Lignification of the plant and seed quality of RR soybeans sprayed with herbicide glyphosate

Differences in levels of lignin in the plant between conventional and transgenic cultivars RR has been reported by several authors, however, there are few studies evaluating the influence of spraying of glyphosate on the lignin in the plant and RR soybean seeds. The aim of this study was to evaluate the physiological quality of RR transgenic soybean seeds and the lignin contents of plants sprayed with the herbicide glyphosate. The assays were conducted both in greenhouse and field in the municipality of Lavras, MG, in the agricultural year 2007/08. The experiment was arranged in a splitplot design with four replicates, considering the treatments hand weeding and herbicide glyphosate as plots, and five RR soybean cultivars (BRS 245 RR, BRS 247 RR, Valiosa RR, Silvânia RR and Baliza RR) as splitplots. In the greenhouse, the cultivars tested were BRS 245 RR and Valiosa RR in a randomized block design with four replicates. The sprayings were carried out at stages V3, V7 and early R5 (3L/ha). The 1000 seed weight, mechanical injury, germination and germination velocity index, emergence velocity index, accelerated aging, electrical conductivity and water soaking seed test, lignin content in the seed coat, in the stem and legumes were determined. The spraying of glyphosate herbicide, in greenhouse and field, did not alter the physiological quality of seeds and the lignin contents in the plant.

Activity and Residual Effect of Two Formulations of Lambdacyhalothrin Sprayed on Palm Leaves to Rhodnius prolixus

The insecticidal activity and residual effect of two formulations of lambdacyhalothrin were evaluated with Rhodnius prolixus;laboratory and field tests were conducted in the State of Chiapas, Mexico. The results indicate that the lethal concentrations of the active ingredient of SC (LC50 = 2.37 and LC90 = 8.5 mg, a.i./m²) were 4-8 times than those with the insecticide WP applied on R. prolixus bugs in palm leaves, a common building material for thatched roofs. Other investigators in South America recommended applying 30 mg a.i./m² in porous materials; we obtained that the products WP and SC were 3.5 and 16 times more effective on palm leaves. Regarding the evaluation of the residual effects in field spraying, there was up to 15 months persistence after the application of WP in two doses (8.6 mg a.i./m² and 3.752 mg a.i./m²) with SC. We consider R. prolixus highly susceptible to the employed pyrethroids; they could be used to control this vector in the state of Chiapas, Mexico.

Arc fusion of self-fluxed nickel alloys

Self-fluxed nickel alloys are usually flame fused after thermal spraying. However, due to the practical aspects of high temperatures reached during flame fusing, large structures such as the hydraulic turbines for power generation, can not be efficiently coated. An alternative is to fuse the sprayed coating with a gas tungsten electric arc. In this case, heating is much more intensive and substrate temperature during and after the fusing operation is much lower, thus reducing the possibility that any problem will occur. In this work, coatings of self-fluxed nickel alloy fused by flame and gas tungsten arc were evaluated as protection of hydraulic turbines against cavitational damage. Several tests were performed, including the ASTM ultrasonically vibration-induced cavitation, optical and scanning electronic microscopic metallography, and hardness tests. The results showed that the arc-fused coating presented better cavitation damage resistance, probably due to its finer microstructure. A field application of this new technique is also described. A self-fluxed Ni alloy was flame sprayed in critical regions of Francis-type hydraulic turbine blades and fused by a gas tungsten arc after spraying. The blades will be inspected during the next two years.

Computer programs for analysis of droplets sprayed on water sensitive papers

The use of water-sensitive papers is an important tool for assessing the quality of pesticide application on crops, but manual analysis is laborious and time-consuming. Thus, this study aimed to evaluate and compare the results obtained from four software programs for spray droplet analysis in different scanned images of water-sensitive papers. After spraying, papers with four droplet deposition patterns (varying droplet spectra and densities) were analyzed manually and by means of the following computer programs: CIR, e-Sprinkle, DepositScan and Conta-Gotas. The diameter of the volume and number medians and the number of droplets per target area were studied. There is a strong correlation between the values measured using the different programs and the manual analysis, but there is a great difference between the numerical values measured for the same paper. Thus, it is not advisable to compare results obtained from different programs.

