Pressure drop coefficients for elliptic and circular sections in one, two and three-row arrangements of plate fin and tube heat exchangers

The objective of the present work is the experimental determination of pressure drop coefficients (loss coefficients) for elliptic and circular sections in one, two and three-row arrangements of plate fin and tube heat exchangers. The experiments permitted to correlate the dimensionless loss coefficient with the flow Reynolds number in the rectangular channel formed by the plate fins. The experimental technique consisted of the measurement of the longitudinal pressure distribution along the flow channel, for several values of air mass flow rate. The total number of data runs, each one characterized by the flow Reynolds number, was 216. The present geometry is used in compact heat exchangers for air conditioning systems, heaters, radiators, and others. Also, it is verified the influence of the utilization of elliptic tubes, instead of circular ones, in the pressure drop. The measurements were performed for Reynolds numbers ranging from 200 to 1900.

Moisture sorption isotherms and isosteric heat determination in Chilean papaya (Vasconcellea pubescens)

The moisture sorption isotherms of Chilean papaya were determined at 5, 20, and 45 ºC, over a relative humidity range of 10-95%. The GAB, BET, Oswin, Halsey, Henderson, Smith, Caurie and Iglesias-Chirife models were applied to the sorption experimental data. The goodness of fit of the mathematical models was statistically evaluated by means of the determination coefficient, mean relative percentage deviation, sum square error, root-mean-square error, and chi-square values. The GAB, Oswin and Halsey models were found to be the most suitable for the description of the sorption data. The sorption heats calculated using the Clausius-Clapeyron equation were 57.35 and 59.98 kJ·mol-1, for adsorption and desorption isotherms, respectively.

The impact of evaporative cooling on the thermoregulation and sensible heat loss of sows during farrowing

Pigs are more sensitive to high environmental temperatures explained by the inability of sweating and panting properly when compared to other species of farmed livestock. The evaporative cooling system might favor the thermal comfort of animals during exposure to extreme environmental heat and reduce the harmful effects of heat stress. The purpose of this study was to assess the sensible heat loss and thermoregulation parameters from lactating sows during summer submitted to two different acclimatization systems: natural and evaporative cooling. The experiment was carried out in a commercial farm with 72 lactating sows. The ambient variables (temperature, relative humidity and air velocity) and sows physiological parameters (rectal temperature, surface temperature and respiratory rate) were monitored and then the sensible heat loss at 21days lactation was calculated. The results of rectal temperature did not differ between treatments. However, the evaporative cooling led to a significant reduction in surface temperature and respiratory rate and a significant increase in the sow's sensible heat loss. It was concluded that the use of evaporative cooling system was essential to increase sensible heat loss; thus, it should reduce the negative effects of heat on the sows' thermoregulation during summer.

Effect of drying method on the adsorption isotherms and isosteric heat of passion fruit pulp powder

The sorption behavior of dry products is generally affected by the drying method. The sorption isotherms are useful to determine and compare thermodynamic properties of passion fruit pulp powder processed by different drying methods. The objective of this study is to analyze the effects of different drying methods on the sorption properties of passion fruit pulp powder. Passion fruit pulp powder was dehydrated using different dryers: vacuum, spray dryer, vibro-fluidized, and freeze dryer. The moisture equilibrium data of Passion Fruit Pulp (PFP) powders with 55% of maltodextrin (MD) were determined at 20, 30, 40 and 50 ºC. The behavior of the curves was type III, according to Brunauer's classification, and the GAB model was fitted to the experimental equilibrium data. The equilibrium moisture contents of the samples were little affected by temperature variation. The spray dryer provides a dry product with higher adsorption capacity than that of the other methods. The vibro-fluidized bed drying showed higher adsorption capacity than that of vacuum and freeze drying. The vacuum and freeze drying presented the same adsorption capacity. The isosteric heats of sorption were found to decrease with increasing moisture content. Considering the effect of drying methods, the highest isosteric heat of sorption was observed for powders produced by spray drying, whereas powders obtained by vacuum and freeze drying showed the lowest isosteric heats of sorption.

