Industrial solid waste (whitewash mud) use in forest road pavements

The objective of the present study was to evaluate the effects of industrial solid waste (whitewash mud) on geotechnical properties considering the following engineering parameters: California Bearing Ratio (CBR), Atterberg limits and Permeability test. Seven soil samples derived from Alagoinhas, Bahia - Brazil, were classified by the Transportation Research Board (TRB) system. Two were selected as having a great geotecnical potential classified as A-3 (0) and A-2-4 (0), whitewash mud contents 10%, 15%, 20% and 25% dry weight and medium compaction effort were studied in the laboratory testing program. The results indicated the soil denominated good gravel as being the most promising one, when stabilized with whitewash mud, reaching the best results with the dosage of 20 and 25% of whitewash mud.

Mechanical and water vapor permeability properties of biodegradables films based on methylcellulose, glucomannan, pectin and gelatin

Mimic biological structures such as the cell wall of plant tissues may be an alternative to obtain biodegradable films with improved mechanical and water vapor barrier properties. This study aims to evaluate the mechanical properties and water vapor permeability (WVP) of films produced by using the solvent-casting technique from blended methylcellulose, glucomannan, pectin and gelatin. First, films from polysaccharides at pH 4 were produced. The film with the best mechanical performance (tensile strength = 72.63 MPa; elongation = 9.85%) was obtained from methylcellulose-glucomannan-pectin at ratio 1:4:1, respectively. Then, gelatin was added to this polysaccharide blend and the pH was adjusted to 4, 5 and 6. Results showed significant improvement in WVP when films were made at pH 5 and at polysaccharides/gelatin ratio of 90/10 and 10/90, reaching 0.094 and 0.118 g.mm/h.m².kPa as values, respectively. Films with the best mechanical properties were obtained from the blend of polysaccharides, whereas WVP was improved from the blend of polysaccharides and gelatin at pH 5.

An analysis of the spatiotemporal distribution of American cutaneous leishmaniasis in counties located along road and railway corridors in the State of Maranhao, Brazil

Introduction The incidence of American cutaneous leishmaniasis (ACL) is increasing in Latin America, especially in Brazil, where 256,587 cases were confirmed in the last decade. Methods This study used a Bayesian model to examine the spatial and temporal distribution of ACL cases between 2000 and 2009 in 61 counties of State of Maranhão located along the three main road and railway corridors. Results During the study period, 13,818 cases of ACL were recorded. There was a significant decrease in the incidence of ACL in the ten study years. The recorded incidence rate ranged from 7.36 to 241.45 per 100,000 inhabitants. The relative risk increased in 77% of the counties, decreased in 18% and was maintained in only five counties. Conclusions Although there was a decreased incidence of the disease, ACL was present in all of the examined municipalities, thus maintaining the risk of contracting this illness.

Um esquema geral para a discussão do movimento de materiais para as células vivas e tecidos

A generalized comprehensive scheme concerning the movement of materials into living cells and tissues is presented. It is designed for use by investigators and teachers who, is assumed, have a previous knowledge of the subject as well as familiarity with previously published literature on the subject. Footnotes to figure 2 X = a constituent component material, arising from extermal sources or through metabolism, capable of migration under favorable conditions. e, i, ec, ic, mc = subscripts indicating location. oC = oxidized cytoplasmic constituents specifically concerned in unidirectional (here invardly directed), diffetial translocation of a particular material X. rC = reduced cytoplasmic constituents specifically concerned. XF = specific free energy (2) of a constituent component in in external or internal phases or in cytoplasm. D = diffusion (4). EA = exchange adsorption (4). MA= metabolic accumulation (4), CI = differentially characteristic cytoplasmic interaction (4) between oC and X, determined by the genetic constitution of the biological species. ▬▬▬>= migration, where permeability to the material involved is relatively high; and ~~~~->, where relatively low. <▬▬▬>= chemical reactions. ▬▬▬>= energy changes of X; diffusion is characteristically with the direction in which the concentration or activity of the constituent decreases, exchange adsorption may be with or against the direction of concentration or activity decrease.