Effect of thinning on flower and fruit and of edible coatings on postharvest quality of jaboticaba fruit stored at low temperature

Jaboticaba is a Brazilian fruit, native to the Atlantic forest, which belongs to the Myrtaceae family. In this work we describe the effect of the thinning of "flower", "fruit" and "flower & fruit" compared to non-thinned fruit (control) and of edible coatings with respect on nutritional composition, overall acceptability and shelf-life of jaboticaba ‘Sabara’, grown in an irrigated commercial orchard. "Flower and fruit" thinning allows fruit with higher quality as diameter, volume and mass. Non-thinned fruit shows higher yield, however fruit have lower quality. As a result of the improving quality at harvest, the shelf life was twice (~8 days) for thinned fruit. The lack of change in concentration of soluble sugar and absence of formation of volatile compounds during storage indicate that there was no natural fermentation of the jaboticaba pulp after harvest. Treatments with wax and calcium did not improve the jaboticaba shelf life.

Effect of chitosan-carvacrol edible coatings on the quality and shelf life of tilapia (Oreochromis niloticus) fillets stored in ice

Abstract Fish consumption has increased in recent years. However, fish meat is highly perishable, which demonstrates the need for technologies to preserve its quality. Edible coatings (EC) might provide an alternative to extend the shelf life of fish. The goal of this study was to evaluate the effect of EC of chitosan (C) in combination with carvacrol (CAR) on the physical and microbiological changes of tilapia fillets. Fillets were submerged for two minutes in different treatments (T1: control; T2: C 2%; T3: C 2% + 0.125% CAR; T 4: C 2% + 0.25% CAR). At the end of storage, T1 and T2 showed the lowest values of total volatile bases (TVB). The color parameters L*, a* and b* varied from each treatment. The texture decreased and the different treatments reduced the microbial population in relation to the control; T3 and T4 were the most effective. These results show that the use of C with CAR might be an alternative method to preserve the quality and safety of tilapia fillets.

Post-harvest conservation of organic strawberries coated with cassava starch and chitosan

The strawberry is as non-climacteric fruit, but has a high post-harvest respiration rate, which leads to a rapid deterioration at room temperature. This study aimed to evaluate the application of biodegradable coating on postharvest conservation of organic strawberries, cv. Camarosa, packed in plastic hinged boxes and stored at 10ºC. The treatments consisted of: a) control; b) 2% cassava starch; c) 1% chitosan; and d) 2% cassava starch + 1% chitosan. Physical and chemical characteristics of fruits were evaluated at 3, 6 and 9 days of storage, and microbiological and sensory analyses were carried out at the end of the storage period. The treatments influenced positively the post-harvest quality of organic strawberries. The coating cassava starch + chitosan provided the best results, with less than 6% of loss in fruit mass, lower counts of yeast and psychrophilic microorganisms and the best appearance according to the sensory analysis.

Uniformity of liquid distribution in the canopy of the bean plant, using the spectrophotometric analysis

Fungal diseases are important factors limiting common bean yield. White mold is one of the main diseases caused by soil pathogens. The objective of this study was to quantify the distribution of a fungicide solution sprayed into the canopy of bean plants by spectrophotometry, using a boom sprayer with and without air assistance. The experiment was arranged in a 2 x 2 x 2 factorial (two types of nozzles, two application rates, and air assistance on and off) randomized block design with four replications. Air assistance influenced the deposition of solution on the bean plant and yield increased significantly with the increased rate of application and air assistance in the boom sprayer.

Chemical sterilization in in vitro propagation of Arundina bambusifolia Lindl. and Epidendrum ibaguense Kunth

There is a great demand for simpler and less costly laboratory techniques and for more accessible procedures for orchid breeders who do not have the necessary theoretical basis to use the traditional seed and clone production methods of orchids in vitro. The aim of this study was to assess the use of sodium hypochlorite (NaClO) as a decontaminant in the process of inoculating adult orchid explants of Arundina bambusifolia and Epidendrum ibaguenses. Solutions of NaClO (1.200, 2.400, 3.600, 4.800 and 6.000 mg L-1 - equivalent to 50, 100, 150, 200 and 250 mL L-1 of commercial bleach - CB) were sprayed on the explants (1.0 mL) and the culture medium (GB5), in the presence or absence of activated charcoal (2 g L-1). The explants used were nodal segments of field-grown adult plants. The procedures for inoculating the explants were conducted outside the laminar flow chamber (LFC), except for the control treatment (autoclaved medium and explant inoculation inside the LFC). The best results for fresh weight yield, height and number of shoots were obtained using NaClO in solution at 1.200 mg L-1 (equivalent to 50 mL L-1 commercial bleach) with activated charcoal in the culture medium. Fresh weight figures were 1.10 g/jar for Arundina bambusifolia and 0.16 g/jar for Epidendrum ibaguenses. Spraying the NaClO solutions controls the contamination of the culture medium already inoculated with the explants.

