Turbulent heat transfer and pressure drop in pinned annular regions

Experiments were performed to determine average heat transfer coefficients and friction factors for turbulent flow through annular ducts with pin fins. The measurements were carried out by means of a double-pipe heat exchanger. The total number of pins attached to the inner wall of the annular region was 560. The working fluids were air, flowing in the annular channel, and water through the inner circular tube. The average heat transfer coefficients of the pinned air-side were obtained from the experimental determination of the overall heat transfer coefficients of the heat exchanger and from the knowledge of the average heat transfer coefficients of the circular pipe (water-side), which could be found in the pertinent literature. To attain fully developed conditions, the heat exchanger was built with additional lengths before and after the test section. The inner circular duct of the heat exchanger and the pin fins were made of brass. Due to the high thermal conductivity of the brass, the small tube thickness and water temperature variation, the surface of the internal tube was practically isothermal. The external tube was made of an industrial plastic which was insulated from the environment by means of a glass wool batt. In this manner, the outer surface of the annular channel can be considered adiabatic. The results are presented in dimensionless forms, in terms of average Nusselt numbers and friction factors as functions of the flow Reynolds number, ranging from 13,000 to 80,000. The pin fin efficiency, which depends on the heat transfer coefficient, is also determined as a function of dimensionless parameters. A comparison of the present results with those for smooth sections (without pins) is also presented. The purpose of such a comparison is to study the influence of the presence of the pins on the pressure drop and heat transfer rate.

Comparison between one-dimensional uncoupled and convection-conduction conjugated approaches in finned surface heat transfer

This work studies the forced convection problem in internal flow between concentric annular ducts, with radial fins at the internal tube surface. The finned surface heat transfer is analyzed by two different approaches. In the first one, it is assumed one-dimensional heat conduction along the internal tube wall and fins, with the convection heat transfer coefficient being a known parameter, determined by an uncoupled solution. In the other way, named conjugated approach, the mathematical model (continuity, momentum, energy and K-epsilon equations) applied to tube annuli problem was numerically solved using finite element technique in a coupled formulation. At first time, a comparison was made between results obtained for the conjugated problem and experimental data, showing good agreement. Then, the temperature profiles under these two approaches were compared to each other to analyze the validity of the one-dimensional classical formulation that has been utilized in the heat exchanger design.

Changes in guava (Psidium guajava L. var. Paluma) nectar volatile compounds concentration due to thermal processing and storage

Guava nectars were formulated for approximately 10, 12, or 14 ºBrix, with 40% guava pulp. Sodium benzoate, 500 mg.kg-1 was used as preservative. The Brix value was adjusted with saturated sucrose syrup. The guava nectar was pasteurized (85 ºC/42 seconds) in tubular heat exchanger and then hot filled in 500 mL white glass bottles. The products were stored either at room temperature (25 ± 5 ºC) or refrigerated (5 ± 2 ºC) under fluorescent light exposure and analyzed on the day after processing (time zero) and also 40, 80, and 120 days of storage. Eight compounds were identified and quantified by Gas Chromatography (GC) -Mass Spectrometry (MS): hexanal, (E)-hex-2-enal, 1-hexenol, (Z)-hex-3-enol, (Z)-hex-3-enyl acetate, phenyl-3-propyl acetate, cinnamyl acetate, and acetic acid. There was no significant effect of thermal treatment on the volatile compound concentrations, except for a significant decrease (p = 0.0001) in hexanal and (Z)-hex-3-enyl acetate (p = 0.0029). As for the storage time, there was a much greater decrease in the esters contents, such as (Z)-hex-3-enyl and phenyl-3-propyl acetates. Cinnamyl acetate had the greatest decrease over storage time. Refrigeration was better than room temperature for guava nectar volatile compounds stability over storage time, mainly for esters compounds, which are important for the product aroma and flavor

Use of the heat dissipation method for sap flow measurement in citrus nursery trees1

Sap flow could be used as physiological parameter to assist irrigation of screen house citrus nursery trees by continuous water consumption estimation. Herein we report a first set of results indicating the potential use of the heat dissipation method for sap flow measurement in containerized citrus nursery trees. 'Valencia' sweet orange [Citrus sinensis (L.) Osbeck] budded on 'Rangpur' lime (Citrus limonia Osbeck) was evaluated for 30 days during summer. Heat dissipation probes and thermocouple sensors were constructed with low-cost and easily available materials in order to improve accessibility of the method. Sap flow showed high correlation to air temperature inside the screen house. However, errors due to natural thermal gradient and plant tissue injuries affected measurement precision. Transpiration estimated by sap flow measurement was four times higher than gravimetric measurement. Improved micro-probes, adequate method calibration, and non-toxic insulating materials should be further investigated.

Effect of heat and moisture exchangers on the prevention of ventilator-associated pneumonia in critically ill patients

Ventilator-associated pneumonia (VAP) remains one of the major causes of infection in the intensive care unit (ICU) and is associated with the length of hospital stay, duration of mechanical ventilation, and use of broad-spectrum antibiotics. We compared the frequency of VAP 10 months prior to (pre-intervention group) and 13 months after (post-intervention group) initiation of the use of a heat and moisture exchanger (HME) filter. This is a study with prospective before-and-after design performed in the ICU in a tertiary university hospital. Three hundred and fourteen patients were admitted to the ICU under mechanical ventilation, 168 of whom were included in group HH (heated humidifier) and 146 in group HME. The frequency of VAP per 1000 ventilator-days was similar for both the HH and HME groups (18.7 vs 17.4, respectively; P = 0.97). Duration of mechanical ventilation (11 vs 12 days, respectively; P = 0.48) and length of ICU stay (11 vs 12 days, respectively; P = 0.39) did not differ between the HH and HME groups. The chance of developing VAP was higher in patients with a longer ICU stay and longer duration of mechanical ventilation. This finding was similar when adjusted for the use of HME. The use of HME in intensive care did not reduce the incidence of VAP, the duration of mechanical ventilation, or the length of stay in the ICU in the study population.

Heat shock and salicylic acid on postharvest preservation of organic strawberries

Heat shock and salicylic acid have been studied on shelf-life extension of fruits. The benefits of these techniques have been related to their effect on inducing physiological defense responses against the oxidative stress and pathogen development. The objective of this study was to evaluate the effect of heat shock and salicylic acid on the postharvest preservation and contents of total phenolics, anthocyanins, ascorbic acid, fresh weight loss and microbiological quality of organic strawberries cv. Dover. Strawberries produced organically and stored at 5 ºC were subjected to heat shock (45 ºC ± 3 ºC for 3 h), application of salicylic acid (soaking in 2.0 mmol L-1 solution), heat shock in combination with salicylic acid and control. After treatment, the fruits were packed and stored in a climatic chamber at 5 ºC ± 2 ºC. At 1, 7 and 14 days, the experimental units were removed from refrigeration and kept at room temperature of approximately 20 ºC for two days. There was no effect of treatments on fresh weight loss, incidence of pathogens or chemical variations in strawberry fruits during the storage period. In natural conditions, organically grown strawberries remained in good condition for sale up to seven days of storage in all treatments.

Characterization of heat tolerance in wheat cultivars and effects on production components

Abstract: There is a need for heat tolerant wheat cultivars adapted to the expansion of cultivation areas in warmer regions due to the high demand of this cereal for human consumption. The objective of this study was to evaluate the effect of high temperatures on grain yield and yield components of wheat and characterize heat tolerant wheat genotypes at different development stages. The genotypes were evaluated in the field with and without heat stress. High temperatures reduced the number of spikelets per spike (21%), number of grains per spike (39%), number of grains per spikelet (23%), 1000-grain weight (27%) and grain yield (79%). Cultivars MGS 1 Aliança, Embrapa 42, IAC 24-Tucuruí and IAC 364-Tucuruí III are the most tolerant to heat stress between the stages double ridge and terminal spikelet; MGS 1 Aliança, BRS 264, IAC 24-Tucuruí, IAC 364-Tucuruí III and VI 98053, between meiosis and anthesis; and BRS 254, IAC-24-Tucuruí, IAC-364-Tucuruí III and VI 98053, between anthesis and physiological maturity. High temperatures reduce grain yield and yield components. The number of grains per spike is the most reduced component under heat stress. The genotypes differed in tolerance to heat stress in different developmental stages.

Formação de estratégia nas micro e pequenas empresas: um estudo no centro-oeste mineiro

Muito se tem dito e escrito sobre as peculiaridades da administração estratégica nas micro e pequenas empresas (MPE). Pouco, entretanto, tem sido feito em termos de trabalho empírico, de cunho quantitativo, quando comparado com o volume de pesquisa que trata de grandes empresas. Nesse sentido, o presente artigo buscou explorar o processo de formação de estratégias nessas empresas, descrevendo seus principais aspectos e, principalmente, verificando se há características desse processo que podem ser associadas a níveis de desempenho acima (e/ou abaixo) da média. Para tanto, utilizou-se a análise de regressão linear múltipla para entender as relações existentes entre as variáveis do processo de formação da estratégia consideradas no estudo e o desempenho; e, ainda, a análise discriminante para determinar os indicadores que diferenciam os grupos de empresas com desempenho acima e abaixo da média. Os resultados apontaram uma tendência à utilização de processos de formação de estratégia deliberados e formais. Por outro lado, reconhecemos também, uma tendência de inovação e mudança. O desempenho acima da média das micro e pequenas empresas, ao que parece, é resultado de uma receita balanceada desses dois ingredientes.

Gestão de capital de giro: contribuição para as micro e pequenas empresas no Brasil

Este artigo trata da importância das questões de capital de giro na gestão das micro e pequenas empresas (MPE) no Brasil. Apresenta-se uma revisão dos conceitos de capital de giro e da importância das MPE no Brasil, além de uma discussão sobre a relevância de uma gestão financeira de curto prazo eficiente para o sucesso de um empreendimento de pequeno porte. Com características bem definidas, as micro e pequenas empresas são responsáveis pela geração da maior parte dos empregos formais no Brasil; apesar disso, ainda não contam com uma estrutura formal de apoio de crédito. O trabalho aponta como fator relevante para o sucesso das micro e pequenas empresas ter um bom gerenciamento do capital de giro. O mau gerenciamento desse fator contribui para o alto índice de mortalidade dessas empresas. Para que o administrador de capital de giro tenha êxito, é importante que haja um forte entrelaçamento com a administração estratégica, para uma solução definitiva do problema, isto é, que consista numa recuperação de lucratividade da empresa e as consequentes recomposições de seu fluxo de caixa, fazendo com que as micro e pequenas empresas consigam chegar à fase de maturidade.

Tecnologia da informação como ferramenta para a análise econômica e financeira em apoio à tomada de decisão para as micro e pequenas empresas

Este artigo apresenta como a tecnologia de informação pode auxiliar na análise econômica e financeira em uma organização, favorecendo a apreciação dos resultados e de seu desempenho, com vistas à garantia da eficiência e da celeridade desse processo, e oferecendo, ainda, visibilidade das demonstrações financeiras para gestores e sócios. Também analisa como a contabilidade gerencial auxilia as micro e pequenas empresas no processo de planejamento e controle, focalizando a estrutura e o funcionamento dos elementos fundamentais para análise das demonstrações financeiras no apoio à decisão.

Estágios de desenvolvimento econômico e políticas públicas de empreendedorismo e de micro, pequenas e médias empresas (MPMEs) em perspectiva comparada: os casos do Brasil, do Canadá, do Chile, da Irlanda e da Itália

Esta pesquisa explora em perspectiva comparada as políticas públicas de empreendedorismo e Micro, Pequenas e Médias Empresas (MPMEs) no Brasil, no Canadá, no Chile e na Itália. A hipótese fundamental é que economias no estágio de inovação tendem a desenvolver mais políticas de empreendedorismo do que as de países no estágio da eficiência. Da mesma forma, países no estágio de inovação tendem a usar menos instrumentos de políticas de MPMEs do que países em estágio de eficiência, quase sempre para incentivar grupos, setores ou regiões em específico. O artigo contribui com a literatura de empreendedorismo ao analisar na prática a convergência/divergência das escolhas de política pública e estágio de desenvolvimento.

Dificuldades e perspectivas no acesso de micro e pequenas empresas a linhas de crédito públicas: o caso de Chapecó

Estas linhas se constituem em políticas que pretendem promover o desenvolvimento econômico e social através da geração de trabalho e renda. Este artigo tem como objetivo analisar se as linhas de crédito públicas - Proger e BNDES/Finame - foram acessadas pelas microempresas no município de Chapecó (SC), suas dificuldades e perspectivas. Caracteriza-se como um estudo exploratório descritivo, com abordagem qualitativa. Do universo investigado constatou-se um baixo índice de acesso, existindo mais dificuldades do que perspectivas concretas de que essas linhas se constituam em políticas de inclusão social que promovam o desenvolvimento para o município e região. A ausência de informações dos públicos-alvo a serem beneficiados por essas políticas mostra a necessidade de reformular as diretrizes de exigência necessárias para o acesso ao crédito.