the technology of RAG which consists of three fields of science, i.e., physics concerning radioactivity, histochemistry for the treatment of cells and tissues, and photochemistry dealing with the photographic emulsions. Special RAGology, on the other hand, consists of applications of general RAGology. The applications can be classified into several scientific fields, i.e., cellular and molecular biology, anatomy, histology, embryology, pathology and pharmacology. Studies carried out in our laboratory are summarized and reviewed. All the results obtained from such applications should be systematized as a new field of science in the future.