Lutzomyia longipalpis behavior and control at an urban visceral leishmaniasis focus in Argentina

During the earlier stages of visceral leishmaniasis transmission in Posadas City, Misiones, both the night activity and attraction to humans of Lutzomyia longipalpis were assessed, in order to provide preliminary recommendations. The impact of peridomestic deltamethrin spraying performed by local officials was also evaluated. Although Lu. longipalpis were found in traps located over a dog the entire night, 90% of the females were captured from 20.30h to 1.30h, and only landed on a human when he was at a distance of 1.5 m from the dog. Peridomestic spraying of deltamethrin (25 mg/m²) reduced the sand fly capture up to seven days post-intervention without dispersion in the border of the sprayed areas. These results support the recommendations about time-space focus of the protection measures: first half of the night, in the backyard, with pets and domestic animals kept at least 5 m from humans. The deltamethrin as it was used did not seem very effective in this scenario; neither did the eventual use of bed nets, at least in adults, due to the place/hour of sand fly higher activity. This study strengthens the need for a multidisciplinary approach to develop prevention strategies based both on biological and anthropological studies.

Sensitivity of Gomez-Nuñez boxes for the detection of household infestation with Panstrongylus megistus

Four methods for detecting household infestations with Panstrongylus megistus were compared: 1) manual collection; 2) collection after pyrethrum application; 3) search viable eggs; and 4) Gomez-Nuñez boxes. Manual collection was the most sensitive method (23% infested), followed by pyrethrum (21%), Gomez-Nuñez boxes (15%) and viable eggs (12%). About 10% of infested houses were positive exclusively on the Gomez-Nuñez box test. More over, 6 out of the 7 houses positive exclusively on the Gomez-Nuñez method were located in a recently sprayed area, where P. megistus density was low. Inspection of Gomez-Nuñez boxes at 12 weekspost-application was twice as effective as inspection at 6 weekspost-application. Triatomine feces was the most common evidencefor thepresence of P. megistus found within Gomez-Nuñez boxes. Gomez-Nuñez boxes area a useful adjunct to manual collection in detecting domestic infestations with P. megistus, especially in areas where bug densities are low. However, the utility of Gomez-Nuhez boxes must be weighed against the time and labor they require.

The influence of humidity on the residual action of benzene hexachloride (BHC)

In controlled humidity chambers in the laboratory differences in the absorption velocity of BHC were observed depending on the substrate sprayed. While BHC is no longer used in Chagas' disease control this data could have relevance to spraying houses in a controlprogramme with other insecticides.

Mites (Arachnida, Acari) on Citrus sinensis L. Osbeck orange trees in the state of Amazonas, Northern Brazil

Despite the importance of citriculture in Brazil, very little is known about mite populations in citrus crops in the Northern Region. In the municipality of Manaus, 12 sprayed sweet orange orchards were surveyed every two weeks during seven months to record mite species amount, and to describe the abundance and distribution of the most important species. The size and age of the orchards varied from 3,360 to 88,080 m² and seven to 25 years, respectively. In the fourteen sampling period, leaves, twigs and fruits were collected from 12 trees, one per orchard. In total, 3,360 leaves, 672 twigs and 1,344 fruits were sampled from 168 trees. Mites were manually extracted from the fruits, and by the washing method on leaves and twigs. We identified pests with the potential to cause economic loss. Fourteen species of phytophagous and mycophagous mites from Eriophyidae, Tarsonemidae, Tenuipalpidae, and Tetranychidae were recorded. Brevipalpus phoenicis (Geijskes 1939) and Phyllocoptruta oleivora (Ashm., 1879), the two commonest phytophagous mites in other Brazilian regions were dominant, showing that local orchards are susceptible to their infestation. Eleven predatory mites were recorded, comprising 10% of the mite population, belonging to Phytoseiidae and Ascidae. Phytoseiidae was the richest family, with ten species. The results are discussed in relation to the temporal variation aspects and habitat use of the most important species. Long-term research encompassing chemical applications followed by evaluations of the mite community are necessary for a better management of the orchards, taking into consideration the seasonal phenology of key pests.

Tracer studies in the coffee plant (Coffea arabica L.)