Turbulent heat transfer and pressure drop in pinned annular regions

Experiments were performed to determine average heat transfer coefficients and friction factors for turbulent flow through annular ducts with pin fins. The measurements were carried out by means of a double-pipe heat exchanger. The total number of pins attached to the inner wall of the annular region was 560. The working fluids were air, flowing in the annular channel, and water through the inner circular tube. The average heat transfer coefficients of the pinned air-side were obtained from the experimental determination of the overall heat transfer coefficients of the heat exchanger and from the knowledge of the average heat transfer coefficients of the circular pipe (water-side), which could be found in the pertinent literature. To attain fully developed conditions, the heat exchanger was built with additional lengths before and after the test section. The inner circular duct of the heat exchanger and the pin fins were made of brass. Due to the high thermal conductivity of the brass, the small tube thickness and water temperature variation, the surface of the internal tube was practically isothermal. The external tube was made of an industrial plastic which was insulated from the environment by means of a glass wool batt. In this manner, the outer surface of the annular channel can be considered adiabatic. The results are presented in dimensionless forms, in terms of average Nusselt numbers and friction factors as functions of the flow Reynolds number, ranging from 13,000 to 80,000. The pin fin efficiency, which depends on the heat transfer coefficient, is also determined as a function of dimensionless parameters. A comparison of the present results with those for smooth sections (without pins) is also presented. The purpose of such a comparison is to study the influence of the presence of the pins on the pressure drop and heat transfer rate.

Comparison between one-dimensional uncoupled and convection-conduction conjugated approaches in finned surface heat transfer

This work studies the forced convection problem in internal flow between concentric annular ducts, with radial fins at the internal tube surface. The finned surface heat transfer is analyzed by two different approaches. In the first one, it is assumed one-dimensional heat conduction along the internal tube wall and fins, with the convection heat transfer coefficient being a known parameter, determined by an uncoupled solution. In the other way, named conjugated approach, the mathematical model (continuity, momentum, energy and K-epsilon equations) applied to tube annuli problem was numerically solved using finite element technique in a coupled formulation. At first time, a comparison was made between results obtained for the conjugated problem and experimental data, showing good agreement. Then, the temperature profiles under these two approaches were compared to each other to analyze the validity of the one-dimensional classical formulation that has been utilized in the heat exchanger design.

Characterization of heat tolerance in wheat cultivars and effects on production components

Abstract: There is a need for heat tolerant wheat cultivars adapted to the expansion of cultivation areas in warmer regions due to the high demand of this cereal for human consumption. The objective of this study was to evaluate the effect of high temperatures on grain yield and yield components of wheat and characterize heat tolerant wheat genotypes at different development stages. The genotypes were evaluated in the field with and without heat stress. High temperatures reduced the number of spikelets per spike (21%), number of grains per spike (39%), number of grains per spikelet (23%), 1000-grain weight (27%) and grain yield (79%). Cultivars MGS 1 Aliança, Embrapa 42, IAC 24-Tucuruí and IAC 364-Tucuruí III are the most tolerant to heat stress between the stages double ridge and terminal spikelet; MGS 1 Aliança, BRS 264, IAC 24-Tucuruí, IAC 364-Tucuruí III and VI 98053, between meiosis and anthesis; and BRS 254, IAC-24-Tucuruí, IAC-364-Tucuruí III and VI 98053, between anthesis and physiological maturity. High temperatures reduce grain yield and yield components. The number of grains per spike is the most reduced component under heat stress. The genotypes differed in tolerance to heat stress in different developmental stages.

An evaluation of fibrous structure and physical characteristics of Cutia nut (Couepia edulis Prance) shell

The Cutia-nut (Couepia edulis Prance), a species originally from the Amazon region, has a kernel with reasonable nutritional value and a hard and thick woody shell that constitute most of the fruit. After the kernel removal, the shells are regarded as waste. The possibility of using such shells, as raw material for burning or charcoal production, as well as milled residue for structural reinforcement materials is quite feasible, considering environmental and economical aspects. There is, however, a complete lack of characterization of the Cutia-nut shell and other similar species which can aggregate desirable qualities for application as engineering material. In this study some analyses are presented aiming at providing information for potential uses of these residues. In general, the shells follow a regular shape with certain dimensional proportionality to the kernel. The shell is a fibrous material with high lignin content, present low water absorption and high resistance to natural degradation.

Synonymy between Lymnaea bogotensis Pilsbry, 1935 and Lymnaea cousini Jousseaume, 1887 (Gastropoda: Lymnaeidae)

The lymneid snail Lymnaea bogotensis Pilsbry 1935 is synonymized with L. cousini Jousseaume 1887, based on morphological comparisons of the reproductive systems. The shell, renal tube, and reproductive system are described and illustrated from specimens collected in the type locality and the municipality of Paipa, Colombia. Bibliographical records reveal L. columella to be the commonest lymneid in the country. The latter two species can be differentiated based on the morphology of the penial complex.