The influence of building materials on the residual action of BHC

Residual insecticide activity of BHC vapors from various building materials in controlled humidity chambers in the laboratory were significantly different. Laboratory-reared, first instar nymphs of Dipetalogaster maximus were exposed to vapors of BHC which were being released from the treated surfaces of building materials taken from Mambaí, Goiás.

Diagnostic of Biomphalaria snails and Schistosoma mansoni: DNA obtained from traces of shell organic materials

Freshwater snails belonging to the genus Biomphalaria act as intermediate hosts for the parasite trematode Schistosoma mansoni in Africa and in the neotropical region. Identification of such molluscs is carried out based on morphological characters and the presence of cercariae is verified through squeezing snails between two glass slides or by exposing them to artificial light. However, sometimes, the material collected includes molluscs with decomposed bodies or, yet, only empty shells, which precludes their identification and S. mansoni detection. Due to these difficulties, we have developed a methodology in which DNA may be extracted from traces of organic material from inside shells in order to identify molluscs through polymerase chain reaction and restriction fragment length polymorphism and to detect S. mansoni into these snails, by using low stringency polymerase chain reaction. Species-specific profiles obtained from B. glabrata, B. straminea, and B. tenagophila snails and their shells, maintained in laboratory for ten years, showed the same profiles. S. mansoni profiles showed to be present in shell specimens as far as the eighth week after being removed from aquarium.

Multimedia materials for education, training, and advocacy in international health: experiences with the Schistosomiasis Control Initiative CD-ROM

We describe an innovative use of multimedia materials to support training and advocacy within a schistosomiasis control programme. The Schistosomiasis Control Initiative (SCI) at Imperial College London works with selected sub-Saharan African countries to develop schistosomiasis control programmes. Two elements of the SCI programme were supported by multimedia materials developed at the Wellcome Trust in collaboration with the SCI: (1) training of programme managers, district health officers, and those delivering practical elements of the programme; and (2) advocacy targeted at decision-makers and donors. Evaluation of the materials revealed high reported ratings for both user satisfaction and impact from use of the product. From this experience we draw out several general messages about development of multimedia materials and how these will play a growing future role in promoting training within international health.

The nurse in the management of materials in teaching hospitals

OBJECTIVETo present the nurse's integration within materials management of six teaching hospitals of Paraná - Brazil, and to describe the activities performed by nurses within this process.METHODA study of a qualitative approach and descriptive nature, conducted in teaching hospitals in Paraná, between June and August of 2013. The data collection was conducted through semi-structured interviews with eight nurses who worked in materials management; data were analyzed using content analysis.RESULTSThese showed that nurses perform ten categories of activities, distributed into four of the five steps of the materials management process.CONCLUSIONThe nurse, in performing of these activities, in addition to favoring the development of participative management, contributes to the organization, planning, and the standardization of the hospital supply process, giving greater credibility to the work with professionals who use the materials, and to the suppliers.

Effectiveness of heparin versus 0.9% saline solution in maintaining the permeability of central venous catheters: a systematic review

Abstract OBJECTIVE Determining which is the most effective solution (heparin flush compared to 0.9% saline flush) for reducing the risk of occlusions in central venous catheters (CVC) in adults. METHOD The systematic review followed the principles proposed by the Cochrane Handbook; critical analysis, extraction and synthesis of data were performed by two independent researchers; statistical analysis was performed using the RevMan program 5.2.8. RESULTS Eight randomized controlled trials and one cohort study were included and the results of the meta-analysis showed no difference (RR=0.68, 95% CI=0.41-1.10; p=0.12). Analysis by subgroups showed that there was no difference in fully deployed CVC (RR=1.09, CI 95%=0.53-2.22;p=0.82); Multi-Lumen CVC showed beneficial effects in the heparin group (RR=0.53, CI 95%=0.29-0.95; p=0.03); in Double-Lumen CVC for hemodialysis (RR=1.18, CI 95%=0.08-17.82;p=0.90) and Peripherally inserted CVC (RR=0.14, CI 95%=0.01-2.60; p=0.19) also showed no difference. CONCLUSION Saline solution is sufficient for maintaining patency of the central venous catheter, preventing the risks associated with heparin administration.

