Alternativas analíticas para determinação de ferro e titânio em cimento Portland

In the present work four different analytical methodologies were studied for the determination of iron and titanium in Portland cement. The cement samples were dissolved with hot HCl and HF, being compared Fe and Ti concentrations through four analytical methods: molecular absorption spectrophotometry using the reagents 1,2-hydroxybenzene-3,5-disulfonic acid (Tiron) and the 5-chloro-salicylic acid (CSA), inductively coupled plasma atomic emission spectrometry (ICP-AES) and flame atomic absorption spectrophotometry (FAAS). In the spectrophotometric determinations were studied pH conditions, reagents addition order, interferences, amount of reagents, linear range and stability of the system. In the techniques of ICP-AES and FAAS were studied the best lines, interferences, sensibility and linear range. The obtained results were compared and the agreement was evaluated among the methods for the determination of the metals of interest.

Uso de lodo de estação de tratamento de água centrifugado em matriz de concreto de cimento portland para reduzir o impacto ambiental

An alternative application of the humid sludge from the Passaúna WTP, located in Curitiba's metropolitan area, is proposed for concrete structures, partially replacing aggregates and cement. For the investigation, a reference concrete and four concrete mixtures with sludge were produced, and from these, two mixtures, containing 4% and 8% of sludge (m/m), were analyzed by different techniques: X ray fluorescence, X ray diffraction, thermo-gravimetric analysis, physicochemical analysis, compressive strength, etc. The properties were evaluated and the results indicate that the mixtures can be applied in different situations as cast structures for construction of concrete walls. Mixtures with more than 4% of sludge are restricted to applications where the workability of the concrete is not required, such as for residential pavements, sidewalks and stepping floors.

Desempenho físico-químico e mecânico de concreto de cimento Portland com borracha de estireno-butadieno reciclada de pneus

Physicochemical and mechanical techniques were carried out to characterize three concrete tyre-rubber waste dosages such as 5, 10 and 15%, w/w. The elastomeric material was identified as styrene-butadiene rubber (SBR). It was observed that the growing SBR content in the mixture decreased the concrete performance. The best results were presented by 5% w/w tyre-rubber waste concrete sample. This composition was tested at Mourão hydroelectric powerplant spillway as repairing material.

Biofouling e biodeterioração química de argamassa de cimento portland em reservatório de usina hidroelétrica

Last decade Brazilian rivers experimented progressive biofouling of Limnoperna fortunei communities and Cordylophora caspia hydroids. The microhabitat is so favorable that in around 1.5 years L. fortunei increased from 0.39 to nearby 149,000 units/m². Ten Portland cement mortar samples were produced with 1: 3.5: 0.4 dosages and installed for 1 year at Salto Caxias Brazilian Power Plant reservoir in 0.5 m and 1.0 m deep to investigate the biofouling influence on hydraulic civil structures. SEM, EDS, visual investigation and XRF results indicate none direct chemical interrelationships between L. fortunei and the mortar samples. However C. caspia diminished the mortar surface resistance and caused cement paste leaching.

Efeito da adição de serragem de couro tratada quimicamente nas propriedades do cimento Portland

The sheave leather was subjected to chemical treatment in an attempt to immobilize chromium ion in a matrix of cement. Cementitious pastes were obtained by adding different proportions of waste treated solutions (5 and 10% compared to the cement mass) and the pH and setting time (hardening) were measured. Aiming to check the leather influence in Portland cement pastes, the phases formation were observed by X-ray diffraction (XRD). The results showed that the pretreatment was effective for the waste dissolution and the pH of treated waste chemical solutions did not influence significantly the characteristics of cement paste, with a slight increase in setting time results.

Method for determining the photocatalytic potential of portland cement mortar containing TiO2 for decomposing the pollutant nitrogen monoxide

Photocatalytic materials can minimize atmospheric pollution by decomposing certain organic and inorganic pollutants using sunlight as an energy source. In this paper, the development of a methodology to measure the photocatalytic potential of mortar containing TiO2 nanoparticles is reported. The results indicate that up to 40% of NOx can be degraded by Portland cement mortar containing 30-50% of TiO2, which validates the method developed for evaluating the photocatalytic potential of materials.

OBTENÇÃO DE COMPÓSITOS HÍBRIDOS BASEADOS EM HIDROGÉIS E CIMENTO PORTLAND

In this study, a novel hybrid composite based on biodegradable hydrogel and Portland cement with promising technological properties was reported. In the first step, a full 23 with central point factorial design was utilized to obtain the enhanced polyacrylamide-carboxymethylcellulose hydrogel compositions. A mathematical model was devised, indicating that the 3 main variables were significant and the AAm and MBAAm variables positively contributed to the mode and showing that the CMC variable had the opposite contribution. In the second step, these compositions were mixed with Portland cement to obtain the hybrid composites. The presence of cement improved the mechanical properties of polymeric matrices, and electronic microscopic micrographics revealed that the hydrogels were well adhered to the cement phase and no phase separation between hydrogel and cement was detected. Finally, using the energy dispersive X-ray technique, the elements Na, Mg, Al, Si, S, K, Ca and Fe were detected in the polymeric matrix, consistent with the hybrid composite formation.