Effects of propofol on damage of rat intestinal epithelial cells induced by heat stress and lipopolysaccharides

Gut-derived endotoxin and pathogenic bacteria have been proposed as important causative factors of morbidity and death during heat stroke. However, it is still unclear what kind of damage is induced by heat stress. In this study, the rat intestinal epithelial cell line (IEC-6) was treated with heat stress or a combination of heat stress and lipopolysaccharide (LPS). In addition, propofol, which plays an important role in anti-inflammation and organ protection, was applied to study its effects on cellular viability and apoptosis. Heat stress, LPS, or heat stress combined with LPS stimulation can all cause intestinal epithelial cell damage, including early apoptosis and subsequent necrosis. However, propofol can alleviate injuries caused by heat stress, LPS, or the combination of heat stress and LPS. Interestingly, propofol can only mitigate LPS-induced intestinal epithelial cell apoptosis, and has no protective role in heat-stress-induced apoptosis. This study developed a model that can mimic the intestinal heat stress environment. It demonstrates the effects on intestinal epithelial cell damage, and indicated that propofol could be used as a therapeutic drug for the treatment of heat-stress-induced intestinal injuries.

Inflammatory cytokines and plasma redox status responses in hypertensive subjects after heat exposure

Hypertension is characterized by a pro-inflammatory status, including redox imbalance and increased levels of pro-inflammatory cytokines, which may be exacerbated after heat exposure. However, the effects of heat exposure, specifically in individuals with inflammatory chronic diseases such as hypertension, are complex and not well understood. This study compared the effects of heat exposure on plasma cytokine levels and redox status parameters in 8 hypertensive (H) and 8 normotensive (N) subjects (age: 46.5±1.3 and 45.6±1.4 years old, body mass index: 25.8±0.8 and 25.6±0.6 kg/m2, mean arterial pressure: 98.0±2.8 and 86.0±2.3 mmHg, respectively). They remained at rest in a sitting position for 10 min in a thermoneutral environment (22°C) followed by 30 min in a heated environmental chamber (38°C and 60% relative humidity). Blood samples were collected before and after heat exposure. Plasma cytokine levels were measured using sandwich ELISA kits. Plasma redox status was determined by thiobarbituric acid reactive substances (TBARS) levels and ferric reducing ability of plasma (FRAP). Hypertensive subjects showed higher plasma levels of IL-10 at baseline (P<0.05), although levels of this cytokine were similar between groups after heat exposure. Moreover, after heat exposure, hypertensive individuals showed higher plasma levels of soluble TNF receptor (sTNFR1) and lower TBARS (P<0.01) and FRAP (P<0.05) levels. Controlled hypertensive subjects, who use angiotensin-converting-enzyme inhibitor (ACE inhibitors), present an anti-inflammatory status and balanced redox status. Nevertheless, exposure to a heat stress condition seems to cause an imbalance in the redox status and an unregulated inflammatory response.

Changes in guava (Psidium guajava L. var. Paluma) nectar volatile compounds concentration due to thermal processing and storage

Guava nectars were formulated for approximately 10, 12, or 14 ºBrix, with 40% guava pulp. Sodium benzoate, 500 mg.kg-1 was used as preservative. The Brix value was adjusted with saturated sucrose syrup. The guava nectar was pasteurized (85 ºC/42 seconds) in tubular heat exchanger and then hot filled in 500 mL white glass bottles. The products were stored either at room temperature (25 ± 5 ºC) or refrigerated (5 ± 2 ºC) under fluorescent light exposure and analyzed on the day after processing (time zero) and also 40, 80, and 120 days of storage. Eight compounds were identified and quantified by Gas Chromatography (GC) -Mass Spectrometry (MS): hexanal, (E)-hex-2-enal, 1-hexenol, (Z)-hex-3-enol, (Z)-hex-3-enyl acetate, phenyl-3-propyl acetate, cinnamyl acetate, and acetic acid. There was no significant effect of thermal treatment on the volatile compound concentrations, except for a significant decrease (p = 0.0001) in hexanal and (Z)-hex-3-enyl acetate (p = 0.0029). As for the storage time, there was a much greater decrease in the esters contents, such as (Z)-hex-3-enyl and phenyl-3-propyl acetates. Cinnamyl acetate had the greatest decrease over storage time. Refrigeration was better than room temperature for guava nectar volatile compounds stability over storage time, mainly for esters compounds, which are important for the product aroma and flavor

The genus Bostryx in central western Argentina: anatomical and distributional description of four of its southernmost species (Gastropoda, Bulimulidae)

ABSTRACT The genus Bostryx Troschel, 1847 is endemic to South America, extending from Ecuador to Chile and Argentina. The southernmost Argentinian species of the genus that inhabit San Luis, San Juan and Mendoza provinces, specially the pre-Andes, Andes and Sierras Pampeanas mountain ranges, were examined. This is the first time the anatomy of Bostryx pastorei (Holmberg, 1912), Bostryx reedi (Parodiz, 1947) and Bostryx strobeli (Parodiz, 1956) has been described.Bostryx cordillerae (Strobel, 1874) is re-described regarding shell and anatomy due to new morphological data. The main differences among the species examined are based on shell characters. The distribution ofBostryx mendozanus (Strobel, 1874) and Bostryx cuyanus (Pfeiffer, 1867), other species found in this region, was also discussed.