Replication of an ivg protocol to estimate bioaccessible arsenic in materials from a gold mining area in Brazil

Tests for bioaccessibility are useful in human health risk assessment. No research data with the objective of determining bioaccessible arsenic (As) in areas affected by gold mining and smelting activities have been published so far in Brazil. Samples were collected from four areas: a private natural land reserve of Cerrado; mine tailings; overburden; and refuse from gold smelting of a mining company in Paracatu, Minas Gerais. The total, bioaccessible and Mehlich-1-extractable As levels were determined. Based on the reproducibility and the accuracy/precision of the in vitro gastrointestinal (IVG) determination method of bioaccessible As in the reference material NIST 2710, it was concluded that this procedure is adequate to determine bioaccessible As in soil and tailing samples from gold mining areas in Brazil. All samples from the studied mining area contained low percentages of bioaccessible As.

PEASANT AND SCIENTIFIC KNOWLEDGE ON PLANOSOLS AS A SOURCE OF MATERIALS IN THE MAKING OF NON-INDUSTRIAL POTTERY

Ethnopedological studies have mainly focused on agricultural land uses and associated practices. Nevertheless, peasant and indigenous populations use soil and land resources for a number of additional purposes, including pottery. In the present study, we describe and analyze folk knowledge related to the use of soils in non-industrial pottery making by peasant potters, in the municipality of Altinho, Pernambuco State, semiarid region at Brazil. Ethnoscientific techniques were used to record local knowledge, with an emphasis on describing the soil materials recognized by the potters, the properties they used to identify those soil materials, and the criteria employed by them to differentiate and relate such materials. The potters recognized three categories of soil materials: “terra” (earth), “barro” (clay) and, “piçarro” (soft rock). The multi-layered arrangement of these materials within the soil profiles was similar to the arrangement of the soil horizon described by formal pedologists. “Barro vermelho” (red clay) was considered by potters as the principal ceramic resource. The potters followed morphological and utilitarian criteria in distinguishing the different soil materials. Soils from all of these sites were sodium-affected Alfisols and correspond to Typic Albaqualf and Typic Natraqualf in the Soil Taxonomy (Soil Survey Staff, 2010).

Ostwald ripening in porous materials

The process of coarsening of an ensemble of clusters is investigated for the case that elastic strains due to matrix - cluster interactions change the process qualitatively as compared with dependencies established theoretically first by Lifshitz and Slezov. Such a qualitatively different behavior occurs always when the energy of elastic deformation in cluster growth increases more rapidly than linear with the volume of a cluster. Analytic solutions, for limiting cases, as well as numerical solutions, for the general case of coarsening in an ensemble of pores with a given pore size distribution, are presented. Possible applications are discussed.

The chemistry involved in the steam treatment of lignocellulosic materials

Pretreatment of lignocellulosic materials is essential for bioconversion because of the various physical and chemical barriers that greatly inhibit their susceptibility to bioprocesses such as hydrolysis and fermentation. The aim of this article is to review some of the most important pretreatment methods developed to date to enhance the conversion of lignocellulosics. Steam explosion, which precludes the treatment of biomass with high-pressure steam under optimal conditions, is presented as the pretreatment method of choice and its mode of action on lignocellulosics is discussed. The optimal pretreatment conditions for a given plant biomass are defined as those in which the best substrate for hydrolysis is obtained with the least amount of soluble sugars lost to side reactions such as dehydration. Therefore, pretreatment optimization results from a compromise between two opposite trends because hemicellulose recovery in acid hydrolysates can only be maximized at lower pretreatment severities, whereas the development of substrate accessibility requires more drastic pretreatment conditions in which sugar losses are inevitable. To account for this heterogeneity, the importance of several process-oriented parameters is discussed in detail, such as the pretreatment temperature, residence time into the steam reactor, use of an acid catalyst, susceptibility of the pretreated biomass to bioconversion, and process design.