Avaliação dos efeitos de pré-tratamentos da madeira de Eucalyptus benthamii Maiden & Cambage no grau de compatibilidade com cimento Portland

O objetivo deste trabalho foi avaliar o efeito de cinco diferentes tipos de pré-tratamento na compatibilidade entre a madeira do Eucalyptus benthamii e o cimento Portland. A madeira foi pré-tratada com água fria, água quente, hidróxido de sódio, cloreto de cálcio ou hidróxido de cálcio. O grau de compatibilidade foi determinado através do estudo do calor de hidratação nas primeiras 24 h e pela resistência à compressão axial após 28 dias dos compósitos formados por cimento e pó de madeira na relação de peso de 13,3:1. A resistência à compressão axial após 28 dias também foi avaliada em compósitos formados com cimento e partículas de madeira na relação 2,75:1. Os resultados dos testes feitos com a madeira em pó indicaram que a adição de 3% de cloreto de cálcio é o tratamento mais eficiente para reduzir a capacidade de inibição da espécie, enquanto o tratamento do pó da madeira com hidróxido de cálcio afetou negativamente a compatibilidade. Entretanto, a combinação do aditivo cloreto de cálcio com partículas carbonatadas, pelo tratamento com hidróxido de cálcio, foi o que apresentou a maior resistência à compressão axial nos compósitos feitos na relação cimento:madeira de 2,75:1. A madeira de Eucalyptus benthamii apresentou potencial para a fabricação de painéis madeira-cimento. O uso da metodologia de carbonatação das partículas em solução de hidróxido de cálcio também é viável como pré-tratamento, independentemente dos resultados apontados pelos métodos tradicionais de medição do grau de compatibilidade.

Caracterização física e mecânica de argamassas à base de cimento Portland e cinza de casca de arroz residual

A casca de arroz, utilizada como fonte de energia em indústrias de beneficiamento de arroz, converte-se, depois da queima, em uma cinza residual. Esse resíduo, ainda sem um destino adequado, é muitas vezes depositado em grandes áreas abertas e provoca elevado impacto ambiental. Este trabalho teve como objetivo avaliar a viabilidade de utilização da cinza de casca de arroz (CCA) residual na produção de argamassas, como substituta parcial do cimento. A caracterização da CCA foi realizada por meio da análise de fluorescência de raios-X (composição química), análise do teor de carbono e difração de raios-X; também foi realizada análise granulométrica a laser. Os corpos de prova foram submetidos a dois tipos de exposição: ambientes externo e interno, com duração máxima de cinco meses. Foram realizados os ensaios de resistência à compressão simples e não destrutivo (velocidade do pulso ultrassônico - VPU). Embora as argamassas tenham apresentado bom desempenho mecânico, os ensaios de pozolanicidade indicaram que a cinza de casca de arroz residual utilizada não é uma pozolana, mas pode ser utilizada em matrizes cimentícias como material inerte (filler).

Analysis of proteins from membrane and soluble fractions of Giardia duodenalis trophozoites of two Brazilian axenic strains

In the present study, we have analyzed by sodium docecyl sulphate - polyacrilamide gel electrophoresis (SDS-PAGE), immunoblotting and Concanavalin A blotting (Con A blotting) proteins of membrane fractions and soluble fractions obtained from Giardia duodenalis trophozoites of two axenic strains isolated in Brazil from a symptomatic (BTU-11) and an asymptomatic patient (BTU-10), as compared to the reference strain Portland 1. Both Brazilian strains showed a complex and homogeneous electrophoretic pattern of proteins, but some differences could be observed. Several glycoproteins were detected, particularly the proteins of 81, 72, 59 kDa and the protein of 62 kDa in the membrane proteins and cytosol, respectively. Many antigenic components were revealed by anti-Giardia rabbit IgG antibodies in the immunoblotting analysis. Among these components, the membrane protein of 32 kDa and the cytosol protein of 30 kDa could be related to giardin, as previously demonstrated.

