34 resultados para Optimal placement of sensors
em Scielo Saúde Pública - SP
Resumo:
Existing studies on global sourcing strategy have implicitly adopted a cJosed-systems perspective in which sourcing activities are managed within a multinational company across national boundaries. Produd and process innovations and components procurement that are jointly managed by a consortium of cooperating firms have not been examined. In this paper, we empiricallyexamine the issues concerning sourcing partnerships in an open-systems perspective. Findings suggest that even in a sourcing partnership arrangement with a foreign supplier, the principal firm's ability to procure and control the supply of major components has a positive bearing on its market performance.
Resumo:
PURPOSE: To analyze the results from using endovascular techniques to place long-term chemotherapy catheters when advancing the catheter using the external jugular vein is difficult due to obstructions or kinking. METHODS: Between July 1997 and August 2000, 320 long-term chemotherapy catheters were placed, and in 220 cases the external jugular vein was used as the primary venous approach. In 18 of these patients, correct positioning was not achieved and several endovascular techniques were then utilized to overcome these obstacles, including manipulation of a J-wire with a moveable core, venography, and the exchange wire technique. RESULTS: In 94.5% of the patients with difficulties in obtaining the correct positioning, we were able to advance the long-term catheter to the desired position with the assistance of endovascular techniques. CONCLUSIONS: Venography and endovascular guidance techniques are useful for the placement of long-term catheters in the external jugular vein.
Resumo:
A localização do superfosfato (marcado com P32) no maracujá em produção foi estudada em condições de plantação comercial. Verificou-se que as aplicações em sulcos circulares ou faixas superficiais ao redor da planta tem eficiência equivalente sendo esses métodos três vezes superiores à localização do adubo em furos no solo. A pulverização foliar, por sua vez, mostrou-se 20 vezes mais eficiente que a aplicação no solo de acordo com os dois primeiros métodos.
Resumo:
1. Tagged superphosphate was applied to 2.5 year old passion fruit plants from a commercial plantation established in a sandy loam. 2. 100 grams of the fertilizer were distributed in the following ways: in a circular furrow 20 cm around the plant 40 cm from the stems; in a circular strip 10 cm wide, 40 cm from the stems; in six holes around the plants, 40 cm from the stems 20 cm deep, 2.5 cm in diameter. 3. 10 grams of the fertilizer in 11 of water were sprayed to the leaves. 4. Three weeks after the treatments were made, leaf samples were taken for analysis. 5. Determinations of specific activities both in the leaves and in the fertilizer used have shown that R in the plant was derived from the superphosphate in the following relative proportions (by making the first treatment equal to 100): circular furrow = 100; circular strip = 120; holes = 30; foliar spray = 230.
Resumo:
The study of the type material of Chironomus (Polypedilum) griseistriatum Edwards, 1931 described from Patagonia lead us to formally transfer the species to Apedilum Townes, 1945 as a new combination, and a reared specimen allows us to describe its pupa. Based on several larvae belonging to Apedilum collected in the proximity of the localities in which the adults and pupae were found, we tentatively describe the larval stage. Subfossil larval head capsules of the same species were found in Laguna Stibnite at 46°S in Chile dated to about 2,500 years ago and in Puerto Blest, Lago Nahuel Huapi at 41°S in Argentina dated about 2,000 years ago. We discuss the habitat of the species based on both modern and subfossil material. Identification keys to male adult, pupae and fourth instar larvae are also provided.
Resumo:
The correct use of closed field chambers to determine N2O emissions requires defining the time of day that best represents the daily mean N2O flux. A short-term field experiment was carried out on a Mollisol soil, on which annual crops were grown under no-till management in the Pampa Ondulada of Argentina. The N2O emission rates were measured every 3 h for three consecutive days. Fluxes ranged from 62.58 to 145.99 ∝g N-N2O m-2 h-1 (average of five field chambers) and were negatively related (R² = 0.34, p < 0.01) to topsoil temperature (14 - 20 ºC). N2O emission rates measured between 9:00 and 12:00 am presented a high relationship to daily mean N2O flux (R² = 0.87, p < 0.01), showing that, in the study region, sampling in the mornings is preferable for GHG.