Due to the great importance of coffee to the Brazilian economy, a good deal of the work carried out in the "Laboratório de Isótopos", E. E. A. "Luiz de Queiroz", Piracicaba, S. Paulo, Brazil, was dedicated to the study of some problems involving that plant. The first one was designed to verify a few aspects of the control of zinc deficiency which is common in many types of soils in Brazil. An experiment conducted in nutrient solution showed that the leaf absorption of the radiozinc was eight times as high as the root uptake; the lower surface of the leaves is particularly suited for this kind of absorption. Among the heavy metal micronutrients, only iron did not affect the absorption of the radiozinc; manganese, copper, and molybdenum brought about a decrease of fifty per cent in total uptake. In another pot experiment in which two soils typical of the coffee growing regions were used, namely, a sandy soil called "arenito de Bauru" and a heavy one, "terra roxa", only O.l and 0.2 per cent of the activity supplied to the roots was recovered", respectively. This indicates that under field conditions the farmer should not attempt to correct zinc deficiency by applying zinc salts to the soil: leaf sprays should be used wherever necessary. In order to find out the most suitable way to supply phosphatic fertilizers to the coffee plant, under normal farm conditions, an experiment with tagged superphosphate was carried out with the following methods of distribution of this material: (1) topdressed in a circular area around the trees; (2) placed in the bottom of a 15 cm deep furrow made around the plant; (3) placed in a semicircular furrow, as in the previous treatment; (4) sprayed directly to the leaves. It was verified that in the first case, circa 10 per cent of the phosphorus in the leaves came from the superphosphate; for the other treatments, the results ware, respectively: 2.4, 1.7, and 38.0 per cent. It is interesting to mention that the first and the last methods of distribution were those less used by the farmers; now they are being introduced in many coffee plantations. In a previous trial it was demonstrated that urea sprays were an adequate way to correct nitrogen deficiency under field conditions. An experiment was then set up in which urea-C14 was used to study the metabolism of this fertilizer in coffee leaves. In was verified that in a 9 hours period circa 95 per cent of the urea supplied to the leaves had been absorbed. The distribution of the nitrogen of the urea was followed by standard chemical procedures. On the other hand the fate of the carbonic moiety was studied with the aid of the radiochromatographic technique. Thus, the incorporation of C14 in aminoacids, sugars and organic acids was ascertained. Data obtained in this work gave a definite support to the idea that in coffee leaves, as in a few other higher plants, a mechanism similar to the urea cycle of animals does exist.

Estudos sôbre a alimentação mineral do cafeeiro. II: absorção do superfosfato radioativo pelo cafeeiro (Coffea arabica L., var. Bourbon Amarelo) em condições de campo

In order to find out the best way to supply phosphorus to coffee plants when growing in "terra roxa misturada", a red soil with a high fixing capacity, tagged superphosphate was applied by the following procedures: (1) topdressed in a circular strip around the trees; (2) placed in the bottom of a circular furrow 15 cm deep; (3) placed in a semicircular furrow also 15 cm deep; (4) sprayed directly to the leaves. In each case 150 gms. of ordinary superphosphate tagged with H3 P32 O4 to give 5 X 10(9) c.p.m. were given to the two and half year old coffee plants. It was found that for the several treatments of the total phosphorus in the leaves the following values, on a per cent basis, came from the applied superphosphates: (1) topdressed 10.2 per cent, (2) circular furrow 2.4 per cent, (3) semicircular furrow 1.7 per cent, (4) sprayed 38.0 per cent; one can see, then, that methods (2) and (3) commonly used by the coffee planters are a very inefficient way to supply phosphorus in this type of soil. The remarkable foliar absorption was checked twice: a water culture experiment was carried out, the radiophosphorus being supplied by brushing it in the upper and lower surfaces of a given leaf; radioactivity was detected all over the plant as a result both of absorption and translocation; on the other hand, leaves collected from the sprayed trees were radioautographed; the radioautographs showed the pattern of distribution of the P32 which indicates true absorption rather than a surface contamination. In another locality, an experiment was caried out with 8 year old plants growing in "arenito de Bauru" which is a sandy soil with much less phosphorus fixing capacity. In this experiment the aim was to compare absorption of tagged superphosphate by trees growin under mulch against plants not receiving this treatment, The uptake of phosphorus was the same for both sets of plants. In both field experiments soil samples down to 15 cm in the profile were collected and its 0.2NHC1 soluble phosphorus was counted; rather significant values were observed mainly in the upper 5 cm layers.