Clonal types and antimicrobial resistance profiles of methicillin-resistant Staphylococcus aureus isolates from hospitals in south Brazil

In the present study were evaluated the DNA macrorestriction profile and SCCmec types for nine multi-resistant MRSA selected. Also antimicrobial susceptibility testing by disk diffusion method was evaluated for 68 MRSA isolates against 12 antimicrobial agents. The isolates were recovered from blood culture collected from hospitalized patients in three hospitals of Porto Alegre, Brazil. PFGE and PCR for mecA and SCCmec I, II, III, IV types genes were done on selected nine isolates with susceptibility only to vancomycin, teicoplanin and linezolid. Two clone profiles, with five subtypes, were demonstrated among multi-resistant MRSA analyzed. Eight isolates showed harbor SCCmec type III and one isolate was not typeable. The knowledge of SCCmec type, clone and antimicrobial profiles among S. aureus is essential mainly to prevention and control of dissemination of the antimicrobial resistance.

Cryptococcus neoformans isolation from swallow (Hirundo rustica) excreta in Iran

Cryptococcus neoformans is an encapsulated yeast that can cause cryptococcosis, a life-threatening infection that mainly occurs in immunocompromised patients. The major environmental sources of C. neoformans have been shown to be soil contaminated with avian droppings. In the present study, we evaluated the isolation of C. neoformans from swallow (Hirundo rustica) excreta in two northern cities of Iran. Ninety-seven swallow droppings were evaluated and 498 yeast-like colonies were isolated and identified as Rhodotorula spp. (62.8%), Candida spp. (28.5%)and C. neoformans (8.7%). Cryptococcus neoformans was isolated from 5/97 (5.2%) of collected samples. Min-Max colony forming units (CFU) per one gram for the positive samples were 3-10 C. neoformans colonies. The total mean CFU per one gram for the positive samples was 4.8. The results of this study demonstrate that excreta of swallow may harbor different species of potentially pathogenic yeasts, mainly C. neoformans, and may be capable of disseminating these fungi in the environment.

ANTIMICROBIAL DRUG RESISTANCE IN STRAINS OF Escherichia coli ISOLATED FROM FOOD SOURCES

A variety of foods and environmental sources harbor bacteria that are resistant to one or more antimicrobial drugs used in medicine and agriculture. Antibiotic resistance in Escherichia coli is of particular concern because it is the most common Gram-negative pathogen in humans. Hence this study was conducted to determine the antibiotic sensitivity pattern of E. coli isolated from different types of food items collected randomly from twelve localities of Hyderabad, India. A total of 150 samples comprising; vegetable salad, raw egg-surface, raw chicken, unpasteurized milk, and raw meat were processed microbiologically to isolate E. coli and to study their antibiotic susceptibility pattern by the Kirby-Bauer method. The highest percentages of drug resistance in isolates of E. coli were detected from raw chicken (23.3%) followed by vegetable salad (20%), raw meat (13.3%), raw egg-surface (10%) and unpasteurized milk (6.7%). The overall incidence of drug resistant E. coli was 14.7%. A total of six (4%) Extended Spectrum β-Lactamase (ESBL) producers were detected, two each from vegetable salads and raw chicken, and one each from raw egg-surface and raw meat. Multidrug resistant strains of E. coli are a matter of concern as resistance genes are easily transferable to other strains. Pathogen cycling through food is very common and might pose a potential health risk to the consumer. Therefore, in order to avoid this, good hygienic practices are necessary in the abattoirs to prevent contamination of cattle and poultry products with intestinal content as well as forbidding the use of untreated sewage in irrigating vegetables.

Trypanosoma cruzi in marsupial didelphids (Philander frenata and Didelhis marsupialis): differences in the humoral immune response in natural and experimental infections

Philander frenata and Didelphis marsupialis harbor parasitism by Trypanosoma cruzi without developing any apparent disease and on the contrary to D. marsupialis, P. frenata maintains parasitism by T. cruzi II subpopulations. Here we compared the humoral immune response of the two didelphids naturally and experimentally infected with T. cruzi II group, employing SDS-PAGE/Western blot techniques and by an Indirect immunofluorescence assay. We also studied the histopathological pattern of naturally and experimentally infected P. frenata with T. cruzi. P. frenata sera recognized more antigens than D. marsupialis, and the recognition pattern did not show any change over the course of the follow up of both didelphid species. Polypeptides of 66 and 90kDa were the most prominent antigens recognized by both species in the soluble and enriched membrane fractions. P. frenata recognized intensely also a 45kDa antigen. Our findings indicate that: 1) there were no quantitative or qualitative differences in the patent or subpatent phases in the recognition pattern of P. frenata; 2) the significant differences in the recognition pattern of parasitic antigens by P. frenata and D. marsupialis sera suggest that they probably "learned" to live in harmony with T. cruzi by different strategies; 3) although P. frenata do not display apparent disease, tissular lesions tended to be more severe than has been described in D. marsupialis; and 4) Both didelphids probably acquired infection by T. cruzi after their evolutionary divergence.