Resumo:
Abstract: The objective of this work was to identify polymorphic simple sequence repeat (SSR) markers for varietal identification of cotton and evaluation of the genetic distance among the varieties. Initially, 92 SSR markers were genotyped in 20 Brazilian cotton cultivars. Of this total, 38 loci were polymorphic, two of which were amplified by one primer pair; the mean number of alleles per locus was 2.2. The values of polymorphic information content (PIC) and discrimination power (DP) were, on average, 0.374 and 0.433, respectively. The mean genetic distance was 0.397 (minimum of 0.092 and maximum of 0.641). A panel of 96 varieties originating from different regions of the world was assessed by 21 polymorphic loci derived from 17 selected primer pairs. Among these varieties, the mean genetic distance was 0.387 (minimum of 0 and maximum of 0.786). The dendrograms generated by the unweighted pair group method with arithmetic average (UPGMA) did not reflect the regions of Brazil (20 genotypes) or around the world (96 genotypes), where the varieties or lines were selected. Bootstrap resampling shows that genotype identification is viable with 19 loci. The polymorphic markers evaluated are useful to perform varietal identification in a large panel of cotton varieties and may be applied in studies of the species diversity.
Resumo:
In recent years the analysis and synthesis of (mechanical) control systems in descriptor form has been established. This general description of dynamical systems is important for many applications in mechanics and mechatronics, in electrical and electronic engineering, and in chemical engineering as well. This contribution deals with linear mechanical descriptor systems and its control design with respect to a quadratic performance criterion. Here, the notion of properness plays an important role whether the standard Riccati approach can be applied as usual or not. Properness and non-properness distinguish between the cases if the descriptor system is exclusively governed by the control input or by its higher-order time-derivatives additionally. In the unusual case of non-proper systems a quite different problem of optimal control design has to be considered. Both cases will be solved completely.
Resumo:
In this paper, the optimum design of 3R manipulators is formulated and solved by using an algebraic formulation of workspace boundary. A manipulator design can be approached as a problem of optimization, in which the objective functions are the size of the manipulator and workspace volume; and the constrains can be given as a prescribed workspace volume. The numerical solution of the optimization problem is investigated by using two different numerical techniques, namely, sequential quadratic programming and simulated annealing. Numerical examples illustrate a design procedure and show the efficiency of the proposed algorithms.
Resumo:
The optimal dose of nitrogen (N) in potato crop depends on the production system. The objective of this study was to determine the optimal dose of N for the production of basic potato seed minitubers and evaluate the effect of N rates on physiological and nitrogen indices in the youngest fully developed leaf (fourth leaf) and in the oldest leaf of the plants at 60 days after planting. The experiment was conducted in a greenhouse at the Departamento de Fitotecnia da Universidade Federal de Viçosa. The treatments consisted of five N rates (0, 45, 90, 180 and 360 mg dm-3), with 10% of each dose applied at planting and the remainder through irrigation water, daily, for 30 days. The nitrogen rates positively influenced the physiological indices (length, width, leaf area, number of leaves, fresh mass and dry mass) and nitrogen (level and content of N and N-NO³ in the dry mass and SPAD) both in the fourth leaf and in the oldest leaf. Likewise, the N rates positively influenced the number and mass of harvested tubers. The largest number (5.44 tubers/plant) and the maximum mass of tubers (243.5 g/plant) were obtained with 360.0 and 332.9 mg N dm-3, respectively. Therefore, the mass and number of tubers were not optimized by the same N rate. The critical SPAD index was 38.8 in the fourth leaf, which was more sensitive to the effect of N rates than the oldest leaf.
Resumo:
In recent years, attacks by piranhas have become a common problem in dammed portions of rivers and streams in the State of Sao Paulo, Southeastern Brazil. In two outbreaks recorded in two neighboring counties in the Northwest region of the state, 74 bathers were bitten. Only one bite per person was recorded during a short period of the year. The bites were related to parental care and/or defense of spawning territory, which confirms previous studies and demystify the attacks by these legendary fish, as they are perceived by most people. Placement of fine mesh nets and removal of aquatic vegetation stopped the attacks.
Resumo:
Stressed plants are generally more attacked by galling insects. In this study we investigated the relationship between population abundance and species richness of galling insects on the tree Alchornea castaneaefolia A. JUSS. (Euphorbiaceae), submited to stress induced by the hemiparasite Psittacanthus sp. (Loranthaceae) in the Amazon, Brazil. Branches of A. castaneaefolia attacked by the hemiparasite were more heavily infested by galling insects than non-attacked branches. The field observations partially corroborate the hypothesis that there would be an optimal level of host-plant stress for galling insect establishment.
Resumo:
OBJECTIVE: To report the role played by transesophageal echocardiography during implantation of self-expanding aortic endoprostheses (stent) at a hemodynamics laboratory. METHODS: Thirteen patients underwent stent implantation in the descending thoracic aorta with the aid of transesophageal echocardiography during the entire procedure. Indications for stenting were as follows: 8 aortic dissections, 2 true aneurysms, 2 penetrating atherosclerotic ulcers, and 1 traumatic pseudoaneurysm. RESULTS: No complications resulting from the use of transesophageal echocardiography were observed. In 12 patients, the initial result was considered appropriate, with total or partial resolution of the major lesion confirmed by a posterior examination. In 1 patient, the procedure was suspended after transesophageal echocardiography and angiography showed that the proximal aortic diameter was inappropriate. Transesophageal echocardiography contributed to clarifying relevant points, such as aortic diameter, anatomic detail of the intimal lesion, and location and size of the communicating orifice. In addition, it facilitated placing the stent in the target lesion, reduced the time of exposure to radiation and the use of contrast medium, and provided rapid identification of intercurrent events, possibly reducing the total duration of the procedure. CONCLUSION: The use of transesophageal echocardiography during placement of aortic stents seems appropriate. The actual advantages of the procedure will be defined in a comparative prospective study.
Resumo:
A study of the Adolpho Lutz Collection of Tabanidae at the Instituto Oswaldo Cruz and of additional Lutz material at the Instituto Butantan in São Paulo is reported. Of the ninety-four species of Tabanidae validly described by Lutz, type material of eighty-four was recognized, either holotypes, allotypes or syntypes. Lectotypes were selected from among syntype series or remaining specimens and all type material was labelled. Of the ten species of which no type material could be found, neotypes were designated in the case of two species, Erephosis nigricans and Erephosis pseudo-aurimaculata. Types of three species, Chrysops ecuadoriensis, Dichelacera salvadorensis and Esenbeckia nigricorpus are believed to have been in Hamburg and destroyed during the last war. Types of two species, Esenbeckia biscutellata and E. dubia, and additional type material of several others are believed to have been in Montevideo. A request for information about them remains unanswered. Types of the remaining three species, Dichelacera intermedia, Dichelacera laceriascia and Esenbeckia distinguenda could not be found, and it is believed that at least the type of the last species was accidentally destroyed. Three specific of subspecific names proposed by Lutz but palaced by others in synonymy have been revalidated, Acanthocera intermedia, Erephosis brevistria and Esenbeckia fenestrata. Generic placement of two names has been changed, Esenbeckia arcuata ricardoae to Proboscoides, and Selasoma giganteum to Stibasoma. Seven specific names proposed by Lutz appear to be synonyms of earlier names, as follows: Bombylopsis juxtaleonina Lutz and Castro, 1936 = B. leonina Lutz, 1909. Bombylopsis pseudoanalis Lutz, 1909 = B. erythronotata (Bigot, 1892). Esenbeckia fuscipennis var. flavescens Lutz, 1909 = Esenbeckia fuscipennis Wied., 1828. Fidena chrysopyga Lutz and Castro, 1936 = F. atra Lutz and Castro, 1936. Laphriomyia longipalpis Lutz and Castro, 1937 = L. mirabilis Lutz, 1911. Stibasoma semiflavum Lutz, 1915 = St. bicolor Bigot, 1892. Tabanus hesperus Lutz, 1912 = Chlorotabanus (Cryptolylus) innotescens (Walker, 1854). Four Lutz names appear to antedate names proposed by others, viz.: Diachlorus angustifrons Kröber, 1930 and D. ochraceus Kröb., 1928 not Macquart, 1850 = Diachlorus fuscistigma Lutz, 1913. Psalidia fairchildi Barretto, 1950 = dicladocera conspicua Lutz and Neiva, 1914. Fidena pseudo-fulvithorax Kröb., 1931 = Erephopsis flavicrinis Lutz, 1909. Esenbeckia lemniscata Enderlein, 1925 = Esenbeckia clari Lutz, 1909. Some comments on Lutz' system of classification are given together with notes on the genotypes and included species of his genera as revaled by his collection and notes.
Resumo:
The molecular karyotypes for 20 reference strais of species complexes of Leishmania were determined by contour-clamped homogeneous eletric field (CHEF) electrosphoresis. Determination of number/position of chromosome-sized bands and chromosomal DNA locations of house-keeping genes were the two criteria used for differentiating and classifying the Leishmania species. We have established two gel running conditions of optimal separation of chromosomes, wich resolved DNA molecules as large as 2,500 kilobase pairs (kb). Chromosomes were polymorphic in number (22-30) and size (200-2,500 kb) of bands among members of five complexes of Leishmania. Although each stock had a distinct karyotype, in general the differences found between strains and/or species within each complex were not clear enough for parasite identification. However, each group showed a specific number of size-concordant DNA molecules, wich allowed distinction among the Leishmania complex parasites. Clear differences between the Old and New world groups of parasites or among some New World Leishmania species were also apparent in relation to the chromosome locations of beta-tubulin genes. Based on these results as well as data from other published studies the potencial of using DNA karyotype for identifying and classifying leishmanial field isolates is discussed.