Observations on the morphology of Australorbis nigricans

A morphological study was done on A. nigricans, based on the observation of shell, radula, renal region and genitalia of 50 specimens measuring 18 mm in diameter. The data obtained are to be compared with those recorded in our previous paper (PARAENSE & DESLANDES, 1955) on A. glabratus. The characteristics common to both species will not be mentioned here. The numerals refere to the means and their standard deviations: no special reference being done, they correspond to length measurementes. Shell - 18 mm in diameter, 6.37 ± 0.29 mm in greatest width, 6 whorls. Prevailing colur ferruginous sepia, a minority of olivaceous, ochreous, nigrescent and deeply black specimens being found. Right side variously depressed, umbilicated, 1.5 to 3.5 mm deep from the bottom of the umblicus to the highest level of the last whorl. Left side more depressed than the right one, broadly concave, 1.5 to 3.5 mm deep. Both sides show a varously distinct keel, that looks sharper at the left. Aperture deltoid, varying in outline and width. Body, extended - 60.26 ± 3.62 mm, less pigmented than in glabratus. Renal tube - 30.68 ± 1.69 mm, showing neither ridge nor pigmented line along its ventral surface, this negative character affording a sure means of separation from glabratus. Ovotestis - 14.48 ± 1.93 mm. Ovisperm duct - 13.04 ± 1.60 mm, including the non-unwound seminal vesicle. The latter was 0.97 ± 0,21 mm in greatest width. Carrefour - Resembling that of glabratus. Sperm duct - 21.36 ± 1.53 mm. Prostate - Prostate duct 7.14 ± 0.74 mm, collecting a row of long diverticula numbering 19.6 ± 3.1 and more separate than in glabratus. Last diverticulum generally bifurcate or arborescent, the remaining ones arborescent. Vas deferens - 28.68 ± 1.38. Ratio vas deferens/vergic sac = 6.8±0.8. Verge - 3.08 ± 0.28 mm long, 0.11 ± 0.02 mm wide. Vergic sac - 3.07 ± 0.28 mm long, about 0.20 mm wide. Ratio vergic sac/preputium = 0.84 ± 0.12. Preputium - 3.69 ± 0.47 mm long, 0.85 ± 0.10 mm wide. Albumen gland - Resembling taht of glabratus. Oviduct - 16.26 ± 1.41 mm, swollen at the cephalic end. Uterus - 13.24 ± 1.19 mm. Vagina - 1.70 ± 0.22 mm, swolen at the caudal portion. Spermatheca - 2.78 ± 0.40 mm long, 0.86 ± 0.16 mm wide. Spermathecal duct 1.11 ± 0.20 mm. Radula - 125 to 168 horizontal rows of teeth (mean 153.9 ± 8.4). Radula formula 28-1-28 to 36-1-36 (mean 31.8 ± 1.9). Mode formula 31-1-31. The morphological characteristics of the renal region and shell, and the great body length in the same condition of shell diameter, distinguish A. nigricans from the most related species A. glabratus, giving support to considering it a good species from a txonomic or phenotypic standpoint (morphospecies).

Biomphalaria Tenagophila Guaibensis ssp. n. from Southern Brazil and Uruguay (pulmonata: Planorbidae). I. Morphology

A new subspecies of planorbid snail, biomphalaria tenagophila guaibensis, is described. It has been found along the coastal belt of the Brazilian state of rio grande do Sul and the middle part of Uruguay, from Porto Alegre to Mercedes. It differs from the nominate subspecies, Biomphalaria tenagophila tenagophila, in the appearance of the penial complex (prepuce longer and proportionally slenderer in B. t. guaibensis, shorter and proportionally stouter in b. t. tenagophila), in the ratio between the lengths of the penial sheath and the prepuce, in the ratio between the lengths of the uterine complex and the penial complex, and in a coefficient of difference of 2.44 for the ratio between the penis sheath and prepuce and of 2.02 for the ratio between the uterine complex and penial complex. The shell and the other organs of the genital system are similar in both subspecies. B. t. guaibensis is very similar to Biomphalaria occidentalis Paraense, 1981, but is readily separated from it by the presence of a vaginal pouch, which is lacking in the latter, besides showing highly significant difference in the penis sheath: prepuce and uterine complex: penial complex ratios. Crossbreeding experiments which lend additional support to the recognition of B. t. guaibensis as a subspecies will be reported elsewhere.