Public-domain software for root image analysis

In the search for high efficiency in root studies, computational systems have been developed to analyze digital images. ImageJ and Safira are public-domain systems that may be used for image analysis of washed roots. However, differences in root properties measured using ImageJ and Safira are supposed. This study compared values of root length and surface area obtained with public-domain systems with values obtained by a reference method. Root samples were collected in a banana plantation in an area of a shallower Typic Carbonatic Haplic Cambisol (CXk), and an area of a deeper Typic Haplic Ta Eutrophic Cambisol (CXve), at six depths in five replications. Root images were digitized and the systems ImageJ and Safira used to determine root length and surface area. The line-intersect method modified by Tennant was used as reference; values of root length and surface area measured with the different systems were analyzed by Pearson's correlation coefficient and compared by the confidence interval and t-test. Both systems ImageJ and Safira had positive correlation coefficients with the reference method for root length and surface area data in CXk and CXve. The correlation coefficient ranged from 0.54 to 0.80, with lowest value observed for ImageJ in the measurement of surface area of roots sampled in CXve. The IC (95 %) revealed that root length measurements with Safira did not differ from that with the reference method in CXk (-77.3 to 244.0 mm). Regarding surface area measurements, Safira did not differ from the reference method for samples collected in CXk (-530.6 to 565.8 mm²) as well as in CXve (-4231 to 612.1 mm²). However, measurements with ImageJ were different from those obtained by the reference method, underestimating length and surface area in samples collected in CXk and CXve. Both ImageJ and Safira allow an identification of increases or decreases in root length and surface area. However, Safira results for root length and surface area are closer to the results obtained with the reference method.

Uso do software Estradas para determinação do espaçamento entre desaguadouros em estradas não pavimentadas do interior de Goiás

Estradas não pavimentadas correspondem a aproximadamente 90% da malha rodoviária brasileira. Estas, na maioria das vezes, são construídas sem a realização de estudos prévios, estando sujeitas a vários tipos de problemas. Um dos principais fatores de deterioração dessas vias é a ineficiência do sistema de drenagem. Neste trabalho simulou-se o espaçamento entre desaguadouros em estradas não pavimentadas, utilizando-se um software desenvolvido com base num modelo matemático de dimensionamento de sistemas de drenagem em estradas não pavimentadas. Utilizaram-se valores de erodibilidade, tensão crítica de cisalhamento e massa específica para diferentes solos de estradas, localizadas no Estado de Goiás. Simularam-se cenários considerando alterações na declividade (1, 5, 10 e 15%) e na seção transversal do canal com relações entre altura e largura de 1:1, 1:2, 1:5 e 1:10. O modelo respondeu sensivelmente às alterações na declividade, na seção transversal do canal e nas de resistência do solo. Os espaçamentos obtidos indicaram que, estradas com declividades inferiores a 5%, mesmo com elevados valores de erodibilidade permitiram espaçamentos viáveis em aspectos construtivos. No entanto, para as declividades de 10 e 15%, os espaçamentos, na maioria dos casos, apresentaram dimensões reduzidas, tornando-se impraticáveis, sendo necessário, nestes casos, proteção do canal ou alteração de suas características hidráulicas.

Dinâmica da acumulação de capacidades inovadoras: evidências de empresas de software no Rio de janeiro e em São Paulo

São escassos estudos sobre a dinâmica da acumulação de capacidades inovadoras. Este artigo examina o tema em oito empresas de software em São Paulo e Rio de Janeiro, encontrando: diferenças inter e intraempresariais em termos da direção e taxa de acumulação de capacidade para funções tecnológicas específicas; acúmulo de capacidade tecnológica mais rápido em empresas mais jovens; e decréscimo das taxas de acumulação tecnológica à medida que as empresas se aproximam de níveis mais inovadores de capacidades, demonstrando a potencialidade para aceleração do processo. Tais evidências são relevantes para o entendimento da acumulação tecnológica e fornecem uma noção do tempo necessário para se obterem benefícios de esforços de aprendizagem e construção de capacidade inovadora.

Atratividade de projetos de software livre: importância teórica e estratégias para administração

Milhares de Projetos de Software Livre (PSL) foram e continuam sendo criados na Internet. Esse cenário aumenta as oportunidades de colaboração tanto quanto acirra a concorrência por usuários e contribuidores, que elevariam esses projetos a níveis superiores aos que seriam alcançados por seus fundadores sozinhos. E dado que o aprimoramento por meio de colaboração é o principal objetivo dos fundadores de PSL, a importância de entender e administrar a capacidade de atrair usuários e contribuidores fica estabelecida. Para auxiliar pesquisadores e fundadores nesse desafio, o conceito de atratividade é introduzido neste artigo, que desenvolve um ferramental teórico-gerencial sobre as causas, indicadores e consequências da atratividade, viabilizando sua administração estratégica.

Knowledge cities: a taxonomy for analyzing software and information service clusters

Software and information services (SIS) have become a field of increasing opportunities for international trade due to the worldwide diffusion of a combination of technological and organizational innovations. In several regions, the software industry is organized in clusters, usually referred to as "knowledge cities" because of the growing importance of knowledge-intensive services in their economy. This paper has two primary objectives. First, it raises three major questions related to the attractiveness of different cities in Argentina and Brazil for hosting software companies and to their impact on local development. Second, a new taxonomy is proposed for grouping clusters according to their dominant business segment, ownership pattern and scope of operations. The purpose of this taxonomy is to encourage further studies and provide an exploratory analytical tool for analyzing software clusters.

PROPOSTA DE INVESTIGAÇÃO SOBRE O USO DE SOFTWARE NO SUPORTE À INOVAÇÃO EM SERVIÇOS

RESUMOEste artigo examina os objetivos, instrumentos e características das inovações habilitadas por Tecnologias da Informação e Comunicação (TICs) no Brasil, enfatizando as tecnologias utilizadas, os canais habilitados pelas ferramentas digitais, os processos de aprendizado para inovação e as mudanças organizacionais necessárias para o uso de ferramentas avançadas. A metodologia consiste na adaptação de taxonomias existentes para os propósitos específicos da pesquisa e a realização de uma pesquisa de campo com o auxílio do software Atlas.ti. Os resultados mostram que as inovações habilitadas por TIC não constituem eventos isolados e pontuais, uma vez que alteram processos, formas de relacionamento com parceiros e clientes, e requerem uma maior integração de funções organizacionais. Importantes diferenças foram observadas em função do porte da empresa, da internacionalização das operações, da capacitação técnica e do grau de acesso a ferramentas proprietárias.

Comparative evaluation of underlying causes of death processed by the Automated Classification of Medical Entities and the Underlying Cause of Death Selection Systems

INTRODUCTION: The correct identification of the underlying cause of death and its precise assignment to a code from the International Classification of Diseases are important issues to achieve accurate and universally comparable mortality statistics These factors, among other ones, led to the development of computer software programs in order to automatically identify the underlying cause of death. OBJECTIVE: This work was conceived to compare the underlying causes of death processed respectively by the Automated Classification of Medical Entities (ACME) and the "Sistema de Seleção de Causa Básica de Morte" (SCB) programs. MATERIAL AND METHOD: The comparative evaluation of the underlying causes of death processed respectively by ACME and SCB systems was performed using the input data file for the ACME system that included deaths which occurred in the State of S. Paulo from June to December 1993, totalling 129,104 records of the corresponding death certificates. The differences between underlying causes selected by ACME and SCB systems verified in the month of June, when considered as SCB errors, were used to correct and improve SCB processing logic and its decision tables. RESULTS: The processing of the underlying causes of death by the ACME and SCB systems resulted in 3,278 differences, that were analysed and ascribed to lack of answer to dialogue boxes during processing, to deaths due to human immunodeficiency virus [HIV] disease for which there was no specific provision in any of the systems, to coding and/or keying errors and to actual problems. The detailed analysis of these latter disclosed that the majority of the underlying causes of death processed by the SCB system were correct and that different interpretations were given to the mortality coding rules by each system, that some particular problems could not be explained with the available documentation and that a smaller proportion of problems were identified as SCB errors. CONCLUSION: These results, disclosing a very low and insignificant number of actual problems, guarantees the use of the version of the SCB system for the Ninth Revision of the International Classification of Diseases and assures the continuity of the work which is being undertaken for the Tenth Revision version.

Risk of drug interaction: combination of antidepressants and other drugs

OBJECTIVE: To assess the frequency of combination of antidepressants with other drugs and risk of drug interactions in the setting public hospital units in Brazil. METHODS: Prescriptions of all patients admitted to a public hospital from November 1996 to February 1997 were surveyed from the hospital's data processing center in São Paulo, Brazil. A manual search of case notes of all patients admitted to the psychiatric unit from January 1993 to December 1995 and all patients registered in the affective disorders outpatient clinic in December 1996 was carried out. Patients taking any antidepressant were identified and concomitant use of drugs was checked. By means of a software program (Micromedex®) drug interactions were identified. RESULTS: Out of 6,844 patients admitted to the hospital, 63 (0.9%) used antidepressants and 16 (25.3%) were at risk of drug interaction. Out of 311 patients in the psychiatric unit, 63 (20.2%) used antidepressants and 13 of them (20.6%) were at risk. Out of 87 patients in the affective disorders outpatient clinic, 43 (49.4%) took antidepressants and 7 (16.2%) were at risk. In general, the use of antidepressants was recorded in 169 patients and 36 (21.3%) were at risk of drug interactions. Twenty different forms of combinations at risk of drug interactions were identified: four were classified as mild, 15 moderate and one severe interaction. CONCLUSION: In the hospital general units the number of drug interactions per patient was higher than in the psychiatric unit; and prescription for depression was lower than expected.

BASS 4: a software system for ergonomic design and evaluation of working hours

OBJECTIVE: To extend an existing computer programme for the evaluation and design of shift schedules (BASS 3) by integrating workload as well as economic aspects. METHODS: The redesigned prototype BASS 4 includes a new module with a suitable and easily applicable screening method (EBA) for the assessment of the intensity of physical, emotional and cognitive workload components and their temporal patterns. Specified criterion functions based on these ratings allow for an adjustment of shift and rest duration according to the intensity of physical and mental workload. Furthermore, with regard to interactive effects both workload and temporal conditions, e.g. time of day, are taken into account. In a second new module, important economic aspects and criteria have been implemented. Different ergonomic solutions for scheduling problems can now also be evaluated with regard to their economic costs. RESULTS: The new version of the computer programme (BASS 4) can now simultaneously take into account numerous ergonomic, legal, agreed and economic criteria for the design and evaluation of working hours. CONCLUSIONS: BASS 4 can now be used as an instrument for the design and the evaluation of working hours with regard to legal, ergonomic and economic aspects at the shop floor as well as in administrative (e.g. health and safety inspection) and research problems.

Effects of tissue handling and processing steps on PCR for detection of Mycobacterium tuberculosis in formalin-fixed paraffin-embedded samples

Development and standardization of reliable methods for detection of Mycobacterium tuberculosis in clinical samples is an important goal in laboratories throughout the world. In this work, lung and spleen fragments from a patient who died with the diagnosis of miliary tuberculosis were used to evaluate the influence of the type of fixative as well as the fixation and paraffin inclusion protocols on PCR performance in paraffin embedded specimens. Tissue fragments were fixed for four h to 48 h, using either 10% non-buffered or 10% buffered formalin, and embedded in pure paraffin or paraffin mixed with bee wax. Specimens were submitted to PCR for amplification of the human beta-actin gene and separately for amplification of the insertion sequence IS6110, specific from the M. tuberculosis complex. Amplification of the beta-actin gene was positive in all samples. No amplicons were generated by PCR-IS6110 when lung tissue fragments were fixed using 10% non-buffered formalin and were embedded in paraffin containing bee wax. In conclusion, combined inhibitory factors interfere in the detection of M. tuberculosis in stored material. It is important to control these inhibitory factors in order to implement molecular diagnosis in pathology